• EN 13898:2003+A1:2009/AC:2010

    Superseded A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

    MACHINE TOOLS - SAFETY - SAWING MACHINES FOR COLD METAL

    Available format(s): 

    Superseded date:  01-04-2017

    Language(s): 

    Published date:  12-01-2013

    Publisher:  Comite Europeen de Normalisation

    Pure ENs are not available for sale, please purchase a suitable national adoption

    Sorry this product is not available in your region.

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    Foreword
    0 Introduction
    1 Scope
    2 Normative references
    3 Terms and definitions
    4 List of significant hazards
    5 Safety requirements and/or protective measures
      5.1 General
      5.2 Machine type-specific clauses
      5.3 Protection against common mechanical hazards
      5.4 Type-specific safeguarding requirements
           additional to those defined in 5.3
      5.5 Other mechanical hazards
      5.6 Electrical hazards caused by direct and indirect
           contact
      5.7 Thermal hazards
      5.8 Hazards generated by noise
      5.9 Hazards generated by vibration
      5.10 Hazards generated by materials or substances
           processed
      5.11 Hazards generated by neglect of ergonomic
           principles in machinery design
      5.12 Unexpected startup unexpected overrun/over-speed
      5.13 Errors of fitting
      5.14 Falling or ejected objects or fluids
      5.15 Loss of stability/overturning of machinery
      5.16 Slip, trip and fall of persons
    6 Verification of safety requirements and/or measures
    7 Information for use
      7.1 Marking
      7.2 Instruction handbook
      7.3 Noise declaration
    Annex A (normative) - Noise emission measurement
    Annex B (normative) - Recommended test conditions for
            measurement of noise level at sawing machines
            and work material specifications
      B.1 Recommended test conditions for measurement of
          noise level at sawing machines
      B.2 Work material specifications
    Annex C (informative) - Examples of sawing machines types
    Annex D (informative) - Examples of guarding solutions for
            sawing machines
    Annex ZA (informative) - Relationship between this European
             Standard and the Essential Requirements of EU
             Directive 98/37/EC, amended by Directive 98/79/EC
    Annex ZB (informative) - Relationship between this European
             Standard and the Essential Requirements of EU
             Directive 2006/42/EC
    Bibliography

    Abstract - (Show below) - (Hide below)

    Describes the safety requirements and measures to be adopted by persons undertaking the design, construction and supply (including installation, setting-up, maintenance, and repair) of machines whose primary intended use is for sawing cold metal (ferrous and non-ferrous), or material partly of cold metal, by means of a saw blade.

    General Product Information - (Show below) - (Hide below)

    Committee TC 143
    Development Note 2003 Edition Re-Issued in February 2009 & incorporates AMD 1 2009. (03/2009)
    Document Type Standard
    Publisher Comite Europeen de Normalisation
    Status Superseded
    Superseded By

    Standards Referenced By This Book - (Show below) - (Hide below)

    I.S. EN 14070:2003 SAFETY OF MACHINE TOOLS - TRANSFER AND SPECIAL-PURPOSE MACHINES
    BS EN 61029-2-1:2012 SAFETY OF TRANSPORTABLE MOTOR-OPERATED ELECTRIC TOOLS - PART 2-1: PARTICULAR REQUIREMENTS FOR CIRCULAR SAW BENCHES
    DIN EN 14070:2009-07 SAFETY OF MACHINE TOOLS - TRANSFER AND SPECIAL-PURPOSE MACHINES
    EN 61029-2-1:2012 SAFETY OF TRANSPORTABLE MOTOR-OPERATED ELECTRIC TOOLS - PART 2-1: PARTICULAR REQUIREMENTS FOR CIRCULAR SAW BENCHES (IEC 61029-2-1:1993, MODIFIED + A1:1999 + A2:2001)
    I.S. EN 61029-2-1:2012 SAFETY OF TRANSPORTABLE MOTOR-OPERATED ELECTRIC TOOLS - PART 2-1: PARTICULAR REQUIREMENTS FOR CIRCULAR SAW BENCHES (IEC 61029-2-1:1993 (MOD) + A1:1999 (EQV) + A2:2001 (EQV))
    UNE-EN 61029-2-1:2013 Safety of transportable motor-operated electric tools - Part 2-1: Particular requirements for circular saw benches
    UNI EN 14070 : 2009 SAFETY OF MACHINE TOOLS - TRANSFER AND SPECIAL-PURPOSE MACHINES
    BS EN 14070 : 2003 SAFETY OF MACHINE TOOLS - TRANSFER AND SPECIAL-PURPOSE MACHINES
    EN 14070:2003+A1:2009/AC:2010 SAFETY OF MACHINE TOOLS - TRANSFER AND SPECIAL-PURPOSE MACHINES

    Standards Referencing This Book - (Show below) - (Hide below)

    EN 294:1992/AC:1993 SAFETY OF MACHINERY - SAFETY DISTANCES TO PREVENT DANGER ZONES BEING REACHED BY THE UPPER LIMBS
    ISO 11202:2010 Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections
    EN 1127-1:2011 Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodology
    EN ISO 11204:2010 Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections (ISO 11204:2010)
    EN 894-3:2000+A1:2008 SAFETY OF MACHINERY - ERGONOMICS REQUIREMENTS FOR THE DESIGN OF DISPLAYS AND CONTROL ACTUATORS - PART 3: CONTROL ACTUATORS
    IEC 61000-6-4:2006+AMD1:2010 CSV ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-4: GENERIC STANDARDS - EMISSION STANDARD FOR INDUSTRIAL ENVIRONMENTS
    EN 418 : 1992 SAFETY OF MACHINERY - EMERGENCY STOP EQUIPMENT, FUNCTIONAL ASPECTS - PRINCIPLES FOR DESIGN
    EN 982 : 96 + A1 2008 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR FLUID POWER SYSTEMS AND THEIR COMPONENTS - HYDRAULICS
    ISO 4871:1996 Acoustics Declaration and verification of noise emission values of machinery and equipment
    EN 1037:1995+A1:2008 SAFETY OF MACHINERY - PREVENTION OF UNEXPECTED START-UP
    ISO 14122-3:2016 Safety of machinery Permanent means of access to machinery Part 3: Stairs, stepladders and guard-rails
    ISO 3744:2010 Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for an essentially free field over a reflecting plane
    ISO 11546-2:1995 Acoustics Determination of sound insulation performances of enclosures Part 2: Measurements in situ (for acceptance and verification purposes)
    EN 1088:1995+A2:2008 SAFETY OF MACHINERY - INTERLOCKING DEVICES ASSOCIATED WITH GUARDS - PRINCIPLES FOR DESIGN AND SELECTION
    EN 981:1996+A1:2008 Safety of machinery - System of auditory and visual danger and information signals
    ISO/TR 11688-1:1995 Acoustics Recommended practice for the design of low-noise machinery and equipment Part 1: Planning
    EN 894-2:1997+A1:2008 SAFETY OF MACHINERY - ERGONOMICS REQUIREMENTS FOR THE DESIGN OF DISPLAYS AND CONTROL ACTUATORS - PART 2: DISPLAYS
    ISO 7250:1996 Basic human body measurements for technological design
    ISO 9614-1:1993 Acoustics Determination of sound power levels of noise sources using sound intensity Part 1: Measurement at discrete points
    EN 614-2:2000+A1:2008 SAFETY OF MACHINERY - ERGONOMIC DESIGN PRINCIPLES - PART 2: INTERACTIONS BETWEEN THE DESIGN OF MACHINERY AND WORK TASKS
    EN 1837:1999+A1:2009 SAFETY OF MACHINERY - INTEGRAL LIGHTING OF MACHINES
    EN 999:1998+A1:2008 SAFETY OF MACHINERY - THE POSITIONING OF PROTECTIVE EQUIPMENT IN RESPECT OF APPROACH SPEEDS OF PARTS OF THE HUMAN BODY
    EN 811 : 1996 SAFETY OF MACHINERY - SAFETY DISTANCES TO PREVENT DANGER ZONES BEING REACHED BY THE LOWER LIMBS
    EN 349:1993+A1:2008 SAFETY OF MACHINERY - MINIMUM GAPS TO AVOID CRUSHING OF PARTS OF THE HUMAN BODY
    EN 13478:2001+A1:2008 SAFETY OF MACHINERY - FIRE PREVENTION AND PROTECTION
    EN 1299:1997+A1:2008 MECHANICAL VIBRATION AND SHOCK - VIBRATION ISOLATION OF MACHINES - INFORMATION FOR THE APPLICATION OF SOURCE ISOLATION
    IEC 60204-1:2016 Safety of machinery - Electrical equipment of machines - Part 1: General requirements
    ISO 14738:2002 Safety of machinery Anthropometric requirements for the design of workstations at machinery
    EN 1005-1:2001+A1:2008 Safety of machinery - Human physical performance - Part 1: Terms and definitions
    EN 1033 : 1995 HAND-ARM VIBRATION - LABORATORY MEASUREMENT OF VIBRATION AT THE GRIP SURFACE OF HAND-GUIDED MACHINERY - GENERAL
    EN 1005-2:2003+A1:2008 SAFETY OF MACHINERY - HUMAN PHYSICAL PERFORMANCE - PART 2: MANUAL HANDLING OF MACHINERY AND COMPONENT PARTS OF MACHINERY
    EN 414 : 2000 SAFETY OF MACHINERY - RULES FOR THE DRAFTING AND PRESENTATION OF SAFETY STANDARDS
    EN 1760-1:1997+A1:2009 SAFETY OF MACHINERY - PRESSURE SENSITIVE PROTECTIVE DEVICES - PART 1: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE SENSITIVE MATS AND PRESSURE SENSITIVE FLOORS
    EN 1050 : 1996 SAFETY OF MACHINERY - PRINCIPLES FOR RISK ASSESSMENT
    EN ISO 11820 : 1996 ACOUSTICS - MEASUREMENTS ON SILENCERS IN SITU
    EN 614-1:2006+A1:2009 SAFETY OF MACHINERY - ERGONOMIC DESIGN PRINCIPLES - PART 1: TERMINOLOGY AND GENERAL PRINCIPLES
    EN ISO 11688-2 : 2000 ACOUSTICS - RECOMMENDED PRACTICE FOR THE DESIGN OF LOW-NOISE MACHINERY AND EQUIPMENT - PART 2: INTRODUCTION TO THE PHYSICS OF LOW-NOISE DESIGN
    EN 292-1 : 1991 SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - BASIC TERMINOLOGY, METHODOLOGY
    ISO 11820:1996 Acoustics — Measurements on silencers in situ
    EN ISO 11546-2 : 2009 ACOUSTICS - DETERMINATION OF SOUND INSULATION PERFORMANCES OF ENCLOSURES - PART 2: MEASUREMENTS IN SITU (FOR ACCEPTANCE AND VERIFICATION PURPOSES)
    ISO 3746:2010 Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Survey method using an enveloping measurement surface over a reflecting plane
    EN ISO 14122-3:2016 Safety of machinery - Permanent means of access to machinery - Part 3: Stairs, stepladders and guard-rails (ISO 14122-3:2016)
    EN ISO 3746:2010 ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - SURVEY METHOD USING AN ENVELOPING MEASUREMENT SURFACE OVER A REFLECTING PLANE (ISO 3746:2010)
    EN 61496-1:2013/AC:2015 SAFETY OF MACHINERY - ELECTRO-SENSITIVE PROTECTIVE EQUIPMENT - PART 1: GENERAL REQUIREMENTS AND TESTS (IEC 61496-1:2012)
    EN 61000-6-2:2005/corrigendum:2005 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-2: GENERIC STANDARDS - IMMUNITY FOR INDUSTRIAL ENVIRONMENTS (IEC 61000-6-2:2005)
    EN ISO 3744:2010 Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for an essentially free field over a reflecting plane (ISO 3744:2010)
    EN 953:1997+A1:2009 SAFETY OF MACHINERY - GUARDS - GENERAL REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF FIXED AND MOVABLE GUARDS
    EN 842:1996+A1:2008 Safety of machinery - Visual danger signals - General requirements, design and testing
    EN 61000-6-4:2007/A1:2011 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-4: GENERIC STANDARDS - EMISSION STANDARD FOR INDUSTRIAL ENVIRONMENTS
    EN ISO 14122-2:2016 Safety of machinery - Permanent means of access to machinery - Part 2: Working platforms and walkways (ISO 14122-2:2016)
    IEC 61496-1:2012 Safety of machinery - Electro-sensitive protective equipment - Part 1: General requirements and tests
    EN 983:1996+A1:2008 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR FLUID POWER SYSTEMS AND THEIR COMPONENTS - PNEUMATICS
    EN 954-1 : 1996 SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 1: GENERAL PRINCIPLES FOR DESIGN
    EN 292-2 : 91 AMD 1 95 SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - TECHNICAL PRINCIPLES AND SPECIFICATION
    EN ISO 4871 : 2009 ACOUSTICS - DECLARATION AND VERIFICATION OF NOISE EMISSION VALUES OF MACHINERY AND EQUIPMENT (ISO 4871:1996)
    ISO 11546-1:1995 Acoustics Determination of sound insulation performances of enclosures Part 1: Measurements under laboratory conditions (for declaration purposes)
    EN ISO 7250 : 1997 BASIC HUMAN BODY MEASUREMENTS FOR TECHNOLOGICAL DESIGN
    EN 626-1:1994+A1:2008 SAFETY OF MACHINERY - REDUCTION OF RISKS TO HEALTH FROM HAZARDOUS SUBSTANCES EMITTED BY MACHINERY - PART 1: PRINCIPLES AND SPECIFICATIONS FOR MACHINERY MANUFACTURERS
    EN 1005-3:2002+A1:2008 Safety of machinery - Human physical performance - Part 3: Recommended force limits for machinery operation
    EN ISO 11691 : 2009 ACOUSTICS - MEASUREMENT OF INSERTION LOSS OF DUCTED SILENCERS WITHOUT FLOW - LABORATORY SURVEY METHOD
    EN ISO 11821 : 1997 ACOUSTICS - MEASUREMENT OF THE IN SITU SOUND ATTENUATION OF A REMOVABLE SCREEN
    EN ISO 11546-1 : 2009 ACOUSTICS - DETERMINATION OF SOUND INSULATION PERFORMANCES OF ENCLOSURES - PART 1: MEASUREMENTS UNDER LABORATORY CONDITIONS (FOR DECLARATION PURPOSES)
    ISO 14122-2:2016 Safety of machinery Permanent means of access to machinery Part 2: Working platforms and walkways
    EN ISO 11688-1 : 2009 ACOUSTICS - RECOMMENDED PRACTICE FOR THE DESIGN OF LOW-NOISE MACHINERY AND EQUIPMENT - PART 1: PLANNING (ISO/TR 11688-1:1995)
    ISO/TR 11688-2:1998 Acoustics Recommended practice for the design of low-noise machinery and equipment Part 2: Introduction to the physics of low-noise design
    IEC 61000-6-2 : 3.0:2016 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-2: GENERIC STANDARDS - IMMUNITY STANDARD FOR INDUSTRIAL ENVIRONMENTS
    EN ISO 9614-1 : 2009 ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES USING SOUND INTENSITY - PART 1: MEASUREMENT AT DISCRETE POINTS
    EN ISO 11202:2010 Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections (ISO 11202:2010)
    EN 1070 : 1998 SAFETY OF MACHINERY - TERMINOLOGY
    ISO 11204:2010 Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections
    ISO 11691:1995 Acoustics Measurement of insertion loss of ducted silencers without flow Laboratory survey method
    EN ISO 14738:2008 SAFETY OF MACHINERY - ANTHROPOMETRIC REQUIREMENTS FOR THE DESIGN OF WORKSTATIONS AT MACHINERY
    ISO 683-1:2016 Heat-treatable steels, alloy steels and free-cutting steels Part 1: Non-alloy steels for quenching and tempering
    IEC 61496-2:2013 Safety of machinery - Electro-sensitive protective equipment - Part 2: Particular requirements for equipment using active opto-electronic protective devices (AOPDs)
    ISO 11821:1997 Acoustics Measurement of the in situ sound attenuation of a removable screen
    EN 60204-1 : 2006 COR 2010 SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS
    EN 894-1:1997+A1:2008 SAFETY OF MACHINERY - ERGONOMICS REQUIREMENTS FOR THE DESIGN OF DISPLAYS AND CONTROL ACTUATORS - PART 1: GENERAL PRINCIPLES FOR HUMAN INTERACTIONS WITH DISPLAYS AND CONTROL ACTUATORS
    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective