EN 61869-3:2011
Current
Current
The latest, up-to-date edition.
Instrument transformers - Part 3: Additional requirements for inductive voltage transformers
Published date
21-10-2011
Sorry this product is not available in your region.
FOREWORD
1 Scope
2 Normative references
3 Terms, definitions and abbreviations
5 Ratings
6 Design and construction
7 Tests
Annex ZA (normative) - Normative references
to international publications with their
corresponding European publications
IEC 61869-3:2011 applies to new inductive voltage transformers for use with electrical measuring instruments and electrical protective devices at frequencies from 15 Hz to 100 Hz. This standard replaces IEC 60044-2: Inductive Voltage Transformers. This publication is to be read in conjunction with IEC 61869-1:2007.
| Committee |
CLC/TC 38
|
| DevelopmentNote |
To be read in conjunction with EN 61869-1. Supersedes EN 60044-2. (10/2011)
|
| DocumentType |
Standard
|
| PublisherName |
European Committee for Standards - Electrical
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| NF EN 61869-3 : 2012 | Identical |
| NBN EN 61869-3 : 2012 | Identical |
| VDE 0414-9-3 : 2012 | Identical |
| CEI EN 61869-3 : 2012 | Identical |
| DIN EN 61869-3 : 2012 | Identical |
| IEC 61869-3:2011 | Identical |
| NEN EN IEC 61869-3 : 2011 | Identical |
| PN EN 61869-3 : 2011 | Identical |
| BS EN 61869-3:2011 | Identical |
| I.S. EN 61869-3:2011 | Identical |
| BS EN 62739-3:2017 | Identical |
| UNE-EN 61869-3:2012 | Identical |
| I.S. EN 50463-2:2017 | RAILWAY APPLICATIONS - ENERGY MEASUREMENT ON BOARD TRAINS - PART 2: ENERGY MEASURING |
| CEI EN 61869-6 : 1ED 2017 | INSTRUMENT TRANSFORMERS - PART 6: ADDITIONAL GENERAL REQUIREMENTS FOR LOW-POWER INSTRUMENT TRANSFORMERS |
| BS EN 50152-3-3:2016 | Railway applications. Fixed installations. Particular requirements for a.c. switchgear Measurement, control and protection devices for specific use in a.c. traction systems. Voltage transformers |
| EN 61400-12-1:2017 | Wind energy generation systems - Part 12-1: Power performance measurement of electricity producing wind turbines |
| CEI EN 50152-3-3 : 2001 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - PARTICULAR REQUIREMENTS FOR A.C. SWITCHGEAR - PART 3-3: MEASUREMENT, CONTROL AND PROTECTION DEVICES FOR SPECIFIC USE IN A.C. TRACTION SYSTEMS - VOLTAGE TRANSFORMERS |
| I.S. EN 61869-6:2016 | INSTRUMENT TRANSFORMERS - PART 6: ADDITIONAL GENERAL REQUIREMENTS FOR LOW-POWER INSTRUMENT TRANSFORMERS |
| I.S. EN 50152-3-3:2016 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - PARTICULAR REQUIREMENTS FOR A.C. SWITCHGEAR - PART 3-3: MEASUREMENT, CONTROL AND PROTECTION DEVICES FOR SPECIFIC USE IN A.C. TRACTION SYSTEMS - VOLTAGE TRANSFORMERS |
| EN 61869-4:2014/AC:2014 | INSTRUMENT TRANSFORMERS - PART 4: ADDITIONAL REQUIREMENTS FOR COMBINED TRANSFORMERS (IEC 61869-4:2013) |
| EN 50152-3-3:2016 | Railway applications - Fixed installations - Particular requirements for a.c. switchgear - Part 3-3: Measurement, control and protection devices for specific use in a.c. traction systems - Voltage transformers |
| EN 61869-6:2016 | Instrument transformers - Part 6: Additional general requirements for low-power instrument transformers |
| BS EN 61869-4:2014 | Instrument transformers Additional requirements for combined transformers |
| CEI EN 61869-4 : 2014 | INSTRUMENT TRANSFORMERS - PART 4: ADDITIONAL REQUIREMENTS FOR COMBINED TRANSFORMERS |
| S.R. CLC/TS 50549-2:2015 | REQUIREMENTS FOR GENERATING PLANTS TO BE CONNECTED IN PARALLEL WITH DISTRIBUTION NETWORKS - PART 2: CONNECTION TO A MV DISTRIBUTION NETWORK |
| I.S. EN 62689-1:2016 | CURRENT AND VOLTAGE SENSORS OR DETECTORS, TO BE USED FOR FAULT PASSAGE INDICATION PURPOSES - PART 1: GENERAL PRINCIPLES AND REQUIREMENTS |
| 15/30314795 DC : 0 | BS EN 50152-3-3 - RAILWAY APPLICATIONS - FIXED INSTALLATIONS - PARTICULAR REQUIREMENTS FOR A.C. SWITCHGEAR - PART 3-3: MEASUREMENT, CONTROL AND PROTECTION DEVICES FOR SPECIFIC USE IN A.C. TRACTION SYSTEMS - SINGLE-PHASE INDUCTIVE VOLTAGE TRANSFORMERS |
| PREN 50152-3-3 : DRAFT 2015 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - PARTICULAR REQUIREMENTS FOR A.C. SWITCHGEAR - PART 3-3: MEASUREMENT, CONTROL AND PROTECTION DEVICES FOR SPECIFIC USE IN A.C. TRACTION SYSTEMS - SINGLE-PHASE INDUCTIVE VOLTAGE TRANSFORMERS |
| BS EN 50463-2:2017 | Railway applications. Energy measurement on board trains Energy measuring |
| BS EN IEC 61400-12-2:2013 | Wind turbines Power performance of electricity-producing wind turbines based on nacelle anemometry |
| BS EN 60143-2:2013 | Series capacitors for power systems Protective equipment for series capacitor banks |
| EN 50463-2:2017 | Railway applications - Energy measurement on board trains - Part 2: Energy measuring |
| CEI EN 60143-2 : 2014 | SERIES CAPACITORS FOR POWER SYSTEMS - PART 2: PROTECTIVE EQUIPMENT FOR SERIES CAPACITOR BANKS |
| I.S. EN 61400-12-2:2013 | WIND TURBINES - PART 12-2: POWER PERFORMANCE OF ELECTRICITYPRODUCING WIND TURBINES BASED ON NACELLE ANEMOMETRY |
| I.S. EN 60076-19:2015 | POWER TRANSFORMERS - PART 19: RULES FOR THE DETERMINATION OF UNCERTAINTIES IN THE MEASUREMENT OF THE LOSSES ON POWER TRANSFORMERS AND REACTORS |
| I.S. EN 61400-12-1:2017 | WIND POWER GENERATION SYSTEMS - PART 12-1: POWER PERFORMANCE MEASUREMENT OF ELECTRICITY PRODUCING WIND TURBINES |
| EN 62689-1:2016 | Current and voltage sensors or detectors, to be used for fault passage indication purposes - Part 1: General principles and requirements |
| I.S. EN 60143-2:2013 | SERIES CAPACITORS FOR POWER SYSTEMS - PART 2: PROTECTIVE EQUIPMENT FOR SERIES CAPACITOR BANKS (IEC 60143-2:2012 (EQV)) |
| CEI EN 61400-12-2 : 2013 | WIND TURBINES - PART 12-2: POWER PERFORMANCE OF ELECTRICITY PRODUCING WIND TURBINES BASED ON NACELLE ANEMOMETRY |
| CEI EN 61400-12-1 : 2007 | WIND POWER GENERATION SYSTEMS - PART 12-1: POWER PERFORMANCE MEASUREMENT OF ELECTRICITY PRODUCING WIND TURBINES |
| BS EN 62689-1:2016 | Current and voltage sensors or detectors, to be used for fault passage indication purposes General principles and requirements |
| CLC/TS 50549-2:2015 | Requirements for generating plants to be connected in parallel with distribution networks - Part 2: Connection to a MV distribution network |
| I.S. EN 61869-4:2014 | INSTRUMENT TRANSFORMERS - PART 4: ADDITIONAL REQUIREMENTS FOR COMBINED TRANSFORMERS |
| EN 61400-12-2:2013/AC:2016-10 | WIND TURBINES - PART 12-2: POWER PERFORMANCE OF ELECTRICITYPRODUCING WIND TURBINES BASED ON NACELLE ANEMOMETRY (IEC 61400-12-2:2013/COR1:2016) |
| BS EN 61869-6:2016 | Instrument transformers Additional general requirements for low-power instrument transformers |
| BS EN 60076-19:2015 | Power transformers Rules for the determination of uncertainties in the measurement of the losses on power transformers and reactors |
| EN 60076-19:2015 | Power transformers - Part 19: Rules for the determination of uncertainties in the measurement of the losses on power transformers and reactors |
| EN 60143-2:2013 | Series capacitors for power systems - Part 2: Protective equipment for series capacitor banks |
| UNE-EN 60076-19:2016 | Power transformers - Part 19: Rules for the determination of uncertainties in the measurement of the losses on power transformers and reactors |
| UNE-EN 61869-4:2017 | Instrument transformers - Part 4: Additional requirements for combined transformers |
| IEC 60038:2009 | IEC standard voltages |
| IEC 60028:1925 | International standard of resistance for copper |
| IEC 61869-1:2007 | Instrument transformers - Part 1: General requirements |
| EN 61869-1:2009 | Instrument transformers - Part 1: General requirements |
| EN 60038:2011 | CENELEC standard voltages |
Summarise
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Sorry this product is not available in your region.