EN 62138:2009
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
NUCLEAR POWER PLANTS - INSTRUMENTATION AND CONTROL IMPORTANT FOR SAFETY - SOFTWARE ASPECTS FOR COMPUTER-BASED SYSTEMS PERFORMING CATEGORY B OR C FUNCTIONS
03-10-2019
12-01-2013
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviations
4 Key concepts and assumptions
5 Requirements for the software of I&C systems performing
category C functions
6 Requirements for the software of I&C systems performing
category B functions
Annex ZA (normative) - Normative references to international
publications with their corresponding
European publications
Bibliography
Describes the requirements for the software of computer-based I&C systems performing functions of safety category B or C as defined by IEC 61226.
Committee |
TC 45AX
|
DocumentType |
Standard
|
PublisherName |
European Committee for Standards - Electrical
|
Status |
Superseded
|
SupersededBy |
Standards | Relationship |
IEC 62138:2004 | Identical |
NBN EN 62138 : 2009 | Identical |
I.S. EN 62138:2009 | Identical |
PN EN 62138 : 2009 | Identical |
VDE 0491-3-3 : 2010 | Identical |
DIN EN 62138 : 2010 | Identical |
BS EN 62138:2009 | Identical |
CEI EN 62138 : 2011 | Identical |
NF EN 62138 : 2009 | Identical |
OVE/ONORM EN 62138 : 2010 | Identical |
PNE-prEN 62138 | Identical |
UNE-EN 62138:2009 | Identical |
NEN EN IEC 62138 : 2009 | Identical |
BS EN 61226:2010 | Nuclear power plants. Instrumentation and control important to safety. Classification of instrumentation and control functions |
EN 60671:2011 | Nuclear power plants - Instrumentation and control systems important to safety - Surveillance testing |
EN 62566:2014 | Nuclear power plants - Instrumentation and control important to safety - Development of HDL-programmed integrated circuits for systems performing category A functions |
BS EN 60671:2011 | Nuclear power plants. Instrumentation and control systems important to safety. Surveillance testing |
EN 61226:2010 | Nuclear power plants - Instrumentation and control important to safety - Classification of instrumentation and control functions |
EN 60987:2015 | Nuclear power plants - Instrumentation and control important to safety - Hardware design requirements for computer-based systems |
VDI/VDE 3528 Blatt 1:2017-06 | Requirements of commercial grade products and criteria for their use in the instrumentation and control systems important to safety in nuclear power plants - General part |
CEI EN 60671 : 2012 | NUCLEAR POWER PLANTS - INSTRUMENTATION AND CONTROL SYSTEMS IMPORTANT TO SAFETY - SURVEILLANCE TESTING |
I.S. EN 60671:2011 | NUCLEAR POWER PLANTS - INSTRUMENTATION AND CONTROL SYSTEMS IMPORTANT TO SAFETY - SURVEILLANCE TESTING |
BS EN 60987:2015 | Nuclear power plants. Instrumentation and control important to safety. Hardware design requirements for computer-based systems |
BS EN 62566:2014 | Nuclear power plants. Instrumentation and control important to safety. Development of HDL-programmed integrated circuits for systems performing category A functions |
EN 62765-1:2017 | Nuclear powers plants - Instrumentation and control important to safety - Management of ageing of sensors and transmitters - Part 1: Pressure transmitters |
I.S. EN 61513:2013 | NUCLEAR POWER PLANTS - INSTRUMENTATION AND CONTROL IMPORTANT TO SAFETY - GENERAL REQUIREMENTS FOR SYSTEMS (IEC 61513:2011 (EQV)) |
BS EN 61513:2013 | Nuclear power plants. Instrumentation and control important to safety. General requirements for systems |
I.S. EN 60987:2015 | NUCLEAR POWER PLANTS - INSTRUMENTATION AND CONTROL IMPORTANT TO SAFETY - HARDWARE DESIGN REQUIREMENTS FOR COMPUTER-BASED SYSTEMS |
CEI EN 61513 : 2013 | NUCLEAR POWER PLANTS - INSTRUMENTATION AND CONTROL IMPORTANT TO SAFETY - GENERAL REQUIREMENT FOR SYSTEMS |
I.S. EN 61226:2010 | NUCLEAR POWER PLANTS - INSTRUMENTATION AND CONTROL IMPORTANT TO SAFETY - CLASSIFICATION OF INSTRUMENTATION AND CONTROL FUNCTIONS |
I.S. EN 62566:2014 | NUCLEAR POWER PLANTS - INSTRUMENTATION AND CONTROL IMPORTANT TO SAFETY - DEVELOPMENT OF HDL-PROGRAMMED INTEGRATED CIRCUITS FOR SYSTEMS PERFORMING CATEGORY A FUNCTIONS |
I.S. EN 62765-1:2017 | NUCLEAR POWERS PLANTS - INSTRUMENTATION AND CONTROL IMPORTANT TO SAFETY - MANAGEMENT OF AGEING OF SENSORS AND TRANSMITTERS - PART 1: PRESSURE TRANSMITTERS |
BS EN 62765-1:2017 | Nuclear powers plants. Instrumentation and control important to safety. Management of ageing of sensors and transmitters Pressure transmitters |
EN 61513:2013 | Nuclear power plants - Instrumentation and control important to safety - General requirements for systems |
IEC 61226:2009 | Nuclear power plants - Instrumentation and control important to safety - Classification of instrumentation and control functions |
IEC 61511-1:2016+AMD1:2017 CSV | Functional safety - Safety instrumented systems for the process industry sector - Part 1: Framework, definitions, system, hardware and application programming requirements |
IEC 61508-4:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 4: Definitions and abbreviations (see Functional Safety and IEC 61508) |
IEC 61508-3:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 3: Software requirements (see Functional Safety and IEC 61508) |
ISO/IEC 12207:2008 | Systems and software engineering — Software life cycle processes |
IEC 60880-2:2000 | Software for computers important to safety for nuclear power plants - Part 2: Software aspects of defence against common cause failures, use of software tools and of pre-developed software |
IEC 60880:2006 | Nuclear power plants - Instrumentation and control systems important to safety - Software aspects for computer-based systems performing category A functions |
ISO 9001:2015 | Quality management systems — Requirements |
IEC 61513:2011 | Nuclear power plants - Instrumentation and control important to safety - General requirements for systems |
ISO 9000-3:1997 | Quality management and quality assurance standards Part 3: Guidelines for the application of ISO 9001:1994 to the development, supply, installation and maintenance of computer software |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.