• There are no items in your cart

EN 14879-3:2006

Current

Current

The latest, up-to-date edition.

Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 3: Coatings on concrete components

Published date

06-12-2006

Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Surface protection systems and selection criteria
  Surface protection types and system
  4.1 Surface protection types and system
  4.2 Selection criteria
      4.2.1 General
      4.2.2 Exposing media
      4.2.3 Type and frequency of fluid loading
      4.2.4 Thermal loading
      4.2.5 Changes in temperature
      4.2.6 Mechanical loading
      4.2.7 Weather factors
      4.2.8 Additional requirements
  4.3 Load profile
5 Coatings
  5.1 Concrete structure and surface appearance
  5.2 Coating materials
  5.3 Coating system
      5.3.1 General
      5.3.2 Properties of coatings
      5.3.3 Impregnating agents
      5.3.4 Primers
      5.3.5 Intermediate layers
      5.3.6 Trowelled coatings
      5.3.7 Self-levelling coatings
      5.3.8 Laminate layer
      5.3.9 Top coat
      5.3.10 Waterproofing layer
      5.3.11 Screed
      5.3.12 Sealant
  5.4 Coating system components
      5.4.1 General
      5.4.2 Binders
      5.4.3 Fillers and aggregates
      5.4.4 Reinforcing materials
      5.4.5 Processing aids
  5.5 Reinforcing materials for laminate layers
  5.6 Reinforcing materials for top coats
  5.7 Coatings
  5.8 Safety measures for storage, processing and waste
      disposal
6 Designations
7 Testing
  7.1 General
  7.2 Suitability testing
  7.3 Receiving inspection of coating materials
      7.3.1 General
      7.3.2 Marking
      7.3.3 Viscosity
      7.3.4 Density
      7.3.5 Colour
      7.3.6 Non-volatile matter content
      7.3.7 Binders
  7.4 Tests during application of coating
      7.4.1 General
      7.4.2 Suitability of concrete surface
      7.4.3 Ambient conditions
      7.4.4 Coating process
      7.4.5 Individual layer thickness
  7.5 Acceptance testing
      7.5.1 General
      7.5.2 Testing of coated component parts
      7.5.3 Testing carried out on test panels
  7.6 Inspection report
8 Suitability verification and tests
  8.1 Requirements
      8.1.1 General
      8.1.2 Fluid load, chemical resistance and tightness
      8.1.3 Thermal loads
      8.1.4 Temperature change loads
      8.1.5 Mechanical loads
      8.1.6 Anti-slip properties
      8.1.7 Crack bridging
      8.1.8 Adhesion strength
      8.1.9 Ageing behaviour
      8.1.10 Weathering behaviour
      8.1.11 Concrete compatibility
      8.1.12 Behaviour in cleaning and neutralisation
             processes
      8.1.13 Behaviour against micro-organisms
      8.1.14 Electrostatic dissipating capability
      8.1.15 Behaviour in fire
  8.2 Tests
      8.2.1 General
      8.2.2 Coatings
Annex A (informative) Specimen form
Annex B (informative) Selection criteria for surface
        protection systems
B.1 Load profiles and suitable surface protection
    systems for floors and walls
B.2 Load profiles and suitable surface protection
    systems for secondary containments
B.3 Load profiles and suitable protection for production
    plant floors
B.4 Load profiles and suitable protection for gutters,
    trenches, pipes etc.
B.5 Load profiles and suitable protection for containers
Annex C (informative) Acceptance inspection report
Annex D (normative) Overview of verification of suitability
        for coatings
Annex E (normative) Test fluid groups for verification of
        suitability for material/media combinations
Annex F (normative) Manufacture of test panels for coatings
Annex G (normative) Testing the electrostatic dissipation
        capability
      G.1 General
          G.1.1 Dissipation resistance
          G.1.2 Ground dissipating resistance
      G.2 Testing the dissipation resistance of test samples
          G.2.1 Instruments
          G.2.2 Test procedure
          G.2.3 Test report
      G.3 Measuring the ground dissipation resistance on the
          laid surface protection system
          G.3.1 Instruments
          G.3.2 Preparation
          G.3.3 Test procedure
          G.3.4 Test report
Annex H (informative) Information to be given by the coating
        material manufacturer
A-Deviation: National deviation due to regulations, the
             alteration of which is for the time being outside
             the competence of the CEN/CENELEC member
Bibliography

This European Standard specifies the requirements for and methods of testing of organic coatings which are applied to concrete process engineering equipment that will come in contact with aggressive chemical substances (liquids, solids and gases). The requirements specified here may be used for the purposes of quality control (e.g. as agreed between the contract partners).The standard does not cover coatings as in EN ISO 12944-1, but it does apply to coatings which serve one or more of the following purposes:-to protect the component from damaging effects of aggressive substances;-to protect waters (e.g. ground water) from harmful substances;-to protect the charge from becoming contaminated by components released from the substrate material;-to achieve a particular surface properties.The different coating systems are:a)impregnation, seals, thin coatings (applied by brushing, spraying or rolling);b)high-build coatings (applied by brushing, spraying, rolling, trowelling or pouring (self-levelling));c)laminate coatings;d)resinous screed;e)mastic asphalt screed with a waterproofing layer;f)combinations of the above coatings.Table 1 shows the coating methods to be employed for various types of concrete members.Handling of aggressive or water pollutant materials is understood to include:storage;1)filling;2)loading and unloading;3)manufacture;4)treatment;5)use.

Committee
CEN/TC 360
DocumentType
Standard
PublisherName
Comite Europeen de Normalisation
Status
Current

BS EN 14879-5:2007 Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media Linings on concrete components
09/30200088 DC : 0 BS EN 14879-6 - ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 6: COMBINED LININGS WITH TILE AND BRICK LAYERS
DIN EN 14879-6:2010-04 Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 6: Combined linings with tile and brick layers
NF EN 14879-6 : 2010 ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 6: COMBINED LININGS WITH TILE AND BRICK LAYERS
BS EN 14879-6:2009 Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media Combined linings with tile and brick layers
UNI EN 14879-6 : 2010 ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 6: COMBINED LININGS WITH TILE AND BRICK LAYERS
06/30155368 DC : 0 PREN 14879-6 - ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 6: COMBINED LININGS WITH TILE AND BRICK LAYERS
I.S. EN 14879-6:2009 ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 6: COMBINED LININGS WITH TILE AND BRICK LAYERS
EN 14879-5:2007 Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 5: Linings on concrete components
EN 14879-6:2009 Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 6: Combined linings with tile and brick layers
DIN EN 14879-5:2007-10 Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 5: Linings on concrete components

ISO 2811-1:2016 Paints and varnishes — Determination of density — Part 1: Pycnometer method
EN 13687-3:2002 Products and systems for the protection and repair of concrete structures - Test methods - Determination of thermal compatibility - Part 3: Thermal cycling without de-icing salt impact
EN 228:2012+A1:2017 Automotive fuels - Unleaded petrol - Requirements and test methods
EN ISO 2431:2011 Paints and varnishes - Determination of flow time by use of flow cups (ISO 2431:2011)
EN 14879-1:2005 Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 1: Terminology, design and preparation of substrate
ISO 3219:1993 Plastics — Polymers/resins in the liquid state or as emulsions or dispersions — Determination of viscosity using a rotational viscometer with defined shear rate
ISO 2811-3:2011 Paints and varnishes — Determination of density — Part 3: Oscillation method
ISO 2808:2007 Paints and varnishes Determination of film thickness
EN 59:2016 Glass reinforced plastics - Determination of indentation hardness by means of a Barcol hardness tester
EN ISO 4625-1:2006 Binders for paints and varnishes - Determination of softening point - Part 1: Ring-and-ball method (ISO 4625-1:2004)
EN 1767:1999 Products and systems for the protection and repair of concrete structures - Test methods - Infrared analysis
EN ISO 2811-2:2011 Paints and varnishes - Determination of density - Part 2: Immersed body (plummet) method (ISO 2811-2:2011)
EN 977:1997 Underground tanks of glass-reinforced plastics (GRP) - Method for one side exposure to fluids
EN ISO 2409:2013 Paints and varnishes - Cross-cut test (ISO 2409:2013)
PREN 14879-6 : DRAFT 2009 ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 6: COMBINED LININGS WITH TILE AND BRICK LAYERS
ISO 3882:2003 Metallic and other inorganic coatings — Review of methods of measurement of thickness
EN 13238:2010 Reaction to fire tests for building products - Conditioning procedures and general rules for selection of substrates
EN ISO 3251:2008 Paints, varnishes and plastics - Determination of non-volatile-matter content (ISO 3251:2008)
ISO 4625-1:2004 Binders for paints and varnishes Determination of softening point Part 1: Ring-and-ball method
EN ISO 2811-1:2016 Paints and varnishes - Determination of density - Part 1: Pycnometer method (ISO 2811-1:2016)
EN ISO 2811-3:2011 Paints and varnishes - Determination of density - Part 3: Oscillation method (ISO 2811-3:2011)
DIN 51130:2014-02 Testing of floor coverings - Determination of the anti-slip property - Workrooms and fields of activities with slip danger - Walking method - Ramp test
EN ISO 3882:2003 Metallic and other inorganic coatings - Review of methods of measurement of thickness (ISO 3882:2003)
IEC 60167:1964 Methods of test for the determination of the insulation resistance of solid insulating materials
ISO 4624:2016 Paints and varnishes — Pull-off test for adhesion
IEC 60093:1980 Methods of test for volume resistivity and surface resistivity of solid electrical insulating materials
EN 12620:2002+A1:2008 Aggregates for concrete
EN 13318:2000 Screed material and floor screeds - Definitions
ISO 2811-2:2011 Paints and varnishes Determination of density Part 2: Immersed body (plummet) method
ISO 175:2010 Plastics Methods of test for the determination of the effects of immersion in liquid chemicals
EN ISO 3219:1994 Plastics - Polymers/resins in the liquid state or as emulsions or dispersions - Determination of viscosity using a rotational viscometer with defined shear rate (ISO 3219:1993)
ISO 291:2008 Plastics Standard atmospheres for conditioning and testing
EN ISO 4624:2016 Paints and varnishes - Pull-off test for adhesion (ISO 4624:2016)
ISO 2815:2003 Paints and varnishes Buchholz indentation test
ISO 6272-1:2011 Paints and varnishes — Rapid-deformation (impact resistance) tests — Part 1: Falling-weight test, large-area indenter
ISO 2559:2011 Textile glass Mats (made from chopped or continuous strands) Designation and basis for specifications
EN ISO 2815:2003 Paints and varnishes - Buchholz indentation test (ISO 2815:2003)
EN ISO 291:2008 Plastics - Standard atmospheres for conditioning and testing (ISO 291:2008)
ISO 3251:2008 Paints, varnishes and plastics Determination of non-volatile-matter content
EN 12350-1:2009 Testing fresh concrete - Part 1: Sampling
ISO 554:1976 Standard atmospheres for conditioning and/or testing — Specifications
EN ISO 868:2003 Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness) (ISO 868:2003)
ISO 2409:2013 Paints and varnishes Cross-cut test
EN 1081:1998 Resilient floor coverings - Determination of the electrical resistance
EN 1766:2017 Products and systems for the protection and repair of concrete structures - Test methods - Reference concretes for testing
EN ISO 6272-1:2011 Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 1: Falling-weight test, large-area indenter (ISO 6272-1:2011)
EN ISO 2808:2007 Paints and varnishes - Determination of film thickness (ISO 2808:2007)
EN ISO 175:2010 Plastics - Methods of test for the determination of the effects of immersion in liquid chemicals (ISO 175:2010)
EN 13813:2002 Screed material and floor screeds - Screed material - Properties and requirements
ISO 868:2003 Plastics and ebonite — Determination of indentation hardness by means of a durometer (Shore hardness)
ISO 2431:2011 Paints and varnishes Determination of flow time by use of flow cups

Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.