EN 14973:2015
Current
Current
The latest, up-to-date edition.
Conveyor belts for use in underground installations - Electrical and flammability safety requirements
Published date
18-11-2015
Publisher
European foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Ignition hazard assessment
5 Electrical resistance
6 Frictional heating
7 Resistance to ignition
8 Fire propagation
9 Marking
Annex A (informative) - Hazards and risk assessment
Annex B (informative) - Example of an ignition hazard
assessment for a conveyor belt intended for use
in a potentially explosive atmosphere
Annex C (informative) - Suggested conveyor belt
approval/compliance options
Annex ZA (informative) - Relationship between this
European Standard and the Essential
Requirements of EU Directive 94/9/EC
Annex ZB (informative) - Relationship between this
European Standard and the Essential
Requirements of EC Directive 2006/42/EC
Bibliography
from CEN/TC 188 N362: The revision of EN 14973 should be started to bring it in line with the revised EN 12881-1 and EN 12881-2. (see Resolution 2/2011). The experts present agree that an Annex should be added to EN 14973 to specify that Family approval for belts is possible. Resolution 2/2011: The experts present agree that general revision of EN 14973 and EN 12882 is needed due to the work being done on EN 12881-1 and EN 12881-2.
| Committee |
CEN/TC 188
|
| DevelopmentNote |
Supersedes PREN 14973. (11/2015)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| NBN EN 14973 : 2015 | Identical |
| NF EN 14973 : 2016 | Identical |
| SN EN 14973:2016 | Identical |
| DIN EN 14973:2018-05 | Identical |
| BS EN 14973:2015 | Identical |
| UNI EN 14973 : 2015 | Identical |
| SS-EN 14973 : 2015 | Identical |
| UNE-EN 14973:2016 | Identical |
| NEN EN 14973 : 2015 | Identical |
| NS EN 14973 : 2015 | Identical |
| I.S. EN 14973:2015 | Identical |
| PN EN 14973 : 2016 | Identical |
| DIN EN 14973:2016-02 | Identical |
| UNI EN 14973 : 2008 | Identical |
| 07/30163048 DC : 0 | BS EN 12882 - CONVEYOR BELTS FOR GENERAL PURPOSE USE - ELECTRICAL AND FLAMMABILITY SAFETY REQUIREMENTS |
| 11/30250552 DC : 0 | BS EN 1554 - CONVEYOR BELTS - DRUM FRICTION TESTING |
| 13/30289286 DC : 0 | BS EN 12882 - CONVEYOR BELTS FOR GENERAL PURPOSE USE - ELECTRICAL AND FLAMMABILITY SAFETY REQUIREMENTS |
| PREN 1554 : DRAFT 2011 | CONVEYOR BELTS - DRUM FRICTION TESTING |
| PD CLC/TR 60079-32-1:2015 | Explosive atmospheres Electrostatic hazards, guidance |
| ISO/IEC 80079-38:2016 | Explosive atmospheres Part 38: Equipment and components in explosive atmospheres in underground mines |
| DIN EN ISO/IEC 80079-38:2012-08 (Draft) | EXPLOSIVE ATMOSPHERES - PART 38: EQUIPMENT AND COMPONENTS IN EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES (ISO/IEC 80079-38:2016) |
| DIN EN ISO 15236-3:2016-10 (Draft) | STEEL CORD CONVEYOR BELTS - PART 3: SPECIAL SAFETY REQUIREMENTS FOR BELTS FOR USE IN UNDERGROUND INSTALLATIONS (ISO 15236-3:2017) |
| BS EN ISO 15236-3:2017 | Steel cord conveyor belts Special safety requirements for belts for use in underground installations |
| EN 16191:2014 | Tunnelling machinery - Safety requirements |
| EN 12881-1:2014 | Conveyor belts - Fire simulation flammability testing - Part 1: Propane burner tests |
| EN 12882:2015 | Conveyor belts for general purpose use - Electrical and flammability safety requirements |
| I.S. EN 13463-5:2011 | NON-ELECTRICAL EQUIPMENT INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES - PART 5: PROTECTION BY CONSTRUCTIONAL SAFETY 'C' |
| UNI EN 16191 : 2014 | TUNNELLING MACHINERY - SAFETY REQUIREMENTS |
| DIN EN ISO 22721:2010-01 | Conveyor belts - Specification for rubber- or plastics-covered conveyor belts of textile construction for underground mining (ISO 22721:2007) |
| BS EN 16191:2014 | Tunnelling machinery. Safety requirements |
| BS EN ISO 22721:2007 | Conveyor belts. Specification for rubber- or plastics-covered conveyor belts of textile construction for underground mining |
| BS EN ISO/IEC 80079-38 : 2016 | EXPLOSIVE ATMOSPHERES - PART 38: EQUIPMENT AND COMPONENTS IN EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES (ISO/IEC 80079 38:2016) |
| DIN EN 12882:2015-11 | CONVEYOR BELTS FOR GENERAL PURPOSE USE - ELECTRICAL AND FLAMMABILITY SAFETY REQUIREMENTS |
| DIN EN 1554:2012-10 | CONVEYOR BELTS - DRUM FRICTION TESTING |
| BS EN 1554:2012 | Conveyor belts. Drum friction testing |
| UNE-EN 12881-1:2014 | Conveyor belts - Fire simulation flammability testing - Part 1: Propane burner tests |
| BS EN 12881-1:2014 | Conveyor belts. Fire simulation flammability testing Propane burner tests |
| I.S. EN ISO 15236-3:2017 | STEEL CORD CONVEYOR BELTS - PART 3: SPECIAL SAFETY REQUIREMENTS FOR BELTS FOR USE IN UNDERGROUND INSTALLATIONS (ISO 15236-3:2017) |
| DIN EN 13463-5:2011-10 | NON-ELECTRICAL EQUIPMENT INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES - PART 5: PROTECTION BY CONSTRUCTIONAL SAFETY 'C' |
| DIN EN 13463-5:2004-03 | NON-ELECTRICAL EQUIPMENT INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES - PART 5: PROTECTION BY CONSTRUCTIONAL SAFETY 'C' |
| I.S. EN 12881-1:2014 | CONVEYOR BELTS - FIRE SIMULATION FLAMMABILITY TESTING - PART 1: PROPANE BURNER TESTS |
| I.S. EN 12882:2015 | CONVEYOR BELTS FOR GENERAL PURPOSE USE - ELECTRICAL AND FLAMMABILITY SAFETY REQUIREMENTS |
| S.R. CLC/TR 60079-32-1:2015 | EXPLOSIVE ATMOSPHERES - PART 32-1: ELECTROSTATIC HAZARDS - GUIDANCE |
| 12/30259188 DC : 0 | BS EN 12881-1 - CONVEYOR BELTS - FIRE SIMULATION FLAMMABILITY TESTING - PART 1: PROPANE BURNER TESTS |
| DIN EN 16191:2014-09 | TUNNELLING MACHINERY - SAFETY REQUIREMENTS |
| I.S. EN ISO 22721:2007 | CONVEYOR BELTS - SPECIFICATION FOR RUBBER- OR PLASTICS-COVERED CONVEYOR BELTS OF TEXTILE CONSTRUCTION FOR UNDERGROUND MINING |
| EN ISO/IEC 80079-38:2016 | Explosive atmospheres - Part 38: Equipment and components in explosive atmospheres in underground mines (ISO/IEC 80079-38:2016) |
| DIN EN 12881-1:2015-10 | Conveyor belts - Fire simulation flammability testing - Part 1: Propane burner tests |
| BS EN 12882:2015 | Conveyor belts for general purpose use. Electrical and flammability safety requirements |
| UNE-EN 13463-5:2013 | Non-electrical equipment intended for use in potentially explosive atmospheres - Part 5: Protection by constructional safety 'c' |
| EN ISO 22721:2007 | Conveyor belts - Specification for rubber- or plastics-covered conveyor belts of textile construction for underground mining (ISO 22721:2007) |
| UNI EN 12881-1 : 2014 | CONVEYOR BELTS - FIRE SIMULATION FLAMMABILITY TESTING - PART 1: PROPANE BURNER TESTS |
| UNI EN 13463-5 : 2011 | NON-ELECTRICAL EQUIPMENT INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES - PART 5: PROTECTION BY CONSTRUCTIONAL SAFETY 'C' |
| UNI EN 1554 : 2012 | CONVEYOR BELTS - DRUM FRICTION TESTING |
| DIN EN 16191 E : 2014 | TUNNELLING MACHINERY - SAFETY REQUIREMENTS |
| 05/30130302 DC : DRAFT MAR 2005 | ISO 22721 - CONVEYOR BELTS - SPECIFICATION FOR RUBBER OR PLASTICS COVERED CONVEYOR BELTS OF TEXTILE CONSTRUCTION FOR UNDERGROUND MINING |
| 12/30243465 DC : 0 | BS ISO/IEC 80079-38 - EXPLOSIVE ATMOSPHERES - PART 38: EQUIPMENT AND COMPONENTS IN EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES |
| BS PD IEC TS 60079-32-1 : 2013 | EXPLOSIVE ATMOSPHERES - PART 32-1: ELECTROSTATIC HAZARDS, GUIDANCE |
| I.S. EN 16191:2014 | TUNNELLING MACHINERY - SAFETY REQUIREMENTS |
| I.S. EN ISO/IEC 80079-38:2016 | EXPLOSIVE ATMOSPHERES - PART 38: EQUIPMENT AND COMPONENTS IN EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES (ISO/IEC/DIS 80079-38:2012) |
| UNE-EN 1554:2012 | Conveyor belts - Drum friction testing |
| BS EN 13463-5:2011 | Non-electrical equipment intended for use in potentially explosive atmospheres Protection by constructional safety \'c\' |
| UNE-EN 12882:2016 | Conveyor belts for general purpose use - Electrical and flammability safety requirements |
| ISO 22721:2007 | Conveyor belts — Specification for rubber- or plastics-covered conveyor belts of textile construction for underground mining |
| ISO 15236-3:2017 | Steel cord conveyor belts — Part 3: Special safety requirements for belts for use in underground installations |
| EN 1554:2012 | Conveyor belts - Drum friction testing |
| EN ISO 15236-3:2017 | Steel cord conveyor belts - Part 3: Special safety requirements for belts for use in underground installations (ISO 15236-3:2017) |
| I.S. EN 1554:2012 | CONVEYOR BELTS - DRUM FRICTION TESTING |
| PREN 12882 : DRAFT 2013 | CONVEYOR BELTS FOR GENERAL PURPOSE USE - ELECTRICAL AND FLAMMABILITY SAFETY REQUIREMENTS |
| CLC/TR 60079-32-1:2015 | Explosive atmospheres - Part 32-1: Electrostatic Hazards - Guidance |
| DIN EN ISO 15236-3:2008-04 | STEEL CORD CONVEYOR BELTS - PART 3: SPECIAL SAFETY REQUIREMENTS FOR BELTS FOR USE IN UNDERGROUND INSTALLATIONS (ISO 15236-3:2017) |
| EN 13463-5:2011 | Non-electrical equipment intended for use in potentially explosive atmospheres - Part 5: Protection by constructional safety 'c' |
| ISO 22721:2007 | Conveyor belts — Specification for rubber- or plastics-covered conveyor belts of textile construction for underground mining |
| ISO 21183-1:2005 | Light conveyor belts Part 1: Principal characteristics and applications |
| EN 13463-1:2009 | Non-electrical equipment for use in potentially explosive atmospheres - Part 1: Basic method and requirements |
| EN ISO 340:2013 | Conveyor belts - Laboratory scale flammability characteristics - Requirements and test method (ISO 340:2013) |
| ISO 15236-3:2017 | Steel cord conveyor belts — Part 3: Special safety requirements for belts for use in underground installations |
| EN 13463-6:2005 | Non-electrical equipment for use in potentially explosive atmospheres - Part 6: Protection by control of ignition source 'b' |
| ISO 12100:2010 | Safety of machinery — General principles for design — Risk assessment and risk reduction |
| ISO 340:2013 | Conveyor belts Laboratory scale flammability characteristics Requirements and test method |
| EN ISO 15236-3:2017 | Steel cord conveyor belts - Part 3: Special safety requirements for belts for use in underground installations (ISO 15236-3:2017) |
| EN ISO 22721:2007 | Conveyor belts - Specification for rubber- or plastics-covered conveyor belts of textile construction for underground mining (ISO 22721:2007) |
| EN ISO 284:2012 | Conveyor belts - Electrical conductivity - Specification and test method (ISO 284:2012) |
| ISO 284:2012 | Conveyor belts — Electrical conductivity — Specification and test method |
| EN 1127-2:2014 | Explosive atmospheres - Explosion prevention and protection - Part 2: Basic concepts and methodology for mining |
| EN 1554:2012 | Conveyor belts - Drum friction testing |
| EN ISO 12100:2010 | Safety of machinery - General principles for design - Risk assessment and risk reduction (ISO 12100:2010) |
| EN ISO 21183-1:2006 | Light conveyor belts - Part 1: Principal characteristics and applications (ISO 21183-1:2005) |
| EN 12881-2:2005+A1:2008 | Conveyor belts - Fire simulation flammability testing - Part 2: Large scale fire test |
| EN 12881-1:2014 | Conveyor belts - Fire simulation flammability testing - Part 1: Propane burner tests |
| EN 13463-5:2011 | Non-electrical equipment intended for use in potentially explosive atmospheres - Part 5: Protection by constructional safety 'c' |
| EN 31010:2010 | Risk management - Risk assessment techniques |
| 1994/9/EC : 1994 | DIRECTIVE 94/9/EC OF THE EUROPEAN PARLIAMENT AND THE COUNCIL OF 23 MARCH 1994 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES CONCERNING EQUIPMENT AND PROTECTIVE SYSTEMS INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES |
Sorry this product is not available in your region.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.