EN 60143-1:2015/AC:2017-05
Current
Current
The latest, up-to-date edition.
Series capacitors for power systems - Part 1: General
Amendment of
Published date
12-05-2017
Sorry this product is not available in your region.
FOREWORD
1 Scope and object
2 Normative references
3 Terms and definitions
4 Service conditions
5 Quality requirements and tests
6 Insulation level
7 Overloads, overvoltages and duty cycles
8 Safety requirements
9 Markings and instruction books
10 Guide for selection of ratings, installation and operation
Annex A (normative) - Test requirements and application
guide for external fuses and units to be externally fused
Annex B (informative) - Economic evaluation of series
capacitor bank losses
Annex C (informative) - Capacitor bank fusing and unit
arrangement
Annex D (informative) - Examples of typical connection
diagrams for large series capacitor installations for
transmission lines
Annex E (informative) - Precautions to be taken to avoid
pollution of the environment by polychlorinated
biphenyls
Bibliography
Annex ZA (normative) - Normative references to
international publications with their
corresponding European publications
| Committee |
SR 33
|
| DocumentType |
Standard
|
| PublisherName |
European Committee for Standards - Electrical
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| NF EN 60143-1 : 2015 | Identical |
| IEC 60143-1:2015 | Identical |
| NBN EN 60143-1 : 2005 | Identical |
| NEN EN IEC 60143-1 : 2015 C1 2017 | Identical |
| I.S. EN 60143-1:2015 | Identical |
| ONORM OVE EN 60143-1 : 2016 | Identical |
| PN EN 60143-1 : 2015 AC 2017 | Identical |
| VDE 0560-42 : 2016 | Identical |
| DIN EN 60143-1 : 2016 | Identical |
| BS EN 60143-1:2015 | Identical |
| CEI EN 60143-1 : 2016 | Identical |
| IEC 60143-1:2015/COR1:2017 | Identical |
| DS EN 60143-1 : 2015 COR 2017 | Identical |
| UNE-EN 60143-1:2004 | Identical |
| BS EN 60143-4:2010 | Series capacitors for power systems Thyristors controlled series capacitors |
| BS EN 60143-3:2015 | Series capacitors for power systems Internal fuses |
| I.S. EN 60143-4:2010 | SERIES CAPACITORS FOR POWER SYSTEMS - PART 4: THYRISTOR CONTROLLED SERIES CAPACITORS |
| BS EN 60519-11:2007 | Safety in electroheat installations Particular requirements for installations using the effect of electromagnetic forces on liquid metals |
| EN 62271-109:2009/A1:2013 | HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 109: ALTERNATING-CURRENT SERIES CAPACITOR BY-PASS SWITCHES (IEC 62271-109:2008/A1:2013) |
| CEI EN 60143-4 : 2012 | SERIES CAPACITORS FOR POWER SYSTEMS - PART 4: THYRISTOR CONTROLLED SERIES CAPACITORS |
| I.S. EN 60143-2:2013 | SERIES CAPACITORS FOR POWER SYSTEMS - PART 2: PROTECTIVE EQUIPMENT FOR SERIES CAPACITOR BANKS (IEC 60143-2:2012 (EQV)) |
| BS EN 60143-2:2013 | Series capacitors for power systems Protective equipment for series capacitor banks |
| CEI EN 60143-2 : 2014 | SERIES CAPACITORS FOR POWER SYSTEMS - PART 2: PROTECTIVE EQUIPMENT FOR SERIES CAPACITOR BANKS |
| I.S. EN 60519-3:2005 | SAFETY IN ELECTROHEAT INSTALLATIONS - PART 3: PARTICULAR REQUIREMENTS FOR INDUCTION AND CONDUCTION HEATING AND INDUCTION MELTING INSTALLATIONS |
| BS EN 60519-3:2005 | Safety in electroheat installations Particular requirements for induction and conduction heating and induction melting installations |
| BS EN 60099-9:2014 | Surge arresters Metal-oxide surge arresters without gaps for HVDC converter stations |
| BS EN 62271-109 : 2009 | HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 109: ALTERNATING-CURRENT SERIES CAPACITOR BY-PASS SWITCHES |
| I.S. EN 60519-11:2007 | SAFETY IN ELECTROHEAT INSTALLATIONS - PART 11: PARTICULAR REQUIREMENTS FOR INSTALLATIONS USING THE EFFECT OF ELECTROMAGNETIC FORCES ON LIQUID METALS |
| I.S. EN 60143-3:2015 | SERIES CAPACITORS FOR POWER SYSTEMS - PART 3: INTERNAL FUSES |
| I.S. EN 62271-109:2009 | HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 109: ALTERNATING-CURRENT SERIES CAPACITOR BY-PASS SWITCHES (IEC 62271-109:2008 (EQV)) |
| EN 60143-3:2015 | Series capacitors for power systems - Part 3: Internal fuses |
| EN 60519-3:2005 | Safety in electroheat installations - Part 3: Particular requirements for induction and conduction heating and induction melting installations |
| EN 60099-9:2014 | Surge arresters - Part 9: Metal-oxide surge arresters without gaps for HVDC converter stations |
| EN 60143-4:2010 | Series capacitors for power systems - Part 4: Thyristor controlled series capacitors |
| EN 60143-2:2013 | Series capacitors for power systems - Part 2: Protective equipment for series capacitor banks |
| EN 60519-11:2007 | Safety in electroheat installations - Part 11: Particular requirements for installations using the effect of electromagnetic forces on liquid metals |
| CEI EN 60519-11 : 2008 | SAFETY IN ELECTROHEAT INSTALLATIONS - PART 11: PARTICULAR REQUIREMENTS FOR INSTALLATIONS USING THE EFFECT OF ELECTROMAGNETIC FORCES ON LIQUID METALS |
| CEI EN 60519-3 : 2006 | SAFETY IN ELECTROHEAT INSTALLATIONS - PART 3: PARTICULAR REQUIREMENTS FOR INDUCTION AND CONDUCTION HEATING AND INDUCTION MELTING INSTALLATIONS |
| IEC 60060-2:2010 | High-voltage test techniques - Part 2: Measuring systems |
| IEC 60143-2:2012 | Series capacitors for power systems - Part 2: Protective equipment for series capacitor banks |
| IEC 60270:2000+AMD1:2015 CSV | High-voltage test techniques - Partial discharge measurements |
| EN 61048:2006/A1:2016 | AUXILIARIES FOR LAMPS - CAPACITORS FOR USE IN TUBULAR FLUORESCENT AND OTHER DISCHARGE LAMP CIRCUITS - GENERAL AND SAFETY REQUIREMENTS (IEC 61048:2006/A1:2015) |
| IEC 61048:2006+AMD1:2015 CSV | Auxiliaries for lamps - Capacitors for use in tubular fluorescent and other discharge lamp circuits - General and safety requirements |
| EN 62271-1:2017 | High-voltage switchgear and controlgear - Part 1: Common specifications for alternating current switchgear and controlgear |
| IEC 60050-601:1985 | International Electrotechnical Vocabulary (IEV) - Part 601: Generation, transmission and distribution of electricity - General |
| IEC TS 60815-2:2008 | Selection and dimensioning of high-voltage insulators intended for use in polluted conditions - Part 2: Ceramic and glass insulators for a.c. systems |
| EN 60143-3:2015 | Series capacitors for power systems - Part 3: Internal fuses |
| EN 60060-1:2010 | High-voltage test techniques - Part 1: General definitions and test requirements |
| EN 60549:2013 | High-voltage fuses for the external protection of shunt capacitors |
| IEC 60909-0:2016 | Short-circuit currents in three-phase a.c. systems - Part 0: Calculation of currents |
| EN 60252-1 : 2011 AMD 1 2013 | AC MOTOR CAPACITORS - PART 1: GENERAL - PERFORMANCE, TESTING AND RATING - SAFETY REQUIREMENTS - GUIDANCE FOR INSTALLATION AND OPERATION (IEC 60252-1:2010/A1:2013) |
| IEC 60549:2013 | High-voltage fuses for the external protection of shunt capacitors |
| EN 60270:2001/A1:2016 | HIGH-VOLTAGE TEST TECHNIQUES - PARTIAL DISCHARGE MEASUREMENTS (IEC 60270:2000/A1:2015) |
| IEC TR 60996:1989 | Method for verifying accuracy of tan delta measurements applicable to capacitors |
| EN 60060-2:2011 | High-voltage test techniques - Part 2: Measuring systems |
| IEC 61049:1991 | Capacitors for use in tubular fluorescent and other discharge lamp circuits. Performance requirements |
| EN 61049:1993 | Capacitors for use in tubular fluorescent and other discharge lamp circuits - Performance requirements |
| EN 61071:2007 | Capacitors for power electronics |
| EN 60143-2:2013 | Series capacitors for power systems - Part 2: Protective equipment for series capacitor banks |
| IEC 60721-2-6:1990 | Classification of environmental conditions. Part 2: Environmental conditions appearing in nature. Earthquake vibration and shock |
| IEC 60871-1:2014 | Shunt capacitors for a.c. power systems having a rated voltage above 1 000 V - Part 1: General |
| IEC 60273:1990 | Characteristic of indoor and outdoor post insulators for systems with nominal voltages greater than 1000 V |
| EN 60909-0:2016 | Short-circuit currents in three-phase a.c. systems - Part 0: Calculation of currents |
| EN 60071-1:2006/A1:2010 | INSULATION CO-ORDINATION - PART 1: DEFINITIONS, PRINCIPLES AND RULES |
| IEC 62271-1:2017 | High-voltage switchgear and controlgear - Part 1: Common specifications for alternating current switchgear and controlgear |
| IEC 60252-1:2010+AMD1:2013 CSV | AC motor capacitors - Part 1: General - Performance, testing andrating - Safety requirements - Guidance for installation and operation |
| IEC 60071-2:1996 | Insulation co-ordination - Part 2: Application guide |
| IEC 60050-436:1990 | International Electrotechnical Vocabulary (IEV) - Part 436: Power capacitors |
| EN 60071-2:1997 | Insulation co-ordination - Part 2: Application guide |
| EN 60110-1:1998 | Power capacitors for induction heating installations - Part 1: General |
| IEC 60060-1:2010 | High-voltage test techniques - Part 1: General definitions and test requirements |
| IEC 60071-1:2006+AMD1:2010 CSV | Insulation co-ordination - Part 1: Definitions, principles and rules |
| EN 60871-1:2014 | Shunt capacitors for a.c. power systems having a rated voltage above 1 000 V - Part 1: General |
| IEC 60143-3:2015 | Series capacitors for power systems - Part 3: Internal fuses |
| IEC TS 60815-1:2008 | Selection and dimensioning of high-voltage insulators intended for use in polluted conditions - Part 1: Definitions, information and general principles |
| IEC 60143-4:2010 | Series capacitors for power systems - Part 4: Thyristor controlled series capacitors |
| EN 60143-4:2010 | Series capacitors for power systems - Part 4: Thyristor controlled series capacitors |
| IEEE 693-2005 | IEEE Recommended Practice for Seismic Design of Substations |
| IEC TS 60815-3:2008 | Selection and dimensioning of high-voltage insulators intended for use in polluted conditions - Part 3: Polymer insulators for a.c. systems |
| IEC 60110-1:1998 | Power capacitors for induction heating installations - Part 1: General |
Summarise
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Sorry this product is not available in your region.