• There are no items in your cart

DIN EN 1090-5 E : 2017

Superseded

Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 5: TECHNICAL REQUIREMENTS FOR COLD-FORMED STRUCTURAL ALUMINIUM ELEMENTS AND COLD-FORMED STRUCTURES FOR ROOF, CEILING, FLOOR AND WALL APPLICATIONS

Available format(s)

Hardcopy , PDF

Superseded date

30-06-2020

Language(s)

English

Published date

01-01-2017

National foreword
European foreword
1 Scope
2 Normative references
3 Terms, definitions, symbols and abbreviations
4 Specifications and documentation
5 Constituent products
6 Manufacturing
7 Welding at the construction site
8 Mechanical Fastening
9 Erection
10 Surface protection
11 Geometrical tolerances
12 Inspection, testing and correction
Annex A (normative) - Basic requirements for profiled
        sheeting
Annex B (normative) - Additional design requirements
        for profiled sheeting
Annex C (informative) - Documentation
Annex D (normative) - Geometrical tolerances
Annex E (normative) - Galvanic corrosion
Annex F (normative) - Additional information
Bibliography

Defines requirements for the execution i.e. the manufacture and the installation of cold-formed structural aluminium components made from profiled sheeting for roof, ceiling, floor and wall applications under predominately static loading conditions or seismic loading conditions and their documentation.

DevelopmentNote
Supersedes DIN 18807-9 E. (07/2017)
DocumentType
Standard
Pages
63
PublisherName
German Institute for Standardisation (Deutsches Institut für Normung)
Status
Superseded
SupersededBy
Supersedes

Standards Relationship
EN 1090-5:2017 Identical

EN 14783:2013 Fully supported metal sheet and strip for roofing, external cladding and internal lining - Product specification and requirements
EN ISO 376:2011 Metallic materials - Calibration of force-proving instruments used for the verification of uniaxial testing machines (ISO 376:2011)
EN 10162:2003 Cold rolled steel sections - Technical delivery conditions - Dimensional and cross-sectional tolerances
PREN 1090-4 : DRAFT 2014 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 4: TECHNICAL REQUIREMENTS FOR THIN-GAUGE, COLD-FORMED STEEL ELEMENTS AND STRUCTURES FOR ROOF, CEILING, FLOOR AND WALL APPLICATIONS
ISO 12944-6:1998 Paints and varnishes Corrosion protection of steel structures by protective paint systems Part 6: Laboratory performance test methods
ISO 354:2003 Acoustics — Measurement of sound absorption in a reverberation room
ISO 4042:1999 Fasteners Electroplated coatings
ISO 3506-1:2009 Mechanical properties of corrosion-resistant stainless steel fasteners Part 1: Bolts, screws and studs
EN 1991-1-6:2005/AC:2013 Eurocode 1 - Actions on structures Part 1-6: General actions - Actions during execution
EN ISO 4042:1999 FASTENERS - ELECTROPLATED COATINGS (ISO 4042:1999)
EN 10152:2017 Electrolytically zinc coated cold rolled steel flat products for cold forming - Technical delivery conditions
EN 13523-6:2002 Coil coated metals - Test methods - Part 6: Adhesion after indentation (cupping test)
EN ISO 3506-1:2009 Mechanical properties of corrosion-resistant stainless steel fasteners - Part 1: Bolts, screws and studs (ISO 3506-1:2009)
EN 1991-1-7:2006/A1:2014 EUROCODE 1 - ACTIONS ON STRUCTURES - PART 1-7: GENERAL ACTIONS - ACCIDENTAL ACTIONS
ISO 14713-1:2017 Zinc coatings — Guidelines and recommendations for the protection against corrosion of iron and steel in structures — Part 1: General principles of design and corrosion resistance
EN 1993-1-5:2006/A1:2017 EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-5: PLATED STRUCTURAL ELEMENTS
EN ISO 3506-3:2009 Mechanical properties of corrosion-resistant stainless steel fasteners - Part 3: Set screws and similar fasteners not under tensile stress (ISO 3506-3:2009)
ISO 6270-1:1998 Paints and varnishes Determination of resistance to humidity Part 1: Continuous condensation
EN 14782:2006 Self-supporting metal sheet for roofing, external cladding and internal lining - Product specification and requirements
ISO 2808:2007 Paints and varnishes Determination of film thickness
EN ISO 3506-4:2009 Mechanical properties of corrosion-resistant stainless steel fasteners - Part 4: Tapping screws (ISO 3506-4:2009)
EN 1999-1-1:2007/A2:2013 EUROCODE 9: DESIGN OF ALUMINIUM STRUCTURES - PART 1-1: GENERAL STRUCTURAL RULES
EN 1991-1-3:2003/A1:2015 EUROCODE 1 - ACTIONS ON STRUCTURES - PART 1-3: GENERAL ACTIONS - SNOW LOADS
EN 1999-1-4:2007/A1:2011 EUROCODE 9 - DESIGN OF ALUMINIUM STRUCTURES - PART 1-4: COLD-FORMED STRUCTURAL SHEETING
EN 508-2:2008 Roofing products from metal sheet - Specification for self-supporting products of steel, aluminium or stainless steel sheet - Part 2: Aluminium
EN 13501-5:2016 Fire classification of construction products and building elements - Part 5: Classification using data from external fire exposure to roofs tests
EN 1396:2015 Aluminium and aluminium alloys - Coil coated sheet and strip for general applications - Specifications
EN ISO 2409:2013 Paints and varnishes - Cross-cut test (ISO 2409:2013)
EN 1090-3:2008 Execution of steel structures and aluminium structures - Part 3: Technical requirements for aluminium structures
EN 12056-1:2000 Gravity drainage systems inside buildings - Part 1: General and performance requirements
EN ISO 9227:2017 Corrosion tests in artificial atmospheres - Salt spray tests (ISO 9227:2017)
ISO 2081:2008 Metallic and other inorganic coatings Electroplated coatings of zinc with supplementary treatments on iron or steel
EN 1090-1:2009+A1:2011 Execution of steel structures and aluminium structures - Part 1: Requirements for conformity assessment of structural components
EN ISO 17872:2007 Paints and varnishes - Guidelines for the introduction of scribe marks through coatings on metallic panels for corrosion testing (ISO 17872:2007)
ISO 11654:1997 Acoustics — Sound absorbers for use in buildings — Rating of sound absorption
EN 1991-1-2:2002/AC:2013 EUROCODE 1: ACTIONS ON STRUCTURES - PART 1-2: GENERAL ACTIONS - ACTIONS ON STRUCTURES EXPOSED TO FIRE
ISO 3506-3:2009 Mechanical properties of corrosion-resistant stainless steel fasteners Part 3: Set screws and similar fasteners not under tensile stress
EN 62305-3:2011 Protection against lightning - Part 3: Physical damage to structures and life hazard
ISO 3506-4:2009 Mechanical properties of corrosion-resistant stainless steel fasteners Part 4: Tapping screws
ISO 17872:2007 Paints and varnishes Guidelines for the introduction of scribe marks through coatings on metallic panels for corrosion testing
EN 1991-1-5:2003/AC:2009 EUROCODE 1: ACTIONS ON STRUCTURES - PART 1-5: GENERAL ACTIONS - THERMAL ACTIONS
EN 1993-1-4:2006/A1:2015 EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-4: GENERAL RULES - SUPPLEMENTARY RULES FOR STAINLESS STEELS
ISO 12944-2:2017 Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 2: Classification of environments
ISO 12944-1:2017 Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 1: General introduction
EN ISO 354:2003 Acoustics - Measurement of sound absorption in a reverberation room (ISO 354:2003)
EN 10143:2006 (edition 2) Continuously hot-dip coated steel sheet and strip - Tolerances on dimensions and shape
ISO 376:2011 Metallic materials — Calibration of force-proving instruments used for the verification of uniaxial testing machines
EN 1991-1-1:2002/AC:2009 EUROCODE 1: ACTIONS ON STRUCTURES - PART 1-1: GENERAL ACTIONS - DENSITIES, SELF-WEIGHT, IMPOSED LOADS FOR BUILDINGS
EN ISO 14713-1:2017 Zinc coatings - Guidelines and recommendations for the protection against corrosion of iron and steel in structures - Part 1: General principles of design and corrosion resistance (ISO 14713-1:2017)
EN 10204:2004 Metallic products - Types of inspection documents
ISO 12944-4:2017 Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 4: Types of surface and surface preparation
EN 13523-8:2017 Coil coated metals - Test methods - Part 8: Resistance to salt spray (fog)
CEN/TS 1187:2012 Test methods for external fire exposure to roofs
ISO 9227:2017 Corrosion tests in artificial atmospheres — Salt spray tests
EN 13523-7:2014 Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test)
EN 1993-1-3:2006/AC:2009 EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-3: GENERAL RULES - SUPPLEMENTARY RULES FOR COLD-FORMED MEMBERS AND SHEETING
EN 13523-1:2017 Coil coated metals - Test methods - Part 1: Film thickness
ISO 717-1:2013 Acoustics Rating of sound insulation in buildings and of building elements Part 1: Airborne sound insulation
EN 1999-1-2:2007/AC:2009 EUROCODE 9 - DESIGN OF ALUMINIUM STRUCTURES - PART 1-2: STRUCTURAL FIRE DESIGN
EN 12056-3:2000 Gravity drainage systems inside buildings - Part 3: Roof drainage, layout and calculation
ISO 2409:2013 Paints and varnishes Cross-cut test
EN 1998-1:2004/A1:2013 EUROCODE 8: DESIGN OF STRUCTURES FOR EARTHQUAKE RESISTANCE - PART 1: GENERAL RULES, SEISMIC ACTIONS AND RULES FOR BUILDINGS
EN 1990:2002/A1:2005/AC:2010 EUROCODE - BASIS OF STRUCTURAL DESIGN
EN 1991-1-4:2005/A1:2010 EUROCODE 1: ACTIONS ON STRUCTURES - PART 1-4: GENERAL ACTIONS - WIND ACTIONS
ISO 3506-2:2009 Mechanical properties of corrosion-resistant stainless steel fasteners Part 2: Nuts
EN ISO 11654:1997 Acoustics - Sound absorbers for use in buildings - Rating of sound absorption (ISO 11654:1997)
IEC 62305-3:2010 Protection against lightning - Part 3: Physical damage to structures and life hazard
ISO 12944-7:2017 Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 7: Execution and supervision of paint work
EN ISO 2808:2007 Paints and varnishes - Determination of film thickness (ISO 2808:2007)
EN 1993-1-1:2005/A1:2014 EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 1-1: GENERAL RULES AND RULES FOR BUILDINGS
EN ISO 3506-2:2009 Mechanical properties of corrosion-resistant stainless steel fasteners - Part 2: Nuts (ISO 3506-2:2009)

View more information
€154.95
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.