Skip to content
Please enter a keyword to search

  • PD CEN ISO/TR 20172:2009

    View superseded by
    Superseded A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
    View superseded by

    Welding. Grouping systems for materials. European materials

    Available format(s):  Hardcopy, PDF

    Superseded date:  12-05-2021

    Language(s):  English

    Published date:  31-07-2009

    Publisher:  British Standards Institution

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    Foreword
    Introduction
    1 Scope
    2 International grouping system for European materials
      2.1 Types of steel in accordance with the grouping
          system of ISO/TR 15608:2005, Table 1
      2.2 Types of aluminium and aluminium alloy in accordance
          with the grouping system of ISO/TR 15608:2005,
          Table 2
      2.3 Types of copper and copper alloy in accordance with
          the grouping system of ISO/TR 15608:2005, Table 3
      2.4 Types of cast iron in accordance with the grouping
          system of ISO/TR 15608:2005, Table 7
      2.5 Types of cast iron in accordance with the grouping
          system of ISO/TR 15608:2005, Table 7, additional
    Bibliography

    Abstract - (Show below) - (Hide below)

    Provides a European grouping system for materials for welding purposes, classified in accordance with the grouping system of ISO/TR 15608.

    General Product Information - (Show below) - (Hide below)

    Committee WEE/36
    Document Type Standard
    Publisher British Standards Institution
    Status Superseded
    Superseded By
    Supersedes

    Standards Referencing This Book - (Show below) - (Hide below)

