EN 60546-1:2010
Current
The latest, up-to-date edition.
Controllers with analogue signals for use in industrial-process control systems - Part 1: Methods of evaluating the performance
08-10-2010
FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Terms and definitions
4 Basic relationships
5 General test conditions
6 Offset
7 Dial markings and scale values
8 Effect of influence quantities
9 Output characteristics and power consumption
10 Frequency response
11 Miscellaneous tests
12 Documentary information
13 Technical examination
14 Test report
15 Summary of tests
Bibliography
Annex ZA (normative) - Normative references to international
publications with their corresponding European
publications
IEC 60546-1:2010 is intended to specify uniform methods of test for evaluating the performance of industrial-process PID controllers with analogue input and output signals. The test conditions specified in this standard, for example the range of ambient temperatures, power supply, etc., are used when no other values are agreed upon by the manufacturer and the user. This third edition cancels and replaces the second edition, published in 1987 and constitutes a minor technical revision made to bring terms, measurement units and references up to date.
| Committee |
CLC/TC 65X
|
| DevelopmentNote |
Supersedes HD 530.1 (05/2001)
|
| DocumentType |
Standard
|
| PublisherName |
European Committee for Standards - Electrical
|
| Status |
Current
|
| Standards | Relationship |
| SN EN 60546-1 : 1993 | Identical |
| NF EN 60546-1 : 2011 | Identical |
| BS EN 60546-1:2010 | Identical |
| NBN EN 60546-1 : 2011 | Identical |
| I.S. EN 60546-1:2010 | Identical |
| IEC 60546-1:2010 | Identical |
| NEN 10546-1 : 1993 | Identical |
| PN EN 60546-1 : 2011 | Identical |
| NEN EN IEC 60546-1 : 2010 | Identical |
| CEI EN 60546-1 : 2011 | Identical |
| UNE-EN 60546-1:2010 | Identical |
| UNE-EN 60546-1:1997 | Identical |
| DIN EN 60546-1:2011-06 | Identical |
| PNE-EN 60546-1 | Identical |
| I.S. EN 60546-2:2010 | CONTROLLERS WITH ANALOGUE SIGNALS FOR USE IN INDUSTRIAL-PROCESS CONTROL SYSTEMS - PART 2: GUIDANCE FOR INSPECTION AND ROUTINE TESTING |
| EN 60546-2:2010 | Controllers with analogue signals for use in industrial-process control systems - Part 2: Guidance for inspection and routine testing |
| EN 61069-4:2016 | Industrial-process measurement, control and automation - Evaluation of system properties for the purpose of system assessment - Part 4: Assessment of system performance |
| DIN EN 60546-2:2011-04 | CONTROLLERS WITH ANALOGUE SIGNALS FOR USE IN INDUSTRIAL-PROCESS CONTROL SYSTEMS - PART 2: GUIDANCE FOR INSPECTION AND ROUTINE TESTING |
| CEI EN 60546-2 : 2013 | CONTROLLERS WITH ANALOGUE SIGNALS FOR USE IN INDUSTRIAL-PROCESS CONTROL SYSTEMS - PART 2: GUIDANCE FOR INSPECTION AND ROUTINE TESTING |
| BS EN 60546-2:2010 | Controllers with analogue signals for use in industrial-process control systems Guidance for inspection and routine testing |
| BS EN 61069-4:2016 | Industrial-process measurement, control and automation. Evaluation of system properties for the purpose of system assessment Assessment of system performance |
| I.S. EN 61069-4:2016 | INDUSTRIAL-PROCESS MEASUREMENT, CONTROL AND AUTOMATION - EVALUATION OF SYSTEM PROPERTIES FOR THE PURPOSE OF SYSTEM ASSESSMENT - PART 4: ASSESSMENT OF SYSTEM PERFORMANCE |
| IEC 60050-351:2013 | International Electrotechnical Vocabulary (IEV) - Part 351: Control technology |
| EN 61298-1:2008 | PROCESS MEASUREMENT AND CONTROL DEVICES - GENERAL METHODS AND PROCEDURES FOR EVALUATING PERFORMANCE - PART 1: GENERAL CONSIDERATIONS |
| IEC 61298-1:2008 | Process measurement and control devices - General methods and procedures for evaluating performance - Part 1: General considerations |
| EN 61298-3:2008 | Process measurement and control devices - General methods and procedures for evaluating performance - Part 3: Tests for the effects of influence quantities |
| IEC 60546-2:2010 | Controllers with analogue signals for use in industrial-process control systems - Part 2: Guidance for inspection and routine testing |
| EN 61298-4:2008 | Process measurement and control devices - General methods and procedures for evaluating performance - Part 4: Evaluation report content |
| EN 61000-4-2:2009 | Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test |
| IEC 60068-2-31:2008 | Environmental testing - Part 2-31: Tests - Test Ec: Rough handling shocks, primarily for equipment-type specimens |
| EN 61000-4-3 : 2006 AMD 2 2010 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-3: TESTING AND MEASUREMENT TECHNIQUES - RADIATED, RADIO-FREQUENCY, ELECTROMAGNETIC FIELD IMMUNITY TEST |
| IEC 60382:1991 | Analogue pneumatic signal for process control systems |
| IEC 61298-3:2008 | Process measurement and control devices - General methods and procedures for evaluating performance - Part 3: Tests for the effects of influence quantities |
| IEC 61000-4-2:2008 | Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test |
| IEC 61000-4-3:2006+AMD1:2007+AMD2:2010 CSV | Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test |
| IEC 61298-4:2008 | Process measurement and control devices - General methods and procedures for evaluating performance - Part 4: Evaluation report content |
| EN 60068-2-6:2008 | Environmental testing - Part 2-6: Tests - Test Fc: Vibration (sinusoidal) |
| IEC 60027-2:2005 | Letter symbols to be used in electrical technology - Part 2: Telecommunications and electronics |
| EN 61010-1:2010 | Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements |
| EN 60068-2-30:2005 | Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle) |
| IEC 61010-1:2010+AMD1:2016 CSV | Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements |
| EN 60068-2-31:2008 | ENVIRONMENTAL TESTING - PART 2-31: TESTS - TEST EC: ROUGH HANDLING SHOCKS, PRIMARILY FOR EQUIPMENT-TYPE SPECIMENS |
| IEC 60068-2-30:2005 | Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.