EN 61337-2:2004
Current
The latest, up-to-date edition.
Filters using waveguide type dielectric resonators - Part 2: Guidance for use
05-10-2004
FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Application guide for filters using waveguide type
dielectric resonators
3.1 Classification of filters using waveguide type
dielectric resonators
3.2 Practical remarks for filters using waveguide type
dielectric filters
3.2.1 TE[01 delta] mode dielectric filter
3.2.2 TM mode dielectric filter
3.2.3 TEM Mode coaxial dielectric filter
3.2.4 Chip-type multilayered dielectric filter
3.2.5 Stripline and microstripline dielectric filters
4 Checklist of dielectric resonator specification
4.1 Checklist
Annex ZA (normative) Normative references to international
publications with their corresponding
European publications
Bibliography
Draws attention to some of the more fundamental questions which should be considered by the user before he places an order for dielectric filters for a new application. Is limited to filters using waveguide type dielectric resonators that are used for microwave applications such as portable phones, cellular base stations and radio links.
Committee |
CLC/SR 49
|
DocumentType |
Standard
|
PublisherName |
European Committee for Standards - Electrical
|
Status |
Current
|
Standards | Relationship |
I.S. EN 61337-2:2004 | Identical |
NF EN 61337-2 : 2005 | Identical |
BS EN 61337-2:2004 | Identical |
NEN EN IEC 61337-2 : 2004 | Identical |
UNE-EN 61337-2:2004 | Identical |
CEI EN 61337-2 : 2005 | Identical |
PN EN 61337-2 : 2010 | Identical |
IEC 61337-2:2004 | Identical |
NBN EN 61337-2 : 2005 | Identical |
DIN EN 61337-2:2005-03 | Identical |
PNE-prEN 61337-2 | Identical |
HD 323.2.20 : 200S3 | BASIC ENVIRONMENTAL TESTING PROCEDURES - TESTS - TEST T - SOLDERING |
IEC 60068-1:2013 | Environmental testing - Part 1: General and guidance |
IEC 60068-2-58:2015+AMD1:2017 CSV | Environmental testing - Part 2-58: Tests - Test Td: Test methods for solderability, resistance to dissolution of metallization and to soldering heat of surface mounting devices (SMD) |
IEC 60068-2-27:2008 | Environmental testing - Part 2-27: Tests - Test Ea and guidance: Shock |
IEC 60068-2-20:2008 | Environmental testing - Part 2-20: Tests - Test T: Test methods for solderability and resistance to soldering heat of devices with leads |
EN 60068-2-1:2007 | Environmental testing - Part 2-1: Tests - Test A: Cold |
EN 60068-2-2:2007 | Environmental testing - Part 2-2: Tests - Test B: Dry heat |
IEC 60068-2-21:2006 | Environmental testing - Part 2-21: Tests - Test U: Robustness of terminations and integral mounting devices |
IEC 60068-2-13:1983 | Basic environmental testing procedures - Part 2-13: Tests - Test M: Low air pressure |
EN 60068-1:2014 | Environmental testing - Part 1: General and guidance |
EN 60068-2-7:1993 | Environmental testing - Part 2: Tests - Test Ga: Acceleration, steady state |
EN 60068-2-27:2009 | Environmental testing - Part 2-27: Tests - Test Ea and guidance: Shock |
EN 60068-2-21:2006 | Environmental testing - Part 2-21: Tests - Test U: Robustness of terminations and integral mounting devices |
IEC 60068-2-2:2007 | Environmental testing - Part 2-2: Tests - Test B: Dry heat |
EN 60068-2-78:2013 | Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state |
EN 60068-2-13:1999 | Environmental testing - Part 2: Tests - Test M: Low air pressure |
EN 60068-2-6:2008 | Environmental testing - Part 2-6: Tests - Test Fc: Vibration (sinusoidal) |
IEC 61337-1-1:1995 | Filters using waveguide type dielectric resonators - Part 1: General information, standard values and test conditions - Section 1: General information and standard values |
IEC 61337-1-2:1999 | Filters using waveguide type dielectric resonators - Part 1-2: Test conditions |
IEC 60068-2-1:2007 | Environmental testing - Part 2-1: Tests - Test A: Cold |
EN 60068-2-30:2005 | Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle) |
IEC 60068-2-14:2009 | Environmental testing - Part 2-14: Tests - Test N: Change of temperature |
EN 60068-2-14:2009 | Environmental testing - Part 2-14: Tests - Test N: Change of temperature |
IEC 60068-2-30:2005 | Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.