EN 61340-2-3:2016
Current
Current
The latest, up-to-date edition.
Electrostatics - Part 2-3: Methods of test for determining the resistance and resistivity of solid materials used to avoid electrostatic charge accumulation
Amended by
Published date
14-10-2016
Sorry this product is not available in your region.
FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Terms and definitions
4 Conditioning and test environment
5 Selection of test method
6 Resistance measurements for solid conductive
materials
7 Resistance measurements for solid insulating
materials
8 Resistance measurements for planar electrostatic
dissipative materials (used to avoid electrostatic
charge accumulation)
9 Conversion to resistivity values
10 Resistance measurements for non-planar
materials and products with small structures
11 Repeatability and reproducibility
12 Test report
Annex A (normative) - System verification
Annex ZA (normative) - Normative references to
international publications with their
corresponding European publications
Describes test methods for the determination of the electrical resistance and resistivity of solid materials in the range from 10K Ohm to 1T Ohm used to avoid electrostatic charge accumulation. It takes account of existing IEC/ISO standards and other published information, and gives recommendations and guidelines on the appropriate method.
| Committee |
CLC/SR 101
|
| DocumentType |
Standard
|
| PublisherName |
European Committee for Standards - Electrical
|
| Status |
Current
|
| Standards | Relationship |
| DS EN 61340-2-3 : 2016 | Identical |
| NF EN 61340-2-3 : 2017 | Identical |
| IEC 61340-2-3:2016 | Identical |
| NBN EN 61340 2-3 : 2001 | Identical |
| NEN EN IEC 61340-2-3 : 2016 | Identical |
| I.S. EN 61340-2-3:2016 | Identical |
| PN EN 61340-2-3 : 2016 | Identical |
| SN EN 61340-2-3 : 2016 | Identical |
| VDE 0300-2-3 : 2017 | Identical |
| DIN EN 61340-2-3 : 2017 | Identical |
| UNE-EN 61340-2-3:2016 | Identical |
| UNE-EN 61340-2-3:2001 | Identical |
| BS EN 61340-2-3:2016 | Identical |
| CEI EN 61340-2-3 : 2000 | Identical |
| ONORM OVE EN 61340-2-3 : 2017 | Identical |
| OVE/ONORM EN 61340-2-3 : 2001 | Identical |
| PNE-FprEN 61340-2-3 | Identical |
| CEI EN 61340-2-3:2017-07 | Identical |
| BS EN 61226:2010 | Identical |
| I.S. EN 62788-1-2:2016 | MEASUREMENT PROCEDURES FOR MATERIALS USED IN PHOTOVOLTAIC MODULES - PART 1-2: ENCAPSULANTS - MEASUREMENT OF VOLUME RESISTIVITY OF PHOTOVOLTAIC ENCAPSULANTS AND OTHER POLYMERIC MATERIALS |
| CEI EN 61340-4-3 : 2002 | ELECTROSTATICS - PART 4-3: STANDARD TEST METHODS FOR SPECIFIC APPLICATIONS - FOOTWEAR |
| BS EN 61340-4-9:2016 | Electrostatics Standard test methods for specific applications. Garments |
| BS EN 61340-5-3:2015 | Electrostatics Protection of electronic devices from electrostatic phenomena. Properties and requirements classification for packaging intended for electrostatic discharge sensitive devices |
| S.R. CLC/TR 61340-5-2:2008 | ELECTROSTATICS - PART 5-2: PROTECTION OF ELECTRONIC DEVICES FROM ELECTROSTATIC PHENOMENA - USER GUIDE |
| I.S. EN 61340-5-3:2015 | ELECTROSTATICS - PART 5-3: PROTECTION OF ELECTRONIC DEVICES FROM ELECTROSTATIC PHENOMENA - PROPERTIES AND REQUIREMENTS CLASSIFICATION FOR PACKAGING INTENDED FOR ELECTROSTATIC DISCHARGE SENSITIVE DEVICES |
| BS EN 61340-4-4 : 2012 | ELECTROSTATICS - PART 4-4: STANDARD TEST METHODS FOR SPECIFIC APPLICATIONS - ELECTROSTATIC CLASSIFICATION OF FLEXIBLE INTERMEDIATE BULK CONTAINERS (FIBC) |
| CEI EN 60079-32-2 : 2016 | EXPLOSIVE ATMOSPHERES - PART 32-2: ELECTROSTATICS HAZARDS - TESTS |
| PD CLC/TR 60079-32-1:2015 | Explosive atmospheres Electrostatic hazards, guidance |
| EN 61340-5-1:2016/AC:2017-05 | ELECTROSTATICS - PART 5-1: PROTECTION OF ELECTRONIC DEVICES FROM ELECTROSTATIC PHENOMENA - GENERAL REQUIREMENTS (IEC 61340-5-1:2016/COR1:2017) |
| EN 60079-32-2:2015 | Explosive atmospheres - Part 32-2: Electrostatics hazards - Tests |
| EN 62788-1-2:2016 | Measurement procedures for materials used in photovoltaic modules - Part 1-2: Encapsulants - Measurement of volume resistivity of photovoltaic encapsulants and other polymeric materials |
| BS EN 60079-32-2:2015 | Explosive atmospheres Electrostatics hazards. Tests |
| UNI EN 16350 : 2014 | PROTECTIVE GLOVES - ELECTROSTATIC PROPERTIES |
| BS EN 61340-4-3:2002 | Electrostatics. Standard test methods for specific applications Footwear |
| S.R. CLC/TR 60079-32-1:2015 | EXPLOSIVE ATMOSPHERES - PART 32-1: ELECTROSTATIC HAZARDS - GUIDANCE |
| I.S. EN IEC 61340-4-4:2018 | ELECTROSTATICS - PART 4-4: STANDARD TEST METHODS FOR SPECIFIC APPLICATIONS - ELECTROSTATIC CLASSIFICATION OF FLEXIBLE INTERMEDIATE BULK CONTAINERS (FIBC) |
| I.S. EN 61340-5-1:2016 | ELECTROSTATICS - PART 5-1: PROTECTION OF ELECTRONIC DEVICES FROM ELECTROSTATIC PHENOMENA - GENERAL REQUIREMENTS |
| VDI 2083 Blatt 5.1:2007-09 | Cleanroom technology - Cleanroom operation |
| CEI CLC/TR 61340-5-2 : 2010 | ELECTROSTATICS - PART 5-2: PROTECTION OF ELECTRONIC DEVICES FROM ELECTROSTATIC PHENOMENA - USER GUIDE |
| BS EN 16350:2014 | Protective gloves. Electrostatic properties |
| BS EN 62788-1-2:2016 | Measurement procedures for materials used in photovoltaic modules Encapsulants. Measurement of volume resistivity of photovoltaic encapsulants and other polymeric materials |
| CEI EN 62788-1-2 : 1ED 2017 | MEASUREMENT PROCEDURES FOR MATERIALS USED IN PHOTOVOLTAIC MODULES - PART 1-2: ENCAPSULANTS - MEASUREMENT OF VOLUME RESISTIVITY OF PHOTOVOLTAIC ENCAPSULANTS AND OTHER POLYMERIC MATERIALS |
| I.S. EN 60079-32-2:2015 | EXPLOSIVE ATMOSPHERES - PART 32-2: ELECTROSTATICS HAZARDS - TESTS |
| EN IEC 61340-4-4:2018 | Electrostatics - Part 4-4: Standard test methods for specific applications - Electrostatic classification of flexible intermediate bulk containers (FIBC) |
| I.S. EN 61340-4-4:2012 | ELECTROSTATICS - PART 4-4: STANDARD TEST METHODS FOR SPECIFIC APPLICATIONS - ELECTROSTATIC CLASSIFICATION OF FLEXIBLE INTERMEDIATE BULK CONTAINERS (FIBC) (IEC 61340-4-4:2012 (EQV)) |
| CLC/TR 61340-5-2:2008 | Electrostatics - Part 5-2: Protection of electronic devices from electrostatic phenomena - User guide |
| I.S. EN 16350:2014 | PROTECTIVE GLOVES - ELECTROSTATIC PROPERTIES |
| DIN EN 16350:2014-07 | PROTECTIVE GLOVES - ELECTROSTATIC PROPERTIES |
| I.S. EN 61340-4-9:2016 | ELECTROSTATICS - PART 4-9: STANDARD TEST METHODS FOR SPECIFIC APPLICATIONS - GARMENTS |
| CEI EN 61340-4-9 : 1ED 2017 | ELECTROSTATICS - PART 4-9: STANDARD TEST METHODS FOR SPECIFIC APPLICATIONS - GARMENTS |
| EN 61340-4-3:2001 | Electrostatics - Part 4-3: Standard test methods for specific applications - Footwear |
| PD CLC/TR 61340-5-2:2008 | Electrostatics Protection of electronic devices from electrostatic phenomena. User guide |
| UNE-EN 16350:2014 | Protective gloves - Electrostatic properties |
| BS EN 61340-5-1:2016 | Electrostatics Protection of electronic devices from electrostatic phenomena. General requirements |
| I.S. EN 61340-4-3:2002 | ELECTROSTATICS - PART 4-3: STANDARD TEST METHODS FOR SPECIFIC APPLICATIONS - FOOTWEAR |
| UNE-EN 62788-1-2:2017 | Measurement procedures for materials used in photovoltaic modules - Part 1-2: Encapsulants - Measurement of volume resistivity of photovoltaic encapsulants and other polymeric materials |
| EN 16350:2014 | Protective gloves - Electrostatic properties |
| CLC/TR 60079-32-1:2015 | Explosive atmospheres - Part 32-1: Electrostatic Hazards - Guidance |
| EN 61340-4-4:2012/A1:2015 | ELECTROSTATICS - PART 4-4: STANDARD TEST METHODS FOR SPECIFIC APPLICATIONS - ELECTROSTATIC CLASSIFICATION OF FLEXIBLE INTERMEDIATE BULK CONTAINERS (FIBC) (IEC 61340-4-4:2012) |
| UNE-EN 60079-32-2:2016 | Explosive atmospheres - Part 32-2: Electrostatics hazards - Tests |
| EN 61340-5-3:2015 | Electrostatics - Part 5-3: Protection of electronic devices from electrostatic phenomena - Properties and requirements classification for packaging intended for electrostatic discharge sensitive devices |
| EN 61340-4-9:2016 | Electrostatics - Part 4-9: Standard test methods for specific applications - Garments |
| ISO 7619-1:2010 | Rubber, vulcanized or thermoplastic Determination of indentation hardness Part 1: Durometer method (Shore hardness) |
| ISO 3915:1981 | Plastics — Measurement of resistivity of conductive plastics |
| IEC 62631-3-3:2015 | Dielectric and resistive properties of solid insulating materials - Part 3-3: Determination of resistive properties (DC methods) - Insulation resistance |
| IEC 62631-3-2:2015 | Dielectric and resistive properties of solid insulating materials - Part 3-2: Determination of resistive properties (DC methods) - Surface resistance and surface resistivity |
| IEC 62631-3-1:2016 | Dielectric and resistive properties of solid insulating materials - Part 3-1: Determination of resistive properties (DC methods) - Volume resistance and volume resistivity - General method |
| EN 62631-3-2:2016 | Dielectric and resistive properties of solid insulating materials - Part 3-2: Determination of resistive properties (DC Methods) - Surface resistance and surface resistivity |
| EN 62631-3-1:2016 | Dielectric and resistive properties of solid insulating materials - Part 3-1: Determination of resistive properties (DC methods) - Volume resistance and volume resistivity - General method |
| EN 62631-3-3:2016 | Dielectric and resistive properties of solid insulating materials - Part 3-3: Determination of resistive properties (DC Methods) - Insulation resistance |
| ISO 1853:2011 | Conducting and dissipative rubbers, vulcanized or thermoplastic Measurement of resistivity |
| EN ISO 3915:1999 | Plastics - Measurement of resistivity of conductive plastics (ISO 3915:1981) |
| ISO 2951:2012 | Rubber, vulcanized or thermoplastic Determination of insulation resistance |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.