EN 61249-2-19:2002
Current
The latest, up-to-date edition.
Materials for printed boards and other interconnecting structures - Part 2-19: Reinforced base materials, clad and unclad - Epoxide cross-plied linear fibreglass-reinforced laminated sheets of defined flammability (vertical burning test) copper clad
20-02-2002
FOREWORD
1 Scope
2 Normative references
3 Materials and construction
3.1 Insulating base
3.2 Metal foil
4 Internal marking
5 Electrical properties
6 Non-electrical properties of the copper-clad laminate
6.1 Appearance of the copper-clad sheet
6.2 Appearance of the unclad face
6.3 Thickness
6.4 Bow and twist
6.5 Properties related to the copper foil bond
6.6 Punching and machining
6.7 Dimensional stability
6.8 Sheet sizes
6.9 Cut panels
7 Non-electrical properties of the base material after
complete removal of the copper foil
7.1 Appearance of the base material
7.2 Flexural strength
7.3 Flammability
7.4 Water absorption
7.5 Measling
7.6 Glass transition temperature and cure factor
8 Quality assurance
8.1 Quality system
8.2 Responsibility for inspection
8.3 Qualification inspection
8.4 Quality conformance inspection
8.5 Certificate of conformance
8.6 Safety data sheet
9 Packaging and marking
Annex A (informative) Conversion table for test method
numbers
Annex B (informative) Guide for design and development
Annex ZA (normative) Normative references to international
publications with their corresponding
European publications
Gives requirements for properties of epoxide linear fibreglass reinforced copper-clad laminated sheet, of defined flammability, with a tickness range from 0,05 mm to 0,40 mm.
| Committee |
CLC/SR 91
|
| DocumentType |
Standard
|
| PublisherName |
European Committee for Standards - Electrical
|
| Status |
Current
|
| Standards | Relationship |
| DIN EN 61249-2-19:2002-09 | Identical |
| NBN EN 61249 2-19 : 2002 | Identical |
| UNE-EN 61249-2-19:2003 | Identical |
| BS EN 61249-2-19:2002 | Identical |
| IEC 61249-2-19:2001 | Identical |
| NEN EN IEC 61249-2-19 : 2002 | Identical |
| NF EN 61249-2-19 : 2002 | Identical |
| PN EN 61249-2-19 : 2003 | Identical |
| I.S. EN 61249-2-19:2002 | Identical |
| BS EN 60077-5:2003 | Identical |
| EN 61249-5-1:1996 | Materials for interconnection structures - Part 5: Sectional specification set for conductive foils and films with or without coatings - Section 1: Copper foils (for the manufacture of copper-clad base materials) |
| ISO 11014-1:1994 | Safety data sheet for chemical products Part 1: Content and order of sections |
| IEC 61249-5-1:1995 | Materials for interconnection structures - Part 5: Sectional specification set for conductive foils and films with and without coatings - Section 1: Copper foils (for the manufacture of copper-clad base materials) |
| ISO 14001:2015 | Environmental management systems — Requirements with guidance for use |
| EN ISO 14001:2015 | Environmental management systems - Requirements with guidance for use (ISO 14001:2015) |
| IEC 61189-2:2006 | Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 2: Test methods for materials for interconnection structures |
| EN 61189-2:2006 | Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 2: Test methods for materials for interconnection structures |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.