EN 10107:2014
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
Grain-oriented electrical steel strip and sheet delivered in the fully processed state
30-09-2014
26-03-2014
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Classification and designation
5 Information to be supplied by
the purchaser
6 General requirements
7 Technical requirements
8 Inspection and testing
9 Marking, labelling and packaging
10 Complaints
Annex A (informative) - Maximum specific
total loss at 60 Hz and 1,7 T
Bibliography
This European Standard defines the steel grades of grain-oriented electrical strip and sheet in nominal thicknesses of 0,23 mm, 0,27 mm, 0,30 mm and 0,35 mm and specifies in particular, general requirements, magnetic properties, geometric characteristics and tolerances and technological characteristics, as well as inspection procedures.This European Standard applies to Goss textured grain-oriented electrical strip and sheet supplied in the final annealed condition in sheets or coils, and intended for the construction of magnetic circuits.The materials are grouped into two classes:a)conventional grain oriented material;b)high permeability grain oriented material.They correspond to Clause C.22 of IEC 60404-1:2000.
| Committee |
CEN/TC 459/SC 8
|
| DevelopmentNote |
Supersedes PREN 10107. (04/2014)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Withdrawn
|
| Supersedes |
| Standards | Relationship |
| NEN EN 10107 : 2014 | Identical |
| DIN EN 10107:2014-07 | Identical |
| SN EN 10107 : 2014 | Identical |
| NS EN 10107 : 2014 | Identical |
| UNI EN 10107 : 2014 | Identical |
| NBN EN 10107 : 2014 | Identical |
| BS EN 10107:2014 | Identical |
| I.S. EN 10107:2014 | Identical |
| NF EN 10107 : 2014 | Identical |
| PN EN 10107 : 2014 | Identical |
| UNE-EN 10107:2014 | Identical |
| ONORM EN 10107 : 2014 | Identical |
| PD CR 10313:2000 | Classification of grades of steel. Examples of classification related to European standards |
| EN 10079:2007 | Definition of steel products |
| I.S. EN 10342:2005 | MAGNETIC MATERIALS - CLASSIFICATION OF SURFACE INSULATIONS OF ELECTRICAL STEEL SHEET, STRIP AND LAMINATIONS |
| DIN EN 10342:2005-09 | MAGNETIC MATERIALS - CLASSIFICATION OF SURFACE INSULATIONS OF ELECTRICAL STEEL SHEET, STRIP AND LAMINATIONS |
| EN 10140:2006 | Cold rolled narrow steel strip - Tolerances on dimensions and shape |
| 04/30125760 DC : DRAFT NOV 2004 | EN 10342 - MAGNETIC MATERIALS - CLASSIFICATION OF SURFACE INSULATIONS OF ELECTRICAL STEEL SHEET, STRIP AND LAMINATIONS |
| DIN EN 10140:2006-09 | Cold rolled narrow steel strip - Tolerances on dimensions and shape |
| I.S. EN 10303:2015 | THIN MAGNETIC STEEL STRIP AND SHEET FOR USE AT MEDIUM FREQUENCIES |
| I.S. EN 10140:2006 | COLD ROLLED NARROW STEEL STRIP - TOLERANCES ON DIMENSIONS AND SHAPE |
| I.S. EN 10079:2007 | DEFINITION OF STEEL PRODUCTS |
| DIN EN 10303:2016-02 | THIN MAGNETIC STEEL STRIP AND SHEET FOR USE AT MEDIUM FREQUENCIES |
| BS EN 10140:2006 | Cold rolled narrow steel strip. Tolerances on dimensions and shape |
| UNI EN 10079 : 2007 | DEFINITION OF STEEL PRODUCTS |
| BS EN 10303:2015 | Thin magnetic steel strip and sheet for use at medium frequencies |
| UNE-EN 10303:2016 | Thin magnetic steel strip and sheet for use at medium frequencies |
| BS EN 10342:2005 | Magnetic materials. Classification of surface insulations of electrical steel sheet, strip and laminations |
| BS EN 10079:2007 | Definition of steel products |
| S.R. CR 10313:2000 | CLASSIFICATION OF GRADES OF STEEL - EXAMPLES OF CLASSIFICATION RELATED TO EUROPEAN STANDARDS |
| EN 10342:2005 | Magnetic materials - Classification of surface insulations of electrical steel sheet, strip and laminations |
| DIN EN 10079:2007-06 | Definition of steel products |
| EN 10303:2015 | Thin magnetic steel strip and sheet for use at medium frequencies |
| CR 10313:2000 | Classification of grades of steel - Examples of classification related to European Standards |
| EN 10027-2:2015 | Designation systems for steels - Part 2: Numerical system |
| EN 10280:2001+A1:2007 | Magnetic materials - Methods of measurement of the magnetic properties of electrical sheet and strip by means of a single sheet tester |
| IEC 60050-221:1990 | International Electrotechnical Vocabulary (IEV) - Part 221: Magnetic materials and components |
| ISO 7799:1985 | Metallic materials — Sheet and strip 3 mm thick or less — Reverse bend test |
| EN ISO 7799:2000 | Metallic materials - Sheet and strip 3 mm thick or less - Reverse bend test (ISO 7799:1985) |
| EN 10021:2006 | General technical delivery conditions for steel products |
| EN 60404-2:1998/A1:2008 | MAGNETIC MATERIALS - PART 2: METHODS OF MEASUREMENT OF THE MAGNETIC PROPERTIES OF ELECTRICAL STEEL STRIP AND SHEET BY MEANS OF AN EPSTEIN FRAME |
| EN 10282:2001 | Magnetic materials - Method of test for the determination of surface insulation resistance of electrical sheet and strip |
| EN 10204:2004 | Metallic products - Types of inspection documents |
| EN 60404-13 : 2007 | MAGNETIC MATERIALS - PART 13: METHODS OF MEASUREMENT OF DENSITY, RESISTIVITY AND STACKING FACTOR OF ELECTRICAL STEEL SHEET AND STRIP |
| EN 10251:1997 | Magnetic materials - Methods of determination of the geometrical characteristics of electrical steel sheet and strip |
| IEC 60050-121:1998 | International Electrotechnical Vocabulary (IEV) - Part 121: Electromagnetism |
| EN 10027-1:2016 | Designation systems for steels - Part 1: Steel names |
| EN 10342:2005 | Magnetic materials - Classification of surface insulations of electrical steel sheet, strip and laminations |
| IEC 60404-1:2016 | Magnetic materials - Part 1: Classification |
| IEC 60404-2:1996+AMD1:2008 CSV | Magnetic materials - Part 2: Methods of measurement of the magnetic properties of electrical steel strip and sheet by means of an Epstein frame |
| EN 60404-11:2013 | Magnetic materials - Part 11: Method of test for the determination of surface insulation resistance of magnetic sheet and strip |
| IEC 60404-13:1995 | Magnetic materials - Part 13: Methods of measurement of density, resistivity and stacking factor of electrical steel sheet and strip |
| IEC 60404-3:1992+AMD1:2002+AMD2:2009 CSV | Magnetic materials - Part 3: Methods of measurement of the magnetic properties of electrical steel strip and sheet by means of a single sheet tester |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.