DIN EN 1915-1:2001-06
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
AIRCRAFT GROUND SUPPORT EQUIPMENT - GENERAL REQUIREMENTS - PART 1: BASIC SAFETY REQUIREMENTS
Hardcopy , PDF
07-03-2021
English
01-01-2001
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 List of hazards
4.1 Hazards generated by radiation
5 Safety requirements and/or protective measures
5.1 General
5.2 Accommodation for driver and any other person
5.3 Driver's cabin
5.4 Controls
5.5 Monitoring devices and displays
5.6 Steering devices
5.7 Brakes for travelling purposes or equivalent devices
5.8 Wheel assemblies - Centre split rims
5.9 Touchable surfaces - Exhaust
5.10 Lights and reflectors for traffic purposes
5.11 Auditory/acoustic warning devices
5.12 Standing areas and walkways on GSE
5.13 Steps, crossings
5.14 Crushing and shearing points
5.15 Securing of load
5.16 Moveable bodies, assemblies and attachments
5.17 Hydraulic and pneumatic systems
5.18 Stability and strength
5.19 Lifting systems
5.20 Lifting devices
5.21 Lifting/work platforms
5.22 Operating speeds
5.23 Towing couplings, drawbars and towbars
5.24 Service connections
5.25 Electrical design, components and batteries
5.26 Fire protection
6 Information for use
6.1 Marking
6.2 Instructions
7 Verification of safety requirements and/or measures
Annex A (informative) - Trilingual list of GSE
Annex B (normative) - Design of service brakes
Annex C (normative) - Steps on GSE
Annex D (informative) - Examples of safety measures to reduce
the risk of crushing and shearing under
the load carrier when it is not possible
to meet the requirements in 5.14
Annex E (informative) - Examples for hose and fittings installation
Annex ZA (informative) - Relationship between this European
Standard and the Essential Requirements
of EU Directive 98/37/EC
Annex ZB (informative) - Relationship between this European
Standard and the Essential Requirements
of EU Directive 2006/42/EC
Bibliography
National Annex NA (informative) - Bibliography
Defines GSE when used in civil air transport as intended by the manufacturer and contains safety requirements relating to the equipment in general.
| DevelopmentNote |
Suspended until publication of a revised English text, due to a new German edition. (05/2013)
|
| DocumentType |
Standard
|
| Pages |
44
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Superseded
|
| Standards | Relationship |
| ONORM EN 1915-1 : 2013 | Identical |
| SN EN 1915-1 : 2013 | Identical |
| NEN EN 1915-1 : 2013 | Identical |
| EN 1915-1:2013 | Identical |
| BS EN 1915-1:2013 | Identical |
| UNI EN 1915-1 : 2014 | Identical |
| NF EN 1915-1 : 2013 | Identical |
| NS EN 1915-1 : 2013 | Identical |
| I.S. EN 1915-1:2013 | Identical |
| NBN EN 1915-1 : 2013 | Identical |
| UNE-EN 1915-1:2013 | Identical |
| EN 294:1992/AC:1993 | SAFETY OF MACHINERY - SAFETY DISTANCES TO PREVENT DANGER ZONES BEING REACHED BY THE UPPER LIMBS |
| EN 894-3:2000+A1:2008 | Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 3: Control actuators |
| ISO 6966-1:2005 | Aircraft ground equipment — Basic requirements — Part 1: General design requirements |
| EN 982:1996+A1:2008 | Safety of machinery - Safety requirements for fluid power systems and their components - Hydraulics |
| EN 1915-3:2004+A1:2009 | Aircraft ground support equipment - General requirements - Part 3: Vibration measurement methods and reduction |
| EN 1037:1995+A1:2008 | Safety of machinery - Prevention of unexpected start-up |
| EN 547-2:1996+A1:2008 | Safety of machinery - Human body measurements - Part 2: Principles for determining the dimensions required for access openings |
| EN 1088:1995+A2:2008 | Safety of machinery - Interlocking devices associated with guards - Principles for design and selection |
| EN 1570:1998+A2:2009 | Safety requirements for lifting tables |
| IEC 60073:2002 | Basic and safety principles for man-machine interface, marking and identification - Coding principles for indicators and actuators |
| ISO 3411:2007 | Earth-moving machinery Physical dimensions of operators and minimum operator space envelope |
| EN ISO 3411:2007 | Earth-moving machinery - Physical dimensions of operators and minimum operator space envelope (ISO 3411:2007) |
| ISO 7250:1996 | Basic human body measurements for technological design |
| EN 60073:2002 | Basic and safety principles for man-machine interface, marking and identification - Coding principles for indicators and actuators |
| EN ISO 3457:2008 | Earth-moving machinery - Guards - Definitions and requirements (ISO 3457:2003) |
| ISO 13732-1:2006 | Ergonomics of the thermal environment — Methods for the assessment of human responses to contact with surfaces — Part 1: Hot surfaces |
| ISO 4413:2010 | Hydraulic fluid power General rules and safety requirements for systems and their components |
| ISO 7715:1985 | Air cargo equipment — Ground handling and transport systems for unit load devices — Minimum requirements |
| EN 811 : 1996 | SAFETY OF MACHINERY - SAFETY DISTANCES TO PREVENT DANGER ZONES BEING REACHED BY THE LOWER LIMBS |
| EN 349:1993+A1:2008 | Safety of machinery - Minimum gaps to avoid crushing of parts of the human body |
| IEC 60204-1:2016 | Safety of machinery - Electrical equipment of machines - Part 1: General requirements |
| EN 547-1:1996+A1:2008 | Safety of machinery - Human body measurements - Part 1: Principles for determining the dimensions required for openings for whole body access into machinery |
| SAE AIR1558B | Interface Protective Devices - Ground Equipment to Aircraft |
| EN ISO 13850:2015 | Safety of machinery - Emergency stop function - Principles for design (ISO 13850:2015) |
| EN 1050 : 1996 | SAFETY OF MACHINERY - PRINCIPLES FOR RISK ASSESSMENT |
| EN ISO 7731:2008 | Ergonomics - Danger signals for public and work areas - Auditory danger signals (ISO 7731:2003) |
| EN 614-1:2006+A1:2009 | Safety of machinery - Ergonomic design principles - Part 1: Terminology and general principles |
| EN 1915-4:2004+A1:2009 | Aircraft ground support equipment - General requirements - Part 4: Noise measurement methods and reduction |
| ISO 7731:2003 | Ergonomics Danger signals for public and work areas Auditory danger signals |
| EN 574:1996+A1:2008 | Safety of machinery - Two-hand control devices - Functional aspects - Principles for design |
| ISO 3795:1989 | Road vehicles, and tractors and machinery for agriculture and forestry — Determination of burning behaviour of interior materials |
| EN ISO 13732-1:2008 | Ergonomics of the thermal environment - Methods for the assessment of human responses to contact with surfaces - Part 1: Hot surfaces (ISO 13732-1:2006) |
| IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
| EN 953:1997+A1:2009 | Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards |
| ISO 4116:1986 | Air cargo equipment — Ground equipment requirements for compatibility with aircraft unit load devices |
| SAE ARP1247D | Aircraft Ground Support Equipment — General Requirements |
| ISO 3457:2003 | Earth-moving machinery — Guards — Definitions and requirements |
| EN 1915-2:2001+A1:2009 | Aircraft ground support equipment - General requirements - Part 2: Stability and strength requirements, calculations and test methods |
| ISO 12100-2:2003 | Safety of machinery Basic concepts, general principles for design Part 2: Technical principles |
| EN ISO 6682:2008 | Earth-moving machinery - Zones of comfort and reach for controls (ISO 6682:1986, including Amd 1:1989) |
| EN 983:1996+A1:2008 | Safety of machinery - Safety requirements for fluid power systems and their components - Pneumatics |
| EN 954-1 : 1996 | SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 1: GENERAL PRINCIPLES FOR DESIGN |
| SAE AIR1375D | Minimum Safety Requirements for Special Purpose Airline Ground Support Equipment |
| ISO 12100-1:2003 | Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology |
| EN ISO 7250 : 1997 | BASIC HUMAN BODY MEASUREMENTS FOR TECHNOLOGICAL DESIGN |
| EN 60529:1991/AC:2016-12 | DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015) |
| ISO 7000:2014 | Graphical symbols for use on equipment Registered symbols |
| EN 60204-1 : 2006 COR 2010 | SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS |
| EN 894-1:1997+A1:2008 | Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 1: General principles for human interactions with displays and control actuators |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.