Skip to content
Please enter a keyword to search

  • EN 13361:2018

    Current The latest, up-to-date edition.

    Geosynthetic barriers - Characteristics required for use in the construction of reservoirs and dams

    Available format(s): 

    Language(s): 

    Published date:  14-03-2018

    Publisher:  Comite Europeen de Normalisation

    Pure ENs are not available for sale, please purchase a suitable national adoption

    Sorry this product is not available in your region.

    Add To Cart

    Abstract - (Show below) - (Hide below)

    This document specifies the characteristics of geosynthetic barriers, including polymeric geosynthetic barriers, clay geosynthetic barriers and bituminous geosynthetic barriers, when used as fluid barriers and separation layer for water, in the construction of reservoirs and dams, and the appropriate test methods to determine these characteristics.The intended use of these products is to control the leakage of potable, fresh or saline water through the construction.This document is not applicable to geotextiles or geotextile-related products, as defined in EN ISO 10318 1.This document provides for the assessment and verification of constancy of performance (AVCP) of the product to this European Standard including factory production control procedures.This document defines characteristics to be considered with regard to the presentation of performance.NOTEWhere potable water is or can be in direct contact with the product, other relevant standards, requirements and/or regulations can be considered for the design.

    General Product Information - (Show below) - (Hide below)

    Development Note Supersedes PREN 13361. (03/2018)
    Document Type Standard
    Publisher Comite Europeen de Normalisation
    Status Current
    Supersedes

    Standards Referencing This Book - (Show below) - (Hide below)

    EN 13265:2016 Geotextiles and geotextile-related products - Characteristics required for use in liquid waste containment projects
    EN 14576:2005 Geosynthetics - Test method for determining the resistance of polymeric geosynthetic barriers to environmental stress cracking
    EN 14575:2005 Geosynthetic barriers - Screening test method for determining the resistance to oxidation
    EN 12226:2012 Geosynthetics - General tests for evaluation following durability testing
    EN ISO 1183-3 : 1999 PLASTICS - METHODS FOR DETERMINING THE DENSITY OF NON-CELLULAR PLASTICS - PART 3: GAS PYKNOMETER METHOD
    EN 14150:2006 Geosynthetic barriers - Determination of permeability to liquids
    ISO 13438:2004 Geotextiles and geotextile-related products Screening test method for determining the resistance to oxidation
    EN ISO 10319:2015 Geosynthetics - Wide-width tensile test (ISO 10319:2015)
    ISO 527-4:1997 Plastics Determination of tensile properties Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites
    CEN/TS 14418:2014 Geosynthetic Barriers - Test method for the determination of the influence of freezing-thawing cycles on the permeability of clay geosynthetic barriers
    ASTM D 6141 : 2014-07 GUIDE FOR SCREENING CLAY PORTION AND INDEX FLUX OF GEOSYNTHETIC CLAY LINER (GCL) FOR CHEMICAL COMPATIBILITY TO LIQUIDS
    EN 13251:2016 Geotextiles and geotextile-related products - Characteristics required for use in earthworks, foundations and retaining structures
    EN 13249:2016 Geotextiles and geotextile-related products - Characteristics required for use in the construction of roads and other trafficked areas (excluding railways and asphalt inclusion)
    ISO 12236:2006 Geosynthetics — Static puncture test (CBR test)
    EN 1849-2:2009 Flexible sheets for waterproofing - Determination of thickness and mass per unit area - Part 2: Plastic and rubber sheets
    EN ISO 527-4:1997 PLASTICS - DETERMINATION OF TENSILE PROPERTIES - PART 4: TEST CONDITIONS FOR ISOTROPIC AND ORTHOTROPIC FIBRE-REINFORCED PLASTIC COMPOSITES
    ISO 1133-1:2011 Plastics Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics Part 1: Standard method
    EN 495-5:2013 Flexible sheets for waterproofing - Determination of foldability at low temperature - Part 5: Plastic and rubber sheets for roof waterproofing
    ISO 9863-1:2016 Geosynthetics Determination of thickness at specified pressures Part 1: Single layers
    EN 14151:2010 Geosynthetics - Determination of burst strength
    EN 13253:2016 Geotextiles and geotextile-related products - Characteristics required for use in erosion control works (coastal protection, bank revetments)
    ISO 10319:2015 Geosynthetics — Wide-width tensile test
    EN 13250:2016 Geotextiles and geotextile-related products - Characteristics required for use in the construction of railways
    EN 12224 : 2000 GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - DETERMINATION OF THE RESISTANCE TO WEATHERING
    EN 12311-2:2013 Flexible sheets for waterproofing - Determination of tensile properties - Part 2: Plastic and rubber sheets for roof waterproofing
    EN ISO 527-1:2012 Plastics - Determination of tensile properties - Part 1: General principles (ISO 527-1:2012)
    EN 13255:2016 Geotextiles and geotextile-related products - Characteristics required for use in the construction of canals
    EN 13254:2016 Geotextiles and geotextile-related products - Characteristics required for the use in the construction of reservoirs and dams
    EN 12311-1:1999 Flexible sheets for waterproofing - Part 1: Bitumen sheets for roof waterproofing - Determination of tensile properties
    EN 12310-1:1999 Flexible sheets for waterproofing - Part 1: Bitumen sheets for waterproofing - Determination of resistance to tearing (nail shank)
    EN 14414 : 2004 GEOSYNTHETICS - SCREENING TEST METHOD FOR DETERMINING CHEMICAL RESISTANCE FOR LANDFILL APPLICATIONS
    ISO 12957-1:2005 Geosynthetics Determination of friction characteristics Part 1: Direct shear test
    EN 16416:2013 Geosynthetic clay barriers - Determination of water flux index - Flexible wall permeameter method at constant head
    EN 1109:2013 Flexible sheets for waterproofing - Bitumen sheets for roof waterproofing - Determination of flexibility at low temperature
    CEN/TS 14417:2014 Geosynthetic barriers - Test method for the determination of the influence of wetting-drying cycles on the permeability of clay geosynthetic barriers
    EN ISO 10318-1:2015 Geosynthetics - Part 1: Terms and definitions (ISO 10318-1:2015)
    EN ISO 1133-1:2011 Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 1: Standard method (ISO 1133-1:2011)
    ASTM D 696 : 2016 : REDLINE Standard Test Method for Coefficient of Linear Thermal Expansion of Plastics Between −30°C and 30°C with a Vitreous Silica Dilatometer
    EN ISO 12957-2:2005 Geosynthetics - Determination of friction characteristics - Part 2: Inclined plane test (ISO 12957-2:2005)
    ISO 12957-2:2005 Geosynthetics — Determination of friction characteristics — Part 2: Inclined plane test
    ISO 1183-1:2012 Plastics Methods for determining the density of non-cellular plastics Part 1: Immersion method, liquid pyknometer method and titration method
    EN 12225 : 2000 GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - METHOD FOR DETERMINING THE MICROBIOLOGICAL RESISTANCE BY A SOIL BURIAL TEST
    EN 14196:2016 Geosynthetics - Test methods for measuring mass per unit area of clay geosynthetic barriers
    EN 1296:2000 Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roofing - Method of artificial ageing by long term exposure to elevated temperature
    ISO 1183-2:2004 Plastics Methods for determining the density of non-cellular plastics Part 2: Density gradient column method
    ISO 1183-3:1999 Plastics Methods for determining the density of non-cellular plastics Part 3: Gas pyknometer method
    ASTM D 7409 : 2015 : REDLINE Standard Test Method for Carboxyl End Group Content of Polyethylene Terephthalate (PET) Yarns
    EN ISO 9864:2005 Geosynthetics - Test method for the determination of mass per unit area of geotextiles and geotextile-related products (ISO 9864:2005)
    EN ISO 9863-1:2016 Geosynthetics - Determination of thickness at specified pressures - Part 1: Single layers (ISO 9863-1:2016)
    ISO 11357-6:2008 Plastics Differential scanning calorimetry (DSC) Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)
    ISO 3696:1987 Water for analytical laboratory use — Specification and test methods
    EN 13256:2016 Geotextiles and geotextile-related products - Characteristics required for use in the construction of tunnels and underground structures
    EN ISO 3696:1995 Water for analytical laboratory use - Specification and test methods (ISO 3696:1987)
    EN 1849-1:1999 Flexible sheets for waterproofing - Determination of thickness and mass per unit area - Part 1: Bitumen sheets for roof waterproofing
    EN ISO 12236:2006 Geosynthetics - Static puncture test (CBR test) (ISO 12236:2006)
    EN 13257:2016 Geotextiles and geotextile-related products - Characteristics required for use in solid waste disposals
    ISO 527-3:1995 Plastics Determination of tensile properties Part 3: Test conditions for films and sheets
    EN ISO 527-3:1995/AC:2002 PLASTICS - DETERMINATION OF TENSILE PROPERTIES - PART 3: TEST CONDITIONS FOR FILMS AND SHEETS
    EN 13252:2016 Geotextiles and geotextile-related products - Characteristics required for use in drainage systems
    ISO 9864:2005 Geosynthetics — Test method for the determination of mass per unit area of geotextiles and geotextile-related products
    EN ISO 1183-1:2012 Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pyknometer method and titration method (ISO 1183-1:2012)
    CEN/TS 14416:2014 Geosynthetic barriers - Test method for determining the resistance to roots
    EN 14415:2004 Geosynthetic barriers - Test method for determining the resistance to leaching
    ISO 527-1:2012 Plastics Determination of tensile properties Part 1: General principles
    EN ISO 1183-2:2004 PLASTICS - METHODS FOR DETERMINING THE DENSITY OF NON-CELLULAR PLASTICS - PART 2: DENSITY GRADIENT COLUMN METHOD
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective