EN 62115:2005/A12:2015
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
ELECTRIC TOYS - SAFETY (IEC 62115:2003 + A1:2004, MODIFIED)
Amendment of
Superseded date
10-02-2022
Superseded by
Published date
12-01-2013
Sorry this product is not available in your region.
FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Definitions
4 General requirement
5 General conditions for the tests
6 Criteria for reduced testing
7 Marking and instructions
8 Power input
9 Heating and abnormal operation
10 Electric strength at operating temperature
11 Moisture resistance
12 Electric strength at room temperature
13 Mechanical strength
14 Construction
15 Protection of cords and wires
16 Components
17 Screws and connections
18 Clearances and creepage distances
19 Resistance to heat and fire
20 Radiation, toxicity and similar hazards
Annex A (normative) - Experimental sets
Annex B (normative) - Needle-flame test
Annex C (normative) - Automatic controls and switches
Annex D (informative) - Sequence of the tests of Clause 19
Annex E (normative) - Toys incorporating lasers and
light-emitting diodes
Annex ZA (normative) - Normative references to international
publications with their corresponding European
publications
Annex ZB (normative) - Toys with protective electronic circuit
Annex ZC (normative) - Toys generating Electromagnetic Fields
(EMF)
Annex ZZA (informative) - Coverage of Essential Requirements
of the EU Directives
Annex ZZB (informative) - Background and justification for
this European Standard
Bibliography
Describes electrical safety requirements for toys that have at least one function dependant on electricity, toys being any product designed or clearly intended, whether or not exclusively, for use in play by children of less than 14 years of age.
| Committee |
TC 61
|
| DevelopmentNote |
Supersedes EN 50088. (06/2005)
|
| DocumentType |
Standard
|
| PublisherName |
European Committee for Standards - Electrical
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| UNE-EN 62115:2006 | Identical |
| NBN EN 62115 : 2006 AMD 4 2015 | Identical |
| CEI EN 62115/A12:2016 | Identical |
| PN EN 62115 : 2005 AMD 12 2015 | Identical |
| VDE 0700-210 : 2016 | Identical |
| I.S. EN 62115:2006 | Identical |
| DIN EN 62115 : 2016 | Identical |
| NEN EN IEC 62115 : 2005 AMD 12 2015 | Identical |
| SN EN 62115:2005+A2:2011+A11:2012+A12:2015 | Identical |
| BS EN 62115 : 2005 | Identical |
| NF EN 62115 : 2005 AMD 12 2018 | Identical |
| BS EN 62115:2005+A12:2015 | Identical |
| BS EN 16232 : 2013 | CHILD USE AND CARE ARTICLES - INFANT SWINGS |
| EN 71-1:2014 | Safety of toys - Part 1: Mechanical and physical properties |
| UNI EN 16232 : 2013 | CHILD USE AND CARE ARTICLES - INFANT SWINGS |
| EN 71-2:2011+A1:2014 | Safety of toys - Part 2: Flammability |
| EN 50410:2008 | Household and similar electrical appliances - Safety - Particular requirements for decorative robots |
| I.S. EN 16232:2013 | CHILD USE AND CARE ARTICLES - INFANT SWINGS |
| CEN/CENELEC GUIDE 14 : 2009 | CHILD SAFETY - GUIDANCE FOR ITS INCLUSION IN STANDARDS |
| PREN 71-2 : DRAFT 2010 | SAFETY OF TOYS - PART 2: FLAMMABILITY |
| I.S. EN 50410:2008 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PARTICULAR REQUIREMENTS FOR DECORATIVE ROBOTS |
| I.S. EN 71-2:2011 | SAFETY OF TOYS - PART 2: FLAMMABILITY |
| DIN EN 71-2:2003-10 | SAFETY OF TOYS - PART 2: FLAMMABILITY |
| 10/30227074 DC : 0 | BS EN 71-2 - SAFETY OF TOYS - PART 2: FLAMMABILITY |
| 14/30301841 DC : 0 | BS EN 71-1 - SAFETY OF TOYS - PART 1: MECHANICAL AND PHYSICAL PROPERTIES |
| BS EN 71-1 : 2014 | SAFETY OF TOYS - PART 1: MECHANICAL AND PHYSICAL PROPERTIES |
| BS EN 50410:2008 | Household and similar electrical appliances. Safety. Particular requirements for decorative robots |
| 12/30265744 DC : 0 | BS EN 71-1:2011/A3 - SAFETY OF TOYS - PART 1: MECHANICAL AND PHYSICAL PROPERTIES |
| EN 16232:2013 | Child use and care articles - Infant swings |
| PREN 71-1 : DRAFT 2014 | SAFETY OF TOYS - PART 1: MECHANICAL AND PHYSICAL PROPERTIES |
| DIN EN 71-1:2015-02 | SAFETY OF TOYS - PART 1: MECHANICAL AND PHYSICAL PROPERTIES |
| 11/30237575 DC : 0 | BS EN 16232 - CHILD USE AND CARE ARTICLES - INFANT SWINGS |
| DIN EN 16232:2013-12 | CHILD USE AND CARE ARTICLES - INFANT SWINGS |
| I.S. EN 71-1:2014 | SAFETY OF TOYS - PART 1: MECHANICAL AND PHYSICAL PROPERTIES |
| BS EN 71-2 : 2011 | SAFETY OF TOYS - PART 2: FLAMMABILITY |
| UNE-EN 71-1:2015 | Safety of toys - Part 1: Mechanical and physical properties |
| UNI EN 71-2 : 2014 | SAFETY OF TOYS - PART 2: FLAMMABILITY |
| CEI EN 50410 : 2008 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PARTICULAR REQUIREMENTS FOR DECORATIVE ROBOTS |
| UNI EN 71-1 : 2015 | SAFETY OF TOYS - PART 1: MECHANICAL AND PHYSICAL PROPERTIES |
| DIN EN 71-2:2014-07 | Safety of toys - Part 2: Flammability (includes Amendment A1:2014) |
| UNE-EN 71-2:2011 | Safety of toys - Part 2: Flammability |
| IEC 60335-2-82:2017 | Household and similar electrical appliances - Safety - Part 2-82: Particular requirements for amusement machines and personal service machines |
| IEC 60598-2-10:2003 | Luminaires - Part 2-10: Particular requirements - Portable luminaires for children |
| EN 60068-2-75:2014 | Environmental testing - Part 2-75: Tests - Test Eh: Hammer tests |
| IEC 60738-1:2006+AMD1:2009 CSV | Thermistors - Directly heated positive temperature coefficient -Part 1: Generic specification |
| EN 61558-2-16:2009/A1:2013 | SAFETY OF TRANSFORMERS, REACTORS, POWER SUPPLY UNITS AND SIMILAR PRODUCTS FOR SUPPLY VOLTAGES UP TO 1 100 V - PART 2-16: PARTICULAR REQUIREMENTS AND TESTS FOR SWITCH MODE POWER SUPPLY UNITS AND TRANSFORMERS FOR SWITCH MODE POWER SUPPLY UNITS (IEC 61558-2-16:2009/A1:2013) |
| IEC 60384-14:2013+AMD1:2016 CSV | Fixed capacitors for use in electronic equipment - Part 14: Sectional specification - Fixed capacitors for electromagnetic interference suppression and connection to the supply mains |
| EN 60825-1:2014/AC:2017-06 | SAFETY OF LASER PRODUCTS - PART 1: EQUIPMENT CLASSIFICATION AND REQUIREMENTS (IEC 60825-1:2014) |
| IEC 60417-1:2002 | Graphical symbols for use on equipment - Part 1: Overview and application |
| EN 61000-4-11:2004/A1:2017 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-11: TESTING AND MEASUREMENT TECHNIQUES - VOLTAGE DIPS, SHORT INTERRUPTIONS AND VOLTAGE VARIATIONS IMMUNITY TESTS (IEC 61000-4-11:2004/A1:2017) |
| EN 60695-10-2:2014 | Fire hazard testing - Part 10-2: Abnormal heat - Ball pressure test method |
| IEC GUIDE 117:2010 | Electrotechnical equipment - Temperatures of touchable hot surfaces |
| IEC 61000-4-11:2004+AMD1:2017 CSV | Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests |
| EN 60738-1:2006/A1:2009 | THERMISTORS - DIRECTLY HEATED POSITIVE TEMPERATURE COEFFICIENT - PART 1: GENERIC SPECIFICATION |
| IEC 61558-2-16:2009+AMD1:2013 CSV | Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V - Part 2-16: Particularrequirements and tests for switch mode power supply units andtransformers for switch mode power supply units |
| IEC 60825-1:2014 | Safety of laser products - Part 1: Equipment classification and requirements |
| IEC 61000-4-4:2012 RLV | Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test |
| EN 61000-4-2:2009 | Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test |
| IEC 60695-2-11:2014 | Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end-products (GWEPT) |
| IEC 61558-2-6:2009 | Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V - Part 2-6: Particular requirements and tests for safety isolating transformers and power supply units incorporating safety isolating transformers |
| EN 60335-2-29:2004/A2:2010 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-29: PARTICULAR REQUIREMENTS FOR BATTERY CHARGERS |
| IEC 60695-2-13:2010+AMD1:2014 CSV | Fire hazard testing - Part 2-13: Glowing/hot-wire based test methods- Glow-wire ignition temperature (GWIT) test method for materials |
| IEC 61000-4-6:2013 | Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields |
| EN 61000-4-3 : 2006 AMD 2 2010 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-3: TESTING AND MEASUREMENT TECHNIQUES - RADIATED, RADIO-FREQUENCY, ELECTROMAGNETIC FIELD IMMUNITY TEST |
| EN 60695-2-13:2010/A1:2014 | FIRE HAZARD TESTING - PART 2-13: GLOWING/HOT-WIRE BASED TEST METHODS - GLOW-WIRE IGNITION TEMPERATURE (GWIT) TEST METHOD FOR MATERIALS (IEC 60695-2-13:2010/A1:2014) |
| CEN/CLC Guide 29:2014 | CEN/CENELEC Workshop Agreements |
| EN 62233:2008/corrigendum Aug. 2008 | MEASUREMENT METHODS FOR ELECTROMAGNETIC FIELDS OF HOUSEHOLD APPLIANCES AND SIMILAR APPARATUS WITH REGARD TO HUMAN EXPOSURE |
| EN 71-1:2014 | Safety of toys - Part 1: Mechanical and physical properties |
| IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
| ISO 9772:2012 | Cellular plastics Determination of horizontal burning characteristics of small specimens subjected to a small flame |
| IEC 61058-1:2016 | Switches for appliances - Part 1: General requirements |
| EN 61558-2-7:2007 | Safety of power transformers, power supplies, reactors and similar products - Part 2-7: Particular requirements and tests for transformers and power supplies for toys |
| IEC 61000-4-2:2008 | Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test |
| IEC 60695-11-10:2013 | Fire hazard testing - Part 11-10: Test flames - 50 W horizontal and vertical flame test methods |
| IEC 61000-4-3:2006+AMD1:2007+AMD2:2010 CSV | Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test |
| EN 61032:1998 | Protection of persons and equipment by enclosures - Probes for verification |
| IEC 60086-2:2015 | Primary batteries - Part 2: Physical and electrical specifications |
| EN 60086-2:2016 | Primary batteries - Part 2: Physical and electrical specifications |
| IEC 60335-2-29:2016 | Household and similar electrical appliances - Safety - Part 2-29: Particular requirements for battery chargers |
| IEC 60068-2-75:2014 | Environmental testing - Part 2-75: Tests - Test Eh: Hammer tests |
| EN 61058-1:2002/A2:2008 | SWITCHES FOR APPLIANCES - PART 1: GENERAL REQUIREMENTS |
| EN 61000-4-4:2012 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-4: TESTING AND MEASUREMENT TECHNIQUES - ELECTRICAL FAST TRANSIENT/BURST IMMUNITY TEST (IEC 61000-4-4:2012) |
| EN 61558-2-6:2009 | Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V - Part 2-6: Particular requirements and tests for safety isolating transformers and power supply units incorporating safety isolating transformers |
| EN 60335-1:2012/A13:2017 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60335-1:2010, MODIFIED) |
| EN 60799:1998 | Electrical accessories - Cord sets and interconnection cord sets |
| IEC 60695-10-2:2014 | Fire hazard testing - Part 10-2: Abnormal heat - Ball pressure test method |
| IEC 61180-1:1992 | High-voltage test techniques for low voltage equipment - Part 1: Definitions, test and procedure requirements |
| EN 61000-4-6:2014/AC:2015 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-6: TESTING AND MEASUREMENT TECHNIQUES - IMMUNITY TO CONDUCTED DISTURBANCES, INDUCED BY RADIO-FREQUENCY FIELDS (IEC 61000-4-6:2013) |
| EN 60529:1991/AC:2016-12 | DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015) |
| ISO 7000:2014 | Graphical symbols for use on equipment Registered symbols |
| EN 50410:2008 | Household and similar electrical appliances - Safety - Particular requirements for decorative robots |
| EN 60695-11-5:2017 | Fire hazard testing - Part 11-5: Test flames - Needle-flame test method - Apparatus, confirmatory test arrangement and guidance |
| IEC 61032:1997 | Protection of persons and equipment by enclosures - Probes for verification |
| IEC 60695-11-5:2016 | Fire hazard testing - Part 11-5: Test flames - Needle-flame test method - Apparatus, confirmatory test arrangement and guidance |
| EN 61000-4-13:2002/A2:2016 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-13: TESTING AND MEASUREMENT TECHNIQUES - HARMONICS AND INTERHARMONICS INCLUDING MAINS SIGNALLING AT A.C. POWER PORT, LOW FREQUENCY IMMUNITY TESTS (IEC 61000-4-13:2002/A2:2015) |
| IEC 62233:2005 | Measurement methods for electromagnetic fields of household appliances and similar apparatus with regard to human exposure |
| IEC 61000-4-13:2002+AMD1:2009+AMD2:2015 CSV | Electromagnetic compatibility (EMC) - Part 4-13: Testing and measurement techniques - Harmonics and interharmonics includingmains signalling at a.c. power port, low frequency immunity tests |
| IEC 61558-2-7:2007 | Safety of power transformers, power supplies, reactors and similar products - Part 2-7: Particular requirements and tests for transformers and power supplies for toys |
| EN 61180-1:1994 | High-voltage test techniques for low-voltage equipment - Part 1: Definitions, test and procedure requirements |
| IEC 60990:2016 | Methods of measurement of touch current and protective conductor current |
| EN 60695-2-11:2014 | Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end-products (GWEPT) (IEC 60695-2-11:2014) |
| EN 60990:2016 | Methods of measurement of touch current and protective conductor current |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.