EN 1504-3:2005
Current
Current
The latest, up-to-date edition.
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 3: Structural and non-structural repair
Published date
07-12-2005
Publisher
Sorry this product is not available in your region.
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Performance characteristics for intended uses
5 Requirements
6 Sampling
7 Evaluation of conformity
8 Marking and labelling
Annex A (informative) Frequency of tests for factory
production control
Annex B (informative) Test methods for special applications
Annex C (informative) Release of dangerous substances
Annex ZA (informative) Clauses of this European Standard
addressing the provisions of EU
Construction Products Directive
Bibliography
This European Standard specifies requirements for the identification, performance (including durability) and safety of products and systems to be used for the structural and non-structural repair of concrete structures.This European Standard covers repair mortars and concretes, possibly used in conjunction with other products and systems, to restore and/or to replace defective concrete and to protect reinforcement, necessary to extend the service life of a concrete structure exhibiting deterioration. The fields of application covered are in accordance with ENV 1504-9 as follows:
| Committee |
CEN/TC 104
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Standards | Relationship |
| NF EN 1504-3 : 2006 | Identical |
| NBN EN 1504-3 : 2006 | Identical |
| I.S. EN 1504-3:2006 | Identical |
| NS EN 1504-3 : 1ED 2006 | Identical |
| UNE-EN 1504-3:2006 | Identical |
| SN EN 1504-3 : 2005 | Identical |
| PN EN 1504-3 : 2006 | Identical |
| NEN EN 1504-3 : 2005 | Identical |
| UNI EN 1504-3 : 2006 | Identical |
| BS EN 1504-3:2005 | Identical |
| DIN EN 1504-3:2015-08 (Draft) | Identical |
| DIN EN 1504-3:2006-03 | Identical |
| BS EN 1504-9:2008 | Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and evaluation of conformity General principles for use of products and systems |
| UNI EN 1504-9 : 2009 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 9: GENERAL PRINCIPLES FOR THE USE OF PRODUCTS AND SYSTEMS |
| DIN EN 14879-1:2005-12 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 1: Terminology, design and preparation of substrate |
| BS EN 13412:2006 | Products and systems for the protection and repair of concrete structures. Test methods. Determination of modulus of elasticity in compression |
| EN 13412:2006 | Products and systems for the protection and repair of concrete structures - Test methods - Determination of modulus of elasticity in compression |
| ONORM EN 14487-1 : 2006 | SPRAYED CONCRETE - PART 1: DEFINITIONS, SPECIFICATIONS AND CONFORMITY |
| DD ENV 1504-9:1997 | Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control andevaluation of conformity General principles for the use of products and systems |
| BS EN 1504-10:2017 | Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and evaluation of conformity Site application of products and systems and quality control of the works |
| I.S. EN 1504-10:2017 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 10: SITE APPLICATION OF PRODUCTS AND SYSTEMS AND QUALITY CONTROL OF THE WORKS |
| DIN EN 14487-1:2006-03 | Sprayed concrete - Part 1: Definitions, specifications and conformity |
| DIN EN 13412:2006-11 | Products and systems for the protection and repair of concrete structures - Test methods - Determination of modulus of elasticity in compression |
| BS EN 1504-8:2016 | Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and AVCP Quality control and Assessment and verification of the constancy of performance (AVCP) |
| I.S. EN 13412:2006 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - TEST METHODS - DETERMINATION OF MODULUS OF ELASTICITY IN COMPRESSION |
| I.S. EN 1504-8:2016 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND AVCP - PART 8: QUALITY CONTROL AND ASSESSMENT AND VERIFICATION OF THE CONSTANCY OF PERFORMANCE (AVCP) |
| UNI EN 14487-2 : 2007 | SPRAYED CONCRETE - PART 2: EXECUTION |
| I.S. EN 14487-1:2005 | SPRAYED CONCRETE - PART 1: DEFINITIONS, SPECIFICATIONS AND CONFORMITY |
