DIN EN ISO 5349-1:2001-12
Current
The latest, up-to-date edition.
MECHANICAL VIBRATIONS - MEASUREMENT AND EVALUATION OF HUMAN EXPOSURE TO HAND-TRANSMITTED VIBRATION - PART 1: GENERAL REQUIREMENTS
Hardcopy , PDF
German, English
01-01-2001
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and symbols
3.1 Terms and definitions
3.2 Symbols
4 Characterization of hand-transmitted vibration
4.1 General consideration
4.2 Measuring equipment for hand-transmitted vibration
4.3 Coupling of the hand to the vibration source
4.4 Quantity to be measured
4.5 Multi-axis vibration
5 Characterization of hand-transmitted vibration exposure
5.1 General
5.2 Daily exposure duration
5.3 Daily vibration exposure
6 Information to be reported
Annex A (normative) Frequency-weighting and band-limiting
filters
Annex B (informative) Guidance on health effects of
hand-transmitted vibration
Annex C (informative) Relationship between vibration
exposure and effects on health
Annex D (informative) Factors likely to influence the
effects of human exposure to hand-transmitted
vibration in working conditions
Annex E (informative) Preventive measures to be adopted by
those responsible for occupational health and safety
Annex F (informative) Guidelines for reporting additional
information
Bibliography
Describes requirement for measuring and reporting hand-transmitted vibration exposure in three orthogonal axes. Also defines frequency weighting and band-limiting filters for uniform comparison of measurements. Applicable to periodic and to random or non-periodic vibration and to repeated shock type excitation (impact).
DevelopmentNote |
Supersedes DIN V ENV 25349 (12/2001)
|
DocumentType |
Standard
|
Pages |
30
|
PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
Status |
Current
|
Supersedes |
Standards | Relationship |
UNE-EN ISO 5349-1:2002 | Identical |
UNI EN ISO 5349-1 : 2004 | Identical |
NEN EN ISO 5349-1 : 2001 | Identical |
NBN EN ISO 5349-1 : 2001 | Identical |
SN EN ISO 5349-1 : 2001 | Identical |
BS EN ISO 5349-1:2001 | Identical |
I.S. EN ISO 5349-1:2002 | Identical |
NF EN ISO 5349-1 : 2002 | Identical |
ISO 5349-1:2001 | Identical |
EN ISO 5349-1:2001 | Identical |
NS EN ISO 5349-1 : 1ED 2001 | Identical |
DIN EN ISO 28927-4:2011-05 | HAND-HELD PORTABLE POWER TOOLS - TEST METHODS FOR EVALUATION OF VIBRATION EMISSION - PART 4: STRAIGHT GRINDERS |
DIN EN ISO 8041-1:2017-10 | HUMAN RESPONSE TO VIBRATION - MEASURING INSTRUMENTATION - PART 1: GENERAL PURPOSE VIBRATION METERS (ISO 8041-1:2017) |
DIN ISO 14835-1:2005-12 | MECHANICAL VIBRATION AND SHOCK - COLD PROVOCATION TESTS FOR THE ASSESSMENT OF PERIPHERAL VASCULAR FUNCTION - PART 1: MEASUREMENT AND EVALUATION OF FINGER SKIN TEMPERATURE |
DIN EN ISO 28927-10:2011-07 | Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 10: Percussive drills, hammers and breakers (ISO 28927-10:2011) |
DIN EN ISO 18397:2016-09 | DENTISTRY - POWERED SCALER (ISO 18397:2016) |
DIN EN ISO 8041:2006-06 | HUMAN RESPONSE TO VIBRATION - MEASURING INSTRUMENTATION |
DIN EN ISO 28927-11:2011-05 | Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 11: Stone hammers (ISO 28927-11:2011) |
VDI 2057 Blatt 2:2016-03 | Human exposure to mechanical vibrations - Hand-arm vibration |
DIN EN ISO 5349-2:2015-12 | MECHANICAL VIBRATION - MEASUREMENT AND EVALUATION OF HUMAN EXPOSURE TO HAND-TRANSMITTED VIBRATION - PART 2: PRACTICAL GUIDANCE FOR MEASUREMENT AT THE WORKPLACE (ISO 5349-2:2001 + AMD 1:2015) |
DIN EN ISO 28927-12:2013-02 | Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 12: Die grinders (ISO 28927-12:2012) |
DIN EN 61260:2003-03 | ELECTROACOUSTICS - OCTAVE-BAND AND FRACTIONAL-OCTAVE-BAND FILTERS |
ISO 5349-2:2001 | Mechanical vibration Measurement and evaluation of human exposure to hand-transmitted vibration Part 2: Practical guidance for measurement at the workplace |
DIN EN ISO 5349-2:2015-12 | MECHANICAL VIBRATION - MEASUREMENT AND EVALUATION OF HUMAN EXPOSURE TO HAND-TRANSMITTED VIBRATION - PART 2: PRACTICAL GUIDANCE FOR MEASUREMENT AT THE WORKPLACE (ISO 5349-2:2001 + AMD 1:2015) |
ISO 10819:2013 | Mechanical vibration and shock — Hand-arm vibration — Measurement and evaluation of the vibration transmissibility of gloves at the palm of the hand |
CR 1030-1:1995 | Hand-arm vibration - Guidelines for vibration hazards reduction - Part 1: Engineering methods by design of machinery |
ISO 2041:2009 | Mechanical vibration, shock and condition monitoring Vocabulary |
ENV 28041 : DRAFT 1993 | HUMAN RESPONSE TO VIBRATION - MEASURING INSTRUMENTATION |
ISO 8041:2005 | Human response to vibration Measuring instrumentation |
DIN V ENV 28041 : 93 AMD 1 2001 | HUMAN RESPONSE TO VIBRATION; MEASURING INSTRUMENTATION |
ISO 5348:1998 | Mechanical vibration and shock Mechanical mounting of accelerometers |
DIN V 45695:1996-04 | HAND-ARM VIBRATION - GUIDELINES FOR VIBRATION HAZARDS REDUCTION - ENGINEERING AND MANAGEMENT MEASURES |
IEC 61260:1995 | Electroacoustics - Octave-band and fractional-octave-band filters |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.