EN 559 : 2003
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
GAS WELDING EQUIPMENT - RUBBER HOSES FOR WELDING, CUTTING AND ALLIED PROCESSES
01-03-2010
12-01-2013
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Abbreviation
5 Application
6 Hose designation
7 Materials
7.1 Construction
7.2 Manufacture
8 Dimensions and tolerances
8.1 Internal diameter
8.2 Concentricity (total indicator reading)
8.3 Cut lengths and tolerances
9 Requirements and tests
9.1 Basic requirements
9.2 Special requirements
10 Hose colour and gas identification
10.1 General
10.2 Gas identification
10.3 Marking
Annex A (normative) Method of test for non-ignition
A.1 Apparatus
A.2 Procedure
Annex B (normative) Method of test for resistance to
n-pentane
Annex C (normative) Method of test for resistance to
incandescent particles and hot surfaces
Annex D (normative) Summary of requirements and tests
for type approval
Bibliography
Specifies requirements for rubber hoses for welding, cutting and allied processes. Applies to hoses used in: gas welding and cutting; processes allied to welding and cutting; arc welding under the protection of an inert or active gas.
| Committee |
TC 121
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| NF EN 559 : 2003 | Identical |
| SN EN 559 : 2003 | Identical |
| NS EN 559 : 2003 | Identical |
| NBN EN 1327 : 1996 | Identical |
| NEN EN 559 : 2003 | Identical |
| NBN EN 559 : 2003 | Identical |
| PN EN 559 : 2006 | Identical |
| UNI EN 559 : 2006 | Identical |
| UNE-EN 559:2003 | Identical |
| NBN EN 1256 : 2006 | Identical |
| BS EN 559:2003 | Identical |
| I.S. EN 559:2003 | Identical |
| DIN 8541-120:1997-05 | Corresponds |
| DIN EN 559:2003-08 | Identical |
| EN 15339-2:2007 | Thermal spraying - Safety requirements for thermal spraying equipment - Part 2: Gas control units |
| S.R. CR 13259:1998 | GAS WELDING EQUIPMENT - INDUSTRIAL MANUAL AND MACHINE OXYGEN-FUEL GASES BLOWPIPES FOR FLAME HEATING AND ALLIED PROCESSES |
| BS EN 561:2002 | Gas welding equipment. Quick-action coupling with shut-off valves for welding, cutting and allied processes |
| EN 1326:1996 | Gas welding equipment - Small kits for gas brazing and welding |
| CR 13259:1998 | Gas welding equipment - Industrial manual and machine oxygen-fuel gases blowpipes for flame heating and allied processes |
| TR 103 088 : 1.3.1 | ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM); USING THE ETSI EN 301 489 SERIES OF EMC STANDARDS |
| PD 6633:1998 | Gas welding equipment. Industrial manual and machine oxygen-fuel gases blowpipes for flame heating and allied processes |
| DIN EN 1256:2008-03 | Gas welding equipment - Specification for hose assemblies for equipment for welding, cutting and allied processes |
| I.S. EN 1256:2006 | GAS WELDING EQUIPMENT - SPECIFICATION FOR HOSE ASSEMBLIES FOR EQUIPMENT FOR WELDING, CUTTING AND ALLIED PROCESSES |
| DIN EN 15339-2:2007-06 | Thermal spraying - Safety requirements for thermal spraying equipment - Part 2: Gas control units |
| 04/30124304 DC : DRAFT OCT 2004 | EN 1256 - GAS WELDING EQUIPMENT - SPECIFICATION FOR HOSE ASSEMBLIES FOR EQUIPMENT FOR WELDING, CUTTING AND ALLIED PROCESSES |
| 04/30096910 DC : DRAFT OCT 2004 | ISO 11553-2 - SAFETY OF MACHINERY - LASER PROCESSING MACHINES - PART 2: SAFETY REQUIREMENTS FOR HAND OPERATED LASER PROCESSING DEVICES |
| I.S. EN 15339-2:2007 | THERMAL SPRAYING - SAFETY REQUIREMENTS FOR THERMAL SPRAYING EQUIPMENT - PART 2: GAS CONTROL UNITS |
| BS EN 15339-2:2007 | Thermal spraying. Safety requirements for thermal spraying equipment Gas control units |
| BS EN 1256:2006 | Gas welding equipment. Specification for hose assemblies for equipment for welding, cutting and allied processes |
| EN 1327:1996 | Gas welding equipment - Thermoplastic hoses for welding and allied processes |
| EN 561:2002 | Gas welding equipment - Quick-action coupling with shut-off valves for welding, cutting and allied processes |
| 12/30261644 DC : 0 | BS EN 16436 - RUBBER AND PLASTIC HOSES AND TUBINGS FOR USE WITH PROPANE, BUTANE AND THEIR MIXTURES IN THE VAPOUR PHASE |
| DIN EN 561:2002-09 | GAS WELDING EQUIPMENT - QUICK ACTION COUPLING WITH SHUT-OFF VALVES FOR WELDING, CUTTING AND ALLIED PROCESSES |
| EN 1256:2006 | Gas welding equipment - Specification for hose assemblies for equipment for welding, cutting and allied processes |
| EN ISO 8330:2014 | Rubber and plastics hoses and hose assemblies - Vocabulary (ISO 8330:2014) |
| EN ISO 1402:2009 | Rubber and plastics hoses and hose assemblies - Hydrostatic testing (ISO 1402:2009) |
| EN 1256:2006 | Gas welding equipment - Specification for hose assemblies for equipment for welding, cutting and allied processes |
| ISO 4672:1997 | Rubber and plastics hoses Sub-ambient temperature flexibility tests |
| EN ISO 1307:2008 | Rubber and plastics hoses - Hose sizes, minimum and maximum inside diameters, and tolerances on cut-to-length hoses (ISO 1307:2006) |
| ISO 188:2011 | Rubber, vulcanized or thermoplastic — Accelerated ageing and heat resistance tests |
| EN ISO 4672:1999 | Rubber and plastics hoses - Sub-ambient temperature flexibility tests (ISO 4672:1997) |
| EN ISO 11114-3:2010 | Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 3: Autogenous ignition test for non-metallic materials in oxygen atmosphere (ISO 11114-3:2010) |
| ISO 11114-3:2010 | Gas cylinders Compatibility of cylinder and valve materials with gas contents Part 3: Autogenous ignition test for non-metallic materials in oxygen atmosphere |
| ISO 7326:2016 | Rubber and plastics hoses Assessment of ozone resistance under static conditions |
| ISO 8330:2007 | Rubber and plastics hoses and hose assemblies Vocabulary |
| EN 27326 : 1993 | RUBBER AND PLASTICS HOSES - ASSESSMENT OF OZONE RESISTANCE UNDER STATIC CONDITIONS |
| EN ISO 4080:2009 | Rubber and plastics hoses and hose assemblies - Determination of permeability to gas (ISO 4080:2009) |
| EN ISO 1746:2000 | Rubber or plastics hoses and tubing - Bending tests (ISO 1746:1998, including technical corrigendum 1:1999) |
| EN 28033 : 1993 | RUBBER AND PLASTICS HOSES - DETERMINATION OF ADHESION BETWEEN COMPONENTS |
| EN 1327:1996 | Gas welding equipment - Thermoplastic hoses for welding and allied processes |
| ISO 37:2017 | Rubber, vulcanized or thermoplastic — Determination of tensile stress-strain properties |
| ISO 4671:2007 | Rubber and plastics hoses and hose assemblies Methods of measurement of the dimensions of hoses and the lengths of hose assemblies |
| ISO 471:1995 | Rubber Temperatures, humidities and times for conditioning and testing |
| ISO 1402:2009 | Rubber and plastics hoses and hose assemblies Hydrostatic testing |
| ISO 1307:2006 | Rubber and plastics hoses — Hose sizes, minimum and maximum inside diameters, and tolerances on cut-to-length hoses |
| ISO 4080:2009 | Rubber and plastics hoses and hose assemblies — Determination of permeability to gas |
| ISO 8033:2016 | Rubber and plastics hoses Determination of adhesion between components |
| ISO 1817:2015 | Rubber, vulcanized or thermoplastic Determination of the effect of liquids |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.