Skip to content
Please enter a keyword to search

  • EN 1993-1-5:2006/A1:2017

    Current The latest, up-to-date edition.

    EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-5: PLATED STRUCTURAL ELEMENTS

    Available format(s): 

    Language(s): 

    Published date:  26-04-2017

    Publisher:  Comite Europeen de Normalisation

    Pure ENs are not available for sale, please purchase a suitable national adoption

    Sorry this product is not available in your region.

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    1 Introduction
       1.1 Scope
       1.2 Normative references
       1.3 Terms and definitions
       1.4 Symbols
    2 Basis of design and modelling
       2.1 General
       2.2 Effective width models for global analysis
       2.3 Plate buckling effects on uniform members
       2.4 Reduced stress method
       2.5 Non uniform members
       2.6 Members with corrugated webs
    3 Shear lag in member design
       3.1 General
       3.2 Effectives width for elastic shear lag
       3.3 Shear lag at the ultimate limit state
    4 Plate buckling effects due to direct stresses at the ultimate
       limit state
       4.1 General
       4.2 Resistance to direct stresses
       4.3 Effective cross section
       4.4 Plate elements without longitudinal stiffeners
       4.5 Stiffened plate elements with longitudinal stiffeners
       4.6 Verification
    5 Resistance to shear
       5.1 Basis
       5.2 Design resistance
       5.3 Contribution from the web
       5.4 Contribution from flanges
       5.5 Verification
    6 Resistance to transverse forces
       6.1 Basis
       6.2 Design resistance
       6.3 Length of stiff bearing
       6.4 Reduction factor CHI[F] for effective length for resistance
       6.5 Effective loaded length
       6.6 Verification
    7 Interaction
       7.1 Interaction between shear force, bending moment and axial
           force
       7.2 Interaction between transverse force, bending moment and
           axial force
    8 Flange induced buckling
    9 Stiffeners and detailing
       9.1 General
       9.2 Direct stresses
       9.3 Shear
       9.4 Transverse loads
    10 Reduced stress method
    Annex A (informative) Calculation of critical stresses for
                          stiffened plates
    Annex B (informative) Non uniform members
    Annex C (informative) Finite Element Methods of Analysis (FEM)
    Annex D (informative) Plate girders with corrugated webs
    Annex E (normative) Alternative methods for determining effective
                          cross sections

    Abstract - (Show below) - (Hide below)

    Provides design requirements of stiffened and unstiffened plates which are subject to inplane forces.

    General Product Information - (Show below) - (Hide below)

    Committee CEN/TC 250
    Development Note Supersedes ENV 1993-1-5. (12/2006)
    Document Type Standard
    Publisher Comite Europeen de Normalisation
    Status Current
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    UNE-EN 50341-1:2017 Overhead electrical lines exceeding AC 1 kV - Part 1: General requirements - Common specifications
    I.S. EN 1993-6:2007 EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 6: CRANE SUPPORTING STRUCTURES (INCLUDING IRISH NATIONAL ANNEX)
    BS EN 1090-5:2017 Execution of steel structures and aluminium structures Technical requirements for cold-formed structural aluminium elements and cold-formed structures for roof, ceiling, floor and wall applications
    UNE-EN 1993-1-7:2013 Eurocode 3 - Design of steel structures - Part 1-7: Plated structures subject to out of plane loading
    UNE-EN 1994-1-1:2013 Eurocode 4: Design of composite steel and concrete structures - Part 1-1: General rules and rules for buildings
    I.S. EN 1090-2:2008 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
    BS EN 50341-1:2012 Overhead electrical lines exceeding AC 1 kV General requirements. Common specifications
    BS EN 13001-3-1 : 2012 CRANES - GENERAL DESIGN - PART 3-1: LIMIT STATES AND PROOF COMPETENCE OF STEEL STRUCTURE
    UNI EN 13001-3-1 : 2013 CRANES - GENERAL DESIGN - PART 3-1: LIMIT STATES AND PROOF COMPETENCE OF STEEL STRUCTURE
    EN 1993-1-6:2007/A1:2017 EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-6: STRENGTH AND STABILITY OF SHELL STRUCTURES
    DIN EN 1994-1-1:2010-12 Eurocode 4: Design of composite steel and concrete structures - Part 1-1: General rules and rules for buildings (includes Corrigendum AC:2009)
    BS EN 1993-1-7:2007 Eurocode 3. Design of steel structures Plated structures subject to out of plane loading
    BS EN 1993-1-4 : 2006 EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-4: GENERAL RULES - SUPPLEMENTARY RULES FOR STAINLESS STEELS
    BS EN 1993-5:2007 Eurocode 3. Design of steel structures Piling
    DIN EN 1993-6:2010-12 Eurocode 3: Design of steel structures - Part 6: Crane supporting structures (includes Corrigendum AC:2009)
    DIN EN 1090-5:2017-07 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 5: TECHNICAL REQUIREMENTS FOR COLD-FORMED STRUCTURAL ALUMINIUM ELEMENTS AND COLD-FORMED STRUCTURES FOR ROOF, CEILING, FLOOR AND WALL APPLICATIONS
    EN 13001-3-1:2012+A2:2018 Cranes - General Design - Part 3-1: Limit States and proof competence of steel structure
    DIN EN 1090-2:2011-10 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
    DIN EN 1998-4:2007-01 Eurocode 8: Design of structures for earthquake resistance - Part 4: Silos, tanks and pipelines
    I.S. EN 1994-1-2:2005 EUROCODE 4 - DESIGN OF COMPOSITE STEEL AND CONCRETE STRUCTURES - PART 1-2: GENERAL RULES - STRUCTURAL FIRE DESIGN
    I.S. EN 1998-6:2005 EUROCODE 8: DESIGN OF STRUCTURES FOR EARTHQUAKE RESISTANCE - PART 6: TOWERS, MASTS AND CHIMNEYS
    I.S. EN 1993-5:2007 EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 5: PILING (INCLUDING IRISH NATIONAL ANNEX)
    UNE-EN 1090-2:2011 Execution of steel structures and aluminium structures - Part 2: Technical requirements for steel structures
    UNE-EN 1994-2:2013 Eurocode 4 - Design of composite steen and concrete structures - Part 2: General rules and rules for bridges
    I.S. EN 13001-3-1:2012 CRANES - GENERAL DESIGN - PART 3-1: LIMIT STATES AND PROOF COMPETENCE OF STEEL STRUCTURE
    I.S. EN 1993-1-6:2007 EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-6: STRENGTH AND STABILITY OF SHELL STRUCTURES
    UNI EN 1090-2 : 2011 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
    UNE-EN 1993-1-3:2012 Eurocode 3 - Design of steel structures - Part 1-3: General rules - Supplementary rules for cold-formed members and sheeting
    EN 50341-1:2012 Overhead electrical lines exceeding AC 1 kV - Part 1: General requirements - Common specifications
    DIN EN 1090-2:2015-07 (Draft) EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
    DIN EN 1993-1-3:2010-12 Eurocode 3: Design of steel structures - Part 1-3: General rules - Supplementary rules for cold-formed members and sheeting (includes Corrigendum AC:2009)
    I.S. EN 1993-1-4:2006 EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-4: GENERAL RULES - SUPPLEMENTARY RULES FOR STAINLESS STEELS (INCLUDING IRISH NATIONAL ANNEX)
    DIN EN 1993-1-6:2010-12 EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-6: STRENGTH AND STABILITY OF SHELL STRUCTURES
    I.S. EN 1994-2:2005 EUROCODE 4 - DESIGN OF COMPOSITE STEEL AND CONCRETE STRUCTURES - PART 2: GENERAL RULES AND RULES FOR BRIDGES (INCLUDING IRISH NATIONAL ANNEX)
    I.S. EN 1994-1-1:2005 EUROCODE 4: DESIGN OF COMPOSITE STEEL AND CONCRETE STRUCTURES - PART 1-1: GENERAL RULES AND RULES FOR BUILDINGS (INCLUDING IRISH NATIONAL ANNEX)
    DIN EN 13374:2013-07 TEMPORARY EDGE PROTECTION SYSTEMS - PRODUCT SPECIFICATION - TEST METHODS
    I.S. EN 1993-1-7:2007 EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-7: PLATED STRUCTURES SUBJECT TO OUT OF PLANE LOADING (INCLUDING IRISH NATIONAL ANNEX)
    UNI EN 1993-1-7 : 2007 EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-7: PLATED STRUCTURES SUBJECT TO OUT OF PLANE LOADING
    DIN EN 1090-5 E : 2017 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 5: TECHNICAL REQUIREMENTS FOR COLD-FORMED STRUCTURAL ALUMINIUM ELEMENTS AND COLD-FORMED STRUCTURES FOR ROOF, CEILING, FLOOR AND WALL APPLICATIONS
    DIN EN 13001-3-1:2013-12 CRANES - GENERAL DESIGN - PART 3-1: LIMIT STATES AND PROOF COMPETENCE OF STEEL STRUCTURE
    I.S. EN 50341-1:2012 OVERHEAD ELECTRICAL LINES EXCEEDING AC 1 KV - PART 1: GENERAL REQUIREMENTS - COMMON SPECIFICATIONS
    CEI EN 50341-1 : 2013 OVERHEAD ELECTRICAL LINES EXCEEDING AC 1 KV - PART 1: GENERAL REQUIREMENTS - COMMON SPECIFICATIONS
    PREN 1090-4 : DRAFT 2014 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 4: TECHNICAL REQUIREMENTS FOR THIN-GAUGE, COLD-FORMED STEEL ELEMENTS AND STRUCTURES FOR ROOF, CEILING, FLOOR AND WALL APPLICATIONS
    EN 1090-2:2008+A1:2011 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
    BS EN 1090-2 : 2008 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
    UNE-EN 13374:2013 Temporary edge protection systems - Product specification - Test methods
    EN 1993-1-4:2006/A1:2015 EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-4: GENERAL RULES - SUPPLEMENTARY RULES FOR STAINLESS STEELS
    DIN EN 1993-1-7:2010-12 Eurocode 3: Design of steel structures - Part 1-7: Plated structures subject to out of plane loading (includes Corrigendum AC:2009)
    DIN EN 1993-1-4:2015-10 EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 1-4: GENERAL RULES - SUPPLEMENTARY RULES FOR STAINLESS STEELS
    DIN EN 1994-2:2010-12 Eurocode 4: Design of composite steel and concrete structures - Part 2: General rules and rules for bridges (includes Corrigendum AC:2008)
    BS EN 1998-6:2005 Eurocode 8. Design of structures for earthquake resistance Towers, masts and chimneys
    BS EN 1993-1-3:2006 Eurocode 3. Design of steel structures General rules - Supplementary rules for cold-formed members and sheeting
    EN 1993-5:2007/AC:2009 EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 5: PILING
    UNI EN 1993-5 : 2007 EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 5: PILING
    UNI EN 13374 : 2013 TEMPORARY EDGE PROTECTION SYSTEMS - PRODUCT SPECIFICATION - TEST METHODS
    UNI EN 1994-2 : 2006 EUROCODE 4 - DESIGN OF COMPOSITE STEEL AND CONCRETE STRUCTURES - PART 2: GENERAL RULES AND RULES FOR BRIDGES
    UNI EN 1994-1-2 : 2014 EUROCODE 4 - DESIGN OF COMPOSITE STEEL AND CONCRETE STRUCTURES - PART 1-2: GENERAL RULES - STRUCTURAL FIRE DESIGN
    UNI EN 1993-6 : 2007 EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 6: CRANE SUPPORTING STRUCTURES
    UNI EN 1994-1-1 : 2005 EUROCODE 4 - DESIGN OF COMPOSITE STEEL AND CONCRETE STRUCTURES - PART 1-1: GENERAL RULES AND RULES FOR BUILDINGS
    I.S. EN 13374:2013 TEMPORARY EDGE PROTECTION SYSTEMS - PRODUCT SPECIFICATION - TEST METHODS
    12/30260570 DC : 0 BS EN 50341-1 - OVERHEAD ELECTRICAL LINES EXCEEDING AC 1 KV - PART 1: GENERAL REQUIREMENTS - COMMON SPECIFICATIONS
    I.S. EN 1998-4:2006 EUROCODE 8 - DESIGN OF STRUCTURES FOR EARTHQUAKE RESISTANCE - PART 4: SILOS, TANKS AND PIPELINES
    BS EN 1993-1-6 : 2007 EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-6: STRENGTH AND STABILITY OF SHELL STRUCTURES
    EN 13374:2013 TEMPORARY EDGE PROTECTION SYSTEMS - PRODUCT SPECIFICATION - TEST METHODS
