DIN EN ISO 62:2008-05
Current
The latest, up-to-date edition.
PLASTICS - DETERMINATION OF WATER ABSORPTION
Hardcopy , PDF
English
01-01-2008
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Vorwort
Einleitung
1 Anwendungsbereich
2 Normative Verweisungen
3 Kurzbeschreibung
4 Prüfeinrichtung
5 Probekörper
5.1 Allgemeines
5.2 Quadratische Probekörper bei homogenen Kunststoffen
5.3 Probekörper von verstärkten Kunststoffen, bei denen
anisotrope Diffusionserscheinungen zu berücksichtigen
sind
5.4 Röhrenförmige Probekörper
5.5 Stabförmige Probekörper
5.6 Probekörper aus Fertigprodukten, Strangpressteilen,
Platten und Laminaten
6 Prüfbedingungen und Durchführung
6.1 Allgemeines
6.2 Allgemeine Bedingungen
6.3 Verfahren 1: Bestimmung der Wasseraufnahme nach
dem Eintauchen in Wasser von 23 grad C
6.4 Verfahren 2: Bestimmung der Wasseraufnahme nach
dem Eintauchen in siedendes Wasser
6.5 Verfahren 3: Bestimmung des Verlustes an
wasserlöslichen Bestandteilen während des
Eintauchens
6.6 Verfahren 4: Bestimmung der Wasseraufnahme nach
Lagerung bei 50% relativer Luftfeuchte
7 Auswertung
7.1 Massenanteil des aufgenommenen Wassers in Prozent
7.2 Bestimmung des Wassergehaltes bei Sättigung und des
Diffusionskoeffizienten unter Anwendung der
Fickschen Gesetze
8 Präzision
9 Prüfbericht
Anhang A (informativ) Korrelation zwischen der Wasseraufnahme
der Probekörper und den Fickschen Diffusionsgesetzen
A.1 Allgemeines
A.2 Bestimmung von D und c[s] vor dem Erreichen der
Massekonstanz
A.3 Überprüfung der Korrelation mit den Fickschen
Diffusionsgesetzen
Anhang B (informativ) Angaben zur Präzision
B.1 Ringversuch
B.2 Trocknen der Probekörper
B.3 Bestimmung der Wasseraufnahme nach dem Eintauchen
in Wasser bei 23 grad C (Verfahren 1)
B.4 Bestimmung der Wasseraufnahme nach Lagerung bei
einer relativen Luftfeuchte von 50% (Verfahren 4)
Literaturhinweise
This standard is included in DIN Handbook 490/2, KUNSTSTOFFE BAND 2 and BAND 3. Specifies a procedure for determining the moisture absorption properties in the "through-the-thickness" direction of flat or curved-form solid plastics.
| DevelopmentNote |
Supersedes DIN 53495 and DIN 53473 (09/1999)
|
| DocumentType |
Standard
|
| Pages |
21
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| ISO 62:2008 | Identical |
| NEN EN ISO 62 : 2008 | Identical |
| NS EN ISO 62 : 2ED 2008 | Identical |
| I.S. EN ISO 62:2008 | Identical |
| UNE-EN ISO 62:2008 | Identical |
| SN EN ISO 62:2008 | Identical |
| UNI EN ISO 62 : 2008 | Identical |
| BS EN ISO 62:1999 | Identical |
| EN ISO 62:2008 | Identical |
| DIN HDBK KUNSTSTOFFE BAND 2 : 2017 | HANDBUCH KUNSTSTOFFE - BAND 2 - CHEMISCHE UND OPTISCHE GEBRAUCHSEIGENSCHAFTEN, VERARBEITUNGSEIGENSCHAFTEN - PRUEFNORMEN |
| DIN HDBK 490/2 : 1ED 2012 | |
| DIN EN ISO 16396-2:2017-07 | Plastics - Polyamide (PA) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 16396-2:2017) |
| DIN EN ISO 15103-2:2007-09 | PLASTICS - POLY(PHENYLENE ETHER) (PPE) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| DIN EN ISO 3672-2:2002-07 | PLASTICS - UNSATURATED-POLYESTER RESINS (UP-R) - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| DIN EN ISO 19069-2:2016-07 | PLASTICS - POLYPROPYLENE (PP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 19069-2:2016) |
| DIN EN ISO 1874-2:2013-03 | PLASTICS - POLYAMIDE (PA) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 1874-2:2012) |
| DIN EN ISO 14530-2:2000-08 | Plastics - Unsaturated-polyester powder moulding compounds (UP-PMCs) - Part 2: Preparation of test specimens and determination of properties (ISO 14530-2:1999); German version EN ISO 14530-2:1999 |
| VDI 3822 Blatt 2.1.8:2012-01 | Failure analysis - Defects of thermoplastic products made of plastics caused by weather-induced stress |
| VDI/VDE 2251 Blatt 8:2007-09 | Precision engineering components - Adhesive connections |
| DIN 6701-3:2015-12 | ADHESIVE BONDING OF RAILWAY VEHICLES AND PARTS - PART 3: GUIDELINE FOR CONSTRUCTION DESIGN AND VERIFICATION OF BONDS ON RAILWAY VEHICLES |
| DIN EN ISO 1622-2:1999-10 | PLASTICS - POLYSTYRENE (PS) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| DIN EN ISO 3673-2:2012-10 | Plastics - Epoxy resins - Part 2: Preparation of test specimens and determination of properties of crosslinked epoxy resins (ISO 3673-2:2012) |
| DIN EN ISO 9988-2:2015-05 | PLASTICS - POLYOXYMETHYLENE (POM) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 9988-2:2006) |
| DIN SPEC 91326:2016-09 | FIRE RETARDANT, MULTIAXIAL REINFORCED COMPOSITE PARTS, MANUFACTURED IN VACUUM PROCESS TECHNOLOGIES FOR RAILWAY VEHICLE APPLICATIONS |
| DIN EN ISO 20028-2:2015-08 (Draft) | PLASTICS - THERMOPLASTIC POLYESTER (TP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 20028-2:2017) |
| DIN EN ISO 15512:2016-06 (Draft) | PLASTICS - DETERMINATION OF WATER CONTENT (ISO 15512:2016) |
| DIN EN ISO 7823-3:2007-08 | Plastics - Poly(methyl methacrylate) sheets - Types, dimensions and characteristics - Part 3: Continuous cast sheets (ISO 7823-3:2007) |
| DIN EN ISO 17855-2:2016-06 | PLASTICS - POLYETHYLENE (PE) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 17855-2:2016) |
| DIN EN ISO 25137-2:2016-08 (Draft) | PLASTICS - SULFONE POLYMER MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 25137-2:2009) |
| DIN EN ISO 7792-2:2013-03 | PLASTICS - THERMOPLASTIC POLYESTER (TP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 7792-2:2012) |
| ISO 294-3:2002 | Plastics Injection moulding of test specimens of thermoplastic materials Part 3: Small plates |
| DIN EN ISO 294-3:2003-12 | PLASTICS - INJECTION MOULDING OF TEST SPECIMENS OF THERMOPLASTIC MATERIALS - PART 3: SMALL PLATES |
| ISO 175:2010 | Plastics Methods of test for the determination of the effects of immersion in liquid chemicals |
| ISO 2818:1994 | Plastics — Preparation of test specimens by machining |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.