EN 439 : 1994
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
WELDING CONSUMABLES - SHIELDING GASES FOR ARC WELDING AND CUTTING
Superseded date
01-03-2008
Superseded by
Published date
12-01-2013
Publisher
Sorry this product is not available in your region.
Cooperating organizations
National foreword
Foreword
1. Scope
2. Properties of gases
3. Classification of shielding gases
4. Designation
5. Tolerances of mixtures
6. Purities and dew point
7. Forms of supply
7.1 Gas cylinders
7.2 Liquid
8. Shielding gas identification
National annex NA (informative)
Committees responsible
Classifies shielding gases in accordance to their chemical properties as a base for the approval of shielding gas and filler wire combinations. Also specifies gas purities and mixing tolerances. Coverage includes: designation, gas cylinders, forms of supply, and purities and dew point.
| Committee |
TC 121
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| NBN EN 288-9 : 1999 | Identical |
| UNI EN 439 : 1996 | Identical |
| NBN EN 439 : 1994 | Identical |
| I.S. EN 439:1995 | Identical |
| PN EN 439 : 1999 | Identical |
| UNE-EN 439:1995 | Identical |
| NBN EN 288-5 : 1994 | Identical |
| SN EN 439 : 1994 | Identical |
| NF EN 439 : 1994 | Identical |
| NEN EN 439 : 94 C1 1995 | Identical |
| ISO 14175:2008 | Identical |
| BS EN 439:1994 | Identical |
| NS EN 439 : 1ED 1994 | Identical |
| DIN EN 439:1995-05 | Identical |
| DIN 32526:1978-08 | Similar to |
| BIS IS 16002-2 : 2012 | WELDING - TEST FOR SHOP PRIMERS IN RELATION TO WELDING AND ALLIED PROCESSES - PART 2: WELDING PROPERTIES OF SHOP PRIMERS |
| I.S. EN 12073:2000 | WELDING CONSUMABLES - TUBULAR CORED ELECTRODES FOR METAL ARC WELDING WITH OR WITHOUT A GAS SHIELD OF STAINLESS AND HEAT-RESISTING STEELS - CLASSIFICATION |
| UNI EN 4632-003 : 2011 | AEROSPACE SERIES - WELDABILITY AND BRAZEABILITY OF MATERIALS IN AEROSPACE CONSTRUCTIONS - PART 003: WELDING AND BRAZING OF HOMOGENEOUS ASSEMBLIES OF UNALLOYED AND LOW ALLOY STEELS |
| 09/30211880 DC : 0 | BS EN 12732 - GAS INFRASTRUCTURE - WELDING STEEL PIPEWORK - FUNCTIONAL REQUIREMENTS |
| DD ENV 1999-1.1 : DRAFT DEC 2000 | EUROCODE 9: DESIGN OF ALUMINIUM STRUCTURES - PART 101: GENERAL RULES - GENERAL RULES AND RULES FOR BUILDINGS |
| I.S. EN 1011-3:2000 | WELDING - RECOMMENDATIONS FOR WELDING OF METALLIC MATERIALS - PART 3: ARC WELDING OF STAINLESS STEELS |
| PREN 4632-003 : DRAFT 2008 | AEROSPACE SERIES - WELDABILITY AND BRAZEABILITY OF MATERIALS IN AEROSPACE CONSTRUCTIONS - PART 003: HOMOGENEOUS ASSEMBLIES OF UNALLOYED AND LOW ALLOY STEELS |
| I.S. EN ISO 15609-1:2004 | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE SPECIFICATION - PART 1: ARC WELDING |
| UNI EN ISO 15609-1 : 2006 | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE SPECIFICATION - PART 1: ARC WELDING |
| DIN EN 1011-5:2003-10 | WELDING - RECOMMENDATIONS FOR WELDING OF METALLIC MATERIALS - PART 5: WELDING OF CLAD STEEL |
| DIN EN 14532-1:2005-02 | WELDING CONSUMABLES - TEST METHODS AND QUALITY REQUIREMENTS - PART 1: PRIMARY METHODS AND CONFORMITY ASSESSMENT OF CONSUMABLES FOR STEEL, NICKEL AND NICKEL ALLOYS |
| BS EN ISO 17652-4:2003 | Welding. Test for shop primers in relation to welding and allied processes Emission of fumes and gases |
| BS EN ISO 15614-5:2004 | Specification and qualification of welding procedures for metallic materials. Welding procedure test Arc welding of titanium, zirconium and their alloys |
| BS EN ISO 9956-11:1997 | Specification and approval of welding procedures for metallic materials Welding procedure specification for laser beam welding |
| EN 1011-5:2003 | Welding - Recommendations for welding of metallic materials - Part 5: Welding of clad steel |
| DIN EN ISO 17652-4:2003-07 | WELDING - TEST FOR SHOP PRIMERS IN RELATION TO WELDING AND ALLIED PROCESSES - PART 4: EMISSION OF FUMES AND GASES |
| EN 12071 : 1999 | WELDING CONSUMABLES - TUBULAR CORED ELECTRODES FOR GAS SHIELDED METAL ARC WELDING OF CREEP-RESISTING STEELS - CLASSIFICATION |
| EN 12535 : 2000 | WELDING CONSUMABLES - TUBULAR CORED ELECTRODES FOR GAS SHIELDED METAL ARC WELDING OF HIGH STRENGTH STEELS - CLASSIFICATION |
| EN 12073 : 1999 | WELDING CONSUMABLES - TUBULAR CORED ELECTRODES FOR METAL ARC WELDING WITH OR WITHOUT A GAS SHIELD OF STAINLESS AND HEAT-RESISTING STEELS - CLASSIFICATION |
| EN 12534 : 1999 | WELDING CONSUMABLES - WIRE ELECTRODES, WIRES, RODS AND DEPOSITS FOR GAS SHIELDED METAL ARC WELDING OF HIGH STRENGTH STEELS - CLASSIFICATION |
| CEN/TR 15481:2006 | Welding of reinforcing steel - Tack weldability - Test methods and performance requirements |
| I.S. EN 12071:1999 | WELDING CONSUMABLES - TUBULAR CORED ELECTRODES FOR GAS SHIELDED METAL ARC WELDING OF CREEP-RESISTING STEELS - CLASSIFICATION |
| PREN 12732 : DRAFT 2009 | GAS INFRASTRUCTURE - WELDING STEEL PIPEWORK - FUNCTIONAL REQUIREMENTS |
| I.S. CEN/TR 15481:2006 | WELDING OF REINFORCING STEEL - TACK WELDABILITY - TEST METHODS AND PERFORMANCE REQUIREMENTS |
| DIN EN 1011-6:2006-03 | WELDING - RECOMMENDATION FOR WELDING OF METALLIC MATERIALS - PART 6: LASER BEAM WELDING |
| BS EN 14532-1:2004 | Welding consumables. Test methods and quality requirements Primary methods and conformity assessment of consumables for steel, nickel and nickel alloys |
| BS EN 1011-5:2003 | Welding. Recommendations for welding of metallic materials Welding of clad steel |
| DIN EN ISO 9956-11:1996-11 | SPECIFICATION AND APPROVAL OF WELDING PROCEDURES FOR METALLIC MATERIALS - PART 11: WELDING PROCEDURE SPECIFICATION FOR LASER BEAM WELDING |
| NFL 06 380-21 : 2003 | AEROSPACE SERIES - WELDED AND BRAZED ASSEMBLIES FOR AEROSPACE CONSTRUCTIONS - WELDABILITY AND BRAZEABILITY OF MATERIALS - PART 21: HOMOGENEOUS ASSEMBLIES OF UNALLOYED AND LOW ALLOY STEELS |
| BS EN 4632-003:2010 | Aerospace series. Weldability and brazeability of materials in aerospace constructions Welding and brazing of homogeneous assemblies of unalloyed and low alloy steels |
| 95/713574 DC : DRAFT OCT 1995 | PREN 288-13 - SPECIFICATION AND APPROVAL OF WELDING PROCEDURES FOR METALLIC MATERIALS - PART 13: WELDING PROCEDURE TESTS FOR THE ARC WELDING OF ALUMINIUM AND COMBINATIONS OF CAST TO WROUGHT MATERIAL |
| 00/708222 DC : DRAFT MAY 2000 | BS EN ISO 15614-1 SPECIFICATION AND APPROVAL OF WELDING PROCEDURES FOR METALLIC MATERIALS -WELDING PROCEDURE TEST - PART 1: ARC AND GAS WELDING OF STEELS AND ARC WELDING OF NICKEL AND NICKEL ALLOYS |
| 07/30158903 DC : 0 | BS EN 1011-1 - WELDING - RECOMMENDATIONS FOR WELDING OF METALLIC MATERIALS - PART 1: GENERAL GUIDANCE FOR ARC WELDING |
| I.S. EN 1668:1998 | WELDING CONSUMABLES - RODS, WIRES AND DEPOSITS FOR TUNGSTEN INERT GAS WELDING OF NON ALLOY AND FINE GRAIN STEELS - CLASSIFICATION |
| 02/710860 DC : DRAFT SEP 2002 | BS EN 14532-3 - WELDING CONSUMABLES - TEST METHODS AND QUALITY REQUIREMENTS - PART 3: CONFORMITY ASSESSMENT OF WIRE ELECTRODES, WIRES AND RODS FOR WELDING OF ALUMINIUM ALLOYS |
| 05/30132920 DC : DRAFT APR 2005 | EN 1090-2 - EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR THE EXECUTION OF STEEL STRUCTURES |
| 04/19989519 DC : DRAFT AUG 2004 | BS EN ISO 15614-7 - SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 7: OVERLAY WELDING |
| 03/115225 DC : DRAFT SEP 2003 | BS EN 1011-6 - WELDING - RECOMMENDATION FOR WELDING OF METALLIC MATERIALS - PART 6: LASER BEAM WELDING |
| BS EN 1011-6:2005 | Welding. Recommendations for welding of metallic materials Laser beam welding |
| I.S. EN 4632-003:2010 | AEROSPACE SERIES - WELDABILITY AND BRAZEABILITY OF MATERIALS IN AEROSPACE CONSTRUCTIONS - PART 003: WELDING AND BRAZING OF HOMOGENEOUS ASSEMBLIES OF UNALLOYED AND LOW ALLOY STEELS |
| DIN EN ISO 15609-1:2005-01 | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE SPECIFICATION - PART 1: ARC WELDING |
| BS EN 1668:1997 | Welding consumables. Rods, wires and deposits for tungsten inert gas welding of non alloy and fine grain steels. Classification |
| ISO 9956-11:1996 | Specification and approval of welding procedures for metallic materials Part 11: Welding procedure specification for laser beam welding |
| EN 1011-6:2005 | Welding - Recommendation for welding of metallic materials - Part 6: Laser beam welding |
| EN ISO 15610:2003 | Specification and qualification of welding procedures for metallic materials - Qualification based on tested welding consumables (ISO 15610:2003) |
| EN 14532-3:2004 | Welding consumables - Test methods and quality requirements - Part 3: Conformity assessment of wire electrodes, wires and rods for welding of aluminium alloys |
| UNI EN ISO 15614-5 : 2005 | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 5: ARC WELDING OF TITANIUM, ZIRCONIUM AND THEIR ALLOYS |
| I.S. EN ISO 15614-4:2005 | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 4: FINISHING WELDING OF ALUMINIUM CASTINGS |
| I.S. EN 12534:2000 | WELDING CONSUMABLES - WIRE ELECTRODES, WIRES, RODS AND DEPOSITS FOR GAS SHIELDED METAL ARC WELDING OF HIGH STRENGTH STEELS - CLASSIFICATION |
| I.S. EN ISO 15610:2004 | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - QUALIFICATION BASED ON TESTED WELDING CONSUMABLES |
| 00/708210 DC : DRAFT MAY 2000 | ISO/DIS 1071 - WELDING CONSUMABLES - WELDING CONSUMABLES FOR FUSION WELDING OF CAST IRON - CLASSIFICATION |
| 95/713573 DC : 0 | PREN 288-12 - SPECIFICATION AND APPROVAL OF WELDING PROCEDURES FOR METALLIC MATERIALS - PART 12: WELDING PROCEDURE TESTS FOR THE ARC WELDING OF CAST STEELS |
| 02/710858 DC : DRAFT SEP 2002 | BS EN 14532-1 - WELDING CONSUMABLES - TEST METHODS AND QUALITY REQUIREMENTS - PART 1: PRIMARY METHODS AND CONFORMITY ASSESSMENT OF CONSUMABLES FOR STEEL, NICKEL AND NICKEL ALLOYS |
| 03/107142 DC : DRAFT MAY 2003 | EN 14700 - WELDING CONSUMABLES - WELDING CONSUMABLES FOR HARD-FACING |
| 03/115441 DC : DRAFT OCT 2003 | BS EN ISO 15614-6 - SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - ARC WELDING OF COPPER AND ITS ALLOYS |