    14/30297831 DC : 0 BS EN 1090-4 - EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 4: TECHNICAL REQUIREMENTS FOR THIN-GAUGE, COLD-FORMED STEEL ELEMENTS AND STRUCTURES FOR ROOF, CEILING, FLOOR AND WALL APPLICATIONS
    BS EN 1993-6:2007 Eurocode 3. Design of steel structures Crane supporting structures
    BS EN 1994-2:2005 Eurocode 4. Design of composite steel and concrete structures General rules and rules for bridges
    BS EN 13374 : 2013 TEMPORARY EDGE PROTECTION SYSTEMS - PRODUCT SPECIFICATION - TEST METHODS
    BS EN 1994-1-2 : 2005 EUROCODE 4 - DESIGN OF COMPOSITE STEEL AND CONCRETE STRUCTURES - PART 1-2: GENERAL RULES - STRUCTURAL FIRE DESIGN
    BS EN 1994-1-1:2004 Eurocode 4. Design of composite steel and concrete structures General rules and rules for buildings
    BS EN 1998-4:2006 Eurocode 8. Design of structures for earthquake resistance Silos, tanks and pipelines
    EN 1998-4:2006 Eurocode 8 - Design of structures for earthquake resistance - Part 4: Silos, tanks and pipelines
    EN 1994-1-1:2004/AC:2009 EUROCODE 4: DESIGN OF COMPOSITE STEEL AND CONCRETE STRUCTURES - PART 1-1: GENERAL RULES AND RULES FOR BUILDINGS
    EN 1994-2:2005/AC:2008 EUROCODE 4 - DESIGN OF COMPOSITE STEEL AND CONCRETE STRUCTURES - PART 2: GENERAL RULES AND RULES FOR BRIDGES
    EN 1993-1-3:2006/AC:2009 EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-3: GENERAL RULES - SUPPLEMENTARY RULES FOR COLD-FORMED MEMBERS AND SHEETING
    EN 1998-6:2005 Eurocode 8: Design of structures for earthquake resistance - Part 6: Towers, masts and chimneys
    EN 1993-1-7:2007/AC:2009 EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-7: PLATED STRUCTURES SUBJECT TO OUT OF PLANE LOADING
    EN 1993-6:2007/AC:2009 EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 6: CRANE SUPPORTING STRUCTURES
    EN 1994-1-2:2005/A1:2014 EUROCODE 4 - DESIGN OF COMPOSITE STEEL AND CONCRETE STRUCTURES - PART 1-2: GENERAL RULES - STRUCTURAL FIRE DESIGN
    PREN 50341-1 : DRAFT 2012 OVERHEAD ELECTRICAL LINES EXCEEDING AC 1 KV - PART 1: GENERAL REQUIREMENTS - COMMON SPECIFICATIONS
    I.S. EN 1993-1-3:2006 EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-3: GENERAL RULES - SUPPLEMENTARY RULES FOR COLD-FORMED MEMBERS AND SHEETING (INCLUDING IRISH NATIONAL ANNEX)
    PREN 12716 : DRAFT 2017 EXECUTION OF SPECIAL GEOTECHNICAL WORKS - JET GROUTING
    11/30250535 DC : DRAFT DEC 2011 BS EN 13374 - TEMPORARY EDGE PROTECTION SYSTEMS - PRODUCT SPECIFICATION - TEST METHODS
    UNE-EN 1993-1-4:2012 Eurocode 3 - Design of steel structures - Part 1-4: General rules - Supplementary rules for stainless steels
    UNE-EN 1993-1-6:2013 Eurocode 3 - Design of steel structures - Part 1-6: Strength and Stability of Shell Structures
    KTA 3205.2 : 2015 COR 2016 COMPONENT SUPPORT STRUCTURES WITH NON-INTEGRAL CONNECTIONS - PART 2: COMPONENT SUPPORT STRUCTURES WITH NON-INTEGRAL CONNECTIONS FOR PRESSURE AND ACTIVITY-RETAINING COMPONENTS IN SYSTEMS OUTSIDE THE PRIMARY CIRCUIT
    UNE-EN 1994-1-2:2016 Eurocode 4 - Design of composite steel and concrete structures - Part 1-2: General rules - Structural fire design.
    I.S. EN 1090-5:2017 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 5: TECHNICAL REQUIREMENTS FOR COLD-FORMED STRUCTURAL ALUMINIUM ELEMENTS AND COLD-FORMED STRUCTURES FOR ROOF, CEILING, FLOOR AND WALL APPLICATIONS
    17/30354260 DC : 0 BS EN 12716 - EXECUTION OF SPECIAL GEOTECHNICAL WORKS - JET GROUTING
    DIN EN 1994-1-2:2010-12 Eurocode 4: Design of composite steel and concrete structures - Part 1-2: General rules - Structural fire design (includes Corrigendum AC:2008)
    EN 1090-5:2017 Execution of steel structures and aluminium structures - Part 5: Technical requirements for cold-formed structural aluminium elements and cold-formed structures for roof, ceiling, floor and wall applications
    DIN EN 1998-6:2006-03 EUROCODE 8: DESIGN OF STRUCTURES FOR EARTHQUAKE RESISTANCE - PART 6: TOWERS, MASTS AND CHIMNEYS
    DIN EN 1993-5:2010-12 Eurocode 3: Design of steel structures - Part 5: Piling (includes Corrigendum AC:2009)

    Standards Referencing This Book - (Show below) - (Hide below)

    EN 1993-1-1:2005/A1:2014 EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 1-1: GENERAL RULES AND RULES FOR BUILDINGS
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective