EN 1829-1:2010
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
High pressure water jet machines - Safety requirements - Part 1: Machines
25-01-2021
27-01-2010
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 List of significant hazards
5 Safety requirements and/or measures
6 Verification of the safety requirements and/or measures
7 Information for use
Annex A (normative) - Noise test code
Annex ZA (informative) - Relationship between this European
Standard and the Essential Requirements of EU
Directive 2006/42/EC
Bibliography
This European Standard contains safety-related requirements for high pressure water jet machines with drives of all kinds (e.g. electric motor, internal combustion engine, air and hydraulic) in which pumps are used to generate pressure. This document deals with all significant hazards, hazardous situations and events arising during assembly, erection, operation and servicing relevant to high pressure water jet machines, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). All references to high pressure water jet machines within this document shall include machines for one or more of the following industrial applications:-cleaning;-surface preparation;-material removal;-readjustment of concrete;-cutting.This document applies to mobile and fixed high pressure water jet machines, in which the water pressure is generated by a pressure generator/pump and in which the maximum allowable working pressure is more than the upper limit fixed in the scope of EN 60335-2-79. NOTE 125 MPa (250 bar) is currently the upper limit for machines covered by EN 60335-2-79. NOTE 2In general the machines in the scope will not be in the scope of the Pressure Equipment Directive 97/23/EC. In some cases, specific parts may be in the scope of that directive, but their application is not dealt with in this document.This document does not apply to high pressure cleaners which are dealt with in EN 60335-2-54 and EN 60335-2-79.This document does not cover additional hazards due to the incorporation of high pressure water jet machines into other process-technology machines.This document does not cover specific hazards associated with explosive atmospheres, use on ships or ambient temperatures outside the range 5 °C to 40 °C.This document does not cover hazards associated with the drives or specific hazards due to any heat generation function. However the hazards due to high (...)
| Committee |
CEN/TC 197
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| I.S. EN 1829-1:2010 | Identical |
| UNE-EN 1829-1:2010 | Identical |
| SS-EN 1829-1:2010 | Identical |
| UNI EN 1829-1 : 2010 | Identical |
| NBN EN 1829-1 : 2010 | Identical |
| BS EN 1829-1:2010 | Identical |
| DIN EN 1829-1:2010-05 | Identical |
| PN EN 1829-1 : 2010 | Identical |
| NS EN 1829-1 : 2010 | Identical |
| SN EN 1829-1 : 2010 | Identical |
| NF EN 1829-1 : 2010 | Identical |
| NEN EN 1829-1 : 2010 | Identical |
| ONORM EN 1829-1 : 2010 | Identical |
| I.S. EN 60335-2-79:2012 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-79: PARTICULAR REQUIREMENTS FOR HIGH PRESSURE CLEANERS AND STEAM CLEANERS (IEC 60335-2-79:2012 (MOD)) |
| EN 12621:2006+A1:2010 | Machinery for the supply and circulation of coating materials under pressure - Safety requirements |
| EN 60335-2-79:2012 | Household and similar electrical appliances - Safety - Part 2-79: Particular requirements for high pressure cleaners and steam cleaners |
| BS EN 60335-2-79:2012 | Household and similar electrical appliances. Safety Particular requirements for high pressure cleaners and steam cleaners |
| 12/30249558 DC : 0 | BS EN 14654-1 - MANAGEMENT AND CONTROL OF OPERATIONAL ACTIVITIES IN DRAIN AND SEWER SYSTEMS OUTSIDE BUILDINGS - PART 1: CLEANING |
| DIN EN 12621:2011-07 | Machinery for the supply and circulation of coating materials under pressure - Safety requirements (includes Amendment A1:2010) |
| EN 14654-1:2014 | Management and control of operational activities in drain and sewer systems outside buildings - Part 1: Cleaning |
| I.S. EN 14654-1:2014 | MANAGEMENT AND CONTROL OF OPERATIONAL ACTIVITIES IN DRAIN AND SEWER SYSTEMS OUTSIDE BUILDINGS - PART 1: CLEANING |
| I.S. EN 1953:2013 | ATOMISING AND SPRAYING EQUIPMENT FOR COATING MATERIALS - SAFETY REQUIREMENTS |
| IEC 60335-2-79:2016 | Household and similar electrical appliances - Safety - Part 2-79: Particular requirements for high pressure cleaners and steam cleaners |
| 10/30216264 DC : 0 | BS EN 60335-2-79 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-79: PARTICULAR REQUIREMENTS FOR HIGH PRESSURE CLEANERS AND STEAM CLEANERS |
| UNI EN 14654-1 : 2014 | MANAGEMENT AND CONTROL OF OPERATIONAL ACTIVITIES IN DRAIN AND SEWER SYSTEMS OUTSIDE BUILDINGS - PART 1: CLEANING |
| PREN 14654-1 : DRAFT 2012 | MANAGEMENT AND CONTROL OF OPERATIONAL ACTIVITIES IN DRAIN AND SEWER SYSTEMS OUTSIDE BUILDINGS - PART 1: CLEANING |
| DIN EN 14654-1:2014-08 | Management and control of operational activities in drain and sewer systems outside buildings - Part 1: Cleaning |
| DIN EN 1953:2013-12 | ATOMISING AND SPRAYING EQUIPMENT FOR COATING MATERIALS - SAFETY REQUIREMENTS |
| UNI EN 1953 : 2013 | Atomising and spraying equipment for coating materials - Safety requirements |
| UNE-EN 60335-2-79:2013 | Household and similar electrical appliances - Safety - Part 2-79: Particular requirements for high pressure cleaners and steam cleaners |
| BS EN 14654-1:2014 | Management and control of operational activities in drain and sewer systems outside buildings Cleaning |
| BS EN 12621 : 2006 | MACHINERY FOR THE SUPPLY AND CIRCULATION OF COATING MATERIALS UNDER PRESSURE - SAFETY REQUIREMENTS |
| UNE-EN 14654-1:2015 | Management and control of operational activities in drain and sewer systems outside buildings - Part 1: Cleaning |
| EN 1953:2013 | Atomising and spraying equipment for coating materials - Safety requirements |
| 17/30354111 DC : 0 | BS EN 17106-2 - ROAD OPERATION MACHINERY - SAFETY - PART 2: REQUIREMENTS FOR ROAD SURFACE CLEANING MACHINES |
| BS EN 1953:2013 | Atomising and spraying equipment for coating materials. Safety requirements |
| ISO 7010:2011 | Graphical symbols Safety colours and safety signs Registered safety signs |
| ISO 4871:1996 | Acoustics — Declaration and verification of noise emission values of machinery and equipment |
| EN 12162:2001+A1:2009 | Liquid pumps - Safety requirements - Procedure for hydrostatic testing |
| ISO 3744:2010 | Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for an essentially free field over a reflecting plane |
| EN 1088:1995+A2:2008 | Safety of machinery - Interlocking devices associated with guards - Principles for design and selection |
| IEC 61310-2:2007 | Safety of machinery - Indication, marking and actuation - Part 2: Requirements for marking |
| EN 981:1996+A1:2008 | Safety of machinery - System of auditory and visual danger and information signals |
| ISO/TR 11688-1:1995 | Acoustics Recommended practice for the design of low-noise machinery and equipment Part 1: Planning |
| EN 61310-2:2008 | Safety of machinery - Indication, marking and actuation - Part 2: Requirements for marking |
| ISO 13732-1:2006 | Ergonomics of the thermal environment — Methods for the assessment of human responses to contact with surfaces — Part 1: Hot surfaces |
| EN 12723:2000 | Liquid pumps - General terms for pumps and installations - Definitions, quantities, letter symbols and units |
| IEC 60204-1:2016 | Safety of machinery - Electrical equipment of machines - Part 1: General requirements |
| EN 60335-2-79:2012 | Household and similar electrical appliances - Safety - Part 2-79: Particular requirements for high pressure cleaners and steam cleaners |
| EN 614-1:2006+A1:2009 | Safety of machinery - Ergonomic design principles - Part 1: Terminology and general principles |
| EN ISO 13857:2008 | Safety of machinery - Safety distances to prevent hazard zones being reached by upper and lower limbs (ISO 13857:2008) |
| EN ISO 11688-2:2000 | Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 2: Introduction to the physics of low-noise design (ISO/TR 11688-2:1998) |
| EN ISO 13732-1:2008 | Ergonomics of the thermal environment - Methods for the assessment of human responses to contact with surfaces - Part 1: Hot surfaces (ISO 13732-1:2006) |
| EN 809 : 1998 COR 2010 | PUMPS AND PUMP UNITS FOR LIQUIDS - COMMON SAFETY REQUIREMENTS |
| IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
| EN ISO 3744:2010 | Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for an essentially free field over a reflecting plane (ISO 3744:2010) |
| EN 953:1997+A1:2009 | Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards |
| ISO 12100-2:2003 | Safety of machinery Basic concepts, general principles for design Part 2: Technical principles |
| ISO 13857:2008 | Safety of machinery Safety distances to prevent hazard zones being reached by upper and lower limbs |
| ISO 11203:1995 | Acoustics — Noise emitted by machinery and equipment — Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level |
| IEC 60335-2-79:2016 | Household and similar electrical appliances - Safety - Part 2-79: Particular requirements for high pressure cleaners and steam cleaners |
| EN ISO 3743-1:2010 | Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for small movable sources in reverberant fields - Part 1: Comparison method for a hard-walled test room (ISO 3743-1:2010) |
| ISO 12100-1:2003 | Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology |
| EN ISO 13849-1:2015 | Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2015) |
| EN ISO 4871:2009 | Acoustics - Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996) |
| EN 60529:1991/AC:2016-12 | DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015) |
| IEC 60335-2-54:2008+AMD1:2015 CSV | Household and similar electrical appliances - Safety - Part 2-54:Particular requirements for surface-cleaning appliances for household use employing liquids or steam |
| EN 60335-2-54:2008/A1:2015 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-54: PARTICULAR REQUIREMENTS FOR SURFACE-CLEANING APPLIANCES FOR HOUSEHOLD USE EMPLOYING LIQUIDS OR STEAM (IEC 60335-2-54:2008/A1:2015) |
| EN ISO 11688-1:2009 | Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 1: Planning (ISO/TR 11688-1:1995) |
| ISO 13849-1:2015 | Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design |
| ISO/TR 11688-2:1998 | Acoustics Recommended practice for the design of low-noise machinery and equipment Part 2: Introduction to the physics of low-noise design |
| EN ISO 11203:2009 | Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level (ISO 11203:1995) |
| ISO 3743-1:2010 | Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for small movable sources in reverberant fields Part 1: Comparison method for a hard-walled test room |
| 1997/23/EC : 1997 | DIRECTIVE 97/23/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 29 MAY 1997 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES CONCERNING PRESSURE EQUIPMENT |
| EN 60204-1 : 2006 COR 2010 | SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.