• EN 12417:2001+A2:2009/AC:2010

    Superseded A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

    MACHINE TOOLS - SAFETY - MACHINING CENTRES

    Available format(s): 

    Superseded date:  23-02-2022

    Language(s): 

    Published date:  12-01-2013

    Publisher:  Comite Europeen de Normalisation

    Pure ENs are not available for sale, please purchase a suitable national adoption

    Sorry this product is not available in your region.

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    Foreword
    Introduction
    1 Scope
    2 Normative references
    3 Terms and definitions
    4 List of significant hazards
    5 Safety requirements and/or protective measures
    6 Verification of safety requirements and/or protective
      measures
    7 Information for use
    Annex A (normative) Guards on machines centres - Impact
            test method
    Annex B (informative) Equipment of test method
    Annex C (informative) Illustrative figures used as examples
    Annex D (normative) Noise emission measurement
    Annex ZA (informative) Relationship between this European
             Standard and the Essential Requirements of EU
             Directive 98/37/EC, amended by Directive 98/79/EC
    Annex ZB (informative) Relationship between this European
             Standard and the Essential Requirements of EU
             Directive 2006/42/EC
    Bibliography

    Abstract - (Show below) - (Hide below)

    Provides the technical safety requirements and protective measures to be adopted by persons undertaking the design, construction and supply of machining centres.

    General Product Information - (Show below) - (Hide below)

    Committee TC 143
    Development Note 2001 Edition Re-Issued in February 2009 & incorporates AMD 2 2009. (03/2009)
    Document Type Standard
    Publisher Comite Europeen de Normalisation
    Status Superseded
    Superseded By

    Standards Referenced By This Book - (Show below) - (Hide below)

    I.S. EN 14070:2003 SAFETY OF MACHINE TOOLS - TRANSFER AND SPECIAL-PURPOSE MACHINES
    EN ISO 23125:2015 Machine tools - Safety - Turning machines (ISO 23125:2015, Corrected version 2016-03-15)
    DIN EN 14070:2009-07 SAFETY OF MACHINE TOOLS - TRANSFER AND SPECIAL-PURPOSE MACHINES
    UNE-EN ISO 23125:2015 Machine tools - Safety - Turning machines (ISO 23125:2015, Corrected version 2016-03-15)
    UNI EN 14070 : 2009 SAFETY OF MACHINE TOOLS - TRANSFER AND SPECIAL-PURPOSE MACHINES
    07/30166811 DC : 0 BS EN ISO 23125 - SAFETY OF MACHINE TOOLS - TURNING MACHINES
    BS EN ISO 23125:2015 Machine tools. Safety. Turning machines
    BS EN 12840:2001 Safety of machine tools. Manually controlled turning machines with or without automatic control
    ISO 23125:2015 Machine tools Safety Turning machines
    BS EN 14070 : 2003 SAFETY OF MACHINE TOOLS - TRANSFER AND SPECIAL-PURPOSE MACHINES
    EN 14070:2003+A1:2009/AC:2010 SAFETY OF MACHINE TOOLS - TRANSFER AND SPECIAL-PURPOSE MACHINES
    I.S. EN ISO 23125:2015 MACHINE TOOLS - SAFETY - TURNING MACHINES (ISO 23125:2015)

    Standards Referencing This Book - (Show below) - (Hide below)

