EN 312:2010
Current
Current
The latest, up-to-date edition.
Particleboards - Specifications
Published date
08-09-2010
Publisher
Sorry this product is not available in your region.
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Classifications
5 General requirements for all board types
6 Requirement values
7 Requirements for general purpose boards for use in dry
conditions (Type P1)
8 Requirements for boards for interior fitments (including
furniture) for use in dry conditions (Type P2)
9 Requirements for non load-bearing boards for use in humid
conditions (Type P3)
10 Requirements for load-bearing boards for use in dry
conditions (Type P4)
11 Requirements for load-bearing boards for use in humid
conditions (Type P5)
12 Requirements for heavy duty load-bearing boards for use
in dry conditions (Type P6)
13 Requirements for heavy duty load-bearing boards for use
in humid conditions (Type P7)
14 Supplementary properties
15 Verification of compliance
16 Marking
Annex A (normative) - Voluntary colour coding system for
particleboards
Bibliography
This European Standard specifies the requirements for flat-pressed or calendar-pressed unfaced particleboards as defined in EN 309.NOTE 1This standard is called up in EN 13986 for construction applications. Products specified in this standard are referred to in EN 13986 as resin-bonded particleboards.The values listed in this standard relate to product properties, but they are not characteristic values to be used in design calculations.NOTE 2Such characteristic values (e.g. for use in design calculation in EN 1995-1-1) are given either in EN 12369-1 or derived by testing according to EN 789, EN 1058 and ENV 1156.Additional information on supplementary properties for certain applications is also given.NOTE 3Particleboards in accordance with this standard may be referred to as P1 to P7-boards.Boards of type P4 to P7 are intended for use in design and construction of load-bearing or stiffening building elements, e.g. walls, flooring, roofing and I-beams (see EN 1995-1-1 and/or performance standards).This standard does not apply to extruded particleboards and flaxboards, which are standardised in EN 14755 and EN 15197 respectively.
| Committee |
CEN/TC 112
|
| DevelopmentNote |
Supersedes EN 312-1, EN 312-2, EN 312-3, EN 312-4, EN 312-5, EN 312-6 and EN 312-7. (01/2004) Supersedes PREN 312. (11/2010)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| DIN EN 312:2010-12 | Identical |
| UNE-EN 312:2010 | Identical |
| NF EN 312 : 2010 | Identical |
| BS EN 312:2010 | Identical |
| NS EN 312 : 1ED 2010 | Identical |
| SN EN 312 : 2010 | Identical |
| I.S. EN 312:2010 | Identical |
| NBN EN 312 : 2010 | Identical |
| NEN EN 312 : 2010 | Identical |
| PN EN 312 : 2011 | Identical |
| UNI EN 312 : 2010 | Identical |
| BS EN 50632-3-1:2016 | Electric motor-operated tools. Dust measurement procedure Particular requirements for transportable table saws |
| I.S. EN 492:2012 | Fibre-cement slates and fittings - Product specification and test methods |
| 11/30237554 DC : 0 | BS EN 14732 - TIMBER STRUCTURES - PREFABRICATED WALL, FLOOR AND ROOF ELEMENTS - REQUIREMENTS |
| DIN EN 14320-1:2013-04 | THERMAL INSULATING PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - IN-SITU FORMED SPRAYED RIGID POLYURETHANE (PUR) AND POLYISOCYANURATE (PIR) FOAM PRODUCTS - PART 1: SPECIFICATION FOR THE RIGID FOAM SPRAY SYSTEM BEFORE INSTALLATION |
| 10/30233182 DC : 0 | BS EN 492 - FIBRE-CEMENT SLATES AND FITTINGS - PRODUCT SPECIFICATION AND TEST METHODS |
| BS EN 50632-2-17:2016 | Electric motor-operated tools. Dust measurement procedure Particular requirements for routers and trimmers |
| BS EN 50632-2-19:2016 | Electric motor-operated tools. Dust measurement procedure Particular requirements for jointers |
| 15/30323610 DC : 0 | BS EN 50632-2-11 - ELECTRIC MOTOR-OPERATED TOOLS - DUST MEASUREMENT PROCEDURE - PART 2-11: PARTICULAR REQUIREMENTS FOR JIG AND SABRE SAWS |
| 04/30113290 DC : DRAFT MAY 2004 | EN 309 - PARTICLEBOARDS - DEFINITION AND CLASSIFICATION |
| S.R. CEN/TS 16368:2014 | LIGHTWEIGHT PARTICLEBOARDS - SPECIFICATIONS |
| 07/30167661 DC : DRAFT AUG 2007 | BS EN 15715 - THERMAL INSULATION PRODUCTS - INSTRUCTIONS FOR MOUNTING AND FIXING FOR REACTION TO FIRE TESTING - FACTORY MADE PRODUCTS |
| PREN 50632-2-11 : DRAFT 2015 | ELECTRIC MOTOR-OPERATED TOOLS - DUST MEASUREMENT PROCEDURE - PART 2-11: PARTICULAR REQUIREMENTS FOR JIG AND SABRE SAWS |
| PD CEN/TR 12872:2014 | Wood-based panels. Guidance on the use of load-bearing boards in floors, walls and roofs |
| CEI EN 50632-2-17 : 1ED 2017 | ELECTRIC MOTOR-OPERATED TOOLS - DUST MEASUREMENT PROCEDURE - PART 2-17: PARTICULAR REQUIREMENTS FOR ROUTERS AND TRIMMERS |
| PREN 12871 : DRAFT 2011 | WOOD-BASED PANELS - DETERMINATION OF PERFORMANCE CHARACTERISTICS FOR LOAD BEARING PANELS FOR USE IN FLOORS, ROOFS AND WALLS |
| I.S. EN 50632-2-5:2016 | ELECTRIC MOTOR-OPERATED TOOLS - DUST MEASUREMENT PROCEDURE - PART 2-5: PARTICULAR REQUIREMENTS FOR CIRCULAR SAWS |
| BS EN 15101-1:2013 | Thermal insulation products for buildings. In-situ formed loose fill cellulose (LFCI) products Specification for the products before installation |
| I.S. EN 14320-1:2013 | THERMAL INSULATING PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - IN-SITU FORMED SPRAYED RIGID POLYURETHANE (PUR) AND POLYISOCYANURATE FOAM (PIR) PRODUCTS - PART 1: SPECIFICATION FOR THE RIGID FOAM SPRAY SYSTEM BEFORE INSTALLATION |
| I.S. EN 15101-1:2013 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - IN-SITU FORMED LOOSE FILL CELLULOSE (LFCI) PRODUCTS - PART 1: SPECIFICATION FOR THE PRODUCTS BEFORE INSTALLATION |
| I.S. EN 14041:2018 | RESILIENT, TEXTILE, LAMINATE AND MODULAR MULTILAYER FLOOR COVERINGS - ESSENTIAL CHARACTERISTICS |
| I.S. EN 60745-2-11:2010 | HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 2-11: PARTICULAR REQUIREMENTS FOR RECIPROCATING SAWS (JIG AND SABRE SAWS) |
| BS EN 60745-2-11:2010 | Generic smart grid requirements Resources connected to the grid domains |
| CEI EN 50632-2-19 : 1ED 2017 | ELECTRIC MOTOR-OPERATED TOOLS - DUST MEASUREMENT PROCEDURE - PART 2-19: PARTICULAR REQUIREMENTS FOR JOINTERS |
| I.S. EN 50632-3-1:2016 | ELECTRIC MOTOR-OPERATED TOOLS - DUST MEASUREMENT PROCEDURE - PART 3-1: PARTICULAR REQUIREMENTS FOR TRANSPORTABLE TABLE SAWS |
| PREN 14974 : DRAFT 2016 | SKATEPARKS - SAFETY REQUIREMENTS AND TEST METHODS |
| UNI EN 15101-1 : 2013 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - IN-SITU FORMED LOOSE FILL CELLULOSE (LFCI) PRODUCTS - PART 1: SPECIFICATION FOR THE PRODUCTS BEFORE INSTALLATION |
| NF EN 14974 : 2006 + A1 2010 | FACILITIES FOR USERS OF ROLLER SPORTS EQUIPMENT - SAFETY REQUIREMENTS AND TEST METHODS |
| 16/30345765 DC : 0 | BS EN 14974 - SKATEPARKS - SAFETY REQUIREMENTS AND TEST METHODS |
| UNE-EN 14318-1:2013 | Thermal insulating products for buildings - In-situ formed dispensed rigid polyurethane (PUR) and polyisocyanurate (PIR) foam products - Part 1: Specification for the rigid foam dispensed system before installation |
| EN 15101-1:2013 | Thermal insulation products for buildings - In-situ formed loose fill cellulose (LFCI) products - Part 1: Specification for the products before installation |
| UNI EN 1457-1 : 2012 | CHIMNEYS - CLAY/CERAMIC FLUE LINERS - PART 1: FLUE LINERS OPERATING UNDER DRY CONDITIONS - REQUIREMENTS AND TEST METHODS |
| EN 50632-2-17:2016 | Electric motor-operated tools - Dust measurement procedure - Part 2-17: Particular requirements for routers and trimmers |
| EN 50632-3-1:2016 | Electric motor-operated tools - Dust measurement procedure - Part 3-1: Particular requirements for transportable table saws |
| EN 50632-2-5:2016 | Electric motor-operated tools - Dust measurement procedure - Part 2-5: Particular requirements for circular saws |
| BS EN 1995-1-1 : 2012 | EUROCODE 5: DESIGN OF TIMBER STRUCTURES - PART 1-1: GENERAL - COMMON RULES AND RULES FOR BUILDINGS |
| UNE-EN 13238:2011 | Reaction to fire tests for building products - Conditioning procedures and general rules for selection of substrates |
| BS EN 326-2 : 2010 | WOOD-BASED PANELS - SAMPLING, CUTTING AND INSPECTION - PART 2: INITIAL TYPE TESTING AND FACTORY PRODUCTION CONTROL |
| BS EN 295-7:2013 | Vitrified clay pipe systems for drains and sewers Requirements for pipes and joints for pipe jacking |
| BS EN 14964:2006 | Rigid underlays for discontinuous roofing. Definitions and characteristics |
| BS EN 13964:2014 | Suspended ceilings. Requirements and test methods |
| EN 13069:2005 | Chimneys - Clay/ceramic outer walls for system chimneys - Requirements and test methods |
| EN 50632-2-11:2016 | Electric motor-operated tools - Dust measurement procedure - Part 2-11: Particular requirements for jig and sabre saws |
| EN 13238:2010 | Reaction to fire tests for building products - Conditioning procedures and general rules for selection of substrates |
| CEN/TS 12872:2007 | Wood-based panels - Guidance on the use of load-bearing boards in floors, walls and roofs |
| CEN/TS 16526:2013 | Sandwich boards for furniture (SWB-F) - Factory made products - Definition, classification and test methods for determination of performance characteristics |
