EN 1706:2010
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Aluminium and aluminium alloys - Castings - Chemical composition and mechanical properties
Superseded date
02-05-2020
Superseded by
Published date
10-03-2010
Publisher
Sorry this product is not available in your region.
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Ordering information
5 Designation systems
6 Chemical composition
7 Mechanical properties
8 Rounding rules for determination of compliance
Annex A (informative) - Mechanical properties of pressure die
cast alloys
Annex B (informative) - Comparison of casting characteristics,
mechanical and other properties
Annex C (informative) - Comparison between cast aluminium
alloy designations
Bibliography
This European Standard specifies the chemical composition limits for aluminium casting alloys and mechanical properties of separately cast test pieces for these alloys.Annex B is included as a guide to the selection of alloys for a specific use or process.This European Standard is intended to be used in conjunction with EN 576, EN 1559-1, EN 1559-4, EN 1676 and EN ISO 8062-3.
| Committee |
CEN/TC 132
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| DIN EN 1706:2013-12 | Identical |
| PN EN 1706 : 2011 | Identical |
| UNE-EN 1706:2011 | Identical |
| UNI EN 1706 : 2010 | Identical |
| NEN EN 1706 : 2010 | Identical |
| NS EN 1706 : 2010 | Identical |
| NBN EN 1706 : 2010 | Identical |
| NF EN 1706 : 2010 | Identical |
| I.S. EN 1706:2010 | Identical |
| SN EN 1706 : 2010 | Identical |
| BS EN 1706:2010 | Identical |
| ONORM EN 1706 : 2013 | Identical |
| DIN EN 1706:2019-03 (Draft) | Identical |
| UNE-EN 13195:2014 | Aluminium and aluminium alloys - Specifications for wrought and cast products for marine applications (shipbuilding, marine and offshore) |
| DIN EN 124-3:2015-09 | GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS - PART 3: GULLY TOPS AND MANHOLE TOPS MADE OF STEEL OR ALUMINIUM ALLOYS |
| UNI EN ISO 4521 : 2008 | METALLIC AND OTHER INORGANIC COATINGS - ELECTRODEPOSITED SILVER AND SILVER ALLOY COATINGS FOR ENGINEERING PURPOSES - SPECIFICATION AND TEST METHODS |
| DD CLC/TS 50537-2:2010 | Railway applications. Mounted parts of the traction transformer and cooling system Pump for insulating liquid for traction transformers and reactors |
| BS EN 12693:2008 | Refrigerating systems and heat pumps. Safety and environmental requirements. Positive displacement refrigerant compressors |
| UNI EN 1090-3 : 2008 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL REQUIREMENTS FOR ALUMINIUM STRUCTURES |
| 13/30286636 DC : 0 | BS EN 1559-4 - FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 4: ADDITIONAL REQUIREMENTS FOR ALUMINIUM ALLOY CASTINGS |
| 10/30234610 DC : DRAFT NOV 2010 | BS EN 14420-3 - HOSE FITTINGS WITH CLAMP UNITS - PART 3: CLAMP UNITS, BOLTED OR PINNED |
| 14/30301152 DC : 0 | BS EN 12392 - ALUMINIUM AND ALUMINIUM ALLOYS - WROUGHT PRODUCTS AND CAST PRODUCTS - SPECIAL REQUIREMENTS FOR PRODUCTS INTENDED FOR THE PRODUCTION OF PRESSURE EQUIPMENT |
| BS EN ISO 27874:2008 | Metallic coatings. Electrodeposited gold and gold alloy coatings for electrical, electronic and engineering purposes. Specification and test methods |
| I.S. EN 15646:2009 | ELECTRODEPOSITED COATINGS - ELECTROPLATED COATINGS OF ALUMINIUM AND ALUMINIUM ALLOYS WITH SUPPLEMENTARY TREATMENT - REQUIREMENTS AND TEST METHODS |
| 10/30234616 DC : 0 | BS EN 14420-7 - HOSE FITTINGS WITH CLAMP UNITS - PART 7: CAM LOCKING COUPLINGS |
| DIN EN 13195:2013-12 | ALUMINIUM AND ALUMINIUM ALLOYS - SPECIFICATIONS FOR WROUGHT AND CAST PRODUCTS FOR MARINE APPLICATIONS (SHIPBUILDING, MARINE AND OFFSHORE) |
| 10/30234619 DC : 0 | BS EN 14420-2 - HOSE FITTINGS WITH CLAMP UNITS - PART 2: HOSE SIDE PARTS OF HOSE TAIL |
| PREN 12392 : DRAFT 2014 | ALUMINIUM AND ALUMINIUM ALLOYS - WROUGHT PRODUCTS AND CAST PRODUCTS - SPECIAL REQUIREMENTS FOR PRODUCTS INTENDED FOR THE PRODUCTION OF PRESSURE EQUIPMENT |
| UNE-EN 15646:2010 | Electrodeposited coatings - Electroplated coatings of aluminium and aluminium alloys with supplementary treatment - Requirements and test methods |
| I.S. ENV 1999-2:1998 | EUROCODE 9: DESIGN OF ALUMINIUM STRUCTURES - PART 2: STRUCTURES SUSCEPTIBLE TO FATIGUE |
