EN 61730-2:2007/A1:2012
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 2: REQUIREMENTS FOR TESTING (IEC 61730-2:2004/A1:2011)
Amendment of
Superseded date
01-04-2018
Superseded by
Published date
12-01-2013
Sorry this product is not available in your region.
Foreword
1 Scope and object
2 Normative references
3 Application classes
4 Test categories
5 Application classes and their necessary
test procedures
6 Sampling
7 Test report
8 Testing
9 Pass criteria
10 Test procedures
11 Component tests
Bibliography
Annex ZA (normative) - Normative references to
international publications with their
corresponding European publications
Specifies the testing requirements for photovoltaic (PV) modules in order to provide safe electrical and mechanical operation during their expected lifetime.
| Committee |
TC 82
|
| DevelopmentNote |
Redesignated as EN IEC 61730-2. (05/2018)
|
| DocumentType |
Standard
|
| PublisherName |
European Committee for Standards - Electrical
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| BS EN 61730-2 : 2007 | Identical |
| VDE 0126-30-2 : 2012 | Identical |
| NBN EN 61730-2 : 2007 AMD 1 2012 | Identical |
| NF EN 61730-2 : 2007 AMD 1 2012 | Identical |
| CEI EN 61730-2 / A1:2012 | Identical |
| I.S. EN 61730-2:2007 | Identical |
| NEN EN IEC 61730-2 : 2007 AMD 1 2012 | Identical |
| OVE/ONORM EN 61730-2 : 2012 | Identical |
| PN EN 61730-2 : 2007 AMD 1 2012 | Identical |
| DIN EN 61730-2 : 2012 | Identical |
| UNE-EN 61730-2:2007 | Identical |
| BS EN 61730-2:2007+A1:2012 | Identical |
| CEI EN 61701 : 2012 | SALT MIST CORROSION TESTING OF PHOTOVOLTAIC (PV) MODULES |
| CEI EN 61215-1 : 1ED 2017 | TERRESTRIAL PHOTOVOLTAIC (PV) MODULES - DESIGN QUALIFICATION AND TYPE APPROVAL - PART 1: TEST REQUIREMENTS |
| BS EN 61701:2012 | Salt mist corrosion testing of photovoltaic (PV) modules |
| BS EN 61730-1 : 2007 | PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 1: REQUIREMENTS FOR CONSTRUCTION |
| BS EN 50548 : 2011 | JUNCTION BOXES FOR PHOTOVOLTAIC MODULES |
| I.S. EN 50548:2011 | JUNCTION BOXES FOR PHOTOVOLTAIC MODULES |
| DD CLC/TS 61836:2009 | Solar photovoltaic energy systems. Terms, definitions and symbols |
| UNE-EN 61701:2012 | Salt mist corrosion testing of photovoltaic (PV) modules |
| 08/30177777 DC : DRAFT FEB 2008 | BS EN 62548 - INSTALLATION AND SAFETY REQUIREMENTS FOR PHOTOVOLTAIC (PV) GENERATORS |
| EN 62253 : 2011 | PHOTOVOLTAIC PUMPING SYSTEMS - DESIGN QUALIFICATION AND PERFORMANCE MEASUREMENTS |
| BS EN 50583-1:2016 | Photovoltaics in buildings BIPV modules |
| BS EN 62716:2013 | Photovoltaic (PV) modules. Ammonia corrosion testing |
| CEI EN 62716 : 2014 | PHOTOVOLTAIC (PV) MODULES - AMMONIA CORROSION TESTING |
| I.S. EN 62759-1:2015 | PHOTOVOLTAIC (PV) MODULES - TRANSPORTATION TESTING - PART 1: TRANSPORTATION AND SHIPPING OF MODULE PACKAGE UNITS |
| S.R. HD 60364-7-712:2016 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 7-712: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - PHOTOVOLTAIC (PV) SYSTEMS |
| I.S. EN 61215-1:2016 | TERRESTRIAL PHOTOVOLTAIC (PV) MODULES - DESIGN QUALIFICATION AND TYPE APPROVAL - PART 1: TEST REQUIREMENTS |
| UNE-EN 62759-1:2016 | Photovoltaic (PV) modules - Transportation testing - Part 1: Transportation and shipping of module package units |
| BS EN 62253:2011 | Photovoltaic pumping systems. Design qualification and performance measurements |
| BS EN 62790:2015 | Junction boxes for photovoltaic modules. Safety requirements and tests |
| 09/30214460 DC : 0 | BS EN 50548 - JUNCTION BOXES FOR PHOTOVOLTAIC MODULES |
| 12/30266506 DC : 0 | BS EN 50583 - PHOTOVOLTAICS IN BUILDINGS |
| EN IEC 61730-1:2018/AC:2018-06 | PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 1: REQUIREMENTS FOR CONSTRUCTION (IEC 61730-1:2016) |
| UNE-EN 62790:2015 | Junction boxes for photovoltaic modules - Safety requirements and tests |
| I.S. EN 62716:2013 | PHOTOVOLTAIC (PV) MODULES - AMMONIA CORROSION TESTING (IEC 62716:2013 (EQV)) |
| UNE-EN 62716:2014 | Photovoltaic (PV) modules - Ammonia corrosion testing |
| I.S. EN 61701:2012 | SALT MIST CORROSION TESTING OF PHOTOVOLTAIC (PV) MODULES (IEC 61701:2011 (EQV)) |
| UNE-HD 60364-7-712:2017 | Low-voltage electrical installations - Part 7-712: Requirements for special installations or locations - Photovoltaic (PV) systems |
| UNE-EN 50521:2010 | Connectors for photovoltaic systems - Safety requirements and tests |
| EN 61701:2012 | Salt mist corrosion testing of photovoltaic (PV) modules |
| EN 62790:2015 | Junction boxes for photovoltaic modules - Safety requirements and tests |
| PREN 50583 : DRAFT 2012 | PHOTOVOLTAICS IN BUILDINGS |
| CLC/TS 61836:2009 | Solar photovoltaic energy systems - Terms, definitions and symbols |
| I.S. EN IEC 61730-1:2018 | PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 1: REQUIREMENTS FOR CONSTRUCTION |
| UNE-EN 62253:2012 | Photovoltaic pumping systems - Design qualification and performance measurements |
| UNE-EN 50380:2003 | Datasheet and nameplate information for photovoltaic modules |
| BS EN 50521 : 2009 | CONNECTORS FOR PHOTOVOLTAIC SYSTEMS - SAFETY REQUIREMENTS AND TESTS |
| 08/30179116 DC : DRAFT MAR 2008 | BS EN 50521 - CONNECTORS FOR PHOTOVOLTAIC SYSTEMS - SAFETY REQUIREMENTS AND TESTS |
| UNE-EN 50583-1:2016 | Photovoltaics in buildings - Part 1: BIPV modules |
| I.S. EN 62790:2015 | JUNCTION BOXES FOR PHOTOVOLTAIC MODULES - SAFETY REQUIREMENTS AND TESTS |
| BS EN 62759-1:2015 | Photovoltaic (PV) modules. Transportation testing Transportation and shipping of module package units |
| BS EN 61215-1:2016 | Terrestrial photovoltaic (PV) modules. Design qualification and type approval Test requirements |
| I.S. EN 50521:2008 | CONNECTORS FOR PHOTOVOLTAIC SYSTEMS - SAFETY REQUIREMENTS AND TESTS |
| I.S. EN 62253:2011 | PHOTOVOLTAIC PUMPING SYSTEMS - DESIGN QUALIFICATION AND PERFORMANCE MEASUREMENTS |
| I.S. EN 61730-1:2007 | PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 1: REQUIREMENTS FOR CONSTRUCTION |
| UNE-EN 50548:2012 | Junction boxes for photovoltaic modules |
| I.S. EN IEC 62688:2018 | CONCENTRATOR PHOTOVOLTAIC (CPV) MODULES AND ASSEMBLIES - SAFETY QUALIFICATION |
| I.S. EN 50583-1:2016 | PHOTOVOLTAICS IN BUILDINGS - PART 1: BIPV MODULES |
| EN IEC 62688:2018 | Concentrator photovoltaic (CPV) modules and assemblies - Safety qualification |
| UNE-EN 61215-1:2017 | Terrestrial photovoltaic (PV) modules - Design qualification and type approval - Part 1: Test requirements |
| PREN 50548 : DRAFT 2009 | JUNCTION BOXES FOR PHOTOVOLTAIC MODULES |
| EN 50548 : 2011 AMD 2 2014 | JUNCTION BOXES FOR PHOTOVOLTAIC MODULES |
| EN 50521:2008/A1:2012 | CONNECTORS FOR PHOTOVOLTAIC SYSTEMS - SAFETY REQUIREMENTS AND TESTS |
| EN 50583-1:2016 | Photovoltaics in buildings - Part 1: BIPV modules |
| EN 62759-1:2015 | Photovoltaic (PV) modules - Transportation testing - Part 1: Transportation and shipping of module package units |
| HD 60364-7-712:2016 | Low-voltage electrical installations - Part 7-712: Requirements for special installations or locations - Photovoltaic (PV) systems |
| EN 62716:2013/AC:2014 | PHOTOVOLTAIC (PV) MODULES - AMMONIA CORROSION TESTING (IEC 62716:2013) |
| EN 61730-1:2007/A11:2014 | PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 1: REQUIREMENTS FOR CONSTRUCTION (IEC 61730-1:2004, MODIFIED) |
| EN 61215-1:2016 | Terrestrial photovoltaic (PV) modules - Design qualification and type approval - Part 1: Test requirements |
| FM 4476 : 2011 | FLEXIBLE PHOTOVOLTAIC MODULES |
| IEC 60243-1:2013 | Electric strength of insulating materials - Test methods - Part 1: Tests at power frequencies |
| ISO/IEC 17025:2005 | General requirements for the competence of testing and calibration laboratories |
| EN 60904-2:2015 | Photovoltaic devices - Part 2: Requirements for photovoltaic reference devices |
| ANSI Z97.1 : 2015 | SAFETY GLAZING MATERIALS USED IN BUILDINGS - SAFETY PERFORMANCE SPECIFICATIONS AND METHODS OF TEST |
| IEC 60068-1:2013 | Environmental testing - Part 1: General and guidance |
| IEC 61215:2005 | Crystalline silicon terrestrial photovoltaic (PV) modules - Design qualification and type approval |
| IEC 60068-2-21:2006 | Environmental testing - Part 2-21: Tests - Test U: Robustness of terminations and integral mounting devices |
| EN 60068-1:2014 | Environmental testing - Part 1: General and guidance |
| EN 61646:2008 | THIN-FILM TERRESTRIAL PHOTOVOLTAIC (PV) MODULES - DESIGN QUALIFICATION AND TYPE APPROVAL |
| EN 61730-1:2007/A11:2014 | PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 1: REQUIREMENTS FOR CONSTRUCTION (IEC 61730-1:2004, MODIFIED) |
| HD 588.1 : S1 AMD 1 | HIGH VOLTAGE TEST TECHNIQUES - GENERAL DEFINITIONS AND TEST REQUIREMENTS |
| IEC 60364-1:2005 | Low-voltage electrical installations - Part 1: Fundamental principles, assessment of general characteristics, definitions |
| UL 514C:4ED 2014-04-08 | Nonmetallic Outlet Boxes, Flush-Device Boxes, and Covers |
| IEC 61646:2008 | Thin-film terrestrial photovoltaic (PV) modules - Design qualification and type approval |
| IEC 60904-2:2015 RLV | Photovoltaic devices - Part 2: Requirements for photovoltaic reference devices |
| IEC 60410:1973 | Sampling plans and procedures for inspection by attributes |
| IEC 61345:1998 | UV test for photovoltaic (PV) modules |
| EN 12150-1:2015 | Glass in building - Thermally toughened soda lime silicate safety glass - Part 1: Definition and description |
| IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
| IEC 61730-1:2016 | Photovoltaic (PV) module safety qualification - Part 1: Requirements for construction |
| EN 61032:1998 | Protection of persons and equipment by enclosures - Probes for verification |
| EN 60664-1:2007 | Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests |
| EN 60243-1:2013 | ELECTRIC STRENGTH OF INSULATING MATERIALS - TEST METHODS - PART 1: TESTS AT POWER FREQUENCIES (IEC 60243-1:2013) |
| EN 61140:2016 | Protection against electric shock - Common aspects for installation and equipment |
| IEC 60060-1:2010 | High-voltage test techniques - Part 1: General definitions and test requirements |
| IEC 61140:2016 | Protection against electric shock - Common aspects for installation and equipment |
| IEC 61721:1995 | Susceptibility of a photovoltaic (PV) module to accidental impact damage (resistance to impact test) |
| IEC 61032:1997 | Protection of persons and equipment by enclosures - Probes for verification |
| EN 50380:2017 | Marking and documentation requirements for Photovoltaic Modules |
| IEC 60664-1:2007 | Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests |
| EN 61215:2005 | Crystalline silicon terrestrial photovoltaic (PV) modules - Design qualification and type approval |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.