|
EN 10113-2 : 1993
|
HOT-ROLLED PRODUCTS IN WELDABLE FINE GRAIN STRUCTURAL STEELS - DELIVERY CONDITIONS FOR NORMALIZED/NORMALIZED ROLLED STEELS |
|
EN 10208-2:2009
|
Steel pipes for pipelines for combustible fluids - Technical delivery conditions - Part 2: Pipes of requirement class B |
|
EN 10107:2014
|
Grain-oriented electrical steel strip and sheet delivered in the fully processed state |
|
EN 10120:2017
|
Steel sheet and strip for welded gas cylinders |
|
EN 10147 : 2000
|
CONTINUOUSLY HOT-DIP ZINC COATED STRUCTURAL STEELS SHEET AND STRIP - TECHNICAL DELIVERY CONDITIONS |
|
EN 10106:2015
|
Cold rolled non-oriented electrical steel strip and sheet delivered in the fully processed state |
|
EN 10152:2017
|
Electrolytically zinc coated cold rolled steel flat products for cold forming - Technical delivery conditions |
|
EN 10028-3:2017
|
Flat products made of steels for pressure purposes - Part 3: Weldable fine grain steels, normalized |
|
EN 10273:2016
|
Hot rolled weldable steel bars for pressure purposes with specified elevated temperature properties |
|
EN 10271:1998
|
Electrolytically zinc-nickel (ZN) coated steel flat products - Technical delivery conditions |
|
EN 10137-3 : 1995
|
PLATES AND WIDE FLATS MADE OF HIGH YIELD STRENGTH STRUCTURAL STEELS IN THE QUENCHED AND TEMPERED OR PRECIPITATION HARDENED CONDITIONS - DELIVERY CONDITIONS FOR PRECIPITATION HARDENED STEELS |
|
EN 10268:2006+A1:2013
|
COLD ROLLED STEEL FLAT PRODUCTS WITH HIGH YIELD STRENGTH FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
|
EN 10142 : 2000
|
CONTINUOUSLY HOT-DIP ZINC COATED LOW CARBON STEELS SHEET AND STRIP FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
|
EN 10028-6:2017
|
Flat products made of steels for pressure purposes - Part 6: Weldable fine grain steels, quenched and tempered |
|
EN 10215 : 1995
|
CONTINUOUSLY HOT-DIP ALUMINIUM-ZINC (AZ) COATED STEEL STRIP AND SHEET - TECHNICAL DELIVERY CONDITIONS |
|
EN 10088-3:2014
|
Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes |
|
EN 10213-2 : 1995
|
TECHNICAL DELIVERY CONDITIONS FOR STEEL CASTINGS FOR PRESSURE PURPOSES - PART 2: STEEL GRADES FOR USE AT ROOM TEMPERATURE AND ELEVATED TEMPERATURES |
|
EN 10111:2008
|
Continuously hot rolled low carbon steel sheet and strip for cold forming - Technical delivery conditions |
|
EN 10087:1998
|
Free-cutting steels - Technical delivery conditions for semi-finished products, hot-rolled bars and rods |
|
EN 10149-2:2013
|
Hot rolled flat products made of high yield strength steels for cold forming - Part 2: Technical delivery conditions for thermomechanically rolled steels |
|
EN 10248-1:1995
|
Hot rolled sheet piling of non alloy steels - Part 1: Technical delivery conditions |
|
EN 10025:1990/A1:1993
|
HOT ROLLED PRODUCTS OF NON-ALLOY STRUCTURAL STEELS - TECHNICAL DELIVERY CONDITIONS |
|
EN 10139:2016
|
Cold rolled uncoated low carbon steel narrow strip for cold forming - Technical delivery conditions |
|
EN 10202:2001/AC:2003
|
COLD REDUCED TINMILL PRODUCTS - ELECTROLYTIC TINPLATE AND ELECTROLYTIC CHROMIUM/CHROMIUM OXIDE COATED STEEL |
|
EN 10205:2016
|
Cold reduced tinmill products - Blackplate |
|
EN 10088-2:2014
|
STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
|
EN 10210-1:2006
|
Hot finished structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions |
|
EN 10028-2:2017
|
Flat products made of steels for pressure purposes - Part 2: Non-alloy and alloy steels with specified elevated temperature properties |
|
EN 10028-7:2016
|
Flat products made of steels for pressure purposes - Part 7: Stainless steels |
|
EN 10267:1998
|
Ferritic-pearlitic steels for precipitation hardening from hot-working temperatures |
|
EN 10154 : 2002
|
CONTINUOUSLY HOT-DIP ALUMINIUM-SILICON (AS) COATED STEEL STRIP AND SHEET - TECHNICAL DELIVERY CONDITIONS |
|
EN 10137-2 : 1995
|
PLATES AND WIDE FLATS MADE OF HIGH YIELD STRENGTH STRUCTURAL STEELS IN THE QUENCHED AND TEMPERED OR PRECIPITATION HARDENED CONDITIONS - DELIVERY CONDITIONS FOR QUENCHED AND TEMPERED STEELS |
|
EN 10165 : 1995
|
COLD ROLLED ELECTRICAL ALLOYED STEEL SHEET AND STRIP DELIVERED IN THE SEMI-PROCESSED STATE |
|
EN 10283:2010
|
Corrosion resistant steel castings |
|
EN 10207:2017
|
Steels for simple pressure vessels - Technical delivery requirements for plates, strips and bars |
|
EN 10016-3:1994
|
Non-alloy steel rod for drawing and/or cold rolling - Part 3: Specific requirements for rimmed and rimmed substitute low carbon steel rod |
|
EN 10028-5:2017
|
Flat products made of steels for pressure purposes - Part 5: Weldable fine grain steels, thermomechanically rolled |
|
EN 10016-2:1994
|
Non-alloy steel rod for drawing and/or cold rolling - Part 2: Specific requirements for general purposes rod |
|
EN 10219-1:2006
|
Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions |
|
EN 10222-3:2017
|
Steel forgings for pressure purposes - Part 3: Nickel steels with specified low temperature properties |
|
EN 10222-5:2017
|
Steel forgings for pressure purposes - Part 5: Martensitic, austenitic and austenitic-ferritic stainless steels |
|
ENV 10080 : 1995
|
STEEL FOR THE REINFORCEMENT OF CONCRETE WELDABLE RIBBED REINFORCING STEEL B500 - TECHNICAL DELIVERY CONDITIONS FOR BARS, COILS AND WELDED FABRIC |
|
EN 10126 : 1995
|
COLD ROLLED ELECTRICAL NON-ALLOYED STEEL SHEET AND STRIP DELIVERED IN THE SEMI-PROCESSED STATE |
|
EN 10222-4:2017
|
Steel forgings for pressure purposes - Part 4: Weldable fine grain steels with high proof strength |
|
EN 10222-2:2017
|
Steel forgings for pressure purposes - Part 2: Ferritic and martensitic steels with specified elevated temperatures properties |
|
EN 10213-3 : 1995
|
TECHNICAL DELIVERY CONDITIONS FOR STEEL CASTINGS FOR PRESSURE PURPOSES - PART 3: STEEL GRADES FOR USE AT LOW TEMPERATURES |
|
EN 10214 : 1995
|
CONTINUOUSLY HOT-DIP ZINC-ALUMINIUM (ZA) COATED STEEL STRIP AND SHEET - TECHNICAL DELIVERY CONDITIONS |
|
EN 10155 : 1993
|
STRUCTURAL STEELS WITH IMPROVED ATMOSPHERIC CORROSION RESISTANCE - TECHNICAL DELIVERY CONDITIONS |
|
EN 10130:2006
|
Cold rolled low carbon steel flat products for cold forming - Technical delivery conditions |
|
EN 10083-1:2006
|
Steels for quenching and tempering - Part 1: General technical delivery conditions |
|
EN 10083-2:2006
|
Steels for quenching and tempering - Part 2: Technical delivery conditions for non alloy steels |
|
EN 10084:2008
|
Case hardening steels - Technical delivery conditions |
|
EN 10016-4:1994
|
Non-alloy steel rod for drawing and/or cold rolling - Part 4: Specific requirements for rod for special applications |
|
EN 10090:1998
|
Valve steels and alloys for internal combustion engines |
|
EN 10203 : 1991
|
COLD REDUCED ELECTROLYTIC TINPLATE |
|
EN 10213-4 : 1995
|
TECHNICAL DELIVERY CONDITIONS FOR STEEL CASTINGS FOR PRESSURE PURPOSES - PART 4: AUSTENITIC AND AUSTENITIC-FERRITIC STEEL GRADES |
|
EN 10249-1:1995
|
Cold formed sheet piling of non alloy steels - Part 1: Technical delivery conditions |
|
EN 10208-1:2009
|
Steel pipes for pipelines for combustible fluids - Technical delivery condi-tions - Part 1: Pipes of requirement class A |
|
EN 10028-4:2017
|
Flat products made of steels for pressure purposes - Part 4: Nickel alloy steels with specified low temperature properties |
|
EN 10265:1995
|
Magnetic materials - Specification for steel sheet and strip with specified mechanical properties and magnetic permeability |
|
EN 10083-3:2006/AC:2008
|
STEELS FOR QUENCHING AND TEMPERING - PART 3: TECHNICAL DELIVERY CONDITIONS FOR ALLOY STEELS |
|
EN 10149-3:2013
|
Hot rolled flat products made of high yield strength steels for cold forming - Part 3: Technical delivery conditions for normalized or normalized rolled steels |
|
EN 10088-1:2014
|
Stainless steels - Part 1: List of stainless steels |
|
EN 10113-3 : 1993
|
HOT ROLLED PRODUCTS IN WELDABLE FINE GRAIN STRUCTURAL STEELS - DELIVERY CONDITIONS FOR THERMOMECHANICAL ROLLED STEELS |
|
EN 10209:2013
|
Cold rolled low carbon steel flat products for vitreous enamelling - Technical delivery conditions |