EN 60838-1:2017/A1:2017
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
MISCELLANEOUS LAMPHOLDERS - PART 1: GENERAL REQUIREMENTS AND TESTS (IEC 60838-1:2016/A1:2017)
11-08-2021
12-01-2013
FOREWORD
1 Scope
2 Normative references
3 Terms and definitions
4 General requirement
5 General conditions for tests
6 Classification
7 Marking
8 Protection against electric shock
9 Terminals
10 Provision for earthing
11 Construction
12 Moisture resistance, insulation resistance and
electric strength
13 Mechanical strength
14 Screws, current-carrying parts and connections
15 Creepage distances and clearances
16 Endurance
17 Resistance to heat and fire
18 Resistance to excessive residual stresses (season cracking)
and to rusting
Annex A (informative) - Lampholders covered by this
standard
Annex B (normative) - Suitable metals
Annex C (normative) - Season cracking/corrosion test
Annex D (normative) - Pendulum impact test apparatus
Annex E (informative) - Clauses containing new or more
stringent requirements with respect to the previous
edition
Bibliography
Annex ZA (normative) - Normative references to
international publications with their
corresponding European publications
Annex ZZ (informative) - Relationship between this European
standard and the safety objectives of
Directive 2014/35/EU [2014 OJ L96] aimed
to be covered
Pertains to lampholders of miscellaneous types intended for building-in (to be used with general purpose light sources, projection lamps, floodlighting lamps and street-lighting lamps with caps as listed in annex A) and the methods of test to be used in determining the safe use of lamps in lampholders.
Committee |
TC 34Z
|
DocumentType |
Standard
|
PublisherName |
European Committee for Standards - Electrical
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
Standards | Relationship |
PN-EN 60838-1:2017-07 | Identical |
NEN EN IEC 60838-1 : 2017 AMD 1 2017 | Identical |
IEC 60838-1:2016+AMD1:2017 CSV | Identical |
NF EN 60838-1 : 2017 AMD 1 2017 | Identical |
UNE-EN 60838-1:2006 | Identical |
PN EN 60838-1 : 2017 AMD 1 2017 | Identical |
SN EN 60838-1 : 2017 | Identical |
BS EN 60838-1 : 2017 | Identical |
I.S. EN 60838-1:2017 | Identical |
NBN EN 60838-1 : 2005 AMD 2 2011 | Identical |
UNE-EN 60838-1:2017/A1:2017 | Identical |
CEI EN 60838-1 : 2020 | Identical |
DIN EN 60838-1 : 2017 AMD 1 2018 | Identical |
ONORM OVE EN 60838-1 : 2017 AMD 1 2018 | Identical |
PNE-FprEN 60838-1:2013/FprA1:2016 | Identical |
NEN 10838-1 : 95 AMD 1 97 | Similar to |
BS EN 60838-1:2017+A1:2017 | Identical |
VDE 0616-5 : 2017 AMD 1 2018 | Identical |
I.S. EN 60399:2004 | BARREL THREAD FOR LAMPHOLDERS WITH SHADE HOLDER RING |
CEI 34-119 : 2010 | GUIDE FOR LUMINAIRE DESIGN - INFORMATION FOR A SAFE AND CORRECT OPERATION OF THE LIGHT SOURCES |
BS EN 60399 : 2004 | BARREL THREAD FOR LAMPHOLDERS WITH SHADE HOLDER RING |
CEI EN 60838-2-3 : 1ED 2017 | MISCELLANEOUS LAMPHOLDERS - PART 2-3: PARTICULAR REQUIREMENTS - LAMPHOLDERS FOR DOUBLE-CAPPED LINEAR LED LAMPS |
I.S. EN 60838-2-3:2017 | MISCELLANEOUS LAMPHOLDERS - PART 2-3: PARTICULAR REQUIREMENTS - LAMPHOLDERS FOR DOUBLE-CAPPED LINEAR LED LAMPS |
BS EN 60838-2-3:2017 | Miscellaneous lampholders Particular requirements. Lampholders for double-capped linear LED lamps |
EN 60838-2-3:2017 | Miscellaneous lampholders - Part 2-3: Particular requirements - Lampholders for double-capped linear LED lamps |
EN 60399:2004/A1:2008 | BARREL THREAD FOR LAMPHOLDERS WITH SHADE HOLDER RING |
IEC 60112:2003+AMD1:2009 CSV | Method for the determination of the proof and the comparative tracking indices of solid insulating materials |
EN 60068-2-75:2014 | Environmental testing - Part 2-75: Tests - Test Eh: Hammer tests |
IEC 60238:2016+AMD1:2017 CSV | Edison screw lampholders |
IEC 60061-3:2005 CSV | Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges |
IEC 60664-4:2005 | Insulation coordination for equipment within low-voltage systems - Part 4: Consideration of high-frequency voltage stress |
EN 60238 : 2004 AMD 2 2011 | EDISON SCREW LAMPHOLDERS (IEC 60238:2004/A2:2011) |
IEC 60068-2-20:2008 | Environmental testing - Part 2-20: Tests - Test T: Test methods for solderability and resistance to soldering heat of devices with leads |
IEC 61347-1:2015 RLV | Lamp controlgear - Part 1: General and safety requirements |
IEC 60061-2:2005 CSV | Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders |
IEC 60695-2-11:2014 | Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end-products (GWEPT) |
EN ISO 1456:2009 | Metallic and other inorganic coatings - Electrodeposited coatings of nickel, nickel plus chromium, copper plus nickel and of copper plus nickel plus chromium (ISO 1456:2009) |
ISO 2081:2008 | Metallic and other inorganic coatings Electroplated coatings of zinc with supplementary treatments on iron or steel |
EN 60399:2004/A1:2008 | BARREL THREAD FOR LAMPHOLDERS WITH SHADE HOLDER RING |
EN 60112 : 2003 AMD 1 2009 | METHOD FOR THE DETERMINATION OF THE PROOF AND THE COMPARATIVE TRACKING INDICES OF SOLID INSULATING MATERIALS |
IEC 60399:2004+AMD1:2008 CSV | Barrel thread for lampholders with shade holder ring |
ISO 1456:2009 | Metallic and other inorganic coatings — Electrodeposited coatings of nickel, nickel plus chromium, copper plus nickel and of copper plus nickel plus chromium |
IEC 60352-1:1997 | Solderless connections - Part 1: Wrapped connections - General requirements, test methods and practical guidance |
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
ISO 2093:1986 | Electroplated coatings of tin — Specification and test methods |
IEC 60061-4:2005 CSV | Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 4: Guidelines and general information |
IEC 60598-1:2014+AMD1:2017 CSV | Luminaires - Part 1: General requirements and tests |
EN 60664-1:2007 | Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests |
IEC 60061-1:2005 CSV | Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps |
EN 60352-1:1997 | Solderless connections - Part 1: Wrapped connections - General requirements, test methods and practical guidance |
IEC 60068-2-75:2014 | Environmental testing - Part 2-75: Tests - Test Eh: Hammer tests |
ISO 4046-4:2002 | Paper, board, pulps and related terms Vocabulary Part 4: Paper and board grades and converted products |
EN 60529:1991/AC:2016-12 | DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015) |
EN 60695-11-5:2017 | Fire hazard testing - Part 11-5: Test flames - Needle-flame test method - Apparatus, confirmatory test arrangement and guidance |
IEC 60695-11-5:2016 | Fire hazard testing - Part 11-5: Test flames - Needle-flame test method - Apparatus, confirmatory test arrangement and guidance |
IEC 60664-1:2007 | Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests |
EN 60695-2-11:2014 | Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end-products (GWEPT) (IEC 60695-2-11:2014) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.