    EN 10208-2:2009 Steel pipes for pipelines for combustible fluids - Technical delivery conditions - Part 2: Pipes of requirement class B
    EN 1780-1:2002 Aluminium and aluminium alloys - Designation of alloyed aluminium ingots for remelting, master alloys and castings - Part 1: Numerical designation system
    ISO 9328-4:2011 Steel flat products for pressure purposes Technical delivery conditions Part 4: Nickel-alloy steels with specified low temperature properties
    EN 10120:2017 Steel sheet and strip for welded gas cylinders
    EN 10305-5:2016 Steel tubes for precision applications - Technical delivery conditions - Part 5: Welded cold sized square and rectangular tubes
    ISO 209:2007 Aluminium and aluminium alloys — Chemical composition
    EN 10277-5:2008 Bright steel products - Technical delivery conditions - Part 5: Steels for quenching and tempering
    ISO 4996:2014 Hot-rolled steel sheet of high yield stress structural quality
    EN 10025-4:2004 Hot rolled products of structural steels - Part 4: Technical delivery conditions for thermomechanical rolled weldable fine grain structural steels
    EN 10085:2001 Nitriding steels - Technical delivery conditions
    EN 1412:2016 Copper and copper alloys - European numbering system
    EN 10216-5:2013 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes
    EN 10305-3:2016 Steel tubes for precision applications - Technical delivery conditions - Part 3: Welded cold sized tubes
    EN 10213:2007+A1:2016 Steel castings for pressure purposes
    EN 573-2:1994 Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 2: Chemical symbol based designation system
    EN 10028-3:2017 Flat products made of steels for pressure purposes - Part 3: Weldable fine grain steels, normalized
    EN 10273:2016 Hot rolled weldable steel bars for pressure purposes with specified elevated temperature properties
    EN 10137-3 : 1995 PLATES AND WIDE FLATS MADE OF HIGH YIELD STRENGTH STRUCTURAL STEELS IN THE QUENCHED AND TEMPERED OR PRECIPITATION HARDENED CONDITIONS - DELIVERY CONDITIONS FOR PRECIPITATION HARDENED STEELS
    EN 10268:2006+A1:2013 COLD ROLLED STEEL FLAT PRODUCTS WITH HIGH YIELD STRENGTH FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS
    EN 10164:2004 Steel products with improved deformation properties perpendicular to the surface of the product - Technical delivery conditions
    EN 10305-6:2016 Steel tubes for precision applications - Technical delivery conditions - Part 6: Welded cold drawn tubes for hydraulic and pneumatic power systems
    EN 10028-6:2017 Flat products made of steels for pressure purposes - Part 6: Weldable fine grain steels, quenched and tempered
    ISO/TR 15608:2017 Welding Guidelines for a metallic materials grouping system
    ISO 10799:2001 Structural steels Cold-formed, welded, structural hollow sections Technical delivery requirements
    EN 1654:1997/AC:2003 COPPER AND COPPER ALLOYS - STRIP FOR SPRINGS AND CONNECTORS
    EN 1780-2:2002 Aluminium and aluminium alloys - Designation of alloyed aluminium ingots for remelting, master alloys and castings - Part 2: Chemical symbol based designation system
    EN 10149-2:2013 Hot rolled flat products made of high yield strength steels for cold forming - Part 2: Technical delivery conditions for thermomechanically rolled steels
    EN 10217-4:2002/A1:2005 WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 4: ELECTRIC WELDED NON-ALLOY STEEL TUBES WITH SPECIFIED LOW TEMPERATURE PROPERTIES
    EN 1562:2012 Founding - Malleable cast irons
    EN 10248-1:1995 Hot rolled sheet piling of non alloy steels - Part 1: Technical delivery conditions
    EN 1560:2011 Founding - Designation system for cast iron - Material symbols and material numbers
    EN 10277-2:2008 Bright steel products - Technical delivery conditions - Part 2: Steels for general engineering purposes
    ISO 4991:2015 Steel castings for pressure purposes
    EN 10216-2:2013 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties
    ISO 4978:1983 Flat rolled steel products for welded gas cylinders
    ISO 1052:1982 Steels for general engineering purposes
    EN 10210-1:2006 Hot finished structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions
    EN 10305-2:2016 Steel tubes for precision applications - Technical delivery conditions - Part 2: Welded cold drawn tubes
    ISO 9328-3:2011 Steel flat products for pressure purposes Technical delivery conditions Part 3: Weldable fine grain steels, normalized
    EN 10028-2:2017 Flat products made of steels for pressure purposes - Part 2: Non-alloy and alloy steels with specified elevated temperature properties
    EN 1653:1997/A1:2000 COPPER AND COPPER ALLOYS - PLATE, SHEET AND CIRCLES FOR BOILERS, PRESSURE VESSELS AND HOT WATER STORAGE UNITS
    EN 10305-1:2016 Steel tubes for precision applications - Technical delivery conditions - Part 1: Seamless cold drawn tubes
    PREN 12513 : DRAFT 2009 FOUNDING - ABRASION RESISTANT CAST IRONS
    ISO 4995:2014 Hot-rolled steel sheet of structural quality
    ISO 4952:2006 Structural steels with improved atmospheric corrosion resistance
    EN 10217-7:2014 Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes
    EN 10207:2017 Steels for simple pressure vessels - Technical delivery requirements for plates, strips and bars
    EN 10305-4:2016 Steel tubes for precision applications - Technical delivery conditions - Part 4: Seamless cold drawn tubes for hydraulic and pneumatic power systems
    EN 10028-5:2017 Flat products made of steels for pressure purposes - Part 5: Weldable fine grain steels, thermomechanically rolled
    EN 10219-1:2006 Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions
    EN 10222-3:2017 Steel forgings for pressure purposes - Part 3: Nickel steels with specified low temperature properties
    EN 1706:2010 Aluminium and aluminium alloys - Castings - Chemical composition and mechanical properties
    ISO 6930-1:2001 High yield strength steel plates and wide flats for cold forming Part 1: Delivery conditions for thermomechanically-rolled steels
    EN 10222-5:2017 Steel forgings for pressure purposes - Part 5: Martensitic, austenitic and austenitic-ferritic stainless steels
    EN 10296-2:2005/AC:2007 WELDED CIRCULAR STEEL TUBES FOR MECHANICAL AND GENERAL ENGINEERING PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: STAINLESS STEEL
    EN 10132-2:2000 Cold rolled narrow steel strip for heat treatment - Technical delivery conditions - Part 2: Case hardening steels
    ISO 9328-2:2011 Steel flat products for pressure purposes Technical delivery conditions Part 2: Non-alloy and alloy steels with specified elevated temperature properties
    EN 10217-2:2002/A1:2005 WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: ELECTRIC WELDED NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES
    EN 10250-2:1999 Open die steel forgings for general engineering purposes - Part 2: Non-alloy quality and special steels
    EN 10222-4:2017 Steel forgings for pressure purposes - Part 4: Weldable fine grain steels with high proof strength
    EN 10025-5:2004 Hot rolled products of structural steels - Part 5: Technical delivery conditions for structural steels with improved atmospheric corrosion resistance
    EN 10222-2:2017 Steel forgings for pressure purposes - Part 2: Ferritic and martensitic steels with specified elevated temperatures properties
    CEN ISO/TR 15608:2017 Welding - Guidelines for a metallic materials grouping system (ISO/TR 15608:2017)
    EN 10025-2:2004/AC:2005 HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON-ALLOY STRUCTURAL STEELS
    ISO 5952:2011 Continuously hot-rolled steel sheet of structural quality with improved atmospheric corrosion resistance
    EN 1563:2011 Founding - Spheroidal graphite cast irons
    EN 10224:2002/A1:2005 NON-ALLOY STEEL TUBES AND FITTINGS FOR THE CONVEYANCE OF WATER AND OTHER AQUEOUS LIQUIDS - TECHNICAL DELIVERY CONDITIONS
    EN 10217-3:2002/A1:2005 WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 3: ALLOY FINE GRAIN STEEL TUBES
    EN 10083-2:2006 Steels for quenching and tempering - Part 2: Technical delivery conditions for non alloy steels
    EN 10296-1:2003 Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 1: Non-alloy and alloy steel tubes
    ISO 9327-4:1999 Steel forgings and rolled or forged bars for pressure purposes — Technical delivery conditions — Part 4: Weldable fine grain steels with high proof strength
    EN 13674-1:2011+A1:2017 Railway applications - Track - Rail - Part 1: Vignole railway rails 46 kg/m and above
    EN 10025-6:2004+A1:2009 Hot rolled products of structural steels - Part 6: Technical delivery conditions for flat products of high yield strength structural steels in the quenched and tempered condition
    ISO 13976:2016 Hot-rolled steel sheet in coils of structural quality and heavy thickness
    EN 10225:2009 Weldable structural steels for fixed offshore structures - Technical delivery conditions
    ISO 630:1995 Structural steels Plates, wide flats, bars, sections and profiles
    EN 10297-1:2003 Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 1: Non-alloy and alloy steel tubes
    EN 10216-1:2013 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties
    EN 10216-4:2013 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 4: Non-alloy and alloy steel tubes with specified low temperature properties
    ISO 9327-5:1999 Steel forgings and rolled or forged bars for pressure purposes — Technical delivery conditions — Part 5: Stainless steels
    ISO 4950-2:1995 High yield strength flat steel products — Part 2: Products supplied in the normalized or controlled rolled condition
    ISO 9327-3:1999 Steel forgings and rolled or forged bars for pressure purposes — Technical delivery conditions — Part 3: Nickel steels with specified low temperature properties
    ISO 5951:2013 Hot-rolled steel sheet of higher yield strength with improved formability
    EN 10208-1:2009 Steel pipes for pipelines for combustible fluids - Technical delivery condi-tions - Part 1: Pipes of requirement class A
    ISO 4950-1:1995 High yield strength flat steel products — Part 1: General requirements
    EN 10028-4:2017 Flat products made of steels for pressure purposes - Part 4: Nickel alloy steels with specified low temperature properties
    ISO 9327-2:1999 Steel forgings and rolled or forged bars for pressure purposes — Technical delivery conditions — Part 2: Non-alloy and alloy (Mo, Cr and CrMo) steels with specified elevated temperature properties
    ISO 6316:2012 Hot-rolled steel strip of structural quality
    EN 10025-3:2004 Hot rolled products of structural steels - Part 3: Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels
    ISO 3522:2007 Aluminium and aluminium alloys Castings Chemical composition and mechanical properties
    EN 10083-3:2006/AC:2008 STEELS FOR QUENCHING AND TEMPERING - PART 3: TECHNICAL DELIVERY CONDITIONS FOR ALLOY STEELS
    ISO 630-2:2011 Structural steels Part 2: Technical delivery conditions for structural steels for general purposes
    EN 573-3:2013 Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 3: Chemical composition and form of products
    EN 573-1:2004 Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 1: Numerical designation system
    EN 10149-3:2013 Hot rolled flat products made of high yield strength steels for cold forming - Part 3: Technical delivery conditions for normalized or normalized rolled steels
    EN 1652:1997/AC:2003 COPPER AND COPPER ALLOYS - PLATE, SHEET, STRIP AND CIRCLES FOR GENERAL PURPOSES
    EN 10217-1:2002/A1:2005 WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - NON-ALLOY STEEL TUBES WITH SPECIFIED ROOM TEMPERATURE PROPERTIES
    EN 10217-5:2002/A1:2005 WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 5: SUBMERGED ARC WELDED NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES
    EN 10217-6:2002/A1:2005 WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 6: SUBMERGED ARC WELDED NON-ALLOY STEEL TUBES WITH SPECIFIED LOW TEMPERATURE PROPERTIES
    EN 1561:2011 Founding - Grey cast irons
    EN 10216-3:2013 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes
    EN 10255:2004+A1:2007 Non-Alloy steel tubes suitable for welding and threading - Technical delivery conditions
    EN 10088-1:2014 Stainless steels - Part 1: List of stainless steels
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective