EN 61249-2-6:2003/corrigendum:2005

Current

Current The latest, up-to-date edition.

MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-6: REINFORCED BASE MATERIALS, CLAD AND UNCLAD - BROMINATED EPOXIDE NON-WOVEN/WOVEN E-GLASS REINFORCED LAMINATED SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD

Available format(s):

Language(s):

Published date: 26-07-2005

Publisher: European Committee for Standards - Electrical

Pure ENs are not available for sale, please purchase a suitable national adoption

Table of Contents - (Show below) - (Hide below)

1 Scope
2 Normative references
3 Materials and construction
   3.1 Resin system
   3.2 Reinforcement
   3.3 Metal foil
4 Internal marking
5 Electrical properties
6 Non-electrical properties of the copper clad laminate
   6.1 Appearance of the copper clad sheet
   6.2 Appearance of the unclad face
   6.3 Laminate thickness
   6.4 Bow and twist
   6.5 Properties related to the copper foil bond
   6.6 Punching and machining
   6.7 Dimensional stability
   6.8 Sheet size
   6.9 Cut panels
7 Non-electrical properties of the base material after complete
   removal of the copper foil
   7.1 Appearance of the dielectric base material
   7.2 Flexural strength
   7.3 Flammability
   7.4 Water absorption
   7.5 Measling
   7.6 Glass transition temperature and cure factor
8 Quality assurance
   8.1 Quality system
   8.2 Responsibility for inspection
   8.3 Qualification inspection
   8.4 Quality conformance inspection
   8.5 Certificate of conformance
   8.6 Safety data sheet
9 Packaging and marking
10 Ordering information
Annex A (informative) Engineering information
Annex B (informative) Common laminate constructions
Annex C (informative) Guideline for qualification and
                       conformance inspection
Annex ZA (normative) Normative references to international
                       publications with their corresponding
                       European publications
Bibliography

Abstract - (Show below) - (Hide below)

Specifies requirements for properties of brominated epoxide non-woven/woven reinforced E-glass laminated sheets of defined flammability, copper-clad in thicknesses of 0,80 mm up to 1,70 mm.

General Product Information - (Show below) - (Hide below)

Committee	SR 91
Document Type	Standard
ISBN
Pages
Published
Publisher	European Committee for Standards - Electrical
Status	Current

National Adoptions - (Show below) - (Hide below)

Equivalent Standard(s)	Relationship
CEI EN 61249-2-6 : 2005	Identical
NEN EN IEC 61249-2-6 : 2004 C11 2005	Identical
BS EN 61249-2-6:2003	Identical
UNE-EN 61249-2-6:2005	Identical
DIN EN 61249-2-6:2004-06	Identical
PN EN 61249-2-6 : 2004 AC 2006	Identical
IEC 61249-2-6:2003	Identical
NBN EN 61249 2-6 : 2005	Identical
UNE-EN 61249-2-6:2005 CORR:2005	Identical
I.S. EN 61249-2-6:2005/AC:2005	Identical
NF EN 61249-2-6 : 2004	Identical

Standards Referenced By This Book - (Show below) - (Hide below)

I.S. EN 62326-20:2016	PRINTED BOARDS - PART 20: PRINTED CIRCUIT BOARDS FOR HIGHBRIGHTNESS LEDS
BS EN 62326-20:2016	Printed boards Printed circuit boards for high-brightness LEDs
EN 62326-20:2016	Printed boards - Part 20: Printed circuit boards for high-brightness LEDs

Standards Referencing This Book - (Show below) - (Hide below)

EN 61249-5-1:1996	Materials for interconnection structures - Part 5: Sectional specification set for conductive foils and films with or without coatings - Section 1: Copper foils (for the manufacture of copper-clad base materials)
ISO 11014-1:1994	Safety data sheet for chemical products Part 1: Content and order of sections
IEC 61249-5-1:1995	Materials for interconnection structures - Part 5: Sectional specification set for conductive foils and films with and without coatings - Section 1: Copper foils (for the manufacture of copper-clad base materials)
ISO 14001:2015	Environmental management systems — Requirements with guidance for use
IEC 60194:2015	Printed board design, manufacture and assembly - Terms and definitions
EN ISO 14001:2015	Environmental management systems - Requirements with guidance for use (ISO 14001:2015)
ISO 9000:2015	Quality management systems — Fundamentals and vocabulary
IEC 61189-2:2006	Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 2: Test methods for materials for interconnection structures
EN ISO 9000:2015	Quality management systems - Fundamentals and vocabulary (ISO 9000:2015)
EN 61189-2:2006	Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 2: Test methods for materials for interconnection structures

Categories associated with this Standard - (Show below) - (Hide below)

Sub-Categories associated with this Standard - (Show below) - (Hide below)

Sorry this product is not available in your region.

Add To Cart