• There are no items in your cart

EN 1993-5:2007/AC:2009

Current

Current

The latest, up-to-date edition.

EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 5: PILING

Published date

13-05-2009

Foreword
1 General
  1.1 Scope
  1.2 Normative references
  1.3 Assumptions
  1.4 Distinction between principles and application rules
  1.5 Definitions
  1.6 Symbols
  1.7 Units
  1.8 Terminology
  1.9 Convention for sheet pile axes
2 Basis of design
  2.1 General
  2.2 Ultimate limit state criteria
  2.3 Serviceability limit state criteria
  2.4 Site investigation and soil parameters
  2.5 Analysis
  2.6 Design assisted by testing
  2.7 Driveability
3 Material properties
  3.1 General
  3.2 Bearing piles
  3.3 Hot rolled steel sheet piles
  3.4 Cold formed steel sheet piles
  3.5 Sections used for waling and bracing
  3.6 Connecting devices
  3.7 Steel members used for anchors
  3.8 Steel members used for combined walls
  3.9 Fracture toughness
4 Durability
  4.1 General
  4.2 Durability requirements for bearing piles
  4.3 Durability requirements for sheet piling
  4.4 Corrosion rates for design
5 Ultimate limit states
  5.1 Basis
  5.2 Sheet piling
  5.3 Bearing piles
  5.4 High modulus walls
  5.5 Combined walls
6 Serviceability limit states
  6.1 Basis
  6.2 Displacements of retaining walls
  6.3 Displacements of bearing piles
  6.4 Structural aspects of steel sheet piling
7 Anchors, walings, bracing and connections
  7.1 General
  7.2 Anchorages
  7.3 Walings and bracing
  7.4 Connections
8 Execution
  8.1 General
  8.2 Steel sheet piling
  8.3 Bearing piles
  8.4 Anchorages
  8.5 Walings, bracings and connections
A [normative] - Thin walled steel sheet piling
  A.1 General
  A.2 Basis of design
  A.3 Properties of materials and cross-sections
  A.4 Local buckling
  A.5 Resistance of cross-sections
  A.6 Design by calculation
  A.7 Design assisted by testing
B [informative] - Testing of thin walled steel sheet piles
  B.1 General
  B.2 Single span beam test
  B.3 Intermediate support test
  B.4 Double span beam test
  B.5 Evaluation of test results
C [informative] - Guidance for the design of steel sheet piling
  C.1 Design of sheet pile cross section at ultimate limit state
  C.2 Serviceability limit state
D [informative] - Primary elements of combined walls
  D.1 I-sections used as primary elements
  D.2 Tubular piles used as primary elements

Describes principles and application rules for the structural design of bearing piles and sheet piles made of steel.

Committee
CEN/TC 250
DevelopmentNote
Supersedes ENV 1993-5. (04/2007)
DocumentType
Standard
PublisherName
Comite Europeen de Normalisation
Status
Current
Supersedes

16/30304669 DC : 0 BS EN ISO 22477-5 - GEOTECHNICAL INVESTIGATION AND TESTING - TESTING OF GEOTECHNICAL STRUCTURES - PART 5: TESTING OF GROUTED ANCHORS
PREN 14199 : DRAFT 2013 EXECUTION OF SPECIAL GEOTECHNICAL WORK - MICROPILES
13/30280743 DC : 0 BS EN 14199 - EXECUTION OF SPECIAL GEOTECHNICAL WORK - MICROPILES
EN 1993-1-6:2007/A1:2017 EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-6: STRENGTH AND STABILITY OF SHELL STRUCTURES
DIN EN 1537:2001-01 EXECUTION OF SPECIAL GEOTECHNICAL WORKS - GROUND ANCHORS
DIN EN 1090-2:2011-10 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
17/30298929 DC : DRAFT SEP 2017 BS EN ISO 19906 - PETROLEUM AND NATURAL GAS INDUSTRIES - ARCTIC OFFSHORE STRUCTURES
PREN 13107 : DRAFT 2013 SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - CIVIL ENGINEERING WORKS
UNE-EN 1090-2:2011 Execution of steel structures and aluminium structures - Part 2: Technical requirements for steel structures
I.S. EN 1993-1-6:2007 EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-6: STRENGTH AND STABILITY OF SHELL STRUCTURES
UNI EN 1090-2 : 2011 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
DIN EN 1090-2:2015-07 (Draft) EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
DIN EN 1537:2014-07 EXECUTION OF SPECIAL GEOTECHNICAL WORKS - GROUND ANCHORS
DIN EN 1993-1-6:2010-12 EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-6: STRENGTH AND STABILITY OF SHELL STRUCTURES
I.S. EN 1537:2013 EXECUTION OF SPECIAL GEOTECHNICAL WORKS - GROUND ANCHORS
DIN EN 13374:2013-07 TEMPORARY EDGE PROTECTION SYSTEMS - PRODUCT SPECIFICATION - TEST METHODS
13/30275585 DC : 0 BS EN 13107 - SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - CIVIL ENGINEERING WORKS
PREN 12699 : DRAFT 2013 EXECUTION OF SPECIAL GEOTECHNICAL WORK - DISPLACEMENT PILES
EN 1090-2:2008+A1:2011 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
BS EN 1090-2 : 2008 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
UNE-EN 13374:2013 Temporary edge protection systems - Product specification - Test methods
UNI EN 1537 : 2013 EXECUTION OF SPECIAL GEOTECHNICAL WORKS - GROUND ANCHORS
UNI EN 13374 : 2013 TEMPORARY EDGE PROTECTION SYSTEMS - PRODUCT SPECIFICATION - TEST METHODS
I.S. EN 13374:2013 TEMPORARY EDGE PROTECTION SYSTEMS - PRODUCT SPECIFICATION - TEST METHODS
11/30250535 DC : DRAFT DEC 2011 BS EN 13374 - TEMPORARY EDGE PROTECTION SYSTEMS - PRODUCT SPECIFICATION - TEST METHODS
BS EN 1993-1-6 : 2007 EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-6: STRENGTH AND STABILITY OF SHELL STRUCTURES
EN 13374:2013 TEMPORARY EDGE PROTECTION SYSTEMS - PRODUCT SPECIFICATION - TEST METHODS
IEC 60913:2013 Railway applications - Fixed installations - Electric traction overhead contact lines
BS EN 13374 : 2013 TEMPORARY EDGE PROTECTION SYSTEMS - PRODUCT SPECIFICATION - TEST METHODS
EN 1537:2013 Execution of special geotechnical works - Ground anchors
13/30280740 DC : 0 BS EN 12699 - EXECUTION OF SPECIAL GEOTECHNICAL WORK - DISPLACEMENT PILES
16/30332602 DC : DRAFT JAN 2016 BS EN 10219-3 - COLD FORMED WELDED STRUCTURAL STEEL HOLLOW SECTIONS - PART 3: TOLERANCES, DIMENSIONS AND SECTIONAL PROPERTIES
UNE-EN 1993-1-6:2013 Eurocode 3 - Design of steel structures - Part 1-6: Strength and Stability of Shell Structures
I.S. EN 1090-2:2008 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
BS EN 1537:2013 Execution of special geotechnical works. Ground anchors

EN 10045-2 : 1992 COR 1993 METALLIC MATERIALS - CHARPY IMPACT TEST - VERIFICATION OF THE TESTING MACHINE (PENDULUM IMPACT)
EN 10027-2:2015 DESIGNATION SYSTEMS FOR STEELS - PART 2: NUMERICAL SYSTEM
EN 1536:2010+A1:2015 Execution of special geotechnical work - Bored piles
EN 1993-1-5:2006/A1:2017 EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-5: PLATED STRUCTURAL ELEMENTS
EN 1992-3:2006 Eurocode 2 - Design of concrete structures - Part 3: Liquid retaining and containment structures
EN 10248-2:1995 Hot rolled sheet piling of non alloy steels - Part 2: Tolerances on shape and dimensions
EN 12063:1999 EXECUTION OF SPECIAL GEOTECHNICAL WORK - SHEET PILE WALLS
EN 1994-1-1:2004/AC:2009 EUROCODE 4: DESIGN OF COMPOSITE STEEL AND CONCRETE STRUCTURES - PART 1-1: GENERAL RULES AND RULES FOR BUILDINGS
EN 10248-1:1995 Hot rolled sheet piling of non alloy steels - Part 1: Technical delivery conditions
EN 1992-2:2005/AC:2008 EUROCODE 2 - DESIGN OF CONCRETE STRUCTURES - PART 2: CONCRETE BRIDGES - DESIGN AND DETAILING RULES
EN 10210-1:2006 Hot finished structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions
EN 10210-2:2006/AC:2007 HOT FINISHED STRUCTURAL HOLLOW SECTIONS OF NON-ALLOY AND FINE GRAIN STEELS - PART 2: TOLERANCES, DIMENSIONS AND SECTIONAL PROPERTIES
EN 10045-1 : 1990 METALLIC MATERIALS - CHARPY IMPACT TEST - PART 1: TEST METHOD
EN 1994-1-2:2005/A1:2014 EUROCODE 4 - DESIGN OF COMPOSITE STEEL AND CONCRETE STRUCTURES - PART 1-2: GENERAL RULES - STRUCTURAL FIRE DESIGN
EN 10219-1:2006 Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions
EN 1992-1-2:2004/AC:2008 EUROCODE 2: DESIGN OF CONCRETE STRUCTURES - PART 1-2: GENERAL RULES - STRUCTURAL FIRE DESIGN
EN 10027-1:2016 Designation systems for steels - Part 1: Steel names
EN 1993-1-3:2006/AC:2009 EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-3: GENERAL RULES - SUPPLEMENTARY RULES FOR COLD-FORMED MEMBERS AND SHEETING
ENV 1090-2 : DRAFT 1998 EXECUTION OF STEEL STRUCTURES - SUPPLEMENTARY RULES FOR COLD FORMED THIN GAUGE COMPONENTS AND SHEETING
EN 1993-1-9:2005/AC:2009 EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 1-9: FATIGUE
EN 10219-2:2006 Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 2: Tolerances, dimensions and sectional properties
EN 1997-1:2004/A1:2013 EUROCODE 7: GEOTECHNICAL DESIGN - PART 1: GENERAL RULES
EN 1994-2:2005/AC:2008 EUROCODE 4 - DESIGN OF COMPOSITE STEEL AND CONCRETE STRUCTURES - PART 2: GENERAL RULES AND RULES FOR BRIDGES
EN 14199:2015 Execution of special geotechnical works - Micropiles
EN 1992-1-1:2004/A1:2014 EUROCODE 2: DESIGN OF CONCRETE STRUCTURES - PART 1-1: GENERAL RULES AND RULES FOR BUILDINGS
EN 1993-1-2:2005/AC:2009 EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 1-2: GENERAL RULES - STRUCTURAL FIRE DESIGN
EN 1990:2002/A1:2005/AC:2010 EUROCODE - BASIS OF STRUCTURAL DESIGN
EN 1537:2013 Execution of special geotechnical works - Ground anchors
EN 10249-1:1995 Cold formed sheet piling of non alloy steels - Part 1: Technical delivery conditions
EN 1993-1-8:2005/AC:2009 EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 1-8: DESIGN OF JOINTS
EN 1993-1-10:2005/AC:2009 EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 1-10: MATERIAL TOUGHNESS AND THROUGH-THICKNESS PROPERTIES
EN 12699:2015 Execution of special geotechnical works - Displacement piles
EN 1993-1-11:2006/AC:2009 EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-11: DESIGN OF STRUCTURES WITH TENSION COMPONENTS
EN 1993-1-1:2005/A1:2014 EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 1-1: GENERAL RULES AND RULES FOR BUILDINGS
EN 10249-2:1995 Cold formed sheet piling of non alloy steels - Part 2: Tolerances on shape and dimensions

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.