| 15/30327977 DC : 0 | BS EN 1504-10 - PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 10: SITE APPLICATION OF PRODUCTS AND SYSTEMS AND QUALITY CONTROL OF THE WORKS |
| PREN 1504-10 : DRAFT 2015 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 10: SITE APPLICATION OF PRODUCTS AND SYSTEMS AND QUALITY CONTROL OF THE WORKS |
| DIN EN 14487-2:2007-01 | Sprayed concrete - Part 2: Execution |
| EEMUA 207 : 2009 | DOUBLE CONCRETE TANKS FOR LIQUEFIED GAS - GUIDE TO DESIGN, CONSTRUCTION AND OPERATION |
| EN 14487-1:2005 | Sprayed concrete - Part 1: Definitions, specifications and conformity |
| DIN EN 1504-9:2008-11 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 9: GENERAL PRINCIPALS FOR THE USE OF PRODUCTS AND SYSTEMS |
| I.S. EN 1504-9:2008 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 9: GENERAL PRINCIPLES FOR THE USE OF PRODUCTS AND SYSTEMS |
| EN 1504-10:2017 | Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 10: Site application of products and systems and quality control of the works |
| BS EN 14487-1:2005 | Sprayed concrete Definitions, specifications and conformity |
| BS EN 14487-2:2006 | Sprayed concrete Execution |
| BS EN 14879-1:2005 | 0rganic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media Terminology, design and preparation of substrate |
| EN 1504-8:2016 | Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and AVCP - Part 8: Quality control and Assessment and verification of the constancy of performance (AVCP) |
| EN 1504-9:2008 | Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 9: General principles for the use of products and systems |
| EN 14879-1:2005 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 1: Terminology, design and preparation of substrate |
| EN 14487-2:2006 | Sprayed concrete - Part 2: Execution |
| UNE-EN 1504-9:2011 | Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 9: General principles for the use of products and systems |
| DIN EN 1504-8:2016-08 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND AVCP - PART 8: QUALITY CONTROL AND ASSESSMENT AND VERIFICATION OF THE CONSTANCY OF PERFORMANCE (AVCP) |
| 93/68/EEC : 1993 AMD 2 1998 | COUNCIL DIRECTIVE 93/68/EEC OF 22.7.93 AMENDING DIRECTIVES 87/404/EEC, 88/378/EEC, 89/106/EEC, 89/336/EEC, 89/392/EEC, 89/686/EEC, 90/384/EEC, 90/385/EEC, 90/396/EEC, 91/263/EEC, 92/42/EEC AND 73/23/EEC |
| EN 13396:2004 | Products and systems for the protection and repair of concrete structures - Test methods - Measurement of chloride ion ingress |
| EN 13529:2003 | Products and systems for the protection and repair of concrete structures - Test methods - Resistance to severe chemical attack |
| EN 12190:1998 | Products and systems for the protection and repair of concrete structures - Test methods - Determination of compressive strength of repair mortar |
| EN 13687-2:2002 | Products and systems for the protection and repair of concrete structures - Test methods - Determination of thermal compatibility - Part 2: Thunder-shower cycling (thermal shock) |
| 89/106/EEC : 1988 | COUNCIL DIRECTIVE OF 21 DECEMBER 1988 ON THE APPROXIMATION OF LAWS, REGULATIONS AND ADMINISTRATIVE PROVISIONS OF THE MEMBER STATES RELATING TO CONSTRUCTION PRODUCTS |
| EN 1542:1999 | Products and systems for the protection and repair of concrete structures - Test methods - Measurement of bond strength by pull-off |
| EN 1767:1999 | Products and systems for the protection and repair of concrete structures - Test methods - Infrared analysis |
| EN 13057:2002 | Products and systems for the protection and repair of concrete structures - Test methods - Determination of resistance of capillary absorption |
| EN 13395-2:2002 | Products and systems for the protection and repair of concrete structures - Test methods - Determination of workability - Part 2: Test for flow of grout or mortar |
| EN 13036-4:2011 | Road and airfield surface characteristics - Test methods - Part 4: Method for measurement of slip/skid resistance of a surface: The pendulum test |
| EN 13295:2004 | Products and systems for the protection and repair of concrete structures - Test methods - Determination of resistance to carbonation |
| EN ISO 3251:2008 | Paints, varnishes and plastics - Determination of non-volatile-matter content (ISO 3251:2008) |
| EN ISO 9514:2005 | Paints and varnishes - Determination of the pot life of multicomponent coating systems - Preparation and conditioning of samples and guidelines for testing (ISO 9514:2005) |
| EN 1877-2:2000 | Products and systems for the protection and repair of concrete structures - Test methods - Reactive functions related to epoxy resins - Part 2: Determination of amine functions using the total basicity number |
| EN 13412:2006 | Products and systems for the protection and repair of concrete structures - Test methods - Determination of modulus of elasticity in compression |
| EN ISO 11358:1997 | Plastics - Thermogravimetry (TG) of polymers - General principles (ISO 11358:1997) |
| EN 12192-1:2002 | Products and systems for the protection and repair of concrete structures - Granulometry analysis - Part 1: Test method for dry components of premixed mortar |
| EN 1504-2:2004 | Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 2: Surface protection systems for concrete |
| ISO 11358:1997 | Plastics Thermogravimetry (TG) of polymers General principles |
| ISO 2812-1:2017 | Paints and varnishes — Determination of resistance to liquids — Part 1: Immersion in liquids other than water |
| EN 12617-4:2002 | Products and systems for the protection and repair of concrete structures - Test methods - Part 4: Determination of shrinkage and expansion |
| EN 13395-3:2002 | Products and systems for the protection and repair of concrete structures - Test methods - Determination of workability - Part 3: Test for flow of repair concrete |
| ISO 3251:2008 | Paints, varnishes and plastics Determination of non-volatile-matter content |
| EN 1877-1:2000 | Products and systems for the protection and repair of concrete structures - Test methods - Reactive functions related to epoxy resins - Part 1: Determination of epoxy equivalent |
| EN 1504-1:2005 | Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 1: Definitions |
| EN 1504-8:2016 | Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and AVCP - Part 8: Quality control and Assessment and verification of the constancy of performance (AVCP) |
| EN 13687-1:2002 | Products and systems for the protection and repair of concrete structures - Test methods - Determination of thermal compatibility - Part 1: Freeze-thaw cycling with de-icing salt immersion |
| EN 13584:2003 | Products and systems for the protection and repair of concrete structures - Test methods - Determination of creep in compression for repair products |
| EN 1766:2017 | Products and systems for the protection and repair of concrete structures - Test methods - Reference concretes for testing |
| ISO 9514:2005 | Paints and varnishes Determination of the pot life of multicomponent coating systems Preparation and conditioning of samples and guidelines for testing |
| EN 13395-4:2002 | Products and systems for the protection and repair of concrete structures - Test methods - Determination of workability - Part 4: Application of repair mortar overhead |
| EN 1770:1998 | Products and systems for the protection and repair of concrete structures - Test methods - Determination of the coefficient of thermal expansion |
| EN 13687-4:2002 | Products and systems for the protection and repair of concrete structures - Test methods - Determination of thermal compatibility - Part 4: Dry thermal cycling |
| EN 14487-1:2005 | Sprayed concrete - Part 1: Definitions, specifications and conformity |
| EN 13395-1:2002 | Products and systems for the protection and repair of concrete structures - Test methods - Determination of workability - Part 1: Test for flow of thixotropic mortars |
| ENV 1504-9 : DRAFT 1997 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - GENERAL PRINCIPLES FOR THE USE OF PRODUCTS AND SYSTEMS |
| EN 13294:2002 | Products and systems for the protection and repair of concrete structures - Test methods - Determination of stiffening time |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.