IEC 61508-3:2010

Current

Current The latest, up-to-date edition.

Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 3: Software requirements (see Functional Safety and IEC 61508)

Available format(s): Hardcopy, PDF, PDF 3 Users, PDF 5 Users, PDF 9 Users

Language(s): English - French, Spanish, Castilian

Published date: 30-04-2010

Publisher: International Electrotechnical Committee

Table of Contents - (Show below) - (Hide below)

FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Definitions and abbreviations
4 Conformance to this standard
5 Documentation
6 Additional requirements for management of
  safety-related software
7 Software safety lifecycle requirements
8 Functional safety assessment
Annex A (normative) - Guide to the selection of
        techniques and measures
Annex B (informative) - Detailed tables
Annex C (informative) - Properties for software
        systematic capability
Annex D (normative) - Safety manual for compliant items
        - additional requirements for software elements
Annex E (informative) - Relationships between
        IEC 61508-2 and IEC 61508-3
Annex F (informative) - Techniques for achieving
        non-interference between software elements
        on a single computer
Annex G (informative) - Guidance for tailoring lifecycles
        associated with data driven systems
Bibliography

Abstract - (Show below) - (Hide below)

IEC 61508-3:2010 applies to any software forming part of a safety-related system or used to develop a safety-related system within the scope of IEC 61508-1 and IEC 61508-2; provides specific requirements applicable to support tools used to develop and configure a safety-related system within the scope of IEC 61508-1 and IEC 61508-2; requires that the software safety functions and software systematic capability are specified; establishes requirements for safety lifecycle phases and activities which shall be applied during the design and development of the safety-related software. These requirements include the application of measures and techniques, which are graded against the required systematic capability, for the avoidance of and control of faults and failures in the software; provides requirements for information relating to the software aspects of system safety validation to be passed to the organisation carrying out the E/E/PE system integration; provides requirements for the preparation of information and procedures concerning software needed by the user for the operation and maintenance of the E/E/PE safety-related system; provides requirements to be met by the organisation carrying out modifications to safety-related software; provides, in conjunction with IEC 61508-1 and IEC 61508-2, requirements for support tools such as development and design tools, language translators, testing and debugging tools, configuration management tools. This second edition cancels and replaces the first edition published in 1998. This edition constitutes a technical revision. It has been subject to a thorough review and incorporates many comments received at the various revision stages. It has the status of a basic safety publication according to IEC Guide 104.

NEW! Also available: IEC Standards+ 61508:2010, containing all parts, together with a commented Redline version. Changes made in this 2nd edition are highlighted and commented by a leading world expert.

This publication is of high relevance for Smart Grid.

General Product Information - (Show below) - (Hide below)

Committee	TC 65/SC 65A
Development Note	Stability Date: 2017. (09/2017)
Document Type	Standard
ISBN
Pages
Published
Publisher	International Electrotechnical Committee
Status	Current
Supersedes	IEC 61508-3:1998/COR1:1999 IEC 61508-3:1998

International Equivalents – Equivalent Standard(s) & Relationship - (Show below) - (Hide below)

Equivalent Standard(s)	Relationship
GOST R IEC 61508-3 : 2012	Identical
NF EN 61508-3 : 2011	Identical
NBN EN 61508-3 : 2010	Identical
NEN EN IEC 61508-3 : 2010	Identical
SANS 61508-3 : 1ED 2013	Identical
VDE 0803-3 : 2011	Identical
UNE-EN 61508-3:2011	Identical
AS 61508.3-2011	Identical
EN 61508-3:2010	Identical
DIN EN 61508-3 : 2011	Identical
BS EN 61508-3:2010	Identical
NEN IEC 61508-3 : 99 C1 99	Similar to
CEI EN 61508-3 : 2011	Identical
PN EN 61508-3 : 2010	Identical
BS IEC 61508-3 : 1998 AMD 13781	Identical
I.S. EN 61508-3:2010	Identical
BIS IS/IEC 61508-3 : 1998	Identical

Standards Referenced By This Book - (Show below) - (Hide below)

I.S. EN 60335-1:2012	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 1: GENERAL REQUIREMENTS
NF EN 50348 : 2010	STATIONARY ELECTROSTATIC APPLICATION EQUIPMENT FOR NON-IGNITABLE LIQUID COATING MATERIAL - SAFETY REQUIREMENTS
UNE-EN 60947-5-3:2014	Low-voltage switchgear and controlgear - Part 5-3: Control circuit devices and switching elements - Requirements for proximity devices with defined behaviour under fault conditions (PDDB)
UNE-EN 61508-5:2011	Functional safety of electrical/electronic/programmable electronic safety-related systems -- Part 5: Examples of methods for the determination of safety integrity levels
I.S. EN 61508-4:2010	FUNCTIONAL SAFETY OF ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY-RELATED SYSTEMS - PART 4: DEFINITIONS AND ABBREVIATIONS
BS EN 50156-2:2015	Electrical equipment for furnaces and ancillary equipment Requirements for design, development and type approval of safety devices and subsystems
BS EN 61226:2010	Nuclear power plants. Instrumentation and control important to safety. Classification of instrumentation and control functions
09/30183366 DC : 0	BS EN 13611:2007/A1 - SAFETY AND CONTROL DEVICES FOR GAS BURNERS AND GAS BURNING APPLIANCES - GENERAL REQUIREMENTS
ISO/TR 12489:2013	Petroleum, petrochemical and natural gas industries Reliability modelling and calculation of safety systems
BS EN 60079-29-3:2014	Explosive atmospheres Gas detectors. Guidance on functional safety of fixed gas detection systems
BS EN 62138:2009	NUCLEAR POWER PLANTS - INSTRUMENTATION AND CONTROL IMPORTANT FOR SAFETY - SOFTWARE ASPECTS FOR COMPUTER-BASED SYSTEMS PERFORMING CATEGORY B OR C FUNCTIONS
16/30323859 DC : 0	BS ISO 22201-2 - LIFTS (ELEVATORS), ESCALATORS AND MOVING WALKS - PROGRAMMABLE ELECTRONIC SYSTEMS IN SAFETY RELATED APPLICATIONS - PART 2: ESCALATORS AND MOVING WALKS (PESSRAE)
PD CLC/TR 62685:2011	Industrial communication networks. Profiles. Assessment guideline for safety devices using IEC 61784-3 functional safety communication profiles (FSCPs)
BS EN 60947-5-3:2013	Low-voltage switchgear and controlgear Control circuit devices and switching elements. Requirements for proximity devices with defined behaviour under fault conditions (PDDB)
BS EN ISO 80079-37:2016	Explosive atmospheres Non-electrical equipment for explosive atmospheres. Non-electrical type of protection constructional safety \'\'c\'\', control of ignition sources \'\'b\'\', liquid immersion \'\'k\'\'
03/119040 DC : DRAFT NOV 2003	PREN 1010-1 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 1: COMMON REQUIREMENTS
CEI EN 61131-6 : 2013	PROGRAMMABLE CONTROLLERS - PART 6: FUNCTIONAL SAFETY
BS EN 50402:2017	Electrical apparatus for the detection and measurement of combustible or toxic gases or vapours or of oxygen. Requirements on the functional safety of gas detection systems
DD CEN/TS 13763-27:2003	EXPLOSIVES FOR CIVIL USES - DETONATORS AND RELAYS - PART 27: DEFINITIONS, METHODS AND REQUIREMENTS FOR ELECTRONIC INITIATION SYSTEMS
BS TICKIT GUIDE : ISSUE 5.5	A GUIDE TO SOFTWARE QUALITY MANAGEMENT SYSTEM CONSTRUCTION AND CERTIFICATION TO ISO 9001:2000
IEC 60965:2016	Nuclear power plants - Control rooms - Supplementary control room for reactor shutdown without access to the main control room
CEI EN 60947-5-3 : 2014	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-3: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - REQUIREMENTS FOR PROXIMITY DEVICES WITH DEFINED BEHAVIOUR UNDER FAULT CONDITIONS (PDDB)
11/30251720 DC : 0	BS EN 81-50 - SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - EXAMINATIONS AND TESTS - PART 50: DESIGN RULES, CALCULATIONS, EXAMINATIONS AND TESTS OF LIFT COMPONENTS
05/30134150 DC : DRAFT MAY 2005	EN 15233 - METHODOLOGY FOR FUNCTIONAL SAFETY ASSESSMENT OF PROTECTIVE SYSTEMS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES
BS EN 50090-2-3:2005	HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) - PART 2-3: SYSTEM OVERVIEW - GENERAL FUNCTIONAL SAFETY REQUIREMENTS FOR PRODUCTS INTENDED TO BE INTEGRATED IN HBES
03/118984 DC : 0	ISO 15998 - EARTH-MOVING MACHINERY - MACHINE-CONTROL SYSTEMS (MCS) USING ELECTRONIC COMPONENTS - PERFORMANCE CRITERIA AND TESTS
BS EN 61508-6:2010	Functional safety of electrical/electronic/ programmable electronic safety related systems Guidelines on the application of IEC 61508-2 and IEC 61508-3
BS PD IEC TR 61508-0 : 2005	FUNCTIONAL SAFETY OF ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY-RELATED SYSTEMS - PART 0: FUNCTIONAL SAFETY AND IEC 61508
CEI EN 61784-3-1 : 2012	INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 3-1: FUNCTIONAL SAFETY FIELDBUSES - ADDITIONAL SPECIFICATIONS FOR CPF 1
I.S. EN ISO 80079-37:2016	EXPLOSIVE ATMOSPHERES - PART 37: NON-ELECTRICAL EQUIPMENT FOR EXPLOSIVE ATMOSPHERES - NON-ELECTRICAL TYPE OF PROTECTION CONSTRUCTIONAL SAFETY ''C'', CONTROL OF IGNITION SOURCES ''B'', LIQUID IMMERSION ''K'' (ISO/DIS 80079-37:2014)
17/30337986 DC : 0	BS EN ISO 20815 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - PRODUCTION ASSURANCE AND RELIABILITY MANAGEMENT
09/30197984 DC : 0	BS EN 1807-2 - SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES - PART 2: LOG SAWING MACHINES
BS PD IEC TR 62685 : 2010	INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - ASSESSMENT GUIDELINE FOR SAFETY DEVICES USING IEC 61784-3 FUNCTIONAL SAFETY COMMUNICATION PROFILES (FSCPS)
BS EN 50270:2015	Electromagnetic compatibility. Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen
I.S. EN 50090-2-3:2005	HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) - PART 2-3: SYSTEM OVERVIEW - GENERAL FUNCTIONAL SAFETY REQUIREMENTS FOR PRODUCTS INTENDED TO BE INTEGRATED IN HBES
BS IEC 61508-7 : 2000 AMD 13785	FUNCTIONAL SAFETY OF ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY-RELATED SYSTEMS - PART 7: OVERVIEW OF TECHNIQUES AND MEASURES
08/30193509 DC : DRAFT NOV 2008	BS EN 61508-2 - FUNCTIONAL SAFETY OF ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY-RELATED SYSTEMS - PART 2: REQUIREMENTS FOR ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY-RELATED SYSTEMS
I.S. EN 61508-2:2010	FUNCTIONAL SAFETY OF ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY-RELATED SYSTEMS - PART 2: REQUIREMENTS FOR ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY-RELATED SYSTEMS
DIN EN 50402 : 2018	ELECTRICAL APPARATUS FOR THE DETECTION AND MEASUREMENT OF COMBUSTIBLE OR TOXIC GASES OR VAPOURS OR OF OXYGEN - REQUIREMENTS ON THE FUNCTIONAL SAFETY OF GAS DETECTION SYSTEMS
UNI EN 81-40 : 2009	SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - SPECIAL LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 40: STAIR LIFTS AND INCLINED LIFTING PLATFORMS INTENDED FOR PERSONS WITH IMPAIRED MOBILITY
04/30111616 DC : 0	EN 81-40 - SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - SPECIAL LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 40: STAIRLIFTS AND INCLINED LIFTING PLATFORMS INTENDED FOR PERSONS WITH IMPAIRED MOBILITY
I.S. EN 61508-5:2010	FUNCTIONAL SAFETY OF ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY-RELATED SYSTEMS - PART 5: EXAMPLES OF METHODS FOR THE DETERMINATION OF SAFETY INTEGRITY
CSA ISO/IEC 16085 : 2007 : R2012	SYSTEMS AND SOFTWARE ENGINEERING - LIFE CYCLE PROCESSES - RISK MANAGEMENT
CSA ISO/IEC 16085 : 2007	SYSTEMS AND SOFTWARE ENGINEERING - LIFE CYCLE PROCESSES - RISK MANAGEMENT
I.S. EN 60044-8:2002	INSTRUMENT TRANSFORMERS - PART 8: ELECTRONIC CURRENT TRANSFORMERS
BS EN 60044-8:2002	Instrument transformers Electronic current transformers
CEI EN 50495 : 2011	SAFETY DEVICES REQUIRED FOR THE SAFE FUNCTIONING OF EQUIPMENT WITH RESPECT TO EXPLOSION RISKS
CSA C60044-8 : 2007 : R2016	INSTRUMENT TRANSFORMERS - PART 8: ELECTRONIC CURRENT TRANSFORMERS
API RP 14C : 2017	ANALYSIS, DESIGN, INSTALLATION, AND TESTING OF SAFETY SYSTEMS FOR OFFSHORE PRODUCTION FACILITIES
I.S. EN 61162-402:2005	MARITIME NAVIGATION AND RADIOCOMMUNICATION EQUIPMENT AND SYSTEMS - DIGITAL INTERFACES - PART 402: MULTIPLE TALKERS AND MULTIPLE LISTENERS - SHIP SYSTEMS INTERCONNECTION - DOCUMENTATION AND TEST REQUIREMENTS
I.S. EN 1012-3:2013	COMPRESSORS AND VACUUM PUMPS - SAFETY REQUIREMENTS - PART 3: PROCESS COMPRESSORS
I.S. EN 415-10:2014	SAFETY OF PACKAGING MACHINES - PART 10: GENERAL REQUIREMENTS
CSA HPIT 2-2017	Dispensing systems and components for fueling hydrogen powered industrial trucks
I.S. EN 61869-6:2016	INSTRUMENT TRANSFORMERS - PART 6: ADDITIONAL GENERAL REQUIREMENTS FOR LOW-POWER INSTRUMENT TRANSFORMERS
S.R. CEN ISO/TR 12489:2016	PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - RELIABILITY MODELLING AND CALCULATION OF SAFETY SYSTEMS (ISO/TR 12489:2013)
I.S. EN 61508-7:2010	FUNCTIONAL SAFETY OF ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY-RELATED SYSTEMS - PART 7: OVERVIEW OF TECHNIQUES AND MEASURES
NF EN 81-50 : 2014	SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - EXAMINATIONS AND TESTS - PART 50: DESIGN RULES, CALCULATIONS, EXAMINATIONS AND TESTS OF LIFT COMPONENTS
UNI EN ISO 20815 : 2010	PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - PRODUCTION ASSURANCE AND RELIABILITY MANAGEMENT
I.S. EN 62628:2012	GUIDANCE ON SOFTWARE ASPECTS OF DEPENDABILITY (IEC 62628:2012 (EQV))
BS EN ISO 20815:2010	PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - PRODUCTION ASSURANCE AND RELIABILITY MANAGEMENT
NF EN 61508-2 : 2011	FUNCTIONAL SAFETY OF ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY-RELATED SYSTEMS - PART 2: REQUIREMENTS FOR ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY-RELATED SYSTEMS
VDE 0400-70 : 2018	ELECTRICAL APPARATUS FOR THE DETECTION AND MEASUREMENT OF COMBUSTIBLE OR TOXIC GASES OR VAPOURS OR OF OXYGEN - REQUIREMENTS ON THE FUNCTIONAL SAFETY OF GAS DETECTION SYSTEMS
CEI EN 61508-5 : 2011	FUNCTIONAL SAFETY OF ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETYRELATED SYSTEMS - PART 5: EXAMPLES OF METHODS FOR THE DETERMINATION OF SAFETY INTEGRITY LEVELS
DIN EN ISO/IEC 80079-38:2012-08 (Draft)	EXPLOSIVE ATMOSPHERES - PART 38: EQUIPMENT AND COMPONENTS IN EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES (ISO/IEC 80079-38:2016)
EN 60335-1:2012/A13:2017	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60335-1:2010, MODIFIED)
DIN EN 415-7:2009-12	Safety of packaging machines - Part 7: Group and secondary packaging machines (includes Amendment A1:2008)
DIN EN 12953-9:2007-09	Shell boilers - Part 9: Requirements for limiting devices of the boiler and accessories
17/30356606 DC : 0	BS ISO 8100-1 - LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 1: SAFETY REQUIREMENTS FOR PASSENGER AND GOODS PASSENGER LIFTS
UNI EN 81-22 : 2014	SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 22: ELECTRIC LIFTS WITH INCLINED PATH
IEC 61508-6:2010	Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 6: Guidelines on the application of IEC 61508-2 and IEC 61508-3 (see Functional Safety and IEC 61508)
EN 62138 : 2009	NUCLEAR POWER PLANTS - INSTRUMENTATION AND CONTROL IMPORTANT FOR SAFETY - SOFTWARE ASPECTS FOR COMPUTER-BASED SYSTEMS PERFORMING CATEGORY B OR C FUNCTIONS
EN 62304:2006/A1:2015	MEDICAL DEVICE SOFTWARE - SOFTWARE LIFE-CYCLE PROCESSES (IEC 62304:2006/A1:2015)
EN 1010-1:2004+A1:2010	Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 1: Common requirements
EN 13463-6 : 2005	NON-ELECTRICAL EQUIPMENT FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES - PART 6: PROTECTION BY CONTROL OF IGNITION SOURCE 'B'
DIN EN 81-2:2000-05	SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PART 2: HYDRAULIC LIFTS
EN 61162-402:2005	Maritime navigation and radiocommunication equipment and systems - Digital interfaces - Part 402: Multiple talkers and multiple listeners - Ship systems interconnection - Documentation and test requirements
EN 60965:2016	Nuclear power plants - Control rooms - Supplementary control room for reactor shutdown without access to the main control room
EN 61131-6:2012	Programmable controllers - Part 6: Functional safety
EN 61508-2:2010	Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 2: Requirements for electrical/electronic/programmable electronic safety-related systems
EN 61784-3-1:2010	Industrial communication networks - Profiles - Part 3-1: Functional safety fieldbuses - Additional specifications for CPF 1
EN 60730-1:2016	Automatic electrical controls - Part 1: General requirements
EN 60300-3-4:2008	Dependability management - Part 3-4: Application guide - Guide to the specification of dependability requirements
EN 12952-11:2007	Water-tube boilers and auxiliary installations - Part 11: Requirements for limiting devices of the boiler and accessories
IEC 61511-2:2016 RLV	Functional safety - Safety instrumented systems for the process industry sector - Part 2: Guidelines for the application of IEC 61511-1:2016
CEN/TS 15260:2006	Health informatics - Classification of safety risks from health informatics products
EN 61869-6:2016	Instrument transformers - Part 6: Additional general requirements for low-power instrument transformers
EN 61508-6:2010	Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 6: Guidelines on the application of IEC 61508-2 and IEC 61508-3
EN 61557-15:2014	Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 15: Functional safety requirements for insulation monitoring devices in IT systems and equipment for insulation fault location in IT systems
EN 61800-5-2:2017	Adjustable speed electrical power drive systems - Part 5-2: Safety requirements - Functional
EN ISO 80079-37:2016	Explosive atmospheres - Part 37: Non-electrical equipment for explosive atmospheres - Non-electrical type of protection constructional safety 'c', control of ignition sources 'b', liquid immersion 'k' (ISO 80079-37:2016)
EN 50495:2010	Safety devices required for the safe functioning of equipment with respect to explosion risks
EN 12478:2000/AC:2001	SAFETY OF MACHINE TOOLS - LARGE NUMERICALLY CONTROLLED TURNING MACHINES AND TURNING CENTRES
EN 62808:2016	Nuclear power plants - Instrumentation and control systems important to safety - Design and qualification of isolation devices
I.S. EN 60965:2016	NUCLEAR POWER PLANTS - CONTROL ROOMS - SUPPLEMENTARY CONTROL ROOM FOR REACTOR SHUTDOWN WITHOUT ACCESS TO THE MAIN CONTROL ROOM
DIN EN ISO 80079-37 E : 2016	EXPLOSIVE ATMOSPHERES - PART 37: NON-ELECTRICAL EQUIPMENT FOR EXPLOSIVE ATMOSPHERES - NON-ELECTRICAL TYPE OF PROTECTION CONSTRUCTIONAL SAFETY 'C', CONTROL OF IGNITION SOURCES 'B', LIQUID IMMERSION 'K' (ISO 80079-37:2016)
NF EN 61131-6 : 2013	PROGRAMMABLE CONTROLLERS - PART 6: FUNCTIONAL SAFETY
BS EN 61511-2:2017	Functional safety. Safety instrumented systems for the process industry sector Guidelines for the application of IEC 61511-1
11/30247811 DC : 0	BS EN 415-10 - SAFETY OF PACKAGING MACHINES - PART 10: GENERAL REQUIREMENTS
I.S. CEN/TR 15281:2006	GUIDANCE ON INERTING FOR THE PREVENTION OF EXPLOSIONS
BS IEC 61500 : 2009	NUCLEAR POWER PLANTS - INSTRUMENTATION AND CONTROL IMPORTANT TO SAFETY - DATA COMMUNICATION IN SYSTEMS PERFORMING CATEGORY A FUNCTIONS
I.S. EN 62138:2009	NUCLEAR POWER PLANTS - INSTRUMENTATION AND CONTROL IMPORTANT FOR SAFETY - SOFTWARE ASPECTS FOR COMPUTER-BASED SYSTEMS PERFORMING CATEGORY B OR C FUNCTIONS
BS IEC 62808 : 2015	NUCLEAR POWER PLANTS - INSTRUMENTATION AND CONTROL SYSTEMS IMPORTANT TO SAFETY - DESIGN AND QUALIFICATION OF ISOLATION DEVICES
BS EN 61508-3:2010	Functional safety of electrical/electronic/ programmable electronic safety-related systems Software requirements
PD CEN ISO/TR 12489:2016 (published 2016-02)	Petroleum, petrochemical and natural gas industries. Reliability modelling and calculation of safety systems
06/30150265 DC : 0	EN 1474-1 - INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN AND TESTING OF MARINE TRANSFER SYSTEMS - PART 1: DESIGN AND TESTING OF TRANSFER ARMS
BS EN 61162-402:2005	MARITIME NAVIGATION AND RADIOCOMMUNICATION EQUIPMENT AND SYSTEMS - DIGITAL INTERFACES - PART 402: MULTIPLE TALKERS AND MULTIPLE LISTENERS - SHIP SYSTEMS INTERCONNECTION - DOCUMENTATION AND TEST REQUIREMENTS
08/30178810 DC : DRAFT MAY 2008	BS EN 12750 - SAFETY OF WOODWORKING MACHINES - FOUR SIDED MOULDING MACHINES
CEI EN 62628 : 2013	GUIDANCE ON SOFTWARE ASPECTS OF DEPENDABILITY
BS EN 61800-5-2:2017	Adjustable speed electrical power drive systems Safety requirements. Functional
CEI EN 61511-1 : 2007	FUNCTIONAL SAFETY - SAFETY INSTRUMENTED SYSTEMS FOR THE PROCESS - PART 1: FRAMEWORK, DEFINITIONS, SYSTEM, HARDWARE AND APPLICATION PROGRAMMING REQUIREMENTS
PD ISO/TR 27809:2007	Health informatics. Measures for ensuring patient safety of health software
BS EN 61131-6:2012	PROGRAMMABLE CONTROLLERS - PART 6: FUNCTIONAL SAFETY
17/30352678 DC : 0	BS IEC 63074 ED1.0 - SAFETY OF MACHINERY - SECURITY ASPECTS RELATED TO FUNCTIONAL SAFETY OF SAFETY-RELATED CONTROL SYSTEMS
I.S. EN 13611:2015	SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
I.S. EN 13463-6:2005	NON-ELECTRICAL EQUIPMENT FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES - PART 6: PROTECTION BY CONTROL OF IGNITION SOURCE 'B'
13/30278416 DC : 0	BS EN 61800-5-2 - ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 5-2: SAFETY REQUIREMENTS - FUNCTIONAL
BS IEC 61513:2011	Nuclear power plants. Instrumentation and control important to safety. General requirements for systems
09/30198762 DC : 0	BS EN 1807-1 - SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES - PART 1: TABLE BAND SAWS AND BAND RE-SAWS
BS EN 81-50:2014	Safety rules for the construction and installation of lifts. Examinations and tests Design rules, calculations, examinations and tests of lift components
14/30287753 DC : 0	BS EN 62304 AMENDMENT 1 - MEDICAL DEVICE SOFTWARE - SOFTWARE LIFE CYCLE PROCESSES
PREN 81-50 : DRAFT 2011	SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - EXAMINATIONS AND TESTS - PART 50: DESIGN RULES, CALCULATIONS, EXAMINATIONS AND TESTS OF LIFT COMPONENTS
11/30253360 DC : 0	BS EN ISO 13628-14 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 14: SUBSEA HIGH INTEGRITY PRESSURE PROTECTION SYSTEMS (HIPPS)
UNE-EN 62628:2015	Guidance on software aspects of dependability
12/30243465 DC : 0	BS ISO/IEC 80079-38 - EXPLOSIVE ATMOSPHERES - PART 38: EQUIPMENT AND COMPONENTS IN EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES
03/114995 DC : DRAFT SEP 2003	ISO 17894 - SHIPS AND MARINE TECHNOLOGY - COMPUTER APPLICATIONS - GENERAL PRINCIPLES FOR THE DEVELOPMENT AND USE OF PROGRAMMABLE ELECTRONIC SYSTEMS IN MARINE APPLICATIONS
05/30134105 DC : DRAFT MAY 2005	IEC 61800-5-2 - ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 5-2: SAFETY REQUIREMENTS - FUNCTIONAL
NF EN 60947-5-3 : 2014	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-3: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - REQUIREMENTS FOR PROXIMITY DEVICES WITH DEFINED BEHAVIOUR UNDER FAULT CONDITIONS (PDDB)
AAMI TIR32 : 2004 : R2016	MEDICAL DEVICE SOFTWARE RISK MANAGEMENT
BS EN 50223:2015	STATIONARY ELECTROSTATIC APPLICATION EQUIPMENT FOR IGNITABLE FLOCK MATERIAL - SAFETY REQUIREMENTS
BS IEC 61508-4 : 98 AMD 13782	FUNCTIONAL SAFETY OF ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY-RