EN 60999-2:2003

Current

Current The latest, up-to-date edition.

Connecting devices - Electrical copper conductors - Safety requirements for screw-type and screwless-type clamping units - Part 2: Particular requirements for clamping units for conductors above 35 mm² up to 300 mm² (included)

Available format(s):

Language(s):

Published date: 23-07-2003

Publisher: European Committee for Standards - Electrical

Pure ENs are not available for sale, please purchase a suitable national adoption

Table of Contents - (Show below) - (Hide below)

FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Definitions
4 General
5 General notes on tests
6 Main characteristics
7 Connection of conductors
8 Constructional requirements
9 Tests
Annex A (informative) Relationship between mm[2] and
        AWG/kcmil sizes
Annex B (normative) Conductor rated cross-section and
        corresponding gauges
Annex C (normative) Construction of stranded and
        flexible conductors
Bibliography

Abstract - (Show below) - (Hide below)

Applies to screw-type and screwless-type clamping units for connecting devices, either as separate entities or as integral parts of equipment, for the connection of electrical copper conductors (complying with EN 60228), rigid stranded and/or flexible, having a cross-section above 35 mm2 and up to and including 300 mm2 and equivalent AWG/kcmil sizes with a rated voltage not exceeding 1 000 V a.c. and a frequency up to and including 1 000 Hz and 1 500 V d.c. It applies to clamping units primarily suitable for connecting unprepared conductors. This standard does not apply to clamping units: - for connection by crimping or soldering; - for non-universal clamping units defined in 3.10.2 of EN 60999-1. Has the status of a group safety publication in accordance with IEC Guide 104.

General Product Information - (Show below) - (Hide below)

Committee	CLC/TC 121A
Development Note	To be read in conjunction with EN 60999-1 (09/2003)
Document Type	Standard
ISBN
Pages
Published
Publisher	European Committee for Standards - Electrical
Status	Current

National Adoptions - (Show below) - (Hide below)

Equivalent Standard(s)	Relationship
IEC 60999-2:2003	Identical
NF EN 60999-2 : 2003	Identical
NBN EN 60999-2 : 2004	Identical
NEN EN IEC 60999-2 : 2003	Identical
I.S. EN 60999-2:2003	Identical
PN EN 60999-2 : 2006	Identical
DIN EN 60999-2 : 2004	Identical
VDE 0609-101 : 2004	Identical
UNE-EN 60999-2:2004	Identical
BS EN 60999-2:2003	Identical
CEI EN 60999-2 : 2005	Identical

Standards Referenced By This Book - (Show below) - (Hide below)

BS EN 60079-7 : 2015	EXPLOSIVE ATMOSPHERES - PART 7: EQUIPMENT PROTECTION BY INCREASED SAFETY 'E' (IEC 60079-7:2015)
CEI EN 61534-1 : 2012	POWERTRACK SYSTEMS - PART 1: GENERAL REQUIREMENTS
UNE-EN 61534-1:2011	Powertrack systems -- Part 1: General requirements
UNE-EN 50467:2012	Railway applications - Rolling stock - Electrical connectors, requirements and test methods
BS EN 62368-1 : 2014	AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS
I.S. EN 60079-15:2010	EXPLOSIVE ATMOSPHERES - PART 15: EQUIPMENT PROTECTION BY TYPE OF PROTECTION 'N'
BS EN 60065 : 2014	AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY REQUIREMENTS (IEC 60065:2014, MODIFIED)
I.S. EN 50467:2011	RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRICAL CONNECTORS, REQUIREMENTS AND TEST METHODS
BS EN 50548 : 2011	JUNCTION BOXES FOR PHOTOVOLTAIC MODULES
I.S. EN 50548:2011	JUNCTION BOXES FOR PHOTOVOLTAIC MODULES
EN IEC 60079-7:2015/A1:2018	EXPLOSIVE ATMOSPHERES - PART 7: EQUIPMENT PROTECTION BY INCREASED SAFETY 'E' (IEC 60079-7:2015/A1:2017)
EN 60950-1:2006/A2:2013	INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60950-1:2005/A2:2013, MODIFIED)
BS EN 61076-2-001:2011	Connectors for electronic equipment. Product requirements Circular connectors. Blank detail specification
BS EN 61076-3-118:2010	CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-118: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR A 4 POLE + PE POWER CONNECTOR WITH PUSH-PULL COUPLING
BS HD 60269-2:2013	Low-voltage fuses Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application). Examples of standardized systems of fuses A to K
CEI EN 50467 : 2013	RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRICAL CONNECTORS, REQUIREMENTS AND TEST METHODS
PREN 50467 : DRAFT 2009	RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRICAL CONNECTORS, REQUIREMENTS AND TEST METHODS
I.S. HD 60269-2:2013	LOW-VOLTAGE FUSES - PART 2: SUPPLEMENTARY REQUIREMENTS FOR FUSES FOR USE BY AUTHORIZED PERSONS (FUSES MAINLY FOR INDUSTRIAL APPLICATION) - EXAMPLES OF STANDARDIZED SYSTEMS OF FUSES A TO K (IEC 60269-2:2013 (MOD))
I.S. EN 62852:2015	CONNECTORS FOR DC-APPLICATION IN PHOTOVOLTAIC SYSTEMS - SAFETY REQUIREMENTS AND TESTS
BS EN 62196-1:2014	Plugs, socket-outlets, vehicle connectors and vehicle inlets. Conductive charging of electric vehicles General requirements
CEI EN 50343 : 2015	RAILWAY APPLICATIONS - ROLLING STOCK - RULES FOR INSTALLATION OF CABLING
CEI EN 62196-1 : 2015	PLUGS, SOCKET-OUTLETS, VEHICLE CONNECTORS AND VEHICLE INLETS - CONDUCTIVE CHARGING OF ELECTRIC VEHICLES - PART 1: GENERAL REQUIREMENTS
UNE-EN 62852:2015	Connectors for DC-application in photovoltaic systems - Safety requirements and tests
CEI EN 60079-15 : 2012	EXPLOSIVE ATMOSPHERES - PART 15: EQUIPMENT PROTECTION BY TYPE OF PROTECTION 'N'
EN 60065:2014/AC:2017-01	AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY REQUIREMENTS (IEC 60065:2014/COR2:2016)
EN 60947-1:2007/A2:2014	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: GENERAL RULES (IEC 60947-1:2007/A2:2014)
EN 60079-15:2010	Explosive atmospheres - Part 15: Equipment protection by type of protection "n"
BS 88-2(2013) : 2013 COR 2014	LOW-VOLTAGE FUSES - PART 2: SUPPLEMENTARY REQUIREMENTS FOR FUSES FOR USE BY AUTHORIZED PERSONS (FUSES MAINLY FOR INDUSTRIAL APPLICATION) - EXAMPLES OF STANDARDIZED SYSTEMS OF FUSES A TO K
BS 88-2(2010) : 2010	LOW-VOLTAGE FUSES - PART 2: SUPPLEMENTARY REQUIREMENTS FOR FUSES FOR USE BY AUTHORIZED PERSONS (FUSES MAINLY FOR INDUSTRIAL APPLICATION) - EXAMPLES OF STANDARDIZED SYSTEMS OF FUSES A TO J
I.S. EN 61076-3-118:2010	CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-118: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR A 4 POLE + PE POWER CONNECTOR WITH PUSH-PULL COUPLING
CEI EN 61076-3-118 : 2011	CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-118: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR A 4 POLE + PE POWER CONNECTOR WITH PUSH-PULL COUPLING
09/30214460 DC : 0	BS EN 50548 - JUNCTION BOXES FOR PHOTOVOLTAIC MODULES
BS EN 62790:2015	JUNCTION BOXES FOR PHOTOVOLTAIC MODULES - SAFETY REQUIREMENTS AND TESTS
CEI EN 62368-1 : 2016	AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS
CEI 32-12 : 2014	LOW-VOLTAGE FUSES - PART 2: SUPPLEMENTARY REQUIREMENTS FOR FUSES FOR USE BY AUTHORIZED PERSONS (FUSES MAINLY FOR INDUSTRIAL APPLICATION) - EXAMPLES OF STANDARDIZED SYSTEMS OF FUSES A TO K
DD CLC/TS 50467:2008	RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRICAL CONNECTORS, REQUIREMENTS AND TEST METHODS
BS EN 61076-3-120:2016 (published 2017-01)	Connectors for electronic equipment. Product requirements Rectangular connectors. Detail specification for rewirable power connectors with snap locking for rated voltage of 250 V d.c. and rated current of 30 A
BS EN 50343 : 2014	RAILWAY APPLICATIONS - ROLLING STOCK - RULES FOR INSTALLATION OF CABLING
EN 61534-1:2011/A1:2014	POWERTRACK SYSTEMS - PART 1: GENERAL REQUIREMENTS (IEC 61534-1:2011/A1:2014)
I.S. EN 60079-7:2015	EXPLOSIVE ATMOSPHERES - PART 7: EQUIPMENT PROTECTION BY INCREASED SAFETY 'E'
CEI EN 61076-2-001 : 2012	CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-001: CIRCULAR CONNECTORS - BLANK DETAIL SPECIFICATION
BS EN 60079-15:2010	EXPLOSIVE ATMOSPHERES - PART 15: EQUIPMENT PROTECTION BY TYPE OF PROTECTION 'N'
I.S. EN 60950-1:2006	INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60950-1:2005 (MOD))
I.S. EN 61984:2009	CONNECTORS - SAFETY REQUIREMENTS AND TESTS
S.R. CLC/TS 50467:2008	RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRICAL CONNECTORS, REQUIREMENTS AND TEST METHODS
UNE-EN 50521:2010	Connectors for photovoltaic systems - Safety requirements and tests
EN 62790:2015	Junction boxes for photovoltaic modules - Safety requirements and tests
UNE-EN 60950-1:2007	Information technology equipment - Safety - Part 1: General requirements
CEI EN 60947-7-4 : 2014	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 7-4: ANCILLARY EQUIPMENT - PCB TERMINAL BLOCKS FOR COPPER CONDUCTORS
12/30235292 DC : 0	BS EN 50343 - RAILWAY APPLICATIONS - ROLLING STOCK - RULES FOR INSTALLATION OF CABLING
BS EN 60947-1 : 2007	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: GENERAL RULES
UNE-EN 60947-7-4:2014	Low-voltage switchgear and controlgear - Part 7-4: Ancillary equipment - PCB terminal blocks for copper conductors
UNE-EN 60065:2015	Audio, video and similar electronic apparatus - Safety requirements
BS EN 61534-1 : 2011	POWERTRACK SYSTEMS - PART 1: GENERAL REQUIREMENTS
12/30258453 DC : 0	BS EN 62368-1 AMD - AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS
I.S. EN 60065:2014	AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY REQUIREMENTS
I.S. EN 62368-1:2014	AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS (IEC 62368-1:2014, MODIFIED)
EN 62368-1:2014/AC:2017-03	AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS (IEC 62368-1:2014, MODIFIED)
BS EN 60947-7-4:2013 (published 2013-10)	Low-voltage switchgear and controlgear Ancillary equipment. PCB terminal blocks for copper conductors
UNE-EN 62790:2015	Junction boxes for photovoltaic modules - Safety requirements and tests
I.S. EN 50343:2014	RAILWAY APPLICATIONS - ROLLING STOCK - RULES FOR INSTALLATION OF CABLING
I.S. EN 61534-1:2011	POWERTRACK SYSTEMS - PART 1: GENERAL REQUIREMENTS
BS EN 61984:2009	Connectors. Safety requirements and tests
EN 62852:2015	Connectors for DC-application in photovoltaic systems - Safety requirements and tests
BS EN 60950-1 : 2006	INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS
BS EN 50521 : 2009	CONNECTORS FOR PHOTOVOLTAIC SYSTEMS - SAFETY REQUIREMENTS AND TESTS
08/30179116 DC : DRAFT MAR 2008	BS EN 50521 - CONNECTORS FOR PHOTOVOLTAIC SYSTEMS - SAFETY REQUIREMENTS AND TESTS
CLC/TS 50467 : 2008 COR 2008	RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRICAL CONNECTORS, REQUIREMENTS AND TEST METHODS
UNE-EN 60079-15:2013	Explosive atmospheres - Part 15: Equipment protection by type of protection "n"
09/30208429 DC : 0	BS EN 50467 - RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRICAL CONNECTORS, REQUIREMENTS AND TEST METHODS
BS EN 50467:2011	Railway applications. Rolling stock. Electrical connectors, requirements and test methods
I.S. EN 62790:2015	JUNCTION BOXES FOR PHOTOVOLTAIC MODULES - SAFETY REQUIREMENTS AND TESTS
I.S. EN 50521:2008	CONNECTORS FOR PHOTOVOLTAIC SYSTEMS - SAFETY REQUIREMENTS AND TESTS
I.S. EN 60947-1:2007	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: GENERAL RULES
UNE-EN 50548:2012	Junction boxes for photovoltaic modules
NF EN 50548 : 2011 AMD 2 2014	JUNCTION BOXES FOR PHOTOVOLTAIC MODULES
PREN 50548 : DRAFT 2009	JUNCTION BOXES FOR PHOTOVOLTAIC MODULES
I.S. EN 60947-7-4:2013	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 7-4: ANCILLARY EQUIPMENT - PCB TERMINAL BLOCKS FOR COPPER CONDUCTORS (IEC 60947-7-4:2013 (EQV))
I.S. EN 61076-2-001:2011	CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-001: CIRCULAR CONNECTORS - BLANK DETAIL SPECIFICATION
EN 50548 : 2011 AMD 2 2014	JUNCTION BOXES FOR PHOTOVOLTAIC MODULES
EN 50521:2008/A1:2012	CONNECTORS FOR PHOTOVOLTAIC SYSTEMS - SAFETY REQUIREMENTS AND TESTS
EN 61984:2009	Connectors - Safety requirements and tests
HD 60269-2:2013	Low-voltage fuses - Part 2: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) - Examples of standardized systems of fuses A to K
EN 50467 : 2011	RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRICAL CONNECTORS, REQUIREMENTS AND TEST METHODS
EN 50343 : 2014 AMD 1 2017	RAILWAY APPLICATIONS - ROLLING STOCK - RULES FOR INSTALLATION OF CABLING
EN 61076-3-120 : 2016	Connectors for electronic equipment - Product requirements - Part 3-120: Rectangular connectors - Detail specification for rewirable power connectors with snap locking for rated voltage of 250 V d.c. and rated current of 30 A
EN 61076-2-001:2011	Connectors for electronic equipment - Product requirements - Part 2-001: Circular connectors - Blank detail specification
EN 60947-7-4 : 2013	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 7-4: ANCILLARY EQUIPMENT - PCB TERMINAL BLOCKS FOR COPPER CONDUCTORS (IEC 60947-7-4:2013)
EN 61076-3-118 : 2010	CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-118: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR A 4 POLE + PE POWER CONNECTOR WITH PUSH-PULL COUPLING
EN 62196-1:2014	Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 1: General requirements

Standards Referencing This Book - (Show below) - (Hide below)

IEC 60228:2004	Conductors of insulated cables
WC 8-1988	ETHYLENE-PROPYLENE-RUBBER-INSULATED WIRE AND CABLE FOR THE TRANSMISSION AND DISTRIBUTION OF ELECTRICAL ENERGY
IEC 60999-1:1999	Connecting devices - Electrical copper conductors - Safety requirements for screw-type and screwless-type clamping units - Part 1: General requirements and particular requirements for clamping units for conductors from 0,2 mm2 up to 35 mm2 (included)
ASTM B 172 : 2017 : REDLINE	Standard Specification for Rope-Lay-Stranded Copper Conductors Having Bunch-Stranded Members, for Electrical Conductors
HD 383 : S2 AMD 2	CONDUCTORS OF INSULATED CABLES - GUIDE TO THE DIMENSIONAL LIMITS OF CIRCULAR CONDUCTORS
WC 3-1992	RUBBER-INSULATED WIRE AND CABLE FOR THE TRANSMISSION AND DISTRIBUTION OF ELECTRICAL ENERGY
IEC 60228A:1982	First supplement - Conductors of insulated cables - Guide to the dimensional limits of circular conductors
EN 60999-1:2000	Connecting devices - Electrical copper conductors - Safety requirements for screw-type and screwless-type clamping units - Part 1: General requirements and particular requirements for clamping units for conductors from 0,2 mm² up to 35 mm² (included)
WC 7-1988	CROSS-LINKED-THERMOSETTING-POLYETHYLENE-INSULATED WIRE AND CABLE FOR THE TRANSMISSION AND DISTRIBUTION OF ELECTRICAL ENERGY

Categories associated with this Standard - (Show below) - (Hide below)

Sub-Categories associated with this Standard - (Show below) - (Hide below)

Sorry this product is not available in your region.

Add To Cart