| BIS IS 16002-4 : 2012 | WELDING - TEST FOR SHOP PRIMERS IN RELATION TO WELDING AND ALLIED PROCESSES - PART 4: EMISSION OF FUMES AND GASES |
| I.S. EN 1011-6:2006 | WELDING - RECOMMENDATION FOR WELDING OF METALLIC MATERIALS - PART 6: LASER BEAM WELDING |
| I.S. ENV 1999-1-1:1998 | EUROCODE 9: DESIGN OF ALUMINIUM STRUCTURES - PART 1-1: GENERAL RULES - GENERAL RULES AND RULES FOR BUILDINGS |
| DIN EN 14532-3:2005-02 | WELDING CONSUMABLES - TEST METHODS AND QUALITY REQUIREMENTS - PART 3: CONFORMITY ASSESSMENT OF WIRE ELECTRODES, WIRES AND RODS FOR WELDING OF ALUMINIUM ALLOYS |
| BS EN 288-5:1995 | Specification and approval of welding procedures for metallic materials Approval by using approved welding consumables for arc welding |
| BS EN 12534:1999 | Welding consumables. Wire electrodes, wires, rods and deposits for gas shielded metal arc welding of high strength steels. Classification |
| ISO 15614-5:2004 | Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 5: Arc welding of titanium, zirconium and their alloys |
| BS EN 288-2:1992 | Specification and approval of welding procedures for metallic materials Welding procedures specification for arc welding |
| BS EN 12071:2000 | Welding consumables. Tubular electrodes for gas shielded metal arc welding of creep-resisting steels. Classification |
| BS EN 12535:2000 | Welding consumables. Tubular cored electrodes for gas shielded metal arc welding of high strength steels. Classification |
| ISO 17652-4:2003 | Welding — Test for shop primers in relation to welding and allied processes — Part 4: Emission of fumes and gases |
| BS EN ISO 15610:2003 | Specification and qualification of welding procedures for metallic materials. Qualification based on tested welding consumables |
| ISO 17652-2:2003 | Welding — Test for shop primers in relation to welding and allied processes — Part 2: Welding properties of shop primers |
| BS EN 14532-3:2004 | Welding consumables. Test methods and quality requirements Conformity assessment of wire electrodes, wires and rods for welding of aluminium alloys |
| ISO 15609-1:2004 | Specification and qualification of welding procedures for metallic materials Welding procedure specification Part 1: Arc welding |
| DIN EN ISO 15610:2004-02 | Specification and qualification of welding procedures for metallic materials - Qualification based on tested welding consumables (ISO 15610:2003) |
| EN ISO 17652-4:2003 | Welding - Test for shop primers in relation to welding and allied processes - Part 4: Emission of fumes and gases (ISO 17652-4:2003) |
| EN ISO 9956-11 : 1996 | SPECIFICATION AND APPROVAL OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE SPECIFICATION FOR LASER BEAM WELDING |
| EN 14532-1:2004 | Welding consumables - Test methods and quality requirements - Part 1: Primary methods and conformity assessment of consumables for steel, nickel and nickel alloys |
| EN 288-9 : 1999 | SPECIFICATION AND APPROVAL OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST FOR PIPELINE WELDING ON LAND AND OFFSHORE SITE BUTT WELDING OF TRANSMISSION PIPELINES |
| EN 1668 : 1997 | WELDING CONSUMABLES - RODS, WIRES AND DEPOSITS FOR TUNGSTEN INERT GAS WELDING OF NON ALLOY AND FINE GRAIN STEELS - CLASSIFICATION |
| EN 288-2:1992/A1:1997 | SPECIFICATION AND APPROVAL OF WELDING PROCEDURES FOR METALLIC MATERIALS - PART 2: WELDING PROCEDURE SPECIFICATION FOR ARC WELDING |
| EN ISO 15609-1:2004 | Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 1: Arc welding (ISO 15609-1:2004) |
| EN ISO 17652-2:2003 | Welding - Test for shop primers in relation to welding and allied processes - Part 2: Welding properties of shop primers (ISO 17652-2:2003) |
| EN 440 : 1994 | WELDING CONSUMABLES - WIRE ELECTRODES AND DEPOSITS FOR GAS SHIELDED METAL ARC WELDING OF NON ALLOY AND FINE GRAIN STEELS - CLASSIFICATION |
| EN 758 : 1997 | WELDING CONSUMABLES - TUBULAR COVERED ELECTRODES FOR METAL ARC WELDING WITH AND WITHOUT A GAS SHIELD OF NON ALLOY AND FINE GRAIN STEELS - CLASSIFICATION |
| EN 4632-003:2010 | Aerospace series - Weldability and brazeability of materials in aerospace constructions - Part 003: Welding and brazing of homogeneous assemblies of unalloyed and low alloy steels |
| EN ISO 15614-5:2004 | Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 5: Arc welding of titanium, zirconium and their alloys (ISO 15614-5:2004) |
| ENV 1999-1-1 : 1998 | EUROCODE 9: DESIGN OF ALUMINIUM STRUCTURES - PART 1-1: GENERAL RULES - GENERAL RULES AND RULES FOR BUILDINGS |
| I.S. EN 12535:2000 | WELDING CONSUMABLES - TUBULAR CORED ELECTRODES FOR GAS SHIELDED METAL ARC WELDING OF HIGH STRENGTH STEELS - CLASSIFICATION |
| PREN ISO 15614-6 : DRAFT 2003 | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 6: ARC WELDING OF COPPER AND ITS ALLOYS |
| DIN EN 1011-3:2001-01 | WELDING - RECOMMENDATIONS FOR WELDING OF METALLIC - MATERIALS - PART 3: ARC WELDING OF STAINLESS STEELS |
| BS EN 1011-3:2000 | Welding. Recommendations for welding of metallic materials Arc welding of stainless steels |
| KTA 3201.3 : 2007(R2012) | COMPONENTS OF THE REACTOR COOLANT PRESSURE BOUNDARY OF LIGHT WATER REACTORS - PART 3: MANUFACTURE |
| BS EN 12073:2000 | Welding consumables. Tubular cored electrodes for metal arc welding with or without a gas shield of stainless and heat-resisting steels. Classification |
| BS EN ISO 15609-1:2004 | Specification and qualification of welding procedures for metallic materials. Welding procedure specification Arc welding |
| BS EN ISO 17652-2:2003 | Welding. Test for shop primers in relation to welding and allied processes Welding properties of shop primers |
| ISO 15610:2003 | Specification and qualification of welding procedures for metallic materials — Qualification based on tested welding consumables |
| BS EN 1011-4:2000 | Welding. Recommendations for welding of metallic materials Arc welding of aluminium and aluminium alloys |
| BS EN 288-9:1999 | Specification and approval of welding procedures for metallic materials Welding procedure test for pipeline welding on land and offshore site butt welding of transmission pipelines |
| DIN EN ISO 15614-5:2004-07 | Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 5: Arc welding of titanium, zirconium and their alloys (ISO 15614-5:2004) |
| DIN EN ISO 17652-2:2003-07 | WELDING - TEST FOR SHOP PRIMERS IN RELATION TO WELDING AND ALLIED PROCESSES - PART 2: WELDING PROPERTIES OF SHOP PRIMERS |
| I.S. EN ISO 15614-5:2004 | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 5: ARC WELDING OF TITANIUM, ZIRCONIUM AND THEIR ALLOYS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.