| I.S. EN 1090-3:2008 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL REQUIREMENTS FOR ALUMINIUM STRUCTURES |
| CEI CLC/TS 50537-2 : 2011 | RAILWAY APPLICATIONS - MOUNTED PARTS OF THE TRACTION TRANSFORMER AND COOLING SYSTEM - PART 2: PUMP FOR INSULATING LIQUID FOR TRACTION TRANSFORMERS AND REACTORS |
| UNI EN 912 : 2011 | TIMBER FASTENERS - SPECIFICATIONS FOR CONNECTORS FOR TIMBER |
| I.S. EN ISO 27874:2008 | METALLIC AND OTHER INORGANIC COATINGS - ELECTRODEPOSITED GOLD AND GOLD ALLOY COATINGS FOR ELECTRICAL, ELECTRONIC AND ENGINEERING PURPOSES - SPECIFICATION AND TEST METHODS |
| UNE-EN ISO 2081:2010 | Metallic and other inorganic coatings - Electroplated coatings of zinc with supplementary treatments on iron or steel (ISO 2081:2008) |
| BS EN ISO 2081:2018 | Metallic and other inorganic coatings. Electroplated coatings of zinc with supplementary treatments on iron or steel |
| 17/30244737 DC : 0 | BS EN 17149 - RAILWAY APPLICATIONS - FATIGUE STRENGTH ASSESSMENT OF RAILWAY VEHICLE STRUCTURES BASED ON CUMULATIVE DAMAGE |
| ONORM EN 1090-3 : 2008 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL REQUIREMENTS FOR ALUMINIUM STRUCTURES |
| DIN EN ISO 2081:2016-04 (Draft) | METALLIC AND OTHER INORGANIC COATINGS - ELECTROPLATED COATINGS OF ZINC WITH SUPPLEMENTARY TREATMENTS ON IRON OR STEEL |
| DIN EN 1676:2010-06 | ALUMINIUM AND ALUMINIUM ALLOYS - ALLOYED INGOTS FOR REMELTING - SPECIFICATIONS |
| BS EN 912:2011 | Timber fasteners. Specifications for connectors for timbers |
| BS EN 1676:2010 | Aluminium and aluminium alloys. Alloyed ingots for remelting. Specifications |
| BS EN 14420-3:2013 | Hose fittings with clamp units Clamp units, bolted or pinned |
| BS EN 14420-7:2013 | Hose fittings with clamp units Cam locking couplings |
| I.S. EN 912:2011 | TIMBER FASTENERS - SPECIFICATIONS FOR CONNECTORS FOR TIMBERS |
| EN 50052:2016 | High-voltage switchgear and controlgear - Gas-filled cast aluminium alloy enclosures |
| EN 13195:2013 | Aluminium and aluminium alloys - Specifications for wrought and cast products for marine applications (shipbuilding, marine and offshore) |
| CEN/TR 17144:2017 | Resistance of metallic materials to liquid biogenic and alternative fuels and their blends |
| EN 124-3:2015 | Gully tops and manhole tops for vehicular and pedestrian areas - Part 3: Gully tops and manhole tops made of steel or aluminium alloys |
| UNE-EN 1676:2011 | Aluminium and aluminium alloys - Alloyed ingots for remelting - Specifications |
| I.S. EN 12284:2003 | REFRIGERATING SYSTEMS AND HEAT PUMPS - VALVES - REQUIREMENTS, TESTING AND MARKING |
| EN 12693:2008 | Refrigerating systems and heat pumps - Safety and environmental requirements - Positive displacement refrigerant compressors |
| EN 13195-1 : 2002 | ALUMINIUM AND ALUMINIUM ALLOYS - WROUGHT AND CAST PRODUCTS FOR MARINE APPLICATIONS (SHIPBUILDING, MARINE AND OFFSHORE) - PART 1: SPECIFICATIONS |
| EN 12392:2016 | Aluminium and aluminium alloys - Wrought products and cast products - Special requirements for products intended for the production of pressure equipment |
| DIN EN 13195-1:2002-11 | ALUMINIUM AND ALUMINIUM ALLOYS - WROUGHT AND CAST PRODUCTS FOR MARINE APPLICATIONS (SHIPBUILDING, MARINE AND OFFSHORE) - PART 1: SPECIFICATIONS |
| DIN EN ISO 4527:2003-10 | METALLIC COATINGS - AUTOCATALYTIC (ELECTROLESS) NICKEL-PHOSPHORUS ALLOY COATINGS SPECIFICATION AND TEST METHODS |
| 17/30364387 DC : 0 | BS EN 50069 - HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - GAS-FILLED WELDED COMPOSITE ENCLOSURES OF CAST AND WROUGHT ALUMINIUM ALLOYS |
| PREN 1090-3 : DRAFT 2017 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL REQUIREMENTS FOR ALUMINIUM STRUCTURES |
| UNI EN 13195 : 2013 | ALUMINIUM AND ALUMINIUM ALLOYS - SPECIFICATIONS FOR WROUGHT AND CAST PRODUCTS FOR MARINE APPLICATIONS (SHIPBUILDING, MARINE AND OFFSHORE) |
| 03/317246 DC : 0 | ISO 2081 - METALLIC COATINGS - ELECTROPLATED COATINGS OF ZINC WITH SUPPLEMENTARY TREATMENTS ON IRON OR STEEL |
| I.S. EN 13611:2015 | SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
| 10/30234631 DC : 0 | BS EN 14420-8 - HOSE FITTINGS WITH CLAMP UNITS - PART 8: SYMMETRICAL HALF COUPLING (GUILLEMIN SYSTEM) |
| 10/30234613 DC : DRAFT NOV 2010 | BS EN 14420-4 - HOSE FITTINGS WITH CLAMP UNITS - PART 4: FLANGE CONNECTIONS |
| EN ISO 2081:2018 | Metallic and other inorganic coatings - Electroplated coatings of zinc with supplementary treatments on iron or steel (ISO 2081:2018) |
| CLC/TS 50537-2:2010 | Railway applications - Mounted parts of the traction transformer and cooling system - Part 2: Pump for insulating liquid for traction transformers and reactors |
| PREN 1559-4 : DRAFT 2013 | FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 4: ADDITIONAL REQUIREMENTS FOR ALUMINIUM ALLOY CASTINGS |
| BS EN 50052:2016 | High-voltage switchgear and controlgear. Gas-filled cast aluminium alloy enclosures |
| CLC/TS 50537-3:2010 | Railway applications - Mounted parts of the traction transformer and cooling system - Part 3: Water pump for traction converters |
| 04/30050372 DC : DRAFT JUN 2004 | EN 13981-3 - ALUMINIUM AND ALUMINIUM ALLOYS - PRODUCTS FOR STRUCTURAL RAILWAY APPLICATIONS - TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY - PART 3: CASTINGS |
| 07/30161646 DC : 0 | BS EN 15646 - ELECTRODEPOSITED COATINGS - ELECTROPLATED COATINGS OF ALUMINIUM AND ALUMINIUM ALLOYS WITH SUPPLEMENTARY TREATMENT - REQUIREMENTS AND TEST METHODS |
| BS EN ISO 4521:2008 | Metallic and other inorganic coatings. Electrodeposited silver and silver alloy coatings for engineering purposes. Specification and test methods |
| 07/30167467 DC : 0 | BS EN ISO 27874 - METALLIC COATINGS - ELECTRODEPOSITED GOLD AND GOLD ALLOY COATINGS FOR ELECTRICAL, ELECTRONIC AND ENGINEERING PURPOSES - SPECIFICATION AND TEST METHODS |
| I.S. EN ISO 2081:2018 | METALLIC AND OTHER INORGANIC COATINGS - ELECTROPLATED COATINGS OF ZINC WITH SUPPLEMENTARY TREATMENTS ON IRON OR STEEL (ISO 2081:2018) |
| PREN 4632-002 : 200P1 | AEROSPACE SERIES - WELDED AND BRAZED ASSEMBLIES FOR AEROSPACE CONSTRUCTIONS - WELDABILITY AND BRAZEABILITY OF MATERIALS - PART 002: HOMOGENEOUS ASSEMBLIES ALUMINIUM AND ALUMINIUM ALLOYS |
| BS EN 1999-1-1 : 2007 | EUROCODE 9: DESIGN OF ALUMINIUM STRUCTURES - PART 1-1: GENERAL STRUCTURAL RULES |
| I.S. EN 1999-1-1:2007 | EUROCODE 9: DESIGN OF ALUMINIUM STRUCTURES - PART 1-1: GENERAL STRUCTURAL RULES (INCLUDING IRISH NATIONAL ANNEX) |
| BS EN 13611:2015 | Safety and control devices for burners and appliances burning gaseous and/or liquid fuels. General requirements |
| ISO/TR 17671-4:2002 | Welding Recommendations for welding of metallic materials Part 4: Arc welding of aluminium and aluminium alloys |
| 17/30360051 DC : 0 | BS EN 13611 - SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
| UNE-EN ISO 4521:2010 | Metallic and other inorganic coatings - Electrodeposited silver and silver alloy coatings for engineering purposes - Specification and test methods (ISO 4521:2008) |
| NF EN 4632-002 : 2008 | AEROSPACE SERIES - WELDED AND BRAZED ASSEMBLIES FOR AEROSPACE CONSTRUCTIONS - WELDABILITY AND BRAZEABILITY OF MATERIALS - PART 002: HOMOGENEOUS ASSEMBLIES ALUMINIUM AND ALUMINIUM ALLOYS |
| S.R. CEN/TR 16748:2014 | ALUMINIUM AND ALUMINIUM ALLOYS - MECHANICAL POTENTIAL OF AL-SI ALLOYS FOR HIGH PRESSURE, LOW PRESSURE AND GRAVITY DIE CASTING |
| I.S. EN 50052:2016 | HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - GAS-FILLED CAST ALUMINIUM ALLOY ENCLOSURES |
| DIN EN 12284:2004-01 | Refrigerating systems and heat pumps - Valves - Requirements, testing and marking |
| DIN EN 12487:2007-07 | Corrosion protection of metals - Rinsed and non-rinsed chromate conversion coatings on aluminium and aluminium alloys |
| DIN EN 1559-4:2015-05 | FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 4: ADDITIONAL REQUIREMENTS FOR ALUMINIUM ALLOY CASTINGS |
| DIN EN 13981-3:2006-12 | Aluminium and aluminium alloys - Products for structural railway applications, Technical conditions for inspection and delivery - Part 3: Castings |
| BS EN ISO 4527:2003 | Metallic coatings. Autocatalytic (electroless) nickel-phosphorus alloy coatings. Specification and test methods |
| BS EN 1462:2004 | Brackets for eaves gutters. Requirements and testing |
| I.S. EN 1462:2004 | BRACKETS FOR EAVES GUTTERS - REQUIREMENTS AND TESTING |
| I.S. EN 14420-8:2013 | HOSE FITTINGS WITH CLAMP UNITS - PART 8: SYMMETRICAL HALF COUPLING (GUILLEMIN SYSTEM) |
| DIN EN 14420-8:2016-06 | HOSE FITTINGS WITH CLAMP UNITS - PART 8: SYMMETRICAL HALF COUPLING (GUILLEMIN SYSTEM) |
| DIN EN 14420-3:2013-09 | HOSE FITTINGS WITH CLAMP UNITS - PART 3: CLAMP UNITS, BOLTED OR PINNED |
| I.S. EN 1559-4:2015 | FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 4: ADDITIONAL REQUIREMENTS FOR ALUMINIUM ALLOY CASTINGS |
| UNE-EN 1676:2011 | ALUMINIUM AND ALUMINIUM ALLOYS - ALLOYED INGOTS FOR REMELTING - SPECIFICATIONS |
| DIN EN 13611:2019-06 | Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - General requirements |
| I.S. EN 14420-2:2013 | HOSE FITTINGS WITH CLAMP UNITS - PART 2: HOSE SIDE PARTS OF HOSE TAIL |
| DIN EN 14420-7:2013-09 | Hose fittings with clamp units - Part 7: Cam locking couplings |
| S.R. CEN/TR 17144:2017 | RESISTANCE OF METALLIC MATERIALS TO LIQUID BIOGENIC AND ALTERNATIVE FUELS AND THEIR BLENDS |
| I.S. EN 12487:2007 | CORROSION PROTECTION OF METALS - RINSED AND NON-RINSED CHROMATE CONVERSION COATINGS ON ALUMINIUM AND ALUMINIUM ALLOYS |
| I.S. EN 13195-1:2002 | ALUMINIUM AND ALUMINIUM ALLOYS - WROUGHT AND CAST PRODU- PART 1: SPECIFICATIONS (SHIPBUILDING, MARINE AND OFFSHORE) |
| I.S. EN 12392:2016 | ALUMINIUM AND ALUMINIUM ALLOYS - WROUGHT PRODUCTS AND CAST PRODUCTS - SPECIAL REQUIREMENTS FOR PRODUCTS INTENDED FOR THE PRODUCTION OF PRESSURE EQUIPMENT |
| DIN EN ISO 27874:2009-01 | METALLIC AND OTHER INORGANIC COATINGS - ELECTRODEPOSITED GOLD AND GOLD ALLOY COATINGS FOR ELECTRICAL, ELECTRONIC AND ENGINEERING PURPOSES - SPECIFICATION AND TEST METHODS |
| I.S. EN 14420-3:2013 | HOSE FITTINGS WITH CLAMP UNITS - PART 3: CLAMP UNITS, BOLTED OR PINNED |
| DIN EN 14420-2:2013-09 | Hose fittings with clamp units - Part 2: Hose side parts of hose tail |
| DIN EN 14420-4:2013-09 | Hose fittings with clamp units - Part 4: Flange connections |
| I.S. EN 14420-4:2013 | HOSE FITTINGS WITH CLAMP UNITS - PART 4: FLANGE CONNECTIONS |
| I.S. EN 14420-7:2013 | HOSE FITTINGS WITH CLAMP UNITS - PART 7: CAM LOCKING COUPLINGS |
| SBAC TS 260 : 5 | METALLIC MATERIALS - LIST OF ALTERNATIVE MATERIAL SPECIFICATIONS & STANDARDS ONLY AUTHORISED FOR USE ON ADS STANDARD PARTS |
| ASME PV CODE 2B : 2017 | BOILER AND PRESSURE VESSEL CODE - MATERIALS - NONFERROUS MATERIAL SPECIFICATIONS |
| CEI CLC/TS 50537-3 : 2011 | RAILWAY APPLICATIONS - MOUNTED PARTS OF THE TRACTION TRANSFORMER AND COOLING SYSTEM - PART 3: WATER PUMP FOR TRACTION CONVERTERS |
| DIN EN 1999-1-1:2014-03 | Eurocode 9: Design of aluminium structures - Part 1-1: General structural rules |
| 05/30133060 DC : 0 | EN 1090-3 - EXECUTION OF STEEL AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL RULES FOR EXECUTION OF ALUMINIUM STRUCTURES |
| UNI EN 12693 : 2008 | REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - POSITIVE DISPLACEMENT REFRIGERANT COMPRESSORS |
| PD CEN/TR 16748:2014 | Aluminium and aluminium alloys. Mechanical potential of Al-Si alloys for high pressure, low pressure and gravity die casting |
| BS EN 124-3:2015 | Gully tops and manhole tops for vehicular and pedestrian areas Gully tops and manhole tops made of steel or aluminium alloys |
| 12/30265304 DC : 0 | BS EN 124-3 - GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS - PART 3: GULLY TOPS AND MANHOLE TOPS MADE FROM STEEL OR ALUMINIUM ALLOY |
| PREN 50069 : DRAFT 2017 | HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - GAS-FILLED WELDED COMPOSITE ENCLOSURES OF CAST AND WROUGHT ALUMINIUM ALLOYS |
| CEN ISO/TR 20172:2009 | Welding - Grouping systems for materials - European materials (ISO/TR 20172:2009) |
| 10/30234607 DC : 0 | BS EN 14422 - CLAMP TYPE COUPLING ASSEMBLIES FOR LPG TRANSFER HOSES |
| BS EN 15646:2009 | Electrodeposited coatings. Electroplated coatings of aluminium and aluminium alloys with supplementary treatment. Requirements and test methods |
| UNI EN 15646 : 2009 | ELECTRODEPOSITED COATINGS - ELECTROPLATED COATINGS OF ALUMINIUM AND ALUMINIUM ALLOYS WITH SUPPLEMENTARY TREATMENT - REQUIREMENTS AND TEST METHODS |
| PD CEN ISO/TR 20172:2009 | Welding. Grouping systems for materials. European materials |
| ISO 2081:2018 | Metallic and other inorganic coatings — Electroplated coatings of zinc with supplementary treatments on iron or steel |
| I.S. EN ISO 4521:2008 | METALLIC AND OTHER INORGANIC COATINGS - ELECTRODEPOSITED SILVER AND SILVER ALLOY COATINGS FOR ENGINEERING PURPOSES - SPECIFICATION AND TEST METHODS |
| PREN 14420-4 : DRAFT 2010 | HOSE FITTINGS WITH CLAMP UNITS - PART 4: FLANGE CONNECTIONS |
| S.R. CEN ISO TR 20172:2009 | WELDING - GROUPING SYSTEMS FOR MATERIALS - EUROPEAN MATERIALS |
| CEN/TR 16748:2014 | Aluminium and aluminium alloys - Mechanical potential of Al-Si alloys for high pressure, low pressure and gravity die casting |
| S.R. CLC/TS 50537-2:2010 | RAILWAY APPLICATIONS - MOUNTED PARTS OF THE TRACTION TRANSFORMER AND COOLING SYSTEM - PART 2: PUMP FOR INSULATING LIQUID FOR TRACTION TRANSFORMERS AND REACTORS |
| EN 1090-3:2008 | Execution of steel structures and aluminium structures - Part 3: Technical requirements for aluminium structures |
| DIN EN 12392:2016-08 | Aluminium and aluminium alloys - Wrought products and cast products - Special requirements for products intended for the production of pressure equipment |
| DIN EN 1462:2004-12 | Brackets for eaves gutters - Requirements and testing; German version EN 1462:2004 |
| BS EN 13195-1:2002 | Aluminium and aluminium alloys. Wrought and cast products for marine applications (shipbuilding, marine and offshore) Specifications |
| ISO 4526:2004 | Metallic coatings Electroplated coatings of nickel for engineering purposes |
| BS EN 601:2004 | Aluminum and aluminium alloys. Castings. Chemical composition of castings for use in contact with foodstuff |
| UNE-EN 14420-7:2014 | Hose fittings with clamp units - Part 7: Cam locking couplings |
| BS EN 40-6:2002 | Lighting columns Requirements for aluminium lighting columns |
| UNI EN 1676 : 2010 | ALUMINIUM AND ALUMINIUM ALLOYS - ALLOYED INGOTS FOR REMELTING - SPECIFICATIONS |
| EN ISO 4521:2008 | Metallic and other inorganic coatings - Electrodeposited silver and silver alloy coatings for engineering purposes - Specification and test methods (ISO 4521:2008) |
| UNI EN 14420-2 : 2013 | HOSE FITTINGS WITH CLAMP UNITS - PART 2: HOSE SIDE PARTS OF HOSE TAIL |
| UNI EN 1106 : 2010 | MANUALLY OPERATED TAPS FOR GAS BURNING APPLIANCES |
| EN ISO 27874:2008 | Metallic and other inorganic coatings - Electrodeposited gold and gold alloy coatings for electrical, electronic and engineering purposes - Specification and test methods (ISO 27874:2008) |
| UNI EN 1854 : 2010 | PRESSURE SENSING DEVICES FOR GAS BURNERS AND GAS BURNING APPLIANCES |
| UNI EN 14420-7 : 2013 | HOSE FITTINGS WITH CLAMP UNITS - PART 7: CAM LOCKING COUPLINGS |
| UNI EN 14420-3 : 2013 | HOSE FITTINGS WITH CLAMP UNITS - PART 3: CLAMP UNITS, BOLTED OR PINNED |
| UNI EN 14420-4 : 2013 | HOSE FITTINGS WITH CLAMP UNITS - PART 4: FLANGE CONNECTIONS |
| DIN 390:2002-04 | Hand-wheels, dished - Hub hole with straight square |
| PREN 14420-2 : DRAFT 2010 | HOSE FITTINGS WITH CLAMP UNITS - PART 2: HOSE SIDE PARTS OF HOSE TAIL |
| 16/30329239 DC : 0 | BS EN ISO 2081 - METALLIC AND OTHER INORGANIC COATINGS - ELECTROPLATED COATINGS OF ZINC WITH SUPPLEMENTARY TREATMENTS ON IRON OR STEEL |
| UNI EN 1999-1-1 : 2014 | EUROCODE 9: DESIGN OF ALUMINIUM STRUCTURES - PART 1-1: GENERAL STRUCTURAL RULES |
| 12/30257022 DC : 0 | BS EN 13611 - SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS OR LIQUID FUELS - GENERAL REQUIREMENTS |
| DD ENV 1999-2:2000 | Eurocode 9. Design of aluminium structures Structures susceptible to fatigue |
| PREN 14420-7 : DRAFT 2010 | HOSE FITTINGS WITH CLAMP UNITS - PART 7: CAM LOCKING COUPLINGS |
| BS EN 4632-002:2008 | Aerospace series. Welded and brazed assemblies for aerospace constructions. Weldability and brazeability of materials Homogeneous assemblies aluminium and aluminium alloys |
| UNE-EN 50052:2017 | High-voltage switchgear and controlgear - Gas-filled cast aluminium alloy enclosures |
| DIN 3220:2002-04 | Hand-wheels, flat type - Hub hole with tapered square |
| BS EN 1090-3:2008 | Execution of steel structures and aluminium structures Technical requirements for aluminium structures |
| DIN EN 13611:2016-09 | SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
| 17/30348949 DC : 0 | BS EN 1090-3 - EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL REQUIREMENTS FOR ALUMINIUM STRUCTURES |
| PREN 13611 : DRAFT 2017 | SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
| DIN EN 12693:2016-10 (Draft) | REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - POSITIVE DISPLACEMENT REFRIGERANT COMPRESSORS |
| I.S. EN 12693:2008 | REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - POSITIVE DISPLACEMENT REFRIGERANT COMPRESSORS |
| EN 12480:2018 | Gas meters - Rotary displacement gas meters |
| I.S. EN 13195:2013 | ALUMINIUM AND ALUMINIUM ALLOYS - SPECIFICATIONS FOR WROUGHT AND CAST PRODUCTS FOR MARINE APPLICATIONS (SHIPBUILDING, MARINE AND OFFSHORE) |
| I.S. EN 12480:2018 | GAS METERS - ROTARY DISPLACEMENT GAS METERS |
| DIN EN 601:2004-07 | Aluminium and aluminium alloys - Castings - Chemical composition of castings for use in contact with foodstuff; German version EN 601:2004 |
| DIN EN 912:2011-09 | Timber fasteners - Specifications for connectors for timbers |
| BS EN 12392:2016 | Aluminium and aluminium alloys. Wrought products and cast products. Special requirements for products intended for the production of pressure equipment |
| BS EN 12487:2007 | Corrosion protection of metals. Rinsed and non-rinsed chromate conversion coatings on aluminium and aluminium alloys |
| BS EN 12284:2003 | Refrigerating systems and heat pumps. Valves. Requirements, testing and marking |
| BS EN ISO 4526:2004 | Metallic coatings. Electroplated coatings of nickel for engineering purposes |
| ISO 4521:2008 | Metallic and other inorganic coatings — Electrodeposited silver and silver alloy coatings for engineering purposes — Specification and test methods |
| BS EN 14420-2:2013 | Hose fittings with clamp units Hose side parts of hose tail |
| EN 1676:2010 | Aluminium and aluminium alloys - Alloyed ingots for remelting - Specifications |
| BS EN 1780-2:2002 | Aluminium and aluminium alloys. Designation of unalloyed and alloyed aluminium ingots for remelting, master alloys and castings Chemical symbol based designation system |
| BS EN 13920-12:2003 | Aluminium and aluminium alloys. Scrap Turnings consisting of one single alloy |
| DIN EN 15088:2016-09 (Draft) | Aluminium and aluminium alloys - Structural products for construction works - Technical conditions for inspection and delivery; German and English version prEN 15088:2016 |
| BS EN 1780-3:2002 | Aluminium and aluminium alloys. Designation of unalloyed and alloyed aluminium ingots for remelting, master alloys and castings Writing rules for chemical composition |
| BS EN 15088:2005 | Aluminium and aluminium alloys. Structural products for construction works. Technical conditions for inspection and delivery |
| BS EN 14420-4:2013 | Hose fittings with clamp units Flange connections |
| UNE-EN 12392:2017 | Aluminium and aluminium alloys - Wrought products and cast products - Special requirements for products intended for the production of pressure equipment |
| I.S. EN 1676:2010 | ALUMINIUM AND ALUMINIUM ALLOYS - ALLOYED INGOTS FOR REMELTING - SPECIFICATIONS |
| BS EN 13981-3:2006 | Aluminium and aluminium alloys. Products for structural railway applications. Technical conditions for inspection and delivery Castings |
| UNE-EN 14420-3:2014 | Hose fittings with clamp units - Part 3: Clamp units, bolted or pinned |
| EN 13920-12:2003 | Aluminium and aluminium alloys - Scrap - Part 12: Turnings consisting of one single alloy |
| EN 601:2004 | Aluminium and aluminium alloys - Castings - Chemical composition of castings for use in contact with foodstuff |
| EN 1780-3:2002 | Aluminium and aluminium alloys - Designation of alloyed aluminium ingots for remelting, master alloys and castings - Part 3: Writing rules for chemical composition |
| EN 14420-2:2013 | Hose fittings with clamp units - Part 2: Hose side parts of hose tail |
| EN 1462:2004 | Brackets for eaves gutters - Requirements and testing |
| EN 15088:2005 | Aluminium and aluminium alloys - Structural products for construction works - Technical conditions for inspection and delivery |
| EN 13981-3:2006 | Aluminium and aluminium alloys - Products for structural railway applications - Technical conditions for inspection and delivery - Part 3: Castings |
| EN ISO 4526:2004 | Metallic coatings - Electroplated coatings of nickel for engineering purposes (ISO 4526:2004) |
| EN 1780-2:2002 | Aluminium and aluminium alloys - Designation of alloyed aluminium ingots for remelting, master alloys and castings - Part 2: Chemical symbol based designation system |
| EN 14420-4:2013 | Hose fittings with clamp units - Part 4: Flange connections |
| EN 4632-002:2008 | Aerospace series - Welded and brazed assemblies for aerospace constructions - Weldability and brazeability of materials - Part 002: Homogeneous assemblies aluminium and aluminium alloys |
| EN 14420-7:2013 | Hose fittings with clamp units - Part 7: Cam locking couplings |
| EN 40-6:2002 | Lighting columns - Part 6: Requirements for aluminium lighting columns |
| EN 15646:2009 | Electrodeposited coatings - Electroplated coatings of aluminium and aluminium alloys with supplementary treatment - Requirements and test methods |
| EN 1559-4:2015 | Founding - Technical conditions of delivery - Part 4: Additional requirements for aluminium alloy castings |
| EN 912:2011 | Timber fasteners - Specifications for connectors for timbers |
| EN 14420-8:2013+A1:2016 | Hose fittings with clamp units - Part 8: Symmetrical half coupling (Guillemin system) |
| EN ISO 4527:2003 | Metallic coatings - Autocatalytic (electroless) nickel-phosphorus alloy coatings - Specification and test methods (ISO 4527:2003) |
| EN 14420-3:2013 | Hose fittings with clamp units - Part 3: Clamp units, bolted or pinned |
| UNI EN ISO 27874 : 2008 | METALLIC AND OTHER INORGANIC COATINGS - ELECTRODEPOSITED GOLD AND GOLD ALLOY COATINGS FOR ELECTRICAL, ELECTRONIC AND ENGINEERING PURPOSES - SPECIFICATION AND TEST METHODS |
| PREN 14420-3 : DRAFT 2010 | HOSE FITTINGS WITH CLAMP UNITS - PART 3: CLAMP UNITS, BOLTED OR PINNED |
| BS EN 13195:2013 | Aluminium and aluminium alloys. Specifications for wrought and cast products for marine applications (shipbuilding, marine and offshore) |
| PREN 14422 : DRAFT 2010 | CLAMP TYPE COUPLING ASSEMBLIES FOR LPG TRANSFER HOSES |
| DD CLC/TS 50537-3:2010 | Railway applications. Mounted parts of the traction transformer and cooling system Water pump for traction converters |
| S.R. CEN ISO/TR 20172:2021 | Welding - Grouping systems for materials - European materials (ISO/TR 20172:2021) |
| PD CEN/TR 17144:2017 | Resistance of metallic materials to liquid biogenic and alternative fuels and their blends |
| DIN 3319:2002-04 | Hand-wheels, dished - Hub hole with tapered square |
| UNE-EN 124-3:2015 | Gully tops and manhole tops for vehicular and pedestrian areas - Part 3: Gully tops and manhole tops made of steel or aluminium alloys |
| BS ISO 4526 : 2004 AMD 15798 | METALLIC COATINGS - ELECTROPLATED COATINGS OF NICKEL FOR ENGINEERING PURPOSES |
| 04/30125694 DC : DRAFT NOV 2004 | EN 15088 - ALUMINIUM AND ALUMINIUM ALLOYS - STRUCTURAL PRODUCTS FOR CONSTRUCTION WORKS - TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
| PREN 14420-8 : DRAFT 2010 | HOSE FITTINGS WITH CLAMP UNITS - PART 8: SYMMETRICAL HALF COUPLING (GUILLEMIN SYSTEM) |
| 17/30360728 DC : DRAFT MAY 2017 | BS EN ISO 2081 - METALLIC AND OTHER INORGANIC COATINGS - ELECTROPLATED COATINGS OF ZINC WITH SUPPLEMENTARY TREATMENTS ON IRON OR STEEL |
| I.S. CEN ISO TR 20172:2006 | WELDING - GROUPING SYSTEMS FOR MATERIALS - EUROPEAN MATERIALS |
| I.S. EN 124-3:2015 | GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS - PART 3: GULLY TOPS AND MANHOLE TOPS MADE OF STEEL OR ALUMINIUM ALLOYS |
| DIN EN 1090-3:2008-09 | EXECUTION OF STEEL AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL RULES FOR EXECUTION OF ALUMINIUM STRUCTURES |
| UNI EN ISO 2081 : 2009 | METALLIC AND OTHER INORGANIC COATINGS - ELECTROPLATED COATINGS OF ZINC WITH SUPPLEMENTARY TREATMENTS ON IRON OR STEEL |
| UNE-EN 1090-3:2011 | Execution of steel structures and aluminium structures - Part 3: Technical requirements for aluminium structures |
| UNE-EN 13611:2016 | Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - General requirements |
| UNE-EN ISO 27874:2010 | Metallic and other inorganic coatings - Electrodeposited gold and gold alloy coatings for electrical, electronic and engineering purposes - Specification and test methods (ISO 27874:2008) |
| S.R. CLC/TS 50537-3:2010 | RAILWAY APPLICATIONS - MOUNTED PARTS OF THE TRACTION TRANSFORMER AND COOLING SYSTEM - PART 3: WATER PUMP FOR TRACTION CONVERTERS |
| I.S. EN 4632-002:2008 | AEROSPACE SERIES - WELDED AND BRAZED ASSEMBLIES FOR AEROSPACE CONSTRUCTIONS - WELDABILITY AND BRAZEABILITY OF MATERIALS - PART 002: HOMOGENEOUS ASSEMBLIES ALUMINIUM AND ALUMINIUM ALLOYS |
| DIN EN 1780-3:2003-01 | ALUMINIUM AND ALUMINIUM ALLOYS - DESIGNATION OF ALLOYED ALUMINIUM INGOTS FOR REMELTING, MASTER ALLOYS AND CASTINGS - PART 3: WRITING RULES FOR CHEMICAL COMPOSITION |
| UNE-EN 912:2011 | Timber fasteners - Specifications for connectors for timbers |
| BS EN 1559-4:2015 | Founding. Technical conditions of delivery Additional requirements for aluminium alloy castings |
| BS EN 14420-8 : 2013 | HOSE FITTINGS WITH CLAMP UNITS - PART 8: SYMMETRICAL HALF COUPLING (GUILLEMIN SYSTEM) |
| ISO 27874:2008 | Metallic and other inorganic coatings — Electrodeposited gold and gold alloy coatings for electrical, electronic and engineering purposes — Specification and test methods |
| ISO 4527:2003 | Metallic coatings Autocatalytic (electroless) nickel-phosphorus alloy coatings Specification and test methods |
| BS EN 1011-4:2000 | Welding. Recommendations for welding of metallic materials Arc welding of aluminium and aluminium alloys |
| ISO/TR 20172:2009 | Welding Grouping systems for materials European materials |
| DIN EN 12693:2008-09 | REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - POSITIVE DISPLACEMENT REFRIGERANT COMPRESSORS |
| DIN EN ISO 2081:2009-05 | METALLIC AND OTHER INORGANIC COATINGS - ELECTROPLATED COATINGS OF ZINC WITH SUPPLEMENTARY TREATMENTS ON IRON OR STEEL |
| EN 12284:2003 | Refrigerating systems and heat pumps - Valves - Requirements, testing and marking |
| DIN EN ISO 4526:2004-09 | Metallic coatings - Electroplated coatings of nickel for engineering purposes (ISO 4526:2004); German version EN ISO 4526:2004 |
| I.S. EN 13611:2015/AC:2016 | SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
| DIN EN 15088:2006-03 | Aluminium and aluminium alloys - Structural products for construction works - Technical conditions for inspection and delivery; German version EN 15088:2005 |
| DIN EN ISO 4521:2009-01 | METALLIC AND OTHER INORGANIC COATINGS - ELECTRODEPOSITED SILVER AND SILVER ALLOY COATINGS FOR ENGINEERING PURPOSES - SPECIFICATION AND TEST METHODS |
| DIN EN 13920-12:2003-08 | ALUMINIUM AND ALUMINIUM ALLOYS - SCRAP - PART 12: TURNINGS CONSISTING OF ONE SINGLE ALLOY |
| DIN EN 15646:2009-07 | ELECTRODEPOSITED COATINGS - ELECTROPLATED COATINGS OF ALUMINIUM AND ALUMINIUM ALLOYS WITH SUPPLEMENTARY TREATMENT - REQUIREMENTS AND TEST METHODS |
| UNE-EN 14420-8:2014 | Hose fittings with clamp units - Part 8: Symmetrical half coupling (Guillemin system) |
| EN 1780-1:2002 | Aluminium and aluminium alloys - Designation of alloyed aluminium ingots for remelting, master alloys and castings - Part 1: Numerical designation system |
| EN 10002-1 : 2001 | METALLIC MATERIALS - TENSILE TESTING - PART 1: METHOD OF TEST AT AMBIENT TEMPERATURE |
| EN 1780-3:2002 | Aluminium and aluminium alloys - Designation of alloyed aluminium ingots for remelting, master alloys and castings - Part 3: Writing rules for chemical composition |
| EN ISO 8062-3 : 2007 COR 2009 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 3: GENERAL DIMENSIONAL AND GEOMETRICAL TOLERANCES AND MACHINING ALLOWANCES FOR CASTINGS |
| EN ISO 6506-1:2014 | Metallic materials - Brinell hardness test - Part 1: Test method (ISO 6506-1:2014) |
| ISO 6506-1:2014 | Metallic materials Brinell hardness test Part 1: Test method |
| EN 1676:2010 | Aluminium and aluminium alloys - Alloyed ingots for remelting - Specifications |
| EN 1780-2:2002 | Aluminium and aluminium alloys - Designation of alloyed aluminium ingots for remelting, master alloys and castings - Part 2: Chemical symbol based designation system |
| EN 601:2004 | Aluminium and aluminium alloys - Castings - Chemical composition of castings for use in contact with foodstuff |
| ISO 8062-3:2007 | Geometrical product specifications (GPS) — Dimensional and geometrical tolerances for moulded parts — Part 3: General dimensional and geometrical tolerances and machining allowances for castings |
| EN 12258-1:2012 | Aluminium and aluminium alloys - Terms and definitions - Part 1: General terms |
| EN 1559-1:2011 | Founding - Technical conditions of delivery - Part 1: General |
| EN 576:2003 | Aluminium and aluminium alloys - Unalloyed aluminium ingots for remelting - Specifications |
| EN 1559-4:2015 | Founding - Technical conditions of delivery - Part 4: Additional requirements for aluminium alloy castings |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.