| EN 12871:2013 | Wood-based panels - Determination of performance characteristics for load bearing panels for use in floors, roofs and walls |
| CEN/TS 16368:2014 | Lightweight Particleboards - Specifications |
| 15/30328188 DC : 0 | BS EN 50632-3-1 - ELECTRIC MOTOR-OPERATED TOOLS - DUST MEASUREMENT PROCEDURE - PART 3-1: PARTICULAR REQUIREMENTS FOR TRANSPORTABLE TABLE SAWS |
| DD CEN/TS 12872:2007 | Wood-based panels. Guidance on the use of load-bearing boards in floors, walls and roofs |
| DIN EN 13381-1:2014-12 | TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 1: HORIZONTAL PROTECTIVE MEMBRANES |
| UNE-EN 1457-2:2013 | Chimneys - Clay/ceramic flue liners - Part 2: Flue liners operating under wet conditions - Requirements and test methods |
| BS EN 50632-2-11:2016 | Electric motor-operated tools. Dust measurement procedure Particular requirements for jig and sabre saws |
| BS EN 14320-1:2013 | Thermal insulating products for building equipment and industrial installations. In-situ formed sprayed rigid polyurethane (PUR) and polyisocyanurate foam (PIR) products Specification for the rigid foam spray system before installation |
| PREN 492 : DRAFT 2010 | FIBRE-CEMENT SLATES AND FITTINGS - PRODUCT SPECIFICATION AND TEST METHODS |
| NF EN 15715 : 2010 | THERMAL INSULATION PRODUCTS - INSTRUCTIONS FOR MOUNTING AND FIXING FOR REACTION TO FIRE TESTING - FACTORY MADE PRODUCTS |
| UNE-EN 492:2013 | Fibre-cement slates and fittings - Product specification and test methods |
| I.S. EN 14315-1:2013 | THERMAL INSULATING PRODUCTS FOR BUILDINGS - IN-SITU FORMED SPRAYED RIGID POLYURETHANE (PUR) AND POLYISOCYANURATE (PIR) FOAM PRODUCTS - PART 1: SPECIFICATION FOR THE RIGID FOAM SPRAY SYSTEM BEFORE INSTALLATION |
| I.S. EN 50632-2-17:2016 | ELECTRIC MOTOR-OPERATED TOOLS - DUST MEASUREMENT PROCEDURE - PART 2-17: PARTICULAR REQUIREMENTS FOR ROUTERS AND TRIMMERS |
| S.R. CEN/TR 12872:2014 | WOOD-BASED PANELS - GUIDANCE ON THE USE OF LOAD-BEARING BOARDS IN FLOORS, WALLS AND ROOFS |
| CEI EN 50632-3-1 : 1ED 2017 | ELECTRIC MOTOR-OPERATED TOOLS - DUST MEASUREMENT PROCEDURE - PART 3-1: PARTICULAR REQUIREMENTS FOR TRANSPORTABLE TABLE SAWS |
| I.S. EN 1457-2:2012 | CHIMNEYS - CLAY/CERAMIC FLUE LINERS - PART 2: FLUE LINERS OPERATING UNDER WET CONDITIONS - REQUIREMENTS AND TEST METHODS |
| UNE-EN 14974:2006 | Facilities for users of roller sports equipment - Safety requirements and test methods |
| DIN EN 15101-1:2013-12 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - IN-SITU FORMED LOOSE FILL CELLULOSE (LFCI) PRODUCTS - PART 1: SPECIFICATION FOR THE PRODUCTS BEFORE INSTALLATION |
| UNI EN 13381-1 : 2014 | TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 1: HORIZONTAL PROTECTIVE MEMBRANES |
| DIN EN 12871:2013-09 | Wood-based panels - Determination of performance characteristics for load bearing panels for use in floors, roofs and walls |
| DIN EN 13986:2015-06 | WOOD-BASED PANELS FOR USE IN CONSTRUCTION - CHARACTERISTICS, EVALUATION OF CONFORMITY AND MARKING |
| DIN EN 14964:2007-01 | RIGID UNDERLAYS FOR DISCONTINUOUS ROOFING - DEFINITIONS AND CHARACTERISTICS |
| DIN EN 326-2:2014-10 | Wood-based panels - Sampling, cutting and inspection - Part 2: Initial type testing and factory production control; German version EN 326-2:2010+A1:2014 |
| DIN EN 14322:2004-06 | WOOD-BASED PANELS - MELAMINE FACED BOARDS FOR INTERIOR USES - DEFINITION, REQUIREMENTS AND CLASSIFICATION |
| DIN EN 1995-1-1:2010-12 | Eurocode 5: Design of timber structures - Part 1-1: General - Common rules and rules for buildings (includes Corrigendum AC:2006 + Amendment A1:2008) |
| BS EN 12871:2013 | Wood-based panels. Determination of performance characteristics for load bearing panels for use in floors, roofs and walls |
| BS EN 438-2 : 2016 | HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 2: DETERMINATION OF PROPERTIES |
| I.S. EN 13238:2010 | REACTION TO FIRE TESTS FOR BUILDING PRODUCTS - CONDITIONING PROCEDURES AND GENERAL RULES FOR SELECTION OF SUBSTRATES |
| I.S. EN 1806:2006 | CHIMNEYS - CLAY/CERAMIC FLUE BLOCKS FOR SINGLE WALL CHIMNEYS - REQUIREMENTS AND TEST METHODS |
| I.S. EN 309:2005 | PARTICLEBOARDS - DEFINITION AND CLASSIFICATION |
| I.S. EN 13986:2004 | WOOD-BASED PANELS FOR USE IN CONSTRUCTION - CHARACTERISTICS, EVALUATION OF CONFORMITY AND MARKING |
| I.S. EN 295-7:2013 | VITRIFIED CLAY PIPE SYSTEMS FOR DRAINS AND SEWERS - PART 7: REQUIREMENTS FOR PIPES AND JOINTS FOR PIPE JACKING |
| I.S. EN 12871:2013 | WOOD-BASED PANELS - DETERMINATION OF PERFORMANCE CHARACTERISTICS FOR LOAD BEARING PANELS FOR USE IN FLOORS, ROOFS AND WALLS |
| S.R. CEN TS 14472-1:2003 | RESILIENT, TEXTILE AND LAMINATE FLOOR COVERINGS - DESIGN, PREPARATION AND INSTALLATION - PART 1: GENERAL |
| DIN EN 13238:2010-06 | Reaction to fire tests for building products - Conditioning procedures and general rules for selection of substrates |
| I.S. EN 13964:2014 | SUSPENDED CEILINGS - REQUIREMENTS AND TEST METHODS |
| DIN EN 13069:2005-12 | Chimneys - Clay/ceramic outer walls for system chimneys - Requirements and test methods |
| I.S. EN 14322:2017 | WOOD-BASED PANELS - MELAMINE FACED BOARDS FOR INTERIOR USES - DEFINITION, REQUIREMENTS AND CLASSIFICATION |
| I.S. EN 326-2:2010 | WOOD-BASED PANELS - SAMPLING, CUTTING AND INSPECTION - PART 2: INITIAL TYPE TESTING AND FACTORY PRODUCTION CONTROL |
| CEI EN 50632-2-11 : 1ED 2017 | ELECTRIC MOTOR-OPERATED TOOLS - DUST MEASUREMENT PROCEDURE - PART 2-11: PARTICULAR REQUIREMENTS FOR JIG AND SABRE SAWS |
| I.S. EN 50632-2-19:2016 | ELECTRIC MOTOR-OPERATED TOOLS - DUST MEASUREMENT PROCEDURE - PART 2-19: PARTICULAR REQUIREMENTS FOR JOINTERS |
| 11/30253904 DC : 0 | BS EN 12871 - WOOD-BASED PANELS - DETERMINATION OF PERFORMANCE CHARACTERISTICS FOR LOAD BEARING PANELS FOR USE IN FLOORS, ROOFS AND WALLS |
| UNE-EN 1457-1:2013 | Chimneys - Clay/ceramic flue liners - Part 1: Flue liners operating under dry conditions - Requirements and test methods |
| PD CEN/TS 16368:2014 | Lightweight Particleboards. Specifications |
| 12/30254092 DC : 0 | BS EN 16368 - LIGHTWEIGHT PARTICLEBOARDS - SPECIFICATIONS |
| UNI EN 14320-1 : 2013 | THERMAL INSULATING PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - IN-SITU FORMED SPRAYED RIGID POLYURETHANE (PUR) AND POLYISOCYANURATE FOAM (PIR) PRODUCTS - PART 1: SPECIFICATION FOR THE RIGID FOAM SPRAY SYSTEM BEFORE INSTALLATION |
| BS ISO 10840:2008 | Plastics. Guidance for the use of standard fire tests |
| 11/30252464 DC : 0 | BS EN 13381-1 - TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 1: HORIZONTAL PROTECTIVE MEMBRANES |
| I.S. EN 50632-2-11:2016 | ELECTRIC MOTOR-OPERATED TOOLS - DUST MEASUREMENT PROCEDURE - PART 2-11: PARTICULAR REQUIREMENTS FOR JIG AND SABRE SAWS |
| DIN EN 14315-1:2013-04 | THERMAL INSULATING PRODUCTS FOR BUILDINGS - IN-SITU FORMED SPRAYED RIGID POLYURETHANE (PUR) AND POLYISOCYANURATE (PIR) FOAM PRODUCTS - PART 1: SPECIFICATION FOR THE RIGID FOAM SPRAY SYSTEM BEFORE INSTALLATION |
| I.S. EN 1457-1:2012 | CHIMNEYS - CLAY/CERAMIC FLUE LINERS - PART 1: FLUE LINERS OPERATING UNDER DRY CONDITIONS - REQUIREMENTS AND TEST METHODS |
| 16/30338243 DC | BS EN 1457-2. Chimneys. Clay/ceramic flue liners. Part 2. Flue liners operating under wet conditions. Requirements and test methods |
| UNE-EN 14320-1:2013 | Thermal insulating products for building equipment and industrial installations - In-situ formed sprayed rigid polyurethane (PUR) and polyisocyanurate foam (PIR) products - Part 1: Specification for the rigid foam spray system before installation |
| PREN 14322 : DRAFT 2014 | WOOD-BASED PANELS - MELAMINE FACED BOARD FOR INTERIOR USES - DEFINITION, REQUIREMENTS AND CLASSIFICATION |
| S.R. CEN TS 12872:2007 | WOOD-BASED PANELS - GUIDANCE ON THE USE OF LOAD-BEARING BOARDS IN FLOORS, WALLS AND ROOFS |
| EN 438-2:2016 | High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 2: Determination of properties |
| PREN 13381-1 : DRAFT 2011 | TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 1: HORIZONTAL PROTECTIVE MEMBRANES |
| BS EN 492 : 2012 | FIBRE-CEMENT SLATES AND FITTINGS - PRODUCT SPECIFICATION AND TEST METHODS |
| S.R. CEN/TS 16526:2013 | SANDWICH BOARDS FOR FURNITURE (SWB-F) - FACTORY MADE PRODUCTS - DEFINITION, CLASSIFICATION AND TEST METHODS FOR DETERMINATION OF PERFORMANCE CHARACTERISTICS |
| DIN EN 1457-2:2016-10 (Draft) | Chimneys - Clay/ceramic flue liners - Part 2: Flue liners operating under wet conditions - Requirements and test methods; German and English version prEN 1457-2:2016 |
| UNI EN 14319-1 : 2013 | THERMAL INSULATING PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - IN-SITU FORMED DISPENSED RIGID POLYURETHANE (PUR) AND POLYISOCYANURATE FOAM (PIR) PRODUCTS - PART 1: SPECIFICATION FOR THE RIGID FOAM DISPENSED SYSTEM BEFORE INSTALLATION |
| PREN 17101 : DRAFT 2017 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - PU ADHESIVE FOAM FOR EXTERNAL THERMAL INSULATION COMPOSITE SYSTEMS (ETICS) |
| DIN EN 438-2:2016-06 | HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 2: DETERMINATION OF PROPERTIES |
| UNI CEN/TS 16368 : 2014 | LIGHTWEIGHT PARTICLEBOARDS - SPECIFICATIONS |
| UNI EN 1457-2 : 2012 | CHIMNEYS - CLAY/CERAMIC FLUE LINERS - PART 2: FLUE LINERS OPERATING UNDER WET CONDITIONS - REQUIREMENTS AND TEST METHODS |
| DIN EN 295-7:2013-05 | VITRIFIED CLAY PIPE SYSTEMS FOR DRAINS AND SEWERS - PART 7: REQUIREMENTS FOR PIPES AND JOINTS FOR PIPE JACKING |
| DIN EN 13964:2014-08 | SUSPENDED CEILINGS - REQUIREMENTS AND TEST METHODS |
| BS EN 13069:2005 | Chimneys. Clay/ceramic outer walls for system chimneys. Requirements and test methods |
| BS EN 335-3:1996 | Hazard classes of wood and wood-based products against biological attack Application to wood-based panels |
| EN 13381-1:2014 | Test methods for determining the contribution to the fire resistance of structural members - Part 1: Horizontal protective membranes |
| EN 14964:2006 | Rigid underlays for discontinuous roofing - Definitions and characteristics |
| EN 13986:2004 | Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking |
| EN 13986:2004+A1:2015 | Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking |
| EN 13964:2014 | Suspended ceilings - Requirements and test methods |
| UNI EN 326-2 : 2014 | WOOD-BASED PANELS - SAMPLING, CUTTING AND INSPECTION - PART 2: INITIAL TYPE TESTING AND FACTORY PRODUCTION CONTROL |
| UNI CEN/TS 16526 : 2014 | SANDWICH BOARDS FOR FURNITURE (SWB-F) - FACTORY MADE PRODUCTS - DEFINITION, CLASSIFICATION AND TEST METHODS FOR DETERMINATION OF PERFORMANCE CHARACTERISTICS |
| UNI EN 13964 : 2014 | SUSPENDED CEILINGS - REQUIREMENTS AND TEST METHODS |
| UNI EN 12871 : 2013 | WOOD-BASED PANELS - DETERMINATION OF PERFORMANCE CHARACTERISTICS FOR LOAD BEARING PANELS FOR USE IN FLOORS, ROOFS AND WALLS |
| UNI EN 13238 : 2010 | REACTION TO FIRE TESTS FOR BUILDING PRODUCTS - CONDITIONING PROCEDURES AND GENERAL RULES FOR SELECTION OF SUBSTRATES |
| UNI EN 1995-1-1 : 2014 | EUROCODE 5 - DESIGN OF TIMBER STRUCTURES - PART 1-1: GENERAL - COMMON RULES AND RULES FOR BUILDINGS |
| EN 14974:2006+A1:2010 | Facilities for users of roller sports equipment - Safety requirements and test methods |
| 04/30111056 DC : DRAFT MARCH 2004 | EN 1806 - CHIMNEYS - CLAY/CERAMIC FLUE BLOCKS FOR SINGLE WALL CHIMNEYS - REQUIREMENTS AND TEST METHODS |
| I.S. EN 1995-1-1:2005 | EUROCODE 5: DESIGN OF TIMBER STRUCTURES - PART 1-1: GENERAL - COMMON RULES AND RULES FOR BUILDINGS |
| 14/30303732 DC : 0 | BS EN 14322 - WOOD-BASED PANELS - MELAMINE FACED BOARD FOR INTERIOR USES - DEFINITION, REQUIREMENTS AND CLASSIFICATION |
| BS EN 14319-1:2013 | Thermal insulating products for building equipment and industrial installations. In-situ formed dispensed rigid polyurethane (PUR) and polyisocyanurate foam (PIR) products Specification for the rigid foam dispensed system before installation |
| UNI EN 14315-1 : 2013 | THERMAL INSULATING PRODUCTS FOR BUILDINGS - IN-SITU FORMED SPRAYED RIGID POLYURETHANE (PUR) AND POLYISOCYANURATE (PIR) FOAM PRODUCTS - PART 1: SPECIFICATION FOR THE RIGID FOAM SPRAY SYSTEM BEFORE INSTALLATION |
| UNI EN 14318-1 : 2013 | THERMAL INSULATING PRODUCTS FOR BUILDINGS - IN-SITU FORMED DISPENSED RIGID POLYURETHANE (PUR) AND POLYISOCYANURATE (PIR) FOAM PRODUCTS - PART 1: SPECIFICATION FOR THE RIGID FOAM DISPENSED SYSTEM BEFORE INSTALLATION |
| PREN 295-7 : DRAFT 2010 | VITRIFIED CLAY PIPE SYSTEMS FOR DRAINS AND SEWERS - PART 7: REQUIREMENTS FOR PIPES AND JOINTS FOR PIPE JACKING |
| 09/30203166 DC : 0 | BS EN 60745-2-11:2003/FP - HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 2-11: PARTICULAR REQUIREMENTS FOR RECIPROCATING SAWS (JIG AND SABRE SAWS) |
| PD CEN/TS 16526:2013 | Sandwich boards for furniture (SWB-F). Factory made products. Definition, classification and test methods for determination of performance characteristics |
| BS EN 14318-1:2013 | Thermal insulating products for buildings. In-situ formed dispensed rigid polyurethane (PUR) and polyisocyanurate (PIR) foam products Specification for the rigid foam dispensed system before installation |
| BS EN 13381-1:2014 | Test methods for determining the contribution to the fire resistance of structural members Horizontal protective membranes |
| BS EN 50632-2-5:2016 | Electric motor-operated tools. Dust measurement procedure Particular requirements for circular saws |
| 15/30323616 DC : 0 | BS EN 50632-2-17 - ELECTRIC MOTOR-OPERATED TOOLS - DUST MEASUREMENT PROCEDURE - PART 2-17: PARTICULAR REQUIREMENTS FOR ROUTERS AND TRIMMERS |
| BS EN 1457-2:2012 | Chimneys. Clay/ceramic flue liners Flue liners operating under wet conditions. Requirements and test methods |
| DD ENV 13381-7:2002 | Test methods for determining the contribution to the fire resistance of structural members Applied protection to timber members |
| 10/30217002 DC : 0 | BS EN 295-7 - VITRIFIED CLAY PIPE SYSTEMS FOR DRAINS AND SEWERS - PART 7: REQUIREMENTS FOR PIPES AND JOINTS FOR PIPE JACKING |
| UNE-EN 438-2:2016 | High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (Usually called Laminates) - Part 2: Determination of properties |
| 16/30338240 DC | BS EN 1457-1. Chimney. Clay/ceramic flue liners. Part 1. Flue liners operating under dry conditions. Requirements and test methods |
| NF EN 60745 2-11 : 2010 | HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 2-11: PARTICULAR REQUIREMENTS FOR RECIPROCATING SAWS (JIG AND SABRE SAWS) |
| I.S. EN 13381-1:2014 | TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 1: HORIZONTAL PROTECTIVE MEMBRANES |
| BS EN 14974 : 2006 | FACILITIES FOR USERS OF ROLLER SPORTS EQUIPMENT - SAFETY REQUIREMENTS AND TEST METHODS |
| I.S. EN 438-2:2016 | HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 2: DETERMINATION OF PROPERTIES |
| PREN 50632-2-5 : DRAFT 2015 | ELECTRIC MOTOR-OPERATED TOOLS - DUST MEASUREMENT PROCEDURE - PART 2-5: PARTICULAR REQUIREMENTS FOR CIRCULAR SAWS |
| ISO 10840:2008 | Plastics — Guidance for the use of standard fire tests |
| PREN 50632-3-1 : DRAFT 2015 | ELECTRIC MOTOR-OPERATED TOOLS - DUST MEASUREMENT PROCEDURE - PART 3-1: PARTICULAR REQUIREMENTS FOR TRANSPORTABLE TABLE SAWS |
| I.S. ENV 13381-7:2002 | TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 7: APPLIED PROTECTION TO TIMBER MEMBERS |
| EN 492:2012+A2:2018 | Fibre-cement slates and fittings - Product specification and test methods |
| EN 50632-2-19:2016 | Electric motor-operated tools - Dust measurement procedure - Part 2-19: Particular requirements for jointers |
| UNE-EN 12871:2013 | Wood-based panels - Determination of performance characteristics for load bearing panels for use in floors, roofs and walls |
| BS EN 1806:2006 | Chimneys Clay/ceramic flue blocks for single wall chimneys Requirements and test methods |
| BS EN 14322:2017 | Wood-based panels. Melamine faced board for interior uses. Definition, requirements and classification |
| UNE-EN 1995-1-1:2016 | Eurocode 5: Design of timber structures - Part 1-1: General - Common rules and rules for buildings. |
| BS EN 309:2005 | Particleboards. Definition and classification |
| UNE-EN 13986:2006 | Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking |
| UNE-EN 295-7:2013 | Vitrified clay pipe systems for drains and sewers - Part 7: Requirements for pipes and joints for pipe jacking |
| EN 14319-1:2013 | Thermal insulating products for building equipment and industrial installations - In-situ formed dispensed rigid polyurethane (PUR) and polyisocyanurate foam (PIR) products - Part 1: Specification for the rigid foam dispensed system before installation |
| EN 295-7:2013 | Vitrified clay pipe systems for drains and sewers - Part 7: Requirements for pipes and joints for pipe jacking |
| EN 14320-1:2013 | Thermal insulating products for building equipment and industrial installations - In-situ formed sprayed rigid polyurethane (PUR) and polyisocyanurate foam (PIR) products - Part 1: Specification for the rigid foam spray system before installation |
| EN 1457-1:2012 | Chimneys - Clay/ceramic flue liners - Part 1: Flue liners operating under dry conditions - Requirements and test methods |
| EN 326-2:2010+A1:2014 | Wood-based panels - Sampling, cutting and inspection - Part 2: Initial type testing and factory production control |
| EN 14315-1:2013 | Thermal insulating products for buildings - In-situ formed sprayed rigid polyurethane (PUR) and polyisocyanurate (PIR) foam products - Part 1: Specification for the rigid foam spray system before installation |
| EN 309:2005 | Particleboards - Definition and classification |
| EN 1457-2:2012 | Chimneys - Clay/ceramic flue liners - Part 2: Flue liners operating under wet conditions - Requirements and test methods |
| EN 14318-1:2013 | Thermal insulating products for buildings - In-situ formed dispensed rigid polyurethane (PUR) and polyisocyanurate (PIR) foam products - Part 1: Specification for the rigid foam dispensed system before installation |
| EN 1806:2006 | Chimneys - Clay/ceramic flue blocks for single wall chimneys - Requirements and test methods |
| 08/30186620 DC : DRAFT OCT 2008 | BS EN 13381-7 - TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 7: APPLIED PROTECTION TO TIMBER MEMBERS |
| DIN EN 14318-1:2013-04 | THERMAL INSULATING PRODUCTS FOR BUILDINGS - IN-SITU FORMED DISPENSED RIGID POLYURETHANE (PUR) AND POLYISOCYANURATE (PIR) FOAM PRODUCTS - PART 1: SPECIFICATION FOR THE RIGID FOAM DISPENSED SYSTEM BEFORE INSTALLATION |
| 15/30323619 DC : 0 | BS EN 50632-2-19 - ELECTRIC MOTOR-OPERATED TOOLS - DUST MEASUREMENT PROCEDURE - PART 2-19: PARTICULAR REQUIREMENTS FOR JOINTERS |
| 12/30266868 DC : 0 | BS EN 16481 - TIMBER STAIRS - STRUCTURAL DESIGN - CALCULATION METHOD |
| DIN EN 14319-1:2013-04 | Thermal insulating products for building equipment and industrial installations - In-situ formed dispensed rigid polyurethane (PUR) and polyisocyanurate (PIR) foam products - Part 1: Specification for the rigid foam dispensed system before installation |
| 13/30217369 DC : 0 | BS EN 13964 - SUSPENDED CEILINGS - REQUIREMENTS AND TEST METHODS |
| UNE-EN 14319-1:2013 | Thermal insulating products for building equipment and industrial installations - In-situ formed dispensed rigid polyurethane (PUR) and polyisocyanurate foam (PIR) products - Part 1: Specification for the rigid foam dispensed system before installation |
| BS EN 14315-1:2013 | Thermal insulating products for buildings. In-situ formed sprayed rigid polyurethane (PUR) and polyisocyanurate (PIR) foam products Specification for the rigid foam spray system before installation |
| 04/30048871 DC : DRAFT MAY 2004 | BS EN 14964 - ROOF COVERING PRODUCTS FOR DISCONTINUOUS LAYING AND PRODUCTS FOR WALL CLADDING - RIGID UNDERLAYS FOR DISCONTINUOUS ROOFING - DEFINITIONS AND CHARACTERISTICS |
| PREN 50632-2-17 : DRAFT 2015 | ELECTRIC MOTOR-OPERATED TOOLS - DUST MEASUREMENT PROCEDURE - PART 2-17: PARTICULAR REQUIREMENTS FOR ROUTERS AND TRIMMERS |
| UNE-EN 60745-2-11:2011 | Hand-held motor-operated electric tools - Safety - Part 2-11: Particular requirements for reciprocating saws (jig and sabre saws) |
| I.S. EN 14319-1:2013 | THERMAL INSULATING PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - IN-SITU FORMED DISPENSED RIGID POLYURETHANE (PUR) AND POLYISOCYANURATE FOAM (PIR) PRODUCTS - PART 1: SPECIFICATION FOR THE RIGID FOAM DISPENSED SYSTEM BEFORE INSTALLATION |
| 15/30323607 DC : 0 | BS EN 50632-2-5 - ELECTRIC MOTOR-OPERATED TOOLS - DUST MEASUREMENT PROCEDURE - PART 2-5: PARTICULAR REQUIREMENTS FOR CIRCULAR SAWS |
| BS EN 1457-1:2012 | Chimneys. Clay/ceramic flue liners Flue liners operating under dry conditions. Requirements and test methods |
| 08/30171383 DC : DRAFT JUNE 2008 | BS EN 12871 - WOOD-BASED PANELS - PERFORMANCE SPECIFICATIONS AND REQUIREMENTS FOR LOAD BEARING BOARDS FOR USE IN FLOORS, WALLS AND ROOFS |
| CEI EN 50632-2-5 : 1ED 2017 | ELECTRIC MOTOR-OPERATED TOOLS - DUST MEASUREMENT PROCEDURE - PART 2-5: PARTICULAR REQUIREMENTS FOR CIRCULAR SAWS |
| ENV 13381-7:2002 | Test methods for determining the contribution to the fire resistance of structural members - Part 7: Applied protection to timber members |
| UNE-EN 14315-1:2013 | Thermal insulating products for buildings. In-situ formed sprayed rigid polyurethane foam (PUR) products. Part 1: Specification for the rigid foam spray system before installation |
| UNE-EN 15101-1:2015 | Thermal insulation products for buildings - In-situ formed loose fill cellulose (LFCI) products - Part 1: Specification for the products before installation |
| PREN 13964 : DRAFT 2013 | SUSPENDED CEILINGS - REQUIREMENTS AND TEST METHODS |
| UNE-EN 13381-1:2016 | Test methods for determining the contribution to the fire resistance of structural members - Part 1: Horizontal protective membranes |
| I.S. EN 14318-1:2013 | THERMAL INSULATING PRODUCTS FOR BUILDINGS - IN-SITU FORMED DISPENSED RIGID POLYURETHANE (PUR) AND POLYISOCYANURATE (PIR) FOAM PRODUCTS - PART 1: SPECIFICATION FOR THE RIGID FOAM DISPENSED SYSTEM BEFORE INSTALLATION |
| ISO 4586-2:2015 | High-pressure decorative laminates (HPL, HPDL) Sheets based on thermosetting resins (Usually called Laminates) Part 2: Determination of properties |
| PREN 50632-2-19 : DRAFT 2015 | ELECTRIC MOTOR-OPERATED TOOLS - DUST MEASUREMENT PROCEDURE - PART 2-19: PARTICULAR REQUIREMENTS FOR JOINTERS |
| DIN EN 1457-1:2016-10 (Draft) | Chimney - Clay/ceramic flue liners - Part 1: Flue liners operating under dry conditions - Requirements and test methods; German and English version prEN 1457-1:2016 |
| UNI EN 14974 : 2010 | FACILITIES FOR USERS OF ROLLER SPORTS EQUIPMENT - SAFETY REQUIREMENTS AND TEST METHODS |
| 17/30353772 DC : 0 | BS EN 17101 - THERMAL INSULATION PRODUCTS FOR BUILDINGS - PU ADHESIVE FOAM FOR EXTERNAL THERMAL INSULATION COMPOSITE SYSTEMS (ETICS) |
| I.S. EN 14974:2006 | FACILITIES FOR USERS OF ROLLER SPORTS EQUIPMENT - SAFETY REQUIREMENTS AND TEST METHODS |
| UNE-EN 13964:2016 | Suspended ceilings - Requirements and test methods |
| BS EN 13986 : 2004 | WOOD-BASED PANELS FOR USE IN CONSTRUCTION - CHARACTERISTICS, EVALUATION OF CONFORMITY AND MARKING |
| UNE-EN 14322:2017 | Wood-based panels - Melamine faced board for interior uses - Definition, requirements and classification |
| BS EN 13238:2010 | Reaction to fire tests for building products. Conditioning procedures and general rules for selection of substrates |
| DIN EN 14974:2010-12 | FACILITIES FOR USERS OF ROLLER SPORTS EQUIPMENT - SAFETY REQUIREMENTS AND TEST METHODS |
| CEN/TS 14472-1:2003 | Resilient, textile and laminate floor coverings - Design, preparation and installation - Part 1: General |
| DIN EN 326-2:2000-10 | WOOD-BASED PANELS - SAMPLING, CUTTING AND INSPECTION - PART 2: INITIAL TYPE TESTING AND FACTORY PRODUCTION CONTROL |
| EN 60745-2-11:2010 | Hand-held motor-operated electric tools - Safety - Part 2-11: Particular requirements for reciprocating saws (jig and sabre saws) |
| DIN EN 309:2005-04 | Particleboards - Definition and classification; German version EN 309:2005 |
| DIN EN 1457-1:2012-04 | Chimneys - Clay/ceramic flue liners - Part 1: Flue liners operating under dry conditions - Requirements and test methods |
| DIN EN 1457-2:2012-04 | Chimneys - Clay/ceramic flue liners - Part 2: Flue liners operating under wet conditions - Requirements and test methods |
| CEN/TR 12872:2014 | Wood-based panels - Guidance on the use of load-bearing boards in floors, walls and roofs |
| EN 14322:2017 | Wood-based panels - Melamine faced board for interior uses - Definition, requirements and classification |
| UNE-EN 13986:2006+A1:2015 | Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking |
| EN 326-3:2003 | Wood-based panels - Sampling, cutting and inspection - Part 3: Inspection of an isolated lot of panels |
| EN 321:2001 | Wood-based panels - Determination of moisture resistance under cyclic test conditions |
| EN 319:1993 | Particleboards and fibreboards - Determination of tensile strength perpendicular to the plane of the board |
| EN 120:1992 | Wood based panels - Determination of formaldehyde content - Extraction method called the perforator method |
| EN 13986:2004 | Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking |
| EN 310:1993 | Wood-based panels - Determination of modulus of elasticity in bending and of bending strength |
| EN 1087-1:1995 | Particleboards - Determination of moisture resistance - Part 1: Boil test |
| EN 326-1:1994 | Wood-based panels - Sampling, cutting and inspection - Part 1: Sampling and cutting of test pieces and expression of test results |
| EN 322:1993 | Wood-based panels - Determination of moisture content |
| EN 14755:2005 | Extruded particleboards - Specifications |
| EN 326-2:2010+A1:2014 | Wood-based panels - Sampling, cutting and inspection - Part 2: Initial type testing and factory production control |
| 89/106/EEC : 1988 | COUNCIL DIRECTIVE OF 21 DECEMBER 1988 ON THE APPROXIMATION OF LAWS, REGULATIONS AND ADMINISTRATIVE PROVISIONS OF THE MEMBER STATES RELATING TO CONSTRUCTION PRODUCTS |
| EN 324-1:1993 | Wood-based panels - Determination of dimensions of boards - Part 1: Determination of thickness, width and length |
| ENV 1156:1998 | Wood-based panels - Determination of duration of load and creep factors |
| EN 317:1993 | Particleboards and fibreboards - Determination of swelling in thickness after immersion in water |
| EN 1058:2009 | Wood-based panels - Determination of characteristic 5-percentile values and characteristic mean values |
| EN 717-1:2004 | Wood-based panels - Determination of formaldehyde release - Part 1: Formaldehyde emission by the chamber method |
| EN 789:2004 | Timber structures - Test methods - Determination of mechanical properties of wood based panels |
| EN 324-2:1993 | Wood-based panels - Determination of dimensions of boards - Part 2: Determination of squareness and edge straightness |
| EN 323:1993 | Wood-based panels - Determination of density |
| EN 12369-1:2001 | Wood-based panels - Characteristic values for structural design - Part 1: OSB, particleboards and fibreboards |
| EN 15197:2007 | Wood-based panels - Flaxboards - Specifications |
| EN 318:2002 | Wood based panels - Determination of dimensional changes associated with changes in relative humidity |
| EN 335-3:1995 | Durability of wood and wood-based products - Definition of hazard classes of biological attack - Part 3: Application to wood-based panels |
| EN 12871:2013 | Wood-based panels - Determination of performance characteristics for load bearing panels for use in floors, roofs and walls |
| EN 309:2005 | Particleboards - Definition and classification |
| EN 311:2002 | Wood-based panels - Surface soundness - Test method |
| ISO 3340:1976 | Fibre building boards — Determination of sand content |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.