    EN 294:1992/AC:1993 SAFETY OF MACHINERY - SAFETY DISTANCES TO PREVENT DANGER ZONES BEING REACHED BY THE UPPER LIMBS
    EN 1127-1:2011 Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodology
    EN ISO 11204:2010 Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections (ISO 11204:2010)
    EN 894-3:2000+A1:2008 Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 3: Control actuators
    EN 418 : 1992 SAFETY OF MACHINERY - EMERGENCY STOP EQUIPMENT, FUNCTIONAL ASPECTS - PRINCIPLES FOR DESIGN
    EN 982:1996+A1:2008 Safety of machinery - Safety requirements for fluid power systems and their components - Hydraulics
    EN 1037:1995+A1:2008 Safety of machinery - Prevention of unexpected start-up
    EN 12626 : 1997 SAFETY OF MACHINERY - LASER PROCESSING MACHINES - SAFETY REQUIREMENTS
    EN 547-2:1996+A1:2008 Safety of machinery - Human body measurements - Part 2: Principles for determining the dimensions required for access openings
    EN 12413:2007+A1:2011 Safety requirements for bonded abrasive products
    ISO 11161:2007 Safety of machinery — Integrated manufacturing systems — Basic requirements
    EN 60825-1:2014/AC:2017-06 SAFETY OF LASER PRODUCTS - PART 1: EQUIPMENT CLASSIFICATION AND REQUIREMENTS (IEC 60825-1:2014)
    EN 1088:1995+A2:2008 Safety of machinery - Interlocking devices associated with guards - Principles for design and selection
    ISO 513:2012 Classification and application of hard cutting materials for metal removal with defined cutting edges — Designation of the main groups and groups of application
    EN 894-2:1997+A1:2008 Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 2: Displays
    IEC 61000-6-2:2016 Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity standard for industrial environments
    ISO 7250:1996 Basic human body measurements for technological design
    EN 614-2:2000+A1:2008 Safety of machinery - Ergonomic design principles - Part 2: Interactions between the design of machinery and work tasks
    EN 1837:1999+A1:2009 Safety of machinery - Integral lighting of machines
    EN 999:1998+A1:2008 Safety of machinery - The positioning of protective equipment in respect of approach speeds of parts of the human body
    EN 349:1993+A1:2008 Safety of machinery - Minimum gaps to avoid crushing of parts of the human body
    IEC 60204-1:2016 Safety of machinery - Electrical equipment of machines - Part 1: General requirements
    EN 547-1:1996+A1:2008 Safety of machinery - Human body measurements - Part 1: Principles for determining the dimensions required for openings for whole body access into machinery
    EN 12415:2000/A1:2002 SAFETY OF MACHINE TOOLS - SMALL NUMERICALLY CONTROLLED TURNING MACHINES AND TURNING CENTRES
    EN 1550:1997+A1:2008 Machine-tools safety - Safety requirements for the design and construction of work holding chucks
    EN 1760-1:1997+A1:2009 Safety of machinery - Pressure sensitive protective devices - Part 1: General principles for the design and testing of pressure sensitive mats and pressure sensitive floors
    EN 1050 : 1996 SAFETY OF MACHINERY - PRINCIPLES FOR RISK ASSESSMENT
    EN 614-1:2006+A1:2009 Safety of machinery - Ergonomic design principles - Part 1: Terminology and general principles
    EN 292-1 : 1991 SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - BASIC TERMINOLOGY, METHODOLOGY
    ISO 7731:2003 Ergonomics Danger signals for public and work areas Auditory danger signals
    EN 574:1996+A1:2008 Safety of machinery - Two-hand control devices - Functional aspects - Principles for design
    EN ISO 15641:2001 Milling cutters for high speed machining - Safety requirements (ISO 15641:2001)
    EN 50081-2:1993 Electromagnetic compatibility - Generic emission standard - Part 2: Industrial environment
    ISO 15641:2001 Milling cutters for high speed machining — Safety requirements
    EN ISO 3746:2010 Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Survey method using an enveloping measurement surface over a reflecting plane (ISO 3746:2010)
    EN 61496-1:2013/AC:2015 SAFETY OF MACHINERY - ELECTRO-SENSITIVE PROTECTIVE EQUIPMENT - PART 1: GENERAL REQUIREMENTS AND TESTS (IEC 61496-1:2012)
    EN 61000-6-2:2005/corrigendum:2005 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-2: GENERIC STANDARDS - IMMUNITY FOR INDUSTRIAL ENVIRONMENTS (IEC 61000-6-2:2005)
    EN ISO 3744:2010 Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for an essentially free field over a reflecting plane (ISO 3744:2010)
    EN 953:1997+A1:2009 Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards
    EN 547-3:1996+A1:2008 Safety of machinery - Human body measurements - Part 3: Anthropometric data
    IEC 61496-1:2012 Safety of machinery - Electro-sensitive protective equipment - Part 1: General requirements and tests
    PREN 13236 : DRAFT 2017 SAFETY REQUIREMENTS FOR SUPERABRASIVE PRODUCTS
    EN 983:1996+A1:2008 Safety of machinery - Safety requirements for fluid power systems and their components - Pneumatics
    EN 954-1 : 1996 SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 1: GENERAL PRINCIPLES FOR DESIGN
    EN 292-2 : 91 AMD 1 95 SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - TECHNICAL PRINCIPLES AND SPECIFICATION
    EN ISO 4871:2009 Acoustics - Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996)
    EN ISO 7250 : 1997 BASIC HUMAN BODY MEASUREMENTS FOR TECHNOLOGICAL DESIGN
    EN 626-1:1994+A1:2008 Safety of machinery - Reduction of risks to health from hazardous substances emitted by machinery - Part 1: Principles and specifications for machinery manufacturers
    ISO 2806:1994 Industrial automation systems — Numerical control of machines — Vocabulary
    EN 60529:1991/AC:2016-12 DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015)
    ISO 11553:1996 Safety of machinery — Laser processing machines — Safety requirements
    EN 457 : 1992 SAFETY OF MACHINERY - AUDITORY DANGER SIGNALS - GENERAL REQUIREMENTS, DESIGN AND TESTING
    EN ISO 11688-1:2009 Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 1: Planning (ISO/TR 11688-1:1995)
    ISO/TR 11688-2:1998 Acoustics Recommended practice for the design of low-noise machinery and equipment Part 2: Introduction to the physics of low-noise design
    IEC 61000-6-2 : 3.0:2016 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-2: GENERIC STANDARDS - IMMUNITY STANDARD FOR INDUSTRIAL ENVIRONMENTS
    EN ISO 9614-1:2009 Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 1: Measurement at discrete points (ISO 9614-1:1993)
    EN ISO 11202:2010 Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections (ISO 11202:2010)
    ISO 683-1:2016 Heat-treatable steels, alloy steels and free-cutting steels Part 1: Non-alloy steels for quenching and tempering
    IEC 61496-2:2013 Safety of machinery - Electro-sensitive protective equipment - Part 2: Particular requirements for equipment using active opto-electronic protective devices (AOPDs)
    EN 692:2005+A1:2009 Machine tools - Mechanical presses - Safety
    EN 60204-1 : 2006 COR 2010 SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS
    EN 894-1:1997+A1:2008 Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 1: General principles for human interactions with displays and control actuators
    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective