• Shopping Cart
    There are no items in your cart

EN 13071 : 2002

Superseded

Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

SELECTIVE WASTE COLLECTION CONTAINERS - ABOVE-GROUND MECHANICALLY-LIFTED CONTAINERS WITH CAPACITIES FROM 80 L TO 5000 L FOR SELECTIVE COLLECTION OF WASTE

Superseded date

01-06-2008

Published date

13-02-2002

Sorry this product is not available in your region.

Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 General requirements
   4.1 General requirements for Type A containers
        4.1.1 Design
        4.1.2 Loading height
        4.1.3 External surfaces/Edges
   4.2 General requirements for Type B containers
5 Test conditions
   5.1 General
   5.2 Temperature requirements
   5.3 Waste densities
6 Test procedures for Type A containers
   6.1 Test procedures on empty containers
        6.1.1 Stability test procedures
        6.1.2 Resistance to interior impacts (only for
               containers for glass)
        6.1.3 Free fall test
   6.2 Tests on loaded containers
        6.2.1 Test load
        6.2.2 Stability test
        6.2.3 Verification of resistance to exterior
               impacts
   6.3 Miscellaneous tests
        6.3.1 Emptying mechanism/Locking system (container
               loaded)
        6.3.2 Mechanical resistance of the lifting
               components
        6.3.3 Measurement of the sound level emitted by
               the falling of glass inside the containers
               (for volumes greater or equal to 500 l)
        6.3.4 Corrosion
        6.3.5 Weathering (for thermoplastics only)
   6.4 Sequence of tests
7 Data sheet
8 Marking and user information
   8.1 Marking
   8.2 User information
9 Test report
Annex A (normative) Noise test method for containers for
        waste glass collection (Type A and Type B, 500 l)
   A.1 Application field
   A.2 Definitions
   A.3 Test location
        A.3.1 Test location criterion
        A.3.2 Background noise criterion and correction
   A.4 Apparatus
        A.4.1 Test bottle
        A.4.2 Instrumentation
   A.5 Test method
   A.6 Measurement of sound pressure levels
        A.6.1 Measurement surface - positions and number
               of measuring points
        A.6.2 Measurement
   A.7 Calculation of surface sound pressure level and of
        A-weighted sound power level
        A.7.1 A-weighted surface sound pressure level
        A.7.2 Calculation of A-weighted sound power level
   A.8 Measurement uncertainty
   A.9 Information to be recorded
   A.10 Information to be reported
Annex B (normative) Weathering tests
Bibliography

Defines the requirements for above-ground containers, mechanically lifted and emptied, used for the selective collection of solid non-hazardous waste, with capacities from 80 l to 5000 l.

Committee
TC 183
DocumentType
Standard
PublisherName
Comite Europeen de Normalisation
Status
Superseded

Standards Relationship
UNI EN 13071 : 2002 Identical
I.S. EN 13071:2002 Identical
SN EN 13071 : 2002 Identical
NS EN 13071 : 1ED 2002 Identical
NBN EN 13071 : 2002 Identical
NEN EN 13071 : 2002 Identical
PN EN 13071 : 2004 Identical
BS EN 13071:2002 Identical
UNE-EN 13071:2002 Identical
NF EN 13071 : 2002 Identical
DIN EN 13071:2002-05 Identical

BS EN 1501-3:2008 Refuse collection vehicles and their associated lifting devices. General requirements and safety requirements Front loaded refuse collection vehicles
I.S. EN 1501-3:2008 REFUSE COLLECTION VEHICLES AND THEIR ASSOCIATED LIFTING DEVICES - GENERAL REQUIREMENTS AND SAFETY REQUIREMENTS - PART 3: FRONT LOADED REFUSE COLLECTION VEHICLES
DIN EN 1501-3:2010-06 Refuse collection vehicles and their associated lifting devices - General requirements and safety requirements - Part 3: Front loaded refuse collection vehicles
BS EN 1501-2 : 2005 REFUSE COLLECTION VEHICLES AND ASSOCIATED LIFTING DEVICES - GENERAL REQUIREMENTS AND SAFETY REQUIREMENTS - PART 2: SIDE LOADED REFUSE COLLECTION VEHICLES
I.S. EN 1501-2:2005 REFUSE COLLECTION VEHICLES AND ASSOCIATED LIFTING DEVICES - GENERAL REQUIREMENTS AND SAFETY REQUIREMENTS - PART 2: SIDE LOADED REFUSE COLLECTION VEHICLES
UNI EN 1501-2 : 2010 REFUSE COLLECTION VEHICLES AND ASSOCIATED LIFTING DEVICES - GENERAL REQUIREMENTS AND SAFETY REQUIREMENTS - PART 2: SIDE LOADED REFUSE COLLECTION VEHICLES
UNI EN 1501-3 : 2008 REFUSE COLLECTION VEHICLES AND THEIR ASSOCIATED LIFTING DEVICES - GENERAL REQUIREMENTS AND SAFETY REQUIREMENTS - PART 3: FRONT LOADED REFUSE COLLECTION VEHICLES
DIN EN 1501-2:2010-02 Refuse collection vehicles and their associated lifting devices - General requirements and safety requirements - Part 2: Side loaded refuse collection vehicles (includes Amendment A1:2009)
EN 1501-2:2005+A1:2009 Refuse collection vehicles and associated lifting devices - General requirements and safety requirements - Part 2: Side loaded refuse collection vehicles
EN 1501-3:2008 Refuse collection vehicles and their associated lifting devices - General requirements and safety requirements - Part 3: Front loaded refuse collection vehicles
UNE-EN 1501-2:2006 Refuse collection vehicles and associated lifting devices - General requirements and safety requirements - Part 2: Side loaded refuse collection vehicles

EN 12574-1:2017 Stationary waste containers - Part 1: Containers with a capacity up to 10 000 l with flat or dome lid(s), for trunnion, double trunnion or pocket lifting device - Dimensions and design
ISO 3744:2010 Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for an essentially free field over a reflecting plane
EN 840-4:2012 Mobile waste and recycling containers - Part 4: Containers with 4 wheels with a capacity up to 1 700 l with flat lid(s), for wide trunnion or BG- and/or wide comb lifting devices - Dimensions and design
EN 22244 : 1992 PACKAGING - COMPLETE, FILLED TRANSPORT PACKAGES - HORIZONTAL IMPACT TESTS (HORIZONTAL OR INCLINED PLANE TEST - PENDULUM TEST)
EN 840-3:2012 Mobile waste and recycling containers - Part 3: Containers with 4 wheels with a capacity up to 1 300 l with dome lid(s), for trunnion and/or comb lifting devices - Dimensions and design
EN 12574-3:2017 Stationary waste containers - Part 3: Safety and health requirements
ISO 2244:2000 Packaging Complete, filled transport packages and unit loads Horizontal impact tests
EN 12574-2:2017 Stationary waste containers - Part 2: Performance requirements and test methods
EN 840-1:2012 Mobile waste and recycling containers - Part 1: Containers with 2 wheels with a capacity up to 400 l for comb lifting devices - Dimensions and design
EN 22248:1992 Packaging - Complete, filled transport packages - Vertical impact test by dropping (ISO 2248:1985)
EN ISO 3744:2010 Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for an essentially free field over a reflecting plane (ISO 3744:2010)
ISO 877:1994 Plastics Methods of exposure to direct weathering, to weathering using glass-filtered daylight, and to intensified weathering by daylight using Fresnel mirrors
ISO 9227:2017 Corrosion tests in artificial atmospheres — Salt spray tests
ISO 4892-2:2013 Plastics — Methods of exposure to laboratory light sources — Part 2: Xenon-arc lamps
EN ISO 877:1996 Plastics - Methods of exposure to direct weathering, to weathering using glass-filtered daylight, and to intensified weathering by daylight using Fresnel mirrors (ISO 877:1994)
EN 840-2:2012 Mobile waste and recycling containers - Part 2: Containers with 4 wheels with a capacity up to 1 300 l with flat lid(s), for trunnion and/or comb lifting devices - Dimensions and design
ISO 2248:1985 Packaging Complete, filled transport packages Vertical impact test by dropping
ISO 48:2010 Rubber, vulcanized or thermoplastic Determination of hardness (hardness between 10 IRHD and 100 IRHD)
EN ISO 4892-2:2013 Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps (ISO 4892-2:2013)
EN 840-5:2012 Mobile waste and recycling containers - Part 5: Performance requirements and test methods
EN 840-6:2012 Mobile waste and recycling containers - Part 6: Safety and health requirements

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.