EN 419-1:2009

Foreword
1 Scope
2 Normative references
3 Terms and definitions
  3.1 Appliance and its constituent parts
  3.2 Adjusting, control and safety devices
  3.3 Operation of the appliance
      3.3.1 Heat input
  3.4 Gases
  3.5 Conditions of operation and measurement
  3.6 Country of destination
4 Classification of appliances
  4.1 Classification of gases according to the nature of
      the gases used (categories)
  4.2 Classification according to the gases capable of
      being used
  4.3 Classification according to the mode of evacuation
      of the combustion products
5 Constructional requirements
  5.1 General
  5.2 Requirements for adjusting, control and safety devices
  5.3 Ignition devices
  5.4 Main burner
  5.5 Pressure test points
  5.6 Injectors
6 Operational requirements
  6.1 Soundness of the gas circuit
  6.2 Heat inputs
  6.3 Limiting temperatures
  6.4 Ignition, cross-lighting and flame stability
  6.5 Flame supervision devices
  6.6 Pressure regulator
  6.7 Combustion
  6.8 Prolonged performance
  6.9 Measurement of oxides of Nitrogen, NO[x]
7 Test methods
  7.1 General
  7.2 Safety of operation
  7.3 Other pollutants
8 Marking and instructions
  8.1 Marking of the appliance and the packaging
  8.2 Instructions
  8.3 Presentation
Annex A (informative) - National situations
      A.1 General
      A.2 Categories listed in the body of the standard and
          marketed in different countries
      A.3 Appliance supply pressures corresponding to the
          categories given in A.2
      A.4 Special categories marketed nationally or locally
      A.5 Test gases corresponding to the special categories
          given in A.4
      A.6 Gas connections in the various countries
Annex B (informative) - Equivalence rules
      B.1 Conversion to categories within a restricted
          Wobbe index range
      B.2 Conversion to categories within an identical
          Wobbe index range
      B.3 Conversion to categories within a wider Wobbe
          index range
Annex C (informative) - Identification of the types of gas
        in use in the various countries
Annex D (normative) - Special national conditions
      D.1 General
      D.2 Belgium
      D.3 Italy
Annex E (informative) - Example of calculation of the weighting
        factors for an appliance with several rates
      E.1 Appliance rates
      E.2 Weighting of Q[pi,%] = 20
      E.3 Weighting of Q[pi,%] = 40
      E.4 Weighting of Q[pi,%] = 60
      E.5 Weighting of Q[pi,%] = 70
      E.6 Total weighting
Annex F (informative) - Calculation of conversions of NO[x]
      F.1 NO[x] emission conversion factors
      F.2 NO[x] conversion calculation
Annex G (informative) - National situations of countries whose
        national bodies are CEN associate members
Annex ZA (informative) - Clauses of this European Standard
         addressing essential requirements or other
         provisions of EU Directives
Bibliography

This European Standard specifies the requirements and test methods for the construction, safety, classification and marking of non-domestic gas-fired overhead luminous radiant heaters for environmental comfort, incorporating an atmospheric burner system referred to in the body of the text as “appliances”.This European Standard is applicable to Type A1 appliances only (see 4.3).This European Standard is not applicable to:a)appliances designed for use in domestic dwellings;b)outdoor appliances;c)appliances of heat input in excess of 120 kW (based on the net calorific value of the appropriate reference gas);d)appliances having fully pre-mixed gas and air burners in which:1)either the gas and all the combustion air are brought together just before the level of the combustion zone; or2)the pre-mixing of the gas and all combustion air is carried out in a part of the burner upstream of the combustion zone;e)appliances in which the supply of combustion air and/or the removal of the products of combustion is achieved by integral mechanical means.This standard is applicable to appliances which are intended to be type tested. Requirements for appliances which are not intended to be type tested would need to be subject to further consideration.Requirements concerning the rational use of energy have not been included in this European Standard.