IEC 60243-1:2013
|
Electric strength of insulating materials - Test methods - Part 1: Tests at power frequencies |
IEC 60695-11-20:2015
|
Fire hazard testing - Part 11-20: Test flames - 500 W flame test method |
IEC 60112:2003+AMD1:2009 CSV
|
Method for the determination of the proof and the comparative tracking indices of solid insulating materials |
ISO 2719:2016
|
Determination of flash point Pensky-Martens closed cup method |
ISO 6603-2:2000
|
Plastics — Determination of puncture impact behaviour of rigid plastics — Part 2: Instrumented impact testing |
ISO 2535:2001
|
Plastics Unsaturated-polyester resins Measurement of gel time at ambient temperature |
DIN EN ISO 604 E : 2003
|
PLASTICS - DETERMINATION OF COMPRESSIVE PROPERTIES |
ISO 2114:2000
|
Plastics (polyester resins) and paints and varnishes (binders) Determination of partial acid value and total acid value |
ISO 3521:1997
|
Plastics — Unsaturated polyester and epoxy resins — Determination of overall volume shrinkage |
ISO 3167:2014
|
Plastics Multipurpose test specimens |
IEC 60250:1969
|
Recommended methods for the determination of the permittivity and dielectric dissipation factor of electrical insulating materials at power, audio and radio frequencies including metre wavelengths |
DIN IEC 60093 : 1993
|
METHODS OF TEST FOR INSULATING MATERIALS FOR ELECTRICAL PURPOSES; VOLUME RESISTIVITY AND SURFACE RESISTIVITY OF SOLID ELECTRICAL INSULATING MATERIALS |
ISO 3219:1993
|
Plastics — Polymers/resins in the liquid state or as emulsions or dispersions — Determination of viscosity using a rotational viscometer with defined shear rate |
ISO 14848:1998
|
Plastics — Unsaturated-polyester resins — Determination of reactivity at 130 degrees C |
EN 59:2016
|
Glass reinforced plastics - Determination of indentation hardness by means of a Barcol hardness tester |
ISO 6271:2015
|
Clear liquids Estimation of colour by the platinum-cobalt colour scale |
DIN EN ISO 2818:1997-06
|
PLASTICS - PREPARATION OF TEST SPECIMENS BY MACHINING |
ISO 10350-1:2017
|
Plastics — Acquisition and presentation of comparable single-point data — Part 1: Moulding materials |
DIN EN 60243-1 : 2014
|
ELECTRIC STRENGTH OF INSULATING MATERIALS - TEST METHODS - PART 1: TESTS AT POWER FREQUENCIES (IEC 60243-1:2013) |
ISO 8256:2004
|
Plastics — Determination of tensile-impact strength |
ISO 11359-2:1999
|
Plastics Thermomechanical analysis (TMA) Part 2: Determination of coefficient of linear thermal expansion and glass transition temperature |
ISO 3672-1:2000
|
Plastics Unsaturated-polyester resins (UP-R) Part 1: Designation system |
DIN EN ISO 527-2:2012-06
|
Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics (ISO 527-2:2012) |
DIN EN 60695-11-20 : 2016
|
FIRE HAZARD TESTING - PART 11-20: TEST FLAMES - 500 W FLAME TEST METHODS (IEC 60695-11-20:2015 + COR1:2016) |
DIN EN ISO 178 E : 2013
|
PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES (ISO 178:2010 + AMD.1:2013) |
ISO 75-2:2013
|
Plastics — Determination of temperature of deflection under load — Part 2: Plastics and ebonite |
ISO 527-2:2012
|
Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion plastics |
ISO 11357-2:2013
|
Plastics Differential scanning calorimetry (DSC) Part 2: Determination of glass transition temperature and glass transition step height |
ISO 1523:2002
|
Determination of flash point — Closed cup equilibrium method |
ISO 4615:1979
|
Plastics Unsaturated polyesters and epoxide resins Determination of total chlorine content |
IEC 60296:2012 RLV
|
Fluids for electrotechnical applications - Unused mineral insulating oils for transformers and switchgear |
DIN EN ISO 3672-1 E : 2002
|
PLASTICS - UNSATURATED-POLYESTER RESINS (UP-R) - PART 1: DESIGNATION SYSTEM |
ISO 4630:2015
|
Clear liquids Estimation of colour by the Gardner colour scale |
IEC 60093:1980
|
Methods of test for volume resistivity and surface resistivity of solid electrical insulating materials |
ISO 2554:1997
|
Plastics — Unsaturated polyester resins — Determination of hydroxyl value |
DIN ISO 6271:1999-01
|
CLEAR LIQUIDS - ESTIMATION OF COLOUR BY THE PLATINUM-COBALT SCALE |
ISO 2577:2007
|
Plastics Thermosetting moulding materials Determination of shrinkage |
ISO 1675:1985
|
Plastics — Liquid resins — Determination of density by the pyknometer method |
DIN ISO 4630 E : 1999
|
BINDERS FOR PAINTS AND VARNISHES - ESTIMATION OF COLOUR OF CLEAR LIQUIDS BY THE GARDNER COLOUR SCALE |
DIN EN ISO 291 E : 2008
|
PLASTICS - STANDARD ATMOSPHERES FOR CONDITIONING AND TESTING |
IEC 60695-11-10:2013
|
Fire hazard testing - Part 11-10: Test flames - 50 W horizontal and vertical flame test methods |
ISO 291:2008
|
Plastics Standard atmospheres for conditioning and testing |
ISO 604:2002
|
Plastics — Determination of compressive properties |
DIN EN ISO 4589-2 E : 2006
|
PLASTICS - DETERMINATION OF BURNING BEHAVIOUR BY OXYGEN INDEX - PART 2: AMBIENT-TEMPERATURE TEST (ISO 4589-2:2017) |
ISO 179-1:2010
|
Plastics — Determination of Charpy impact properties — Part 1: Non-instrumented impact test |
ISO 62:2008
|
Plastics Determination of water absorption |
DIN EN ISO 62:2008-05
|
PLASTICS - DETERMINATION OF WATER ABSORPTION |
ISO 4589-2:2017
|
Plastics — Determination of burning behaviour by oxygen index — Part 2: Ambient-temperature test |
ISO 2818:1994
|
Plastics — Preparation of test specimens by machining |
DIN EN ISO 527-1:2012-06
|
PLASTICS - DETERMINATION OF TENSILE PROPERTIES - PART 1: GENERAL PRINCIPLES (ISO 527-1:2012) |
DIN EN ISO 291:2008-08
|
PLASTICS - STANDARD ATMOSPHERES FOR CONDITIONING AND TESTING |
ISO 4901:2011
|
Reinforced plastics based on unsaturated-polyester resins Determination of the residual styrene monomer content, as well as the content of other volatile aromatic hydrocarbons, by gas chromatography |
ISO 760:1978
|
Determination of water Karl Fischer method (General method) |
ISO 178:2010
|
Plastics Determination of flexural properties |
DIN ISO 6271 E : 1999
|
CLEAR LIQUIDS - ESTIMATION OF COLOUR BY THE PLATINUM-COBALT SCALE |
DIN EN ISO 6603-2 E : 2002
|
DETERMINATION OF MULTIAXIAL IMPACT BEHAVIOUR OF RIGID PLASTICS - PART 2: INSTRUMENTED PUNCTURE TEST |
ISO 527-1:2012
|
Plastics Determination of tensile properties Part 1: General principles |