EN 16704-2-1:2016
Current
Current
The latest, up-to-date edition.
Railway applications - Track - Safety protection on the track during work - Part 2-1: Common solutions and technologies - Technical requirements for Track Warning Systems (TWS)
Published date
23-11-2016
Publisher
Sorry this product is not available in your region.
European foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Functional requirements
5 Non-functional requirements
Annex A (normative) - Specification of acoustic
warning signals
Annex B (normative) - Specification of optical
TWS signals
Bibliography
This European Standard defines minimum functional and non-functional requirements for developing a Track Warning Systems (TWS) to warn persons during their work on or nearby the track about the approaching of trains or rail vehicles using acoustical and visual TWS-Signals. These systems may also be able to influence the approaching of trains and rail vehicles by stoppage function.This European Standard is applicable:- to systems, sub-systems and components within TWS, including those containing software; in particular;- to new TWS;- to new integrations of systems, sub-systems and components into existing TWS;- to modifications of TWS developed according to this standard.For single warning units (e.g. simple electrical horns) it is recommended to use this standard, too.This document does not deal with:- hazards during the installation of the TWS caused by trains or rail vehicles on the lines;- hazards caused by the improper use of TWS;- hazards caused by the improper behaviour of persons working on or nearby the track;- CO2-tyfone, human operated pressure signal horns, flags, detonators or machine warning systems according to UIC 644;- national safety regulations to plan and operate TWS in track.
| Committee |
CEN/TC 256
|
| DevelopmentNote |
Supersedes PREN 16704-2-1. (11/2016)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Standards | Relationship |
| NS EN 16704-2-1 : 2016 | Identical |
| BS EN 16704-2-1:2016 | Identical |
| I.S. EN 16704-2-1:2016 | Identical |
| NF EN 16704-2-1 : 2017 | Identical |
| PN EN 16704-2-1 : 2017 | Identical |
| SN EN 16704-2-1:2017 | Identical |
| DIN EN 16704-2-1:2014-07 (Draft) | Identical |
| DIN EN 16704-2-1 E : 2017 | Identical |
| NEN EN 16704-2-1 : 2016 | Identical |
| UNI EN 16704-2-1 : 2017 | Identical |
| UNE-EN 16704-2-1:2017 | Identical |
| DIN EN 16704-2-1:2017-03 | Identical |
| I.S. EN 16704-2-2:2016 | RAILWAY APPLICATIONS - TRACK - SAFETY PROTECTION ON THE TRACK DURING WORK - PART 2-2: COMMON SOLUTIONS AND TECHNOLOGY - REQUIREMENTS FOR BARRIERS |
| DIN EN 16704-1:2017-11 | Railway applications - Track - Safety protection on the track during work - Part 1: Railway risks and common principles for protection of fixed and mobile work sites |
| BS EN 14033-3 : 2009 | RAILWAY APPLICATIONS - TRACK - RAILBOUND CONSTRUCTION AND MAINTENANCE MACHINES - PART 3: GENERAL SAFETY REQUIREMENTS |
| I.S. EN 14033-3:2017 | RAILWAY APPLICATIONS - TRACK - RAILBOUND CONSTRUCTION AND MAINTENANCE MACHINES - PART 3: GENERAL SAFETY REQUIREMENTS |
| UNE-EN 16704-1:2017 | Railway applications - Track - Safety protection on the track during work - Part 1: Railway risks and common principles for protection of fixed and mobile work sites |
| BS EN 16704-2-2:2016 | Railway applications. Track. Safety protection on the track during work Common solutions and technology. Requirements for barriers |
| BS EN 16704-1:2016 | Railway applications. Track. Safety protection on the track during work Railway risks and common principles for protection of fixed and mobile work sites |
| UNE-EN 16704-2-2:2017 | Railway applications - Track - Safety protection on the track during work - Part 2-2: Common solutions and technology - Requirements for barriers |
| I.S. EN 16704-1:2016 | RAILWAY APPLICATIONS - TRACK - SAFETY PROTECTION ON THE TRACK DURING WORK - PART 1: RAILWAY RISKS AND COMMON PRINCIPLES FOR PROTECTION OF FIXED AND MOBILE WORK SITES |
| EN 16704-2-2:2016 | Railway applications - Track - Safety protection on the track during work - Part 2-2: Common solutions and technology - Requirements for barriers |
| DIN EN 16704-1:2014-04 (Draft) | RAILWAY APPLICATIONS - TRACK - SAFETY PROTECTION ON THE TRACK DURING WORK - PART 1: RAILWAY RISKS AND COMMON PRINCIPLES FOR PROTECTION OF FIXED AND MOBILE WORK SITES |
| DIN EN 16704-2-2:2014-07 (Draft) | RAILWAY APPLICATIONS - TRACK - SAFETY PROTECTION ON THE TRACK DURING WORK - PART 2-2: COMMON SOLUTIONS AND TECHNOLOGY - REQUIREMENTS FOR BARRIERS |
| DIN EN 14033-3:2014-08 (Draft) | RAILWAY APPLICATIONS - TRACK - RAILBOUND CONSTRUCTION AND MAINTENANCE MACHINES - PART 3: GENERAL SAFETY REQUIREMENTS |
| EN 16704-1:2016 | Railway applications - Track - Safety protection on the track during work - Part 1: Railway risks and common principles for protection of fixed and mobile work sites |
| EN 14033-3:2017 | Railway applications - Track - Railbound construction and maintenance machines - Part 3: General safety requirements |
| DIN EN 16704-2-2:2017-03 | RAILWAY APPLICATIONS - TRACK - SAFETY PROTECTION ON THE TRACK DURING WORK - PART 2-2: COMMON SOLUTIONS AND TECHNOLOGY - REQUIREMENTS FOR BARRIERS |
| EN 50125-3 : 2003 COR 2010 | RAILWAY APPLICATIONS - ENVIRONMENTAL CONDITIONS FOR EQUIPMENT - PART 3: EQUIPMENT FOR SIGNALLING AND TELECOMMUNICATIONS |
| IEC 60068-2-5:2010 | Environmental testing - Part 2-5: Tests - Test Sa: Simulated solar radiation at ground level and guidance for solar radiation testing |
| EN 894-3:2000+A1:2008 | Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 3: Control actuators |
| EN 16704-1:2016 | Railway applications - Track - Safety protection on the track during work - Part 1: Railway risks and common principles for protection of fixed and mobile work sites |
| EN 14067-4:2013 | Railway applications - Aerodynamics - Part 4: Requirements and test procedures for aerodynamics on open track |
| UIC 730-3 : 3ED 2002 | AUTOMATIC WARNING OF TRACK MAINTENANCE GANGS |
| EN 50128:2011/AC:2014 | RAILWAY APPLICATIONS - COMMUNICATION, SIGNALLING AND PROCESSING SYSTEMS - SOFTWARE FOR RAILWAY CONTROL AND PROTECTION SYSTEMS |
| EN 60068-2-1:2007 | Environmental testing - Part 2-1: Tests - Test A: Cold |
| EN 14067-5:2006+A1:2010 | Railway applications - Aerodynamics - Part 5: Requirements and test procedures for aerodynamics in tunnels |
| EN 60068-2-2:2007 | Environmental testing - Part 2-2: Tests - Test B: Dry heat |
| UIC A158 RP 3/1 : 1996 | PART 1: SPECIFICATION FOR INDIVIDUAL AND GANG WARNING SYSTEMS FOR PERSONNEL WORKING ON THE TRACK |
| EN 50121-1:2017 | Railway applications - Electromagnetic compatibility - Part 1: General |
| EN 61000-2-4:2002/AC:2014 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 2-4: ENVIRONMENT - COMPATIBILITY LEVELS IN INDUSTRIAL PLANTS FOR LOW-FREQUENCY CONDUCTED DISTURBANCES |
| EN 60068-2-64:2008 | ENVIRONMENTAL TESTING - PART 2-64: TESTS - TEST FH: VIBRATION, BROADBAND RANDOM AND GUIDANCE |
| EN 61000-4-14:1999/A2:2009 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-14: TESTING AND MEASUREMENT TECHNIQUES - VOLTAGE FLUCTUATION IMMUNITY TEST FOR EQUIPMENT WITH INPUT CURRENT NOT EXCEEDING 16 A PER PHASE |
| ISO 12100:2010 | Safety of machinery — General principles for design — Risk assessment and risk reduction |
| UIC 644 : 2ED 1980 | WARNING DEVICES USED ON TRACTIVE UNITS EMPLOYED ON INTERNATIONAL SERVICES |
| EN ISO 11201:2010 | Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections (ISO 11201:2010) |
| EN 60068-2-27:2009 | Environmental testing - Part 2-27: Tests - Test Ea and guidance: Shock |
| EN 50129 : 2003 COR 2010 | RAILWAY APPLICATIONS - COMMUNICATION, SIGNALLING AND PROCESSING SYSTEMS - SAFETY RELATED ELECTRONIC SYSTEMS FOR SIGNALLING |
| EN 842:1996+A1:2008 | Safety of machinery - Visual danger signals - General requirements, design and testing |
| EN 50126-1:2017 | Railway Applications - The Specification and Demonstration of Reliability, Availability, Maintainability and Safety (RAMS) - Part 1: Generic RAMS Process |
| EN 50121-4:2016 | Railway applications - Electromagnetic compatibility - Part 4: Emission and immunity of the signalling and telecommunications apparatus |
| EN 14033-1:2017 | Railway applications - Track - Railbound construction and maintenance machines - Part 1: Technical requirements for running |
| EN ISO 12100:2010 | Safety of machinery - General principles for design - Risk assessment and risk reduction (ISO 12100:2010) |
| EN 14067-6:2010 | Railway applications - Aerodynamics - Part 6: Requirements and test procedures for cross wind assessment |
| EN 60068-2-78:2013 | Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state |
| EN 60068-2-6:2008 | Environmental testing - Part 2-6: Tests - Test Fc: Vibration (sinusoidal) |
| UIC A158 RP 3/2 : 1996 | PART 2: EXPLANATORY COMMENTS ON THE SPECIFICATION FOR INDIVIDUAL AND GANG WARNING SYSTEMS FOR PERSONNEL WORKING ON THE TRACK |
| PREN 15746-3 : DRAFT 2015 | RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 3: TECHNICAL REQUIREMENTS FOR RUNNING |
| EN 60529:1991/AC:2016-12 | DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015) |
| EN 60068-2-5:2011 | Environmental testing - Part 2-5: Tests - Test Sa: Simulated solar radiation at ground level and guidance for solar radiation testing |
| EN 61310-1:2008 | Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, acoustic and tactile signals |
| ISO 11201:2010 | Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections |
| EN 50159:2010 | Railway applications - Communication, signalling and processing systems - Safety-related communication in transmission systems |
| EN 60204-1 : 2006 COR 2010 | SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.