EN 61300-2-42:2014
Current
Current
The latest, up-to-date edition.
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-42: Tests - Static side load for strain relief
Published date
16-05-2014
Sorry this product is not available in your region.
FOREWORD
1 Scope
2 Normative references
3 General description
4 Apparatus
5 Procedure
6 Severity
7 Details to be specified
Annex ZA (normative) - Normative references to
International publications with their
corresponding European publications
IEC 61300-2-42:2014 specifies a test to determine the influence of a side load applied to a cord assembled with a strain relief. The intention is to simulate a static load, due to a length of fibre cable, which would typically be experienced during service. Components should withstand side loads during optical transmission without degradation of the optical performance. Besides a boot, any feature that controls the bending radius of the fibre can be considered as strain relief. This third edition cancels and replaces the second edition published in 2005 and constitutes a technical revision. This edition includes the following significant technical change with respect to the previous edition: modification of the severity according to cable configurations. Keywords: side load, static load, optical performance, strain relief
| Committee |
CLC/TC 86BXA
|
| DocumentType |
Standard
|
| PublisherName |
European Committee for Standards - Electrical
|
| Status |
Current
|
| Standards | Relationship |
| IEC 61300-2-42:2014 | Identical |
| NF EN 61300-2-42 : 2014 | Identical |
| NBN EN 61300 2-42 : 2014 | Identical |
| NEN EN IEC 61300-2-42 : 2014 | Identical |
| I.S. EN 61300-2-42:2014 | Identical |
| PN EN 61300-2-42 : 2014 | Identical |
| SN EN 61300-2-42 : 1998 | Identical |
| UNE-EN 61300-2-42:2015 | Identical |
| BS EN 61300-2-42:2014 | Identical |
| CEI EN 61300-2-42 : 2014 | Identical |
| DIN EN 61300-2-42:2014-10 | Identical |
| CEI EN 50377-8-8 : 2009 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 8-8: LSH-APC SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE, WITH FULL ZIRCONIA FERRULE CATEGORY U |
| CEI EN 50378-3-1 : 2008 | PASSIVE COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 3-1: TYPE: 100/200 GHZ DWDM MODULE TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLE MODE FIBRE |
| CEI EN 50377-8-3 : 2008 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 8-3: LSH-PC SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE, COMPOSITE FERRULE CATEGORY C |
| CEI EN 50377-8-13 : 2012 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 8-13: TYPE LSH-PC SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE WITH TITANIUM COMPOSITE FERRULE FOR CATEGORY U |
| BS EN 50377-5-1:2003 | Connectors sets and interconnect components to be used in optical fibre communication systems. Product specifications. Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications Type EC terminated on IEC 60793-2 category B.1.1 singlemode fibre |
| BS EN 61753-381-6:2016 | Fibre optic interconnecting devices and passive components. Performance standard Cyclic arrayed waveguide grating. Category O (uncontrolled environment) |
| CEI EN 61753-021-2 : 2010 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 021-2: GRADE C/3 SINGLE-MODE FIBRE OPTIC CONNECTORS FOR CATEGORY C - CONTROLLED ENVIRONMENT |
| CEI EN 61753-2-1 : 2001 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 2-1: FIBRE OPTIC CONNECTORS TERMINATED ON SINGLE-MODE FIBRE FOR CATEGORY U - UNCONTROLLED ENVIRONMENT |
| BS EN 61753-052-6:2016 | Fibre optic interconnecting devices and passive components. Performance standard Single-mode fibre non-connectorized fixed attenuator. Category O in outside plant environment |
| 05/30128969 DC : 0 | EN 50377-4-4 - CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 4-4: TYPE SC-PC SIMPLEX TERMINATED ON IEC 60793-2 CATEGORY B1.1 SINGLEMODE FIBRE |
| BS EN 61753-053-2:2014 | Fibre optic interconnecting devices and passive components. Performance standard Non-connectorized single-mode fibre, electrically controlled, variable optical attenuator for category C. Controlled environments |
| I.S. EN 61753-053-2:2014 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 053-2: NON-CONNECTORIZED SINGLE-MODE FIBRE, ELECTRICALLY CONTROLLED, VARIABLE OPTICAL ATTENUATOR FOR CATEGORY C - CONTROLLED ENVIRONMENTS |
| BS EN 61753-381-2:2016 | Fibre optic interconnecting devices and passive components. Performance standard Cyclic arrayed waveguide grating. Category C (controlled environment) |
| BS EN 50377-16-1:2011 | Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications Type LF3 APC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre with titanium composite ferrule for category C |
| UNE-EN 50377-4-2:2015 | Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 4-2: Type SC/APC simplex 8° terminated on IEC 60793-2-50 of types B1.1 and B1.3 singlemode fibre, with full zirconia ferrule category U |
| CEI EN 50377-14-1 : 2012 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 14-1: CORDS WITH IEC 60793-2-50 SINGLEMODE CATEGORY B1.1 AND B1.3 FIBRE FOR CATEGORY C |
| CEI EN 61753-021-3 : 2014 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 021-3: SINGLE-MODE FIBRE OPTIC CONNECTORS FOR CATEGORY U - UNCONTROLLED ENVIRONMENT |
| 17/30347862 DC : 0 | BS EN 50377-14-1 - CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 14-1: SIMPLEX AND DUPLEX CORDS MADE FROM SIMPLEX PLUGS WITH CYLINDRICAL FERRULES, USING EN 60793-2-50 SINGLEMODE B1 OR B6 FIBRE FOR CATEGORY C ACCORDING TO EN 61753-1 |
| BS EN 61753-101-2:2006 | Fibre optic interconnecting devices and passive components performance standard Fibre management systems for category C. Controlled environment |
| BS EN 50377-9-1:2003 | Connectors sets and interconnect components to be used in optical fibre communication systems. Product specifications Type MT-RJ terminated on IEC 60793-2 category A1a and A1b multimode fibre |
| BS EN 61753-089-2:2013 | Fibre optic interconnecting devices and passive components. Performance standard Non-connectorized single-mode bidirectional OTDR monitoring WWDM devices for category C. Controlled environment |
| BS EN 61753-092-6:2007 | Fibre optic interconnecting devices and passive components performance standard Non-connectorized single-mode circulators for category O. Uncontrolled environment and sequential test |
| BS EN 62664-1-1:2013 | Fibre optic interconnecting devices and passive components. Fibre optic connector product specifications LC-PC duplex multimode connectors terminated on IEC 60793-2-10 category A1a fibre |
| 08/30189758 DC : DRAFT SEP 2008 | BS EN 50377-13-3 - CONNECTORS SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 13-3: TYPE LX.5-APC DUPLEX TERMINATED ON EN 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE, WITH FULL ZIRCONIA FERRULE CATEGORY U |
| I.S. EN 50377-16-1:2011 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 16-1: TYPE LF3 APC SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE WITH TITANIUM COMPOSITE FERRULE FOR CATEGORY C |
| CEI EN 62664-1-1 : 2014 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CONNECTOR PRODUCT SPECIFICATIONS - PART 1-1: LC-PC DUPLEX MULTI MODE CONNECTORS TERMINATED ON IEC 60793-2 CATEGORY A1A FIBRE |
| NF EN 50377-15-1 : 2011 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 15-1: TYPE MPO WITH 12-FIBRE PPS FERRULES TERMINATED ON IEC 60793-2 CATEGORY A1A MULTIMODE FIBRE FOR 50/125 MICRON MULTIMODE FIBRE |
| BS EN 61753-031-2:2014 | Fibre optic interconnecting devices and passive components. Performance standard Non-connectorized single-mode 1xN and 2xN non-wavelength-selective branching devices for Category C. Controlled environment |
| 08/30195624 DC : 0 | BS EN 50377-8-11 - CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 8-11: TYPE LSH-PC SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLE MODE FIBRE WITH TITANIUM COMPOSITE FERRULE FOR CATEGORY C |
| 07/30163785 DC : 0 | BS EN 50377-3-1 - CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 3-1: TYPE SG TERMINATED ON IEC 60793-2-10 CATEGORY A1A, A1B OR EQUIVALENT MULTIMODE FIBRE FOR CATEGORY C |
| I.S. EN 61753-031-3:2015 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 031-3: NON-CONNECTORIZED SINGLEMODE 1N AND 2N NON-WAVELENGTH-SELECTIVE BRANCHING DEVICES FOR CATEGORY U - UNCONTROLLED ENVIRONMENT |
| 08/30195627 DC : 0 | BS EN 50377-8-12 - CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 8-12: TYPE LSH-APC SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLE MODE FIBRE WITH TITANIUM COMPOSITE FERRULE FOR CATEGORY U |
| 06/30156211 DC : DRAFT SEP 2006 | BS EN 50377-10-1 - CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 10-1: TYPE MU-PC SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE, WITH FULL ZIRCONIA FERRULE CATEGORY C |
| CEI EN 61753-101-3 : 2010 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 101-3: FIBRE MANAGEMENT SYSTEMS FOR CATEGORY U - UNCONTROLLED ENVIRONMENT |
| 03/311586 DC : DRAFT JULY 2003 | EN 50377-6-2 - CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 6-2: TYPE SC-RJ TERMINATED ON IEC 60793-2 CATEGORY B1.1 SINGLEMODE FIBRE |
| 06/30154747 DC : 0 | EN 50377-2-2 - PRODUCT SPECIFICATION FOR CONNECTORS ADAPTORS AND PATCHCORDS TO BE USED IN SINGLE MODE OPTICAL FIBRE COMMUNICATION SYSTEMS - PART 2-2 - TYPE FC/APC 8 TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLE MODE FIBRE, ZIRCONIA FERRULE, FOR CATEGORY C |
| BS EN 61753-083-2:2008 | Fibre optic interconnecting devices and passive components performance standard Non-connectorised single-mode fibre optic C-band/L-band WDM devices for category C. Controlled environment |
| 06/30156214 DC : DRAFT SEP 2006 | BS EN 50377-8-9 - CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 8-9: LSH-PC SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE, WITH FULL ZIRCONIA FERRULE CATEGORY U |
| 08/30195621 DC : 0 | BS EN 50377-8-10 - CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 8-10: TYPE LSH-APC SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLE MODE FIBRE WITH TITANIUM COMPOSITE FERRULE FOR CATEGORY C |
| CEI EN 50378-3-2 : 2008 | PASSIVE COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 3-2: TYPE 4/8 CHANNEL CWDM MODULE TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLE MODE FIBRE |
| CEI EN 50377-13-3 : 2012 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 13-3: TYPE LX.5-APC DUPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE, WITH FULL ZIRCONIA FERRULE CATEGORY U |
| I.S. EN 62005-9-1:2015 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - RELIABILITY - PART 9-1: QUALIFICATION OF PASSIVE OPTICAL COMPONENTS |
| I.S. EN 50377-7-1:2004 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 7-1: TYPE LC-PC DUPLEX TERMINATED ON IEC 60793-2 CATEGORY A1A AND A1B MULTIMODE FIBRE |
| I.S. EN 61753-056-2:2013 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 056-2: SINGLE MODE FIBRE PIGTAILED STYLE OPTICAL FUSE FOR CATEGORY C - CONTROLLED ENVIRONMENT (IEC 61753-056-2:2012 (EQV)) |
| I.S. EN 61753-041-2:2014 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 041-2: NON-CONNECTORIZED SINGLE-MODE OTDR REFLECTING DEVICE FOR CATEGORY C - CONTROLLED ENVIRONMENT |
| I.S. EN 61753-052-6:2016 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 052-6: SINGLE-MODE FIBRE NON-CONNECTORIZED FIXED ATTENUATOR - CATEGORY O IN OUTSIDE PLANT ENVIRONMENT |
| I.S. EN 61753-141-2:2011 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 141-2: FIBRE OPTIC PASSIVE CHROMATIC DISPERSION COMPENSATOR USING SINGLE-MODE DISPERSION COMPENSATING FIBRE FOR CATEGORY C - CONTROLLED ENVIRONMENTS |
| I.S. EN 62149-1:2012 | FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES - PERFORMANCE STANDARDS - PART 1: GENERAL AND GUIDANCE (IEC 61753-059-2:201X (86B/3338/CDV) (EQV) + IEC 62149-1:2011 (EQV)) |
| I.S. EN 61753-022-2:2013 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 022-2: FIBRE OPTIC CONNECTORS TERMINATED ON MULTIMODE FIBRE FOR CATEGORY C - CONTROLLED ENVIRONMENT (IEC 61753-022-2:2012 (EQV)) |
| I.S. EN 50377-8-3:2007 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 8-3: LSH-PC SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE, COMPOSITE FERRULE CATEGORY C |
| CEI EN 50377-3-1 : 2009 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 3-1: TYPE SG TERMINATED ON IEC 60793-2-10 CATEGORY A1A, A1B OR EQUIVALENT MULTIMODE FIBRE FOR CATEGORY C |
| BS EN 50377-3-1:2008 | Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications Type SG terminated on IEC 60793-2-10 category A1a, A1b or equivalent multimode fibre for category C |
| I.S. EN 61753-091-2:2013 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 091-2: NON-CONNECTORIZED SINGLE-MODE FIBRE OPTIC PIGTAILED CIRCULATORS FOR CATEGORY C - CONTROLLED ENVIRONMENT (IEC 61753-091-2:2012 (EQV)) |
| I.S. EN 50377-4-2:2011 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 4-2: TYPE SC/APC SIMPLEX 8 DEGREES TERMINATED ON IEC 60793-2-50 OF TYPES B1.1 AND B1.3 SINGLEMODE FIBRE, WITH FULL ZIRCONIA FERRULE CATEGORY U |
| NF EN 50377-2-2 : 2011 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 2-2: FC/APC 8 TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE, WITH FULL ZIRCONIA FERRULE, CATEGORY C |
| UNE-EN 62005-9-1:2016 | Fibre optic interconnecting devices and passive components - Reliability - Part 9-1: Qualification of passive optical components |
| EN 50377-13-2:2011 | Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 13-2: Type LX.5-PC DUPLEX terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, with full zirconia ferrule category U |
| EN 50377-7-1:2004 | Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 7-1: Type LC-PC duplex terminated on IEC 60793-2 category A1a and A1b multimode fibre |
| EN 61753-021-2:2008 | Fibre optic interconnecting devices and passive components performance standard - Part 021-2: Grade C/3 single-mode fibre optic connectors for category C - Controlled environment |
| EN 61753-052-6:2016 | Fibre optic interconnecting devices and passive components - Performance standard - Part 052-6: Single-mode fibre non-connectorized fixed attenuator - Category O in outside plant environment |
| EN 50377-9-2:2004 | Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 9-2: Type MT-RJ terminated on IEC 60793-2 category B1.1 singlemode fibre |
| EN 50377-2-2:2009 | Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 2-2: FC/APC 8 terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, with full zirconia ferrule, category C |
| EN 50377-8-4:2007 | Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 8-4: LSH-APC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, composite ferrule category U |
| EN 61753-143-2:2013 | Fibre optic interconnecting devices and passive components - Performance standard - Part 143-2: Optical passive VIPA-based dispersion compensator of single-mode fibre transmission for category C - Controlled environment |
| EN 62149-1:2012 | Fibre optic active components and devices - Performance standards - Part 1: General and guidance |
| EN 50377-4-2:2011 | Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 4-2: Type SC/APC simplex 8° terminated on IEC 60793-2-50 of types B1.1 and B1.3 singlemode fibre, with full zirconia ferrule category U |
| EN 50377-8-10:2010 | Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 8-10: Type LSH-APC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre with titanium composite ferrule for category C |
| EN 61753-087-6:2012 | Fibre optic interconnecting devices and passive components - Performance standard - Part 087-6: Non-connectorised single-mode bidirectional 1310 nm upstream and 1490 nm downstream WWDM devices for category O - Uncontrolled environment |
| EN 61753-031-3:2015 | Fibre optic interconnecting devices and passive components - Performance standard - Part 031-3: Non-connectorized single-mode 1×N and 2×N non-wavelength-selective branching devices for Category U - Uncontrolled environment |
| EN 61753-092-6:2007/corrigendum:2008 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 092-6: NON-CONNECTORIZED SINGLE-MODE CIRCULATORS FOR CATEGORY O - UNCONTROLLED ENVIRONMENT AND SEQUENTIAL TEST |
| EN 61753-141-2:2011 | Fibre optic interconnecting devices and passive components - Performance standard - Part 141-2: Fibre optic passive chromatic dispersion compensator using single-mode dispersion compensating fibre for category C - Controlled environments |
| EN 61753-056-2:2013 | Fibre optic interconnecting devices and passive components - Performance standard - Part 056-2: Single mode fibre pigtailed style optical fuse for category C - Controlled environment |
| EN 50377-8-9:2007 | Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 8-9: LSH-PC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, with full zirconia ferrule category U |
| EN 61753-053-3:2004 | Fibre optic interconnecting devices and passive components performance standard - Part 053-3: Continuously variable attenuators for category U - Uncontrolled environment |
| EN 61753-121-2:2017 | Fibre optic interconnecting devices and passive components - Performance standard - Part 121-2: Simplex and duplex cords with single-mode fibre and cylindrical ferrule connectors for category C - Controlled environment |
| EN 61753-021-3:2013 | Fibre optic interconnecting devices and passive components - Performance standard - Part 021-3: Single-mode fibre optic connectors for category U - Uncontrolled environment |
| EN 61753-031-2:2014 | Fibre optic interconnecting devices and passive components - Performance standard - Part 031-2: Non-connectorized single-mode 1×N and 2×N non-wavelength-selective branching devices for Category C - Controlled environment |
| EN 61753-382-2:2016 | Fibre optic interconnecting devices and passive components - Performance standard - Part 382-2: Non-connectorized single-mode bidirectional G-PON-NGA WWDM devices for category C - Controlled environment |
| EN 61753-084-2:2008 | Fibre optic interconnecting devices and passive components performance standard - Part 084-2: Non connectorised single-mode 980/1550 nm WWDM devices for category C - Controlled environment |
| EN 61753-031-6:2014 | Fibre optic interconnecting devices and passive components - Performance standard - Part 031-6: Non-connectorized single-mode 1xN and 2xN non-wavelength-selective branching devices for Category O - Uncontrolled environment |
| EN 61753-101-3:2008 | Fibre optic interconnecting devices and passive components performance standard - Part 101-3: Fibre management systems for Category U - Uncontrolled environment |
| EN 50377-13-3:2011 | Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 13-3: Type LX.5-APC DUPLEX terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, with full zirconia ferrule category U |
| EN 61753-091-2:2013 | Fibre optic interconnecting devices and passive components - Performance standard - Part 091-2: Non-connectorized single-mode fibre optic pigtailed circulators for category C - Controlled environment |
| EN 50377-5-1:2003 | Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 5-1: Type EC terminated on IEC 60793-2 category B1.1 singlemode fibre |
| EN 61753-022-2:2013 | Fibre optic interconnecting devices and passive components - Performance standard - Part 022-2: Fibre optic connectors terminated on multimode fibre for category C - Controlled environment |
| EN 61753-052-3:2016 | Fibre optic interconnecting devices and passive components - Performance standard - Part 052-3: Single-mode fibre non-connectorized fixed attenuator - Category U in uncontrolled environment |
| EN 61753-086-2:2009 | Fibre optic interconnecting devices and passive components performance standard - Part 086-2: Non-connectorised single-mode bidirectional 1490 / 1550 nm downstream 1310 nm upstream WWDM devices for category C - Controlled environment |
| EN 50377-10-2:2005 | Connectors sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 10-2: MU-APC singlemode terminated on IEC 60793-2 category B1 fibre |
| EN 50377-7-3:2004 | Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 7-3: Type LC-APC duplex terminated on IEC 60793-2 category B1.1 singlemode fibre |
| EN 50377-8-7:2007 | Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 8-7: LSH-PC terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, with full zirconia ferrule category C |
| EN 50377-15-1:2011 | Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 15-1: Type MPO with 12-fibre PPS ferrules terminated on IEC 60793-2 category A1a multimode fibre for 50/125 micron multimode fibre |
| CEI EN 61753-092-6 : 2010 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 092-6: NON-CONNECTORIZED SINGLE-MODE CIRCULATORS FOR CATEGORY O - UNCONTROLLED ENVIRONMENT AND SEQUENTIAL TEST |
| BS EN 61753-071-2:2014 | Fibre optic interconnecting devices and passive components. Performance standard Non-connectorised single-mode fibre optic 1 x 2 and 2 x 2 spatial switches for category C. Controlled environments |
| CEI EN 50377-8-9 : 2009 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 8-9: LSH-PC SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE, WITH FULL ZIRCONIA FERRULE CATEGORY U |
| 08/30190093 DC : DRAFT SEP 2008 | BS EN 50377-7-4 - CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 7-4: LC-PC SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLE MODE FIBRE WITH FULL ZIRCONIA FERRULE FOR CATEGORY C |
| I.S. EN 50377-10-1:2007 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 10-1: TYPE MU-PC SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE, WITH FULL ZIRCONIA FERRULE CATEGORY C |
| I.S. EN 50377-2-2:2009 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 2-2: FC/APC 8 TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE, WITH FULL ZIRCONIA FERRULE, CATEGORY C |
| 02/210340 DC : DRAFT JAN 2003 | EN 50377-9-2 - CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 9-2: TYPE MT-RJ TERMINATED ON IEC 60793-2 CATEGORY B1.1 SINGLEMODE FIBRE |
| BS EN 62005-9-1:2015 | Fibre optic interconnecting devices and passive components. Reliability Qualification of passive optical components |
| BS EN 50377-9-2:2004 | Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications Type MT-RJ terminated on IEC 60793-2 category B1.1 singlemode fibre |
| BS EN 50377-8-12:2010 | Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications Type LSH-APC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre with titanium composite ferrule for category U |
| BS EN 61753-382-2:2016 | Fibre optic interconnecting devices and passive components. Performance standard Non-connectorized single-mode bidirectional G-PON-NGA WWDM devices for category C. Controlled environment |
| BS EN 61753-143-2:2013 | Fibre optic interconnecting devices and passive components. Performance standard Optical passive VIPA-based dispersion compensator of single-mode fibre transmission for category C. Controlled environment |
| BS EN 61753-101-3:2009 | Fibre optic interconnecting devices and passive components performance standard Fibre management systems for category U. Uncontrolled environment |
| BS EN 61753-053-3:2004 | Fibre optic interconnecting devices and passive components performance standard Continuously variable attenuators for category U - Uncontrolled environment |
| BS EN 61753-041-2:2014 | Fibre optic interconnecting devices and passive components. Performance standard Non-connectorized single-mode OTDR reflecting device for category C. Controlled environment |
| BS EN 50377-4-4:2011 | Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications Type SC-PC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, with full zirconia ferrule category U |
| BS EN 50377-8-9:2007 | Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications LSH-PC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, with full zirconia ferrule category U |
| BS EN 50377-4-2:2011 | Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications Type SC/APC simplex 8° terminated on IEC 60793-2-50 of types B1.1 and B1.3 singlemode fibre, with full zirconia ferrule category U |
| BS EN 50377-10-1:2007 | Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications Type MU-PC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, with full zirconia ferrule category C |
| BS EN 61753-031-3:2015 | Fibre optic interconnecting devices and passive components. Performance standard Non-connectorized single-mode 1×N and 2×N non-wavelength-selective branching devices for Category U. Uncontrolled environment |
| BS EN 50377-14-1:2011 | Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications Cords with IEC 60793-2-50 singlemode category B1.1 and B1.3 fibre for category C |
| CEI EN 61753-087-2 : 2012 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 087-2: NON-CONNECTORISED SINGLE-MODE BIDIRECTIONAL 1310 NM UPSTREAM AND 1490 NM DOWNSTREAM WWDM DEVICES FOR CATEGORY C - CONTROLLED ENVIRONMENT |
| 08/30189753 DC : DRAFT SEP 2008 | BS EN 50377-13-2 - CONNECTORS SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 13-2: TYPE LX.5-PC DUPLEX TERMINATED ON EN 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE, WITH FULL ZIRCONIA FERRULE CATEGORY U |
| CEI EN 61753-086-6 : 2012 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 086-6: NON-CONNECTORISED SINGLE-MODE BIDIRECTIONAL 1490/1550 NM DOWNSTREAM AND 1310 NM UPSTREAM WWDM DEVICES FOR CATEGORY O - UNCONTROLLED ENVIRONMENT |
| CEI EN 61753-091-2 : 2013 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 091-2: NON-CONNECTORISED SINGLE-MODE FIBRE OPTIC PIGTAILED CIRCULATORS FOR CATEGORY C - CONTROLLED ENVIRONMENT |
| CEI EN 50377-2-2 : 2010 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 2-2: FC/APC 8 TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE, WITH FULL ZIRCONIA FERRULE, CATEGORY C |
| CEI EN 61753-1 : 2009 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 1: GENERAL AND GUIDANCE FOR PERFORMANCE STANDARDS |
| CEI EN 61753-121-2 : 2012 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARDS - PART 121-2: SIMPLEX AND DUPLEX CORDS WITH SINGLEMODE FIBRE AND CYLINDRICAL FERRULE CONNECTORS FOR CATEGORY C - CONTROLLED ENVIRONMENT |
| I.S. EN 61753-2-1:2000 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 2-1: FIBRE OPTIC CONNECTORS TERMINATED ON SINGLE-MODE FIBRE FOR CATEGORY U - UNCONTROLLED ENVIRONMENT |
| I.S. EN 61753-086-2:2009 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 086-2: NON-CONNECTORISED SINGLE-MODE BIDIRECTIONAL 1490/1550 NM DOWNSTREAM 1310 NM UPSTREAM WWDM DEVICES FOR CATEGORY C - CONTROLLED ENVIRONMENT |
| I.S. EN 61753-071-2:2014 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 071-2: NON-CONNECTORIZED SINGLE-MODE FIBRE OPTIC 1 X 2 AND 2 X 2 SPATIAL SWITCHES FOR CATEGORY C - CONTROLLED ENVIRONMENTS |
| CEI EN 61753-083-2 : 2010 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 083-2: NON-CONNECTORISED SINGLE-MODE FIBRE OPTIC C-BAND/L-BAND WDM DEVICES FOR CATEGORY C - CONTROLLED ENVIRONMENT |
| I.S. EN 50377-7-3:2004 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 7-3: TYPE LC-APC DUPLEX TERMINATED ON IEC 60793-2 CATEGORY B1.1 SINGLEMODE FIBRE |
| I.S. EN 61753-031-2:2014 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 031-2: NON-CONNECTORIZED SINGLE-MODE 1XN AND 2XN NON-WAVELENGTH-SELECTIVE BRANCHING DEVICES FOR CATEGORY C - CONTROLLED ENVIRONMENT |
| I.S. EN 50377-8-6:2007 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 8-6: LSH-HR SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE, WITH FULL ZIRCONIA FERRULE CATEGORY C |
| CEI EN 50377-8-4 : 2008 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 8-4: LSH-APC SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE, COMPOSITE FERRULE CATEGORY U |
| I.S. EN 61753-087-6:2012 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 087-6: NON-CONNECTORISED SINGLE-MODE BIDIRECTIONAL 1310 NM UPSTREAM AND 1490 NM DOWNSTREAM WWDM DEVICES FOR CATEGORY O - UNCONTROLLED ENVIRONMENT (IEC 61753-087-6:2012 (EQV)) |
| I.S. EN 61753-1:2007 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 1: GENERAL AND GUIDANCE FOR PERFORMANCE STANDARDS |
| I.S. EN 62664-1-1:2013 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CONNECTOR PRODUCT SPECIFICATIONS - PART 1-1: LC-PC DUPLEX MULTIMODE CONNECTORS TERMINATED ON IEC 60793-2-10 CATEGORY A1A FIBRE (IEC 62664-1-1:2013 (EQV)) |
| CEI EN 61753-143-2 : 2013 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 143-2: OPTICAL PASSIVE VIPA-BASED DISPERSION COMPENSATOR OF SINGLE-MODE FIBRE TRANSMISSION FOR CATEGORY C - CONTROLLED ENVIRONMENTS |
| CEI EN 50377-8-6 : 2009 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 8-6: LSH-HR SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE, WITH FULL ZIRCONIA FERRULE CATEGORY C |
| CEI EN 61753-062-6 : 2009 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 062-6: NON-CONNECTORIZED SINGLE-MODE FIBRE OPTIC PIGTAILED ISOLATORS FOR CATEGORY O - UNCONTROLLED ENVIRONMENT AND SEQUENTIAL TEST |
| CEI EN 61753-121-3 : 2012 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARDS - PART 121-3: SIMPLEX AND DUPLEX CORDS WITH SINGLEMODE FIBRE AND CYLINDRICAL FERRULE CONNECTORS FOR CATEGORY U - UNCONTROLLED ENVIRONMENT |
| 08/30195630 DC : 0 | BS EN 50377-8-13 - CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 8-13: TYPE LSH-PC SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLE MODE FIBRE WITH TITANIUM COMPOSITE FERRULE FOR CATEGORY U |
| I.S. EN 61753-052-3:2016 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 052-3: SINGLE-MODE FIBRE NONCONNECTORIZED FIXED ATTENUATOR - CATEGORY U IN UNCONTROLLED ENVIRONMENT |
| NF EN 50377-8-12 : 2011 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 8-12: TYPE LSH-APC SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE WITH TITANIUM COMPOSITE FERRULE FOR CATEGORY U |
| BS EN 62343-2:2014 | Dynamic modules Reliability qualification |
| CEI EN 50377-16-1 : 2012 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 16-1: TYPE LF3 APC SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLE MODE FIBRE WITH TITANIUM COMPOSITE FERRULE FOR CATEGORY C |
| BS EN 61753-081-2:2014 | Fibre optic interconnecting devices and passive components. Performance standard Non-connectorized single-mode fibre optic middle-scale 1 x N DWDM devices for category C. Controlled environments |
| BS EN 50377-8-6:2007 | Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications LSH-HR simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, with full zirconia ferrule category C |
| 02/210337 DC : DRAFT JAN 2003 | EN 50377-7-2 - CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 7-2: LC-PC DUPLEX TERMINATED ON IEC 60793-2 CATEGORY B1.1 SINGLEMODE FIBRE |
| I.S. EN 50377-9-1:2003 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 9-1: TYPE MT-RJ TERMINATED ON IEC 60793-2 CATEGORY A1A AND A1B MULTIMODE FIBRE |
| BS EN 61753-086-2:2009 | Fibre optic interconnecting devices and passive components performance standard Non-connectorised single-mode bidirectional 1490 / 1550 nm downstream 1310 nm upstream WWDM devices for category C. Controlled environment |
| BS EN 50377-8-8:2007 | Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications LSH-APC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, with full zirconia ferrule category U |
| BS EN 50377-13-3:2011 | Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications Type LX.5-APC DUPLEX terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, with full zirconia ferrule category U |
| 02/210339 DC : DRAFT JAN 2003 | EN 50377-7-3 - CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 7-3: TYPE LC-APC DUPLEX TERMINATED ON IEC 60793-2 CATEGORY B1.1 SINGLEMODE FIBRE |
| 02/210338 DC : DRAFT JAN 2003 | EN 50377-7-1 - CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 7-1: TYPE LC-PC DUPLEX TERMINATED ON IEC 60793-2 CATEGORY A1A AND A1B MULTIMODE FIBRE |
| I.S. EN 50173-1:2011 | INFORMATION TECHNOLOGY - GENERIC CABLING SYSTEMS - PART 1: GENERAL REQUIREMENTS |
| BS EN 50377-7-2:2004 | Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications LC-PC duplex terminated on IEC 60793-2 category B1.1 singlemode fibre |
| BS EN 50377-8-10:2010 | Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications Type LSH-APC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre with titanium composite ferrule for category C |
| 06/30155057 DC : DRAFT AUG 2006 | EN 50377-8-7 - CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 8-7: LSH-PC SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE, WITH FULL ZIRCONIA FERRULE CATEGORY C |
| BS EN 50377-6-1:2002 | Connectors sets and interconnect components to be used in optical fibre communication systems. Product specifications Type SC-RJ terminated on IEC 60793-2 category A1a and A1b multimode fibre |
| BS EN 50377-8-11:2010 | Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications Type LSH-PC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre with titanium composite ferrule for category C |
| 06/30155061 DC : DRAFT AUG 2006 | EN 50377-8-8 - CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 8-8: LSH-HR SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE, WITH FULL ZIRCONIA FERRULE CATEGORY U |
| I.S. EN 50377-8-9:2007 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 8-9: LSH-PC SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE, WITH FULL ZIRCONIA FERRULE CATEGORY U |
| 17/30353664 DC : 0 | BS EN 50377-18-1 - CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 18-1: TYPE 4+4X10.3125 GB/S MPO (QFSP) TRANSCEIVER MATED WITH AN MPO CONNECTOR EQUIPPED WITH 12 FIBRE PPS FERRULES TERMINATED ON EN 60793-2-10 CATEGORY A1A.3A OR A1A.3B 50/125 MICRON MULTIMODE FIBRE |
| CEI EN 61753-052-6 : 1ED 2017 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 052-6: SINGLE-MODE FIBRE NONCONNECTORIZED FIXED ATTENUATOR - CATEGORY O IN OUTSIDE PLANT ENVIRONMENT |
| BS EN 61753-031-6:2014 | Fibre optic interconnecting devices and passive components. Performance standard Non-connectorized single-mode 1xN and 2xN non-wavelength-selective branching devices for Category O. Uncontrolled environment |
| I.S. EN 61753-121-3:2010 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 121-3: SIMPLEX AND DUPLEX CORDS WITH SINGLE-MODE FIBRE AND CYLINDRICAL FERRULE CONNECTORS FOR CATEGORY U - UNCONTROLLED ENVIRONMENT |
| CEI EN 50377-8-11 : 2012 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 8-11: TYPE LSH-PC SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE WITH TITANIUM COMPOSITE FERRULE FOR CATEGORY C |
| BS EN 61753-052-3:2016 | Fibre optic interconnecting devices and passive components. Performance standard Single-mode fibre non-connectorized fixed attenuator. Category U in uncontrolled environment |
| BS EN 50377-13-2:2011 | Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications Type LX.5-PC DUPLEX terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, with full zirconia ferrule category U |
| BS EN 61753-021-3:2013 | Fibre optic interconnecting devices and passive components. Performance standard Single-mode fibre optic connectors for category U. Uncontrolled environment |
| BS EN 50377-10-2:2005 | Connectors sets and interconnect components to be used in optical fibre communication systems. Product specifications MU/APC singlemode terminated on IEC 60793-2 category B1 fibre |
| CEI EN 61753-052-3 : 2004 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 052-3: SINGLE-MODE FIBRE NONCONNECTORIZED FIXED ATTENUATOR - CATEGORY U IN UNCONTROLLED ENVIRONMENT |
| CEI EN 61753-087-6 : 2013 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 087-6: NON-CONNECTORISED SINGLE-MODE BIDIRECTIONAL 1310 NM UPSTREAM AND 1490 NM DOWNSTREAM WWDM DEVICES FOR CATEGORY O - UNCONTROLLED ENVIRONMENT |
| 01/637057 DC : DRAFT AUG 2001 | DRAFT EN 50173 INFORMATION TECHNOLOGY - GENERIC CABLING SYSTEMS |
| 08/30193101 DC : 0 | BS EN 50377-4-2 - CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 4-2: TYPE SC/APC SIMPLEX 8 DEGREE TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE, WITH FULL ZIRCONIA FERRULE CATEGORY U |
| BS EN 61753-2-1:2001 | Fibre optic interconnecting devices and passive components performance standard. Fibre optic connectors terminated on single-mode fibre for category U Uncontrolled environment |
| CEI EN 50173-1 : 2011 | INFORMATION TECHNOLOGY - GENERIC CABLING SYSTEMS - PART 1: GENERAL REQUIREMENTS |
| CEI EN 50377-13-2 : 2012 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 13-2: TYPE LX.5-PC DUPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE, WITH FULL ZIRCONIA FERRULE CATEGORY U |
| CEI EN 50377-8-12 : 2012 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 8-12: TYPE LSH-APC SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE WITH TITANIUM COMPOSITE FERRULE FOR CATEGORY U |
| NF EN 50377-4-4 : 2011 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 4-4: TYPE SC-PC SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE, WITH FULL ZIRCONIA FERRULE CATEGORY U |
| I.S. EN 50377-8-10:2010 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 8-10: TYPE LSH-APC SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE WITH TITANIUM COMPOSITE FERRULE FOR CATEGORY C |
| I.S. EN 61753-092-6:2008 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 092-6: NON-CONNECTORIZED SINGLE-MODE CIRCULATORS FOR CATEGORY O - UNCONTROLLED ENVIRONMENT AND SEQUENTIAL TEST |
| BS EN 50173-1:2011 | Information technology. Generic cabling systems General requirements |
| I.S. EN 61753-081-2:2014 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 081-2: NON-CONNECTORIZED SINGLE-MODE FIBRE OPTIC MIDDLE-SCALE 1 X N DWDM DEVICES FOR CATEGORY C - CONTROLLED ENVIRONMENTS |
| I.S. EN 61753-058-2:2013 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 058-2: SINGLE MODE FIBRE PIGTAILED STYLE OPTICAL POWER LIMITER FOR CATEGORY C - CONTROLLED ENVIRONMENT (IEC 61753-058-2:2013 (EQV)) |
| CEI EN 61753-141-2 : 2012 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 141-2: FIBRE OPTIC PASSIVE CHROMATIC DISPERSION COMPENSATOR USING SINGLE-MODE DISPERSION COMPENSATING FIBRE FOR CATEGORY C - CONTROLLED ENVIRONMENTS |
| I.S. EN 61753-086-6:2011 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 086-6: NON-CONNECTORIZED SINGLE-MODE BIDIRECTIONAL 1490/1550 NM DOWNSTREAM AND 1310 NM UPSTREAM WWDM DEVICES FOR CATEGORY O - UNCONTROLLED ENVIRONMENT |
| I.S. EN 61753-381-6:2016 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 381-6: CYCLIC ARRAYED WAVEGUIDE GRATING - CATEGORY O (UNCONTROLLED ENVIRONMENT) |
| I.S. EN 61753-088-2:2013 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 088-2: NON-CONNECTORIZED SINGLE-MODE FIBRE OPTIC LAN WDM DEVICES WITH CHANNEL SPACING OF 800 GHZ FOR CATEGORY C - CONTROLLED ENVIRONMENTS (IEC 61753-088-2:2013 (EQV)) |
| CEI EN 61753-101-2 : 2007 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 101-2: FIBRE MANAGEMENT SYSTEMS FOR CATEGORY C - CONTROLLED ENVIRONMENT |
| EN 50173-1:2011 | Information technology - Generic cabling systems - Part 1: General requirements |
| EN 61753-061-2:2012 | Fibre optic interconnecting devices and passive components - Performance standard - Part 061-2: Non-connectorized single-mode fibre optic pigtailed isolators for category C - Controlled environment |
| EN 61753-071-2:2014 | Fibre optic interconnecting devices and passive components - Performance standard - Part 071-2: Non-connectorized single-mode fibre optic 1 × 2 and 2 × 2 spatial switches for category C - Controlled environments |
| EN 61753-042-2:2014 | Fibre optic interconnecting devices and passive components - Performance standard - Part 042-2: Plug-pigtail-style and plug-receptacle-style OTDR reflecting devices for category C - Controlled environments |
| EN 50377-9-1:2003 | Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 9-1: Type MT-RJ terminated on IEC 60793-2 category A1a and A1b multimode fibre |
| I.S. EN 50377-6-2:2007 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 6-2: SC-RJ SINGLE MODE TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE, CATEGORY U |
| BS EN 50377-7-4:2011 | Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications LC-PC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre with full zirconia ferrule for category C |
| CEI EN 50377-8-7 : 2009 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 8-7: LSH-PC TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE, WITH FULL ZIRCONIA FERRULE CATEGORY C |
| I.S. EN 50377-8-2:2007 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 8-2: TYPE LSH-APC SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE, COMPOSITE FERRULE CATEGORY C |
| I.S. EN 50377-8-11:2010 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 8-11: TYPE LSH-PC SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE WITH TITANIUM COMPOSITE FERRULE FOR CATEGORY C |
| I.S. EN 50377-7-4:2011 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 7-4: LC-PC SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE WITH FULL ZIRCONIA FERRULE FOR CATEGORY C |
| BS EN 50377-8-3:2007 | Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications LSH-PC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, composite ferrule category C |
| I.S. EN 50377-9-2:2004 | CONNECTORS SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS; PART 9-2: TYPE MT-RJ TERMINATED ON IEC 60793-2 CATEGORY B1.1 SINGLEMODE FIBRE |
| BS EN 61753-056-2:2013 | Fibre optic interconnecting devices and passive components. Performance standard Single mode fibre pigtailed style optical fuse for category C. Controlled environment |
| BS EN 61753-021-2:2008 | Fibre optic interconnecting devices and passive components performance standard Grade C/3 single-mode fibre optic connectors for category C. Controlled environment |
| CEI EN 61753-086-2 : 2011 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 086-2: NON-CONNECTORISED SINGLE-MODE BIDIRECTIONAL 1490 / 1550 NM DOWNSTREAM 1310 NM UPSTREAM WWDM DEVICES FOR CATEGORY C - CONTROLLED ENVIRONMENT |
| BS EN 50377-8-5:2007 | Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications LSH-PC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, composite ferrule category U |
| CEI EN 50377-8-10 : 2012 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 8-10: TYPE LSH-APC SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE WITH TITANIUM COMPOSITE FERRULE FOR CATEGORY C |
| BS EN 50377-15-1:2011 | Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications Type MPO with 12-fibre PPS ferrules terminated on IEC 60793-2 category A1a multimode fibre for 50/125 micron multimode fibre |
| BS EN 61753-091-2:2013 | Fibre optic interconnecting devices and passive components. Performance standard Non-connectorized single-mode fibre optic pigtailed circulators for category C. Controlled environment |
| BS EN 61753-062-6:2008 | Fibre optic interconnecting devices and passive components performance standard Non-connectorized single-mode fibre optic pigtailed isolators for category O. Uncontrolled environment and sequential test |
| I.S. EN 61753-101-3:2008 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 101-3: FIBRE MANAGEMENT SYSTEMS FOR CATEGORY U - UNCONTROLLED ENVIRONMENT |
| 06/30155051 DC : DRAFT AUG 2006 | EN 50377-8-6 - CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 8-6: LSH-HR SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE, WITH FULL ZIRCONIA FERRULE CATEGORY C |
| I.S. EN 50377-8-5:2007 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 8-5: LSH-PC SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE, COMPOSITE FERRULE CATEGORY U |
| 06/30154767 DC : DRAFT AUG 2006 | EN 50377-8-4 - CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 8-4: LSH-HR SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 B1.3 SINGLEMODE FIBRE, COMPOSITE FERRULE CATEGORY U |
| BS EN 61753-061-2:2012 | Fibre optic interconnecting devices and passive components. Performance standard Non-connectorized single-mode fibre optic pigtailed isolators for category C. Controlled environment |
| BS EN 61753-042-2:2014 | Fibre optic interconnecting devices and passive components. Performance standard Plug-pigtail-style and plug-receptacle-style OTDR reflecting devices for category C. Controlled environments |
| CEI EN 61753-056-2 : 2014 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 056-2: SINGLE MODE FIBRE PIGTAILED STYLE OPTICAL FUSE FOR CATEGORY C - CONTROLLED ENVIRONMENT |
| CEI EN 50377-8-5 : 2008 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 8-5: LSH-PC SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE, COMPOSITE FERRULE CATEGORY U |
| CEI EN 50377-15-1 : 2012 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 15-1: TYPE MPO WITH 12-FIBRE PPS FERRULES TERMINATED ON IEC 60793-2 CATEGORY A1A MULTIMODE FIBRE FOR 50/125 MICRON MULTIMODE FIBRE |
| PREN 50377-14-1 : DRAFT 2017 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 14-1: SIMPLEX AND DUPLEX CORDS MADE FROM SIMPLEX PLUGS WITH CYLINDRICAL FERRULES, USING EN 60793-2-50 SINGLEMODE B1 OR B6 FIBRE FOR CATEGORY C ACCORDING TO EN 61753-1 |
| BS EN 50377-8-2:2007 | Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications Type LSH-APC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, composite ferrule category C |
| BS EN 61753-058-2:2013 | Fibre optic interconnecting devices and passive components. Performance standard Single mode fibre pigtailed style optical power limiter for category C. Controlled environment |
| BS EN 61753-022-2:2013 | Fibre optic interconnecting devices and passive components. Performance standard Fibre optic connectors terminated on multimode fibre for category C. Controlled environment |
| CEI EN 62005-9-1 : 2016 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - RELIABILITY - PART 9-1: QUALIFICATION OF PASSIVE OPTICAL COMPONENTS |
| CEI EN 61753-061-2 : 2013 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 061-2: NON-CONNECTORIZED SINGLE-MODE FIBRE OPTIC PIGTAILED ISOLATORS FOR CATEGORY C - CONTROLLED ENVIRONMENT |
| BS EN 50377-8-7:2007 | Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications LSH-PC terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, with full zirconia ferrule category C |
| BS EN 50377-6-2:2007 | Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications SC-RJ single mode terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, category U |
| BS EN 61753-087-2:2011 | Fibre optic interconnecting devices and passive components. Performance standard Non-connectorized single-mode bidirectional 1310 nm upstream and 1490 nm downstream WWDM devices for category C. Controlled environment |
| CEI EN 61753-084-2 : 2010 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 084-2: NON CONNECTORISED SINGLE-MODE 980/1550 NM WWDM DEVICES FOR CATEGORY C - CONTROLLED ENVIRONMENT |
| 06/30154764 DC : DRAFT AUG 2006 | EN 50377-8-3 - CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 8-3: LSH-PC SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 B1.3 SINGLEMODE FIBRE, COMPOSITE FERRULE CATEGORY C |
| BS EN 61753-088-2:2013 | Fibre optic interconnecting devices and passive components. Performance standard Non-connectorized single-mode fibre optic LAN WDM devices with channel spacing of 800 GHz for category C. Controlled environments |
| 08/30193326 DC : DRAFT NOV 2008 | BS EN 50377-14-1 - CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 14-1: PATCH CORDS WITH EN 60793-2-50 SINGLE MODE CATEGORY B1.1 AND B1.3 FIBRE FOR CATEGORY C |
| 03/318339 DC : DRAFT NOV 2003 | EN 50377-10-2 - CONNECTORS SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 10-2: MU/APC |
| BS EN 61753-1:2007 | Fibre optic interconnecting devices and passive components performance standard General and guidance for performance standards |
| I.S. EN 61753-381-2:2016 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 381-2: CYCLIC ARRAYED WAVEGUIDE GRATING - CATEGORY C (CONTROLLED ENVIRONMENT) |
| CEI EN 50377-4-2 : 2012 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 4-2: TYPE SC/APC SIMPLEX 8 DEGREES TERMINATED ON IEC 60793-2-50 OF TYPES B1.1 AND B1.3 SINGLEMODE FIBRE, WITH FULL ZIRCONIA FERRULE CATEGORY U |
| CEI EN 61753-058-2 : 2014 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 058-2: SINGLE MODE FIBRE PIGTAILED STYLE OPTICAL POWER LIMITER FOR CATEGORY C - CONTROLLED ENVIRONMENT |
| I.S. EN 61753-021-2:2008 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 021-2: GRADE C/3 SINGLE-MODE FIBRE OPTIC CONNECTORS FOR CATEGORY C - CONTROLLED ENVIRONMENT |
| I.S. EN 50377-13-3:2011 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 13-3: TYPE LX.5-APC DUPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE, WITH FULL ZIRCONIA FERRULE CATEGORY U |
| I.S. EN 50377-13-2:2011 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 13-2: TYPE LX.5-PC DUPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE, WITH FULL ZIRCONIA FERRULE CATEGORY U |
| CEI EN 61753-022-2 : 2013 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 022-2: FIBRE OPTIC CONNECTORS TERMINATED ON MULTIMODE FIBRE FOR CATEGORY C - CONTROLLED ENVIRONMENT |
| I.S. EN 50377-7-2:2004 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 7-2: LC-PC DUPLEX TERMINATED ON IEC 60793-2 CATEGORY B1.1 SINGLEMODE FIBRE |
| I.S. EN 61753-042-2:2014 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 042-2: PLUG-PIGTAIL-STYLE AND PLUG-RECEPTACLE-STYLE OTDR REFLECTING DEVICES FOR CATEGORY C - CONTROLLED ENVIRONMENTS |
| CEI EN 50377-8-2 : 2008 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 8-2: TYPE LSH-APC SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE, COMPOSITE FERRULE CATEGORY C |
| I.S. EN 61753-089-2:2013 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 089-2: NON-CONNECTORIZED SINGLE-MODE BIDIRECTIONAL OTDR MONITORING WWDM DEVICES FOR CATEGORY C - CONTROLLED ENVIRONMENT (IEC 61753-089-2:2013 (EQV)) |
| I.S. EN 61753-021-3:2013 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 021-3: SINGLE-MODE FIBRE OPTIC CONNECTORS FOR CATEGORY U - UNCONTROLLED ENVIRONMENT (IEC 61753-021-3:2012 (EQV)) |
| CEI EN 50377-4-4 : 2012 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 4-4: TYPE SC-PC SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE, WITH FULL ZIRCONIA FERRULE CATEGORY U |
| I.S. EN 61753-121-2:2017 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARDS - PART 121-2: SIMPLEX AND DUPLEX CORDS WITH SINGLE-MODE FIBRE AND CYLINDRICAL FERRULE CONNECTORS FOR CATEGORY C - CONTROLLED ENVIRONMENT |
| I.S. EN 50377-8-12:2010 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 8-12: TYPE LSH-APC SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE WITH TITANIUM COMPOSITE FERRULE FOR CATEGORY U |
| EN 61753-083-2:2008 | Fibre optic interconnecting devices and passive components performance standard - Part 083-2: Non-connectorised single-mode fibre optic C-band/L-band WDM devices for category C - Controlled environment |
| EN 50377-8-12:2010 | Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 8-12: Type LSH-APC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre with titanium composite ferrule for category U |
| EN 61753-086-6:2011 | Fibre optic interconnecting devices and passive components - Performance standard - Part 086-6: Non-connectorized single-mode bidirectional 1 490 / 1 550 nm downstream and 1 310 nm upstream WWDM devices for category O - Uncontrolled environment |
| I.S. EN 50377-8-4:2007 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 8-4: LSH-APC SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE, COMPOSITE FERRULE CATEGORY U |
| 05/30128960 DC : 0 | EN 50377-4-1 - CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 4-1: TYPE SC-PC DUPLEX TERMINATED ON IEC 60793-2 CATEGORY A 1 A AND A L B MULTIMODE FIBRE |
| I.S. EN 50377-8-7:2007 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 8-7: LSH-PC TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE, WITH FULL ZIRCONIA FERRULE CATEGORY C |
| BS EN 50377-8-4:2007 | Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications LSH-APC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, composite ferrule category U |
| I.S. EN 50377-5-1:2003 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 5-1: TYPE EC TERMINATED ON IEC 60793-2 CATEGORY B1.1 SINGLEMODE FIBRE |
| BS EN 50377-7-3:2004 | Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications Type LC-APC duplex terminated on IEC 60793-2 category B1.1 singlemode fibre |
| BS EN 50377-8-13:2010 | Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications Type LSH-PC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre with titanium composite ferrule for category U |
| 06/30156204 DC : DRAFT SEP 2006 | BS EN 50378-3-1 - PASSIVE COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 3-1: TYPE: 100/200 GHZ DWDM MODULE TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLE MODE FIBRE |
| I.S. EN 50377-8-13:2010 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 8-13: TYPE LSH-PC SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE WITH TITANIUM COMPOSITE FERRULE FOR CATEGORY U |
| CEI EN 50377-7-4 : 2012 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 7-4: LC-PC SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE WITH FULL ZIRCONIA FERRULE FOR CATEGORY C |
| 08/30185105 DC : DRAFT JULY 2008 | BS EN 50377-15-1 - CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 15-1: TYPE MPO WITH PPS FERRULES TERMINATED ON IEC 60793-2 CATEGORY A1A MULTIMODE FIBRE FOR 50/125 MICRON MULTIMODE FIBRE |
| BS EN 61753-141-2:2011 | Fibre optic interconnecting devices and passive components. Performance standard Fibre optic passive chromatic dispersion compensator using single-mode dispersion compensating fibre for category C. Controlled environments |
| BS EN 50377-2-2:2009 | Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications FC/APC 8 terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, with full zirconia ferrule, category C |
| BS EN 50377-7-1:2004 | Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications Type LC-PC duplex terminated on IEC 60793-2 category A1a and A1b multimode fibre |
| BS EN 61753-086-6:2011 | Fibre optic interconnecting devices and passive components. Performance standard Non-connectorized single-mode bidirectional 1490 / 1550 nm downstream and 1310 nm upstream WWDM devices for category O. Uncontrolled environment |
| BS EN 61753-087-6:2012 | Fibre optic interconnecting devices and passive components. Performance standard Non-connectorised single-mode bidirectional 1310 nm upstream and 1490 nm downstream WWDM devices for category O. Uncontrolled environment |
| BS EN 61753-084-2:2008 | Fibre optic interconnecting devices and passive components performance standard Non connectorised single-mode 980/1550 nm WWDM devices for category C. Controlled environment |
| 06/30154760 DC : DRAFT AUG 2006 | EN 50377-6-2 - CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 6-2: SC-RJ SINGLE MODE TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 B1.3 SINGLE MODE FIBRE, CATEGORY U |
| CEI EN 50377-10-2 : 2006 | CONNECTORS SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 10-2: MU-APC SINGLEMODE TERMINATED ON IEC 60793-2 CATEGORY B1 FIBRE |
| BS EN 61753-121-2:2017 | Fibre optic interconnecting devices and passive components. Performance standard Simplex and duplex cords with single-mode fibre and cylindrical ferrule connectors for category C. Controlled environment |
| 06/30155038 DC : DRAFT AUG 2006 | EN 50377-8-5 - CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 8-5: LSH-PC SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE, COMPOSITE FERRULE CATEGORY U |
| BS EN 61753-121-3:2010 | Fibre optic interconnecting devices and passive components. Performance standard Simplex and duplex cords with single-mode fibre and cylindrical ferrule connectors for category U. Uncontrolled environment |
| CEI EN 62149-1 : 2012 | FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES - PERFORMANCE STANDARDS - PART 1: GENERAL AND GUIDANCE |
| BS EN 62149-1:2012 | Fibre optic active components and devices. Performance standards General and guidance |
| 06/30154756 DC : DRAFT AUG 2006 | EN 50377-8-2 - CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 8-2: TYPE LSH-HRL TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE, COMPOSITE FERRULE CATEGORY C |
| CEI EN 61753-089-2 : 2014 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 089-2: NON-CONNECTORISED SINGLE-MODE BIDIRECTIONAL OTDR MONITORING WWDM DEVICES FOR CATEGORY C - CONTROLLED ENVIRONMENT |
| I.S. EN 61753-101-2:2006 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 101-2: FIBRE MANAGEMENT SYSTEMS FOR CATEGORY C - CONTROLLED ENVIRONMENT |
| I.S. EN 61753-084-2:2008 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 084-2: NON CONNECTORISED SINGLE-MODE 980/1550 NM WWDM DEVICES FOR CATEGORY C - CONTROLLED ENVIRONMENT |
| I.S. EN 61753-062-6:2008 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 062-6: NON-CONNECTORIZED SINGLE MODE FIBRE OPTIC PIGTAILED ISOLATORS FOR CATEGORY O - UNCONTROLLED ENVIRONMENT AND SEQUENTIAL TEST |
| I.S. EN 50377-8-8:2007 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 8-8: LSH-APC SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE, WITH FULL ZIRCONIA FERRULE CATEGORY U |
| I.S. EN 50377-10-2:2005 | CONNECTORS SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 10-2: MU-APC SINGLEMODE TERMINATED ON IEC 60793-2 CATEGORY B1 FIBRE |
| CEI EN 61753-088-2 : 2014 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 088-2: NON CONNECTORISED SINGLE-MODE FIBRE OPTIC LAN WDM DEVICES WITH CHANNEL SPACING OF 800 GHZ FOR CATEGORY C - CONTROLLED ENVIRONMENT |
| I.S. EN 61753-143-2:2013 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 143-2: OPTICAL PASSIVE VIPA-BASED DISPERSION COMPENSATOR OF SINGLE-MODE FIBRE TRANSMISSION FOR CATEGORY C - CONTROLLED ENVIRONMENT (IEC 61753-143-2:2012 (EQV)) |
| I.S. EN 50377-15-1:2011 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 15-1: TYPE MPO WITH 12-FIBRE PPS FERRULES TERMINATED ON IEC 60793-2 CATEGORY A1A MULTIMODE FIBRE FOR 50/125 MICRON MULTIMODE FIBRE |
| I.S. EN 61753-382-2:2016 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 382-2: NON-CONNECTORIZED SINGLE-MODE BIDIRECTIONAL G-PON-NGA WWDM DEVICES FOR CATEGORY C - CONTROLLED ENVIRONMENT |
| I.S. EN 61753-031-6:2014 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 031-6: NON-CONNECTORIZED SINGLE-MODE 1XN AND 2XN NON-WAVELENGTHSELECTIVE BRANCHING DEVICES FOR CATEGORY O - UNCONTROLLED ENVIRONMENT |
| I.S. EN 61753-083-2:2008 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 083-2: NON-CONNECTORISED SINGLE MODE FIBRE OPTIC C-BAND/L-BAND WDM DEVICES FOR CATEGORY C - CONTROLLED ENVIRONMENT |
| I.S. EN 61753-087-2:2011 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 087-2: NON-CONNECTORIZED SINGLE-MODE BIDIRECTIONAL 1310 NM UPSTREAM AND 1490 NM DOWNSTREAM WWDM DEVICES FOR CATEGORY C - CONTROLLED ENVIRONMENT |
| I.S. EN 61753-061-2:2012 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 061-2: NON-CONNECTORIZED SINGLE-MODE FIBRE OPTIC PIGTAILED ISOLATORS FOR CATEGORY C - CONTROLLED ENVIRONMENT (IEC 61753-061-2:2012 (EQV)) |
| I.S. EN 50377-14-1:2011 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 14-1: CORDS WITH IEC 60793-2-50 SINGLEMODE CATEGORY B1.1 AND B1.3 FIBRE FOR CATEGORY C |
| I.S. EN 50377-4-4:2011 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 4-4: TYPE SC-PC SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE, WITH FULL ZIRCONIA FERRULE CATEGORY U |
| I.S. EN 50377-6-1:2002 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 6-1: TYPE SC-RJ TERMINATED ON IEC 60793-2 CATEGORY A1A AND A1B MULTIMODE FIBRE |
| I.S. EN 50377-3-1:2008 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 3-1: TYPE SG TERMINATED ON IEC 60793-2-10 CATEGORY A1A, A1B OR EQUIVALENT MULTIMODE FIBRE FOR CATEGORY C |
| EN 61753-088-2:2013 | Fibre optic interconnecting devices and passive components -Performance standard - Part 088-2: Non-connectorized single-mode fibre optic LAN WDM devices with channel spacing of 800 GHz for category C - Controlled environments |
| EN 50377-8-3:2007 | Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 8-3: LSH-PC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, composite ferrule category C |
| EN 61753-121-3 : 2010 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 121-3: SIMPLEX AND DUPLEX CORDS WITH SINGLE-MODE FIBRE AND CYLINDRICAL FERRULE CONNECTORS FOR CATEGORY U - UNCONTROLLED ENVIRONMENT |
| EN 50377-14-1:2011 | Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 14-1: Cords with IEC 60793-2-50 singlemode category B1.1 and B1.3 fibre for category C |
| EN 50377-16-1:2011 | Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 16-1: Type LF3 APC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre with titanium composite ferrule for category C |
| EN 50377-6-2:2007 | Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 6-2: SC-RJ single mode terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, category U |
| EN 61753-381-6:2016 | Fibre optic interconnecting devices and passive components - Performance standard - Part 381-6: Cyclic arrayed waveguide grating - Category O (uncontrolled environment) |
| EN 61753-053-2:2014 | Fibre optic interconnecting devices and passive components - Performance standard - Part 053-2: Non-connectorized single-mode fibre, electrically controlled, variable optical attenuator for category C - Controlled environments |
| EN 50377-7-2:2004 | Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 7-2: LC-PC duplex terminated on IEC 60793-2 category B1.1 singlemode fibre |
| EN 61753-089-2:2013 | Fibre optic interconnecting devices and passive components - Performance standard - Part 089-2: Non-connectorized single-mode bidirectional OTDR monitoring WWDM devices for category C - Controlled environment |
| EN 61753-101-2 : 2006 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 101-2: FIBRE MANAGEMENT SYSTEMS FOR CATEGORY C - CONTROLLED ENVIRONMENT |
| EN 62664-1-1:2013 | Fibre optic interconnecting devices and passive components - Fibre optic connector product specifications - Part 1-1: LC-PC duplex multimode connectors terminated on IEC 60793-2-10 category A1a fibre |
| EN 62343-2:2014 | Dynamic modules - Part 2: Reliability qualification |
| EN 61753-1:2007 | Fibre optic interconnecting devices and passive components performance standard - Part 1: General and guidance for performance standards |
| EN 50377-8-11:2010 | Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 8-11: Type LSH-PC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre with titanium composite ferrule for category C |
| EN 50377-7-4:2011 | Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 7-4: LC-PC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre with full zirconia ferrule for category C |
| EN 50377-6-1:2002 | Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 6-1: Type SC-RJ terminated on IEC 60793-2 category A1a and A1b multimode fibre |
| EN 61753-062-6:2008 | Fibre optic interconnecting devices and passive components performance standard - Part 062-6: Non-connectorized single-mode fibre optic pigtailed isolators for category O - Uncontrolled environment and sequential test |
| EN 62005-9-1:2015 | Fibre optic interconnecting devices and passive components - Reliability - Part 9-1: Qualification of passive optical components |
| EN 50377-4-4:2011 | Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 4-4: Type SC-PC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, with full zirconia ferrule category U |
| EN 61753-381-2:2016 | Fibre optic interconnecting devices and passive components - Performance standard - Part 381-2: Cyclic arrayed waveguide grating - Category C (controlled environment) |
| EN 61753-087-2:2011 | Fibre optic interconnecting devices and passive components - Performance standard - Part 087-2: Non-connectorized single-mode bidirectional 1310 nm upstream and 1490 nm downstream WWDM devices for category C - Controlled environment |
| EN 50377-8-2:2007 | Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 8-2: Type LSH-APC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, composite ferrule category C |
| EN 50377-3-1:2008 | Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 3-1: Type SG terminated on IEC 60793-2-10 category A1a, A1b or equivalent multimode fibre for category C |
| EN 50377-8-6:2007 | Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 8-6: LSH-HR simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, with full zirconia ferrule category C |
| EN 50377-8-13:2010 | Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 8-13: Type LSH-PC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre with titanium composite ferrule for category U |
| EN 50377-10-1:2007 | Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 10-1: Type MU-PC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, with full zirconia ferrule category C |
| EN 61753-058-2:2013 | Fibre optic interconnecting devices and passive components - Performance standard - Part 058-2: Single mode fibre pigtailed style optical power limiter for category C - Controlled environment |
| EN 50377-8-5:2007 | Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 8-5: LSH-PC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, composite ferrule category U |
| EN 61753-2-1:2000 | Fibre optic interconnecting devices and passive components performance standard - Part 2-1: Fibre optic connectors terminated on single-mode fibre for category U - Uncontrolled environment |
| EN 61753-081-2:2014 | Fibre optic interconnecting devices and passive components - Performance standard - Part 081-2: Non-connectorized single-mode fibre optic middle-scale 1 x N DWDM devices for category C - Controlled environments |
| EN 61753-041-2:2014 | Fibre optic interconnecting devices and passive components - Performance standard - Part 041-2: Non-connectorized single-mode OTDR reflecting device for category C - Controlled environment |
| EN 50377-8-8:2007 | Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 8-8: LSH-APC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, with full zirconia ferrule category U |
| OVE/ONORM EN 61753-021-2 : 2008 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 021-2: GRADE C/3 SINGLE-MODE FIBRE OPTIC CONNECTORS FOR CATEGORY C - CONTROLLED ENVIRONMENT |
| EN 61300-3-4:2013 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-4: Examinations and measurements - Attenuation |
| IEC 61300-3-3:2009 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-3: Examinations and measurements - Active monitoring of changes in attenuation and return loss |
| EN 61300-3-3:2009 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-3: Examinations and measurements - Active monitoring of changes in attenuation and return loss |
| EN 61300-1:2016 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 1: General and guidance |
| EN 61300-3-1:2005 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-1: Examinations and measurements - Visual examination |
| IEC 61300-1:2016 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 1: General and guidance |
| IEC 61300-3-4:2012 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-4: Examinations and measurements - Attenuation |
| IEC 61300-3-1:2005 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-1: Examinations and measurements - Visual examination |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.