EN 14420-6:2013
Current
The latest, up-to-date edition.
Hose fittings with clamp units - Part 6: TW tank truck couplings
10-07-2013
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Fitting combinations
5 Dimensions, designations
6 Materials
7 Design
8 Fitting of hose couplings
9 Marking
10 Type testing and quality control
Annex A (normative) - Gauges for TW tank
truck couplings
Bibliography
This European Standard specifies the fitting combinations, design, materials and dimensions for hose fittings with couplings for tank trucks (TW couplings).Couplings for tank trucks in accordance with this document are intended to link hoses with connections for the transport of liquids, solid matters and gases with the exception of liquid gas and steam. They can be employed in a working pressure range of -0,8 bar up to 16 bar at working temperatures of -20 °C up to +65 °C. Couplings for tank trucks for other operating conditions are subject to agreement.WARNING - Male and female dust couplings are pressure resistant plugs. They do not fulfil the function of a locking device, which should be installed in any case as long as the hose assembly is under pressure.
| Committee |
CEN/TC 218
|
| DevelopmentNote |
Supersedes PREN 14420-6. (07/2013)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| UNE-EN 14420-6:2005 | Identical |
| DIN EN 14420-6:2013-09 | Identical |
| NF EN 14420-6 : 2013 | Identical |
| SN EN 14420-6 : 2013 | Identical |
| PN EN 14420-6 : 2013 | Identical |
| NBN EN 14420-6 : 2013 | Identical |
| I.S. EN 14420-6:2013 | Identical |
| NS EN 14420-6 : 2013 | Identical |
| BS EN 14420-6:2013 | Identical |
| UNI EN 14420-6 : 2013 | Identical |
| NEN EN 14420-6 : 2013 | Identical |
| UNE-EN 14420-6:2014 | Identical |
| 16/30346577 DC : 0 | BS EN 1305 - INLAND NAVIGATION VESSELS - CONNECTIONS FOR THE DISCHARGE OF OILY MIXTURE |
| PREN 1305 : DRAFT 2016 | INLAND NAVIGATION VESSELS - CONNECTIONS FOR THE DISCHARGE OF OILY MIXTURE |
| 10/30234619 DC : 0 | BS EN 14420-2 - HOSE FITTINGS WITH CLAMP UNITS - PART 2: HOSE SIDE PARTS OF HOSE TAIL |
| BS EN 1306:1996 | Inland navigation vessels. Connections for the discharge of waste water |
| BS EN 14714:2005 | Inland navigation vessels. Connection nozzle for equipment and devices at cargo tanks. Dimensions |
| 10/30234625 DC : 0 | BS EN 14420-1 - HOSE FITTINGS WITH CLAMP UNITS - PART 1: REQUIREMENTS, SURVEY, DESIGNATION AND TESTING |
| PREN 1306 : DRAFT 2016 | INLAND NAVIGATION VESSELS - CONNECTIONS FOR THE DISCHARGE OF WASTE WATER |
| EN 1305:2018 | Inland navigation vessels - Connections for the discharge of oily mixture |
| DIN EN 14420-1:2013-09 | Hose fittings with clamp units - Part 1: Requirements, types of fixing and connection, designation and testing |
| EN 12115:2011 | Rubber and thermoplastics hoses and hose assemblies for liquid or gaseous chemicals - Specification |
| I.S. EN 14420-2:2013 | HOSE FITTINGS WITH CLAMP UNITS - PART 2: HOSE SIDE PARTS OF HOSE TAIL |
| I.S. EN 12115:2011 | RUBBER AND THERMOPLASTICS HOSES AND HOSE ASSEMBLIES FOR LIQUID OR GASEOUS CHEMICALS - SPECIFICATION |
| DIN EN 14420-2:2013-09 | Hose fittings with clamp units - Part 2: Hose side parts of hose tail |
| I.S. EN 14420-1:2013 | HOSE FITTINGS WITH CLAMP UNITS - PART 1: REQUIREMENTS, TYPES OF FIXING AND CONNECTION, DESIGNATION AND TESTING |
| DIN EN 12115:2011-04 | Rubber and thermoplastics hoses and hose assemblies for liquid or gaseous chemicals - Specification; German version EN 12115:2011 |
| UNI EN 14420-2 : 2013 | HOSE FITTINGS WITH CLAMP UNITS - PART 2: HOSE SIDE PARTS OF HOSE TAIL |
| UNI EN 14420-1 : 2013 | HOSE FITTINGS WITH CLAMP UNITS - PART 1: REQUIREMENTS, TYPES OF FIXING AND CONNECTION, DESIGNATION AND TESTING |
| PREN 14420-2 : DRAFT 2010 | HOSE FITTINGS WITH CLAMP UNITS - PART 2: HOSE SIDE PARTS OF HOSE TAIL |
| 16/30346574 DC : 0 | BS EN 1306 - INLAND NAVIGATION VESSELS - CONNECTIONS FOR THE DISCHARGE OF WASTE WATER |
| I.S. EN 1305:1996 | INLAND NAVIGATION VESSELS - CONNECTIONS FOR THE DISCHARGE OF OILY MIXTURE |
| I.S. EN 1306:1996 | INLAND NAVIGATION VESSELS - CONNECTIONS FOR THE DISCHARGE OF WASTE WATER |
| BS EN 12115:2011 | Rubber and thermoplastics hoses and hose assemblies for liquid or gaseous chemicals. Specification |
| BS EN 14420-2:2013 | Hose fittings with clamp units Hose side parts of hose tail |
| BS EN 14420-1:2013 | Hose fittings with clamp units Requirements, types of fixing and connection, designation and testing |
| EN 14714:2005 | Inland navigation vessels - Connection nozzle for equipment and devices at cargo tanks - Dimensions |
| EN 14420-2:2013 | Hose fittings with clamp units - Part 2: Hose side parts of hose tail |
| EN 14420-1:2013 | Hose fittings with clamp units - Part 1: Requirements, types of fixing and connection, designation and testing |
| PREN 14420-1 : DRAFT 2010 | HOSE FITTINGS WITH CLAMP UNITS - PART 1: REQUIREMENTS, SURVEY, DESIGNATION AND TESTING |
| EN 1306:2018 | Inland navigation vessels - Connections for the discharge of waste water |
| UNI EN 12115 : 2011 | RUBBER AND THERMOPLASTICS HOSES AND HOSE ASSEMBLIES FOR LIQUID OR GASEOUS CHEMICALS - SPECIFICATION |
| DIN EN 14714:2005-06 | Inland navigation vessels - Connection nozzle for equipment and devices at cargo tanks - Dimensions |
| EN ISO 8330:2014 | Rubber and plastics hoses and hose assemblies - Vocabulary (ISO 8330:2014) |
| EN 22768-2:1993 | General tolerances - Part 2: Geometrical tolerances for features without individual tolerance indications (ISO 2768-2:1989) |
| ISO 4042:1999 | Fasteners Electroplated coatings |
| EN ISO 4042:1999 | Fasteners - Electroplated coatings (ISO 4042:1999) |
| EN 10213:2007+A1:2016 | Steel castings for pressure purposes |
| EN 14420-1:2013 | Hose fittings with clamp units - Part 1: Requirements, types of fixing and connection, designation and testing |
| EN 586-2:1994 | Aluminium and aluminium alloys - Forgings - Part 2: Mechanical properties and additional property requirements |
| ISO 6708:1995 | Pipework components Definition and selection of DN (nominal size) |
| EN 14420-5:2013 | Hose fittings with clamp units - Part 5: Threaded connections |
| EN 14420-2:2013 | Hose fittings with clamp units - Part 2: Hose side parts of hose tail |
| ISO 8330:2007 | Rubber and plastics hoses and hose assemblies Vocabulary |
| EN ISO 6708:1995 | Pipework components - Definition and selection of DN (nominal size) (ISO 6708:1995) |
| EN ISO 228-1:2003 | Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation (ISO 228-1:2000) |
| ISO 2768-2:1989 | GENERAL TOLERANCES - PART 2: GEOMETRICAL TOLERANCES FOR FEATURES WITHOUT INDIVIDUAL TOLERANCE INDICATIONS |
| EN 22768-1:1993 | General tolerances - Part 1: Tolerances for linear and angular dimensions without individual tolerance indications (ISO 2768-1:1989) |
| EN 14420-3:2013 | Hose fittings with clamp units - Part 3: Clamp units, bolted or pinned |
| EN 10083-2:2006 | Steels for quenching and tempering - Part 2: Technical delivery conditions for non alloy steels |
| EN 12420:2014 | Copper and copper alloys - Forgings |
| ISO 228-1:2000 | Pipe threads where pressure-tight joints are not made on the threads Part 1: Dimensions, tolerances and designation |
| EN 10088-1:2014 | Stainless steels - Part 1: List of stainless steels |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.