EN 14208:2004
Current
Current
The latest, up-to-date edition.
Transportable gas cylinders - Specification for welded pressure drums up to 1000 litre capacity for the transport of gases - Design and construction
Published date
11-02-2004
Publisher
Sorry this product is not available in your region.
Introduction
1 Scope
2 Normative references
3 Terms, definitions and symbols
4 Materials
5 Design
6 Lifting attachments
7 Manufacturing process - Welding procedures
8 Fabrication
9 Welded joints
10 Surface finish of material
11 Assembly
12 Repair of weld defects
13 Construction and workmanship
14 Testing and examination
15 New design tests
16 Information to be marked
17 Records
Annex A (normative) Description, evaluation of manufacturing
defects and conditions for rejection of welded steel
pressure drums at time of visual inspection
Annex B (informative) Examples of design test and batch test
certificates
Annex C (informative) Guidance on the application of conformity
assessment modules when using this standard
Bibliography
This European Standard specifies the minimum requirements for the material, design, construction and workmanship, inspection and testing at manufacture of refillable welded steel pressure drums, hereafter referred to as drums, of volumes of 150 litres up to 1 000 litres for compressed and liquefied gases. Cylindrical and spherical containers are covered.
| Committee |
CEN/TC 23
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Standards | Relationship |
| UNI EN 14208 : 2005 | Identical |
| NEN EN 14208 : 2004 | Identical |
| NBN EN 14208 : 2004 | Identical |
| SN EN 14208 : 2004 | Identical |
| I.S. EN 14208:2004 | Identical |
| UNE-EN 14208:2004 | Identical |
| NS EN 14208 : 1ED 2004 | Identical |
| BS EN 14208:2004 | Identical |
| PN EN 14208 : 2004 | Identical |
| NF EN 14208 : 2004 | Identical |
| DIN EN 14208:2004-05 | Identical |
| I.S. EN 14876:2007 | TRANSPORTABLE GAS CYLINDERS - PERIODIC INSPECTION AND TESTING OF WELDED STEEL PRESSURE DRUMS |
| 04/30107772 DC : DRAFT JAN 2004 | PREN 14876 - TRANSPORTABLE GAS CYLINDERS - PERIODIC INSPECTION AND TESTING OF WELDED STEEL PRESSURE DRUMS |
| BS EN 14876:2007 | Transportable gas cylinders. Periodic inspection and testing of welded steel pressure drums |
| EN 14876:2007 | Transportable gas cylinders - Periodic inspection and testing of welded steel pressure drums |
| DIN EN 14876:2007-04 | Transportable gas cylinders - Periodic inspection and testing of welded steel pressure drums |
| EN 10002-1 : 2001 | METALLIC MATERIALS - TENSILE TESTING - PART 1: METHOD OF TEST AT AMBIENT TEMPERATURE |
| EN 444:1994 | Non-destructive testing - General principles for radiographic examination of metallic materials by X- and gamma-rays |
| EN ISO 5817:2014 | Welding - Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) - Quality levels for imperfections (ISO 5817:2014) |
| EN 10120:2017 | Steel sheet and strip for welded gas cylinders |
| EN 629-2 : 1996 | TRANSPORTABLE GAS CYLINDERS - 25E TAPER THREAD FOR CONNECTION OF VALVES TO GAS CYLINDERS - GAUGE INSPECTION |
| EN 10045-2 : 1992 COR 1993 | METALLIC MATERIALS - CHARPY IMPACT TEST - VERIFICATION OF THE TESTING MACHINE (PENDULUM IMPACT) |
| ISO 8501-1:2007 | Preparation of steel substrates before application of paints and related products — Visual assessment of surface cleanliness — Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings |
| ISO 11114-1:2012 | Gas cylinders Compatibility of cylinder and valve materials with gas contents Part 1: Metallic materials |
| ISO 13920:1996 | Welding — General tolerances for welded constructions — Dimensions for lengths and angles — Shape and position |
| EN 10028-1:2017 | Flat products made of steels for pressure purposes - Part 1: General requirements |
| EN 10002-2 : 1991 | METALLIC MATERIALS - TENSILE TESTING - PART 2: VERIFICATION OF THE FORCE MEASURING SYSTEM OF THE TENSILE TESTING MACHINE |
| EN 10028-3:2017 | Flat products made of steels for pressure purposes - Part 3: Weldable fine grain steels, normalized |
| EN 288-3:1992/A1:1997 | SPECIFICATION AND APPROVAL OF WELDING PROCEDURES FOR METALLIC MATERIALS - PART 3: WELDING PROCEDURE TESTS FOR THE ARC WELDING OF STEELS |
| ISO 11116-2:1999 | Gas cylinders 17E taper thread for connection of valves to gas cylinders Part 2: Inspection gauges |
| EN 10088-3:2014 | Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes |
| EN 12517:1998/A2:2003 | NON-DESTRUCTIVE TESTING OF WELDS - RADIOGRAPHIC TESTING OF WELDED JOINTS - ACCEPTANCE LEVELS |
| ISO 3879:1977 | Welded joints — Recommended practice for liquid penetrant testing |
| EN ISO 11116-1 : 1999 | GAS CYLINDERS - 17E TAPER THREAD FOR CONNECTION OF VALVES TO GAS CYLINDERS - PART 1: SPECIFICATIONS |
| EN 895:1995 | Destructive tests on welds in metallic materials - Transverse tensile test |
| EN 462-3:1996 | Non-destructive testing - Image quality of radiographs - Part 3: Image quality classes for ferrous metals |
| EN 10088-2:2014 | Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes |
| EN 10028-2:2017 | Flat products made of steels for pressure purposes - Part 2: Non-alloy and alloy steels with specified elevated temperature properties |
| EN 910 : 1996 | DESTRUCTIVE TESTS ON WELDS IN METALLIC MATERIALS - BEND TESTS |
| EN 10028-7:2016 | Flat products made of steels for pressure purposes - Part 7: Stainless steels |
| EN 10045-1 : 1990 | METALLIC MATERIALS - CHARPY IMPACT TEST - PART 1: TEST METHOD |
| ISO 5817:2014 | Welding — Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) — Quality levels for imperfections |
| EN 10028-5:2017 | Flat products made of steels for pressure purposes - Part 5: Weldable fine grain steels, thermomechanically rolled |
| EN ISO 13920:1996 | Welding - General tolerances for welded constructions - Dimensions for lengths and angles - Shape and position (ISO 13920:1996) |
| EN ISO 11116-2 : 1999 | GAS CYLINDERS - 17E TAPER THREAD FOR CONNECTION OF VALVES TO GAS CYLINDERS - PART 2: INSPECTION GAUGES |
| EN 875:1995 | Destructive tests on welds in metallic materials - Impact tests - Test specimen location, notch orientation and examination |
| ISO 11114-2:2013 | Gas cylinders Compatibility of cylinder and valve materials with gas contents Part 2: Non-metallic materials |
| EN ISO 11114-2:2013 | Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 2: Non-metallic materials (ISO 11114-2:2013) |
| EN 1712:1997/A2:2004 | NON-DESTRUCTIVE TESTING OF WELDS - ULTRASONIC TESTING OF WELDED JOINTS - ACCEPTANCE LEVELS |
| EN 1713:1998/A2:2003 | NON-DESTRUCTIVE TESTING OF WELDS - ULTRASONIC TESTING - CHARACTERIZATION OF INDICATIONS IN WELDS |
| EN 10002-4 : 1994 | METALLIC MATERIALS - TENSILE TEST - VERIFICATION OF EXTENSOMETERS USED IN UNIAXIAL TESTING |
| ISO 11116-1:1999 | Gas cylinders 17E taper thread for connection of valves to gas cylinders Part 1: Specifications |
| EN ISO 8501-1:2007 | Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings (ISO 8501-1:2007) |
| ISO 15607:2003 | Specification and qualification of welding procedures for metallic materials General rules |
| EN 10028-4:2017 | Flat products made of steels for pressure purposes - Part 4: Nickel alloy steels with specified low temperature properties |
| EN 970:1997 | Non-destructive examination of fusion welds - Visual examination |
| EN 1290:1998/A2:2003 | NON-DESTRUCTIVE EXAMINATION OF WELDS - MAGNETIC PARTICLE EXAMINATION OF WELDS |
| EN ISO 15607:2003 | Specification and qualification of welding procedures for metallic materials - General rules (ISO 15607:2003) |
| EN 22063 : 1993 | METALLIC AND OTHER INORGANIC COATINGS - THERMAL SPRAYING - ZINC, ALUMINIUM AND THEIR ALLOYS |
| EN 10088-1:2014 | Stainless steels - Part 1: List of stainless steels |
| EN 629-1 : 1996 | TRANSPORTABLE GAS CYLINDERS - 25E TAPER THREAD FOR CONNECTION OF VALVES TO GAS CYLINDERS - PART 1: SPECIFICATION |
| EN 287-1:2011 | Qualification test of welders - Fusion welding - Part 1: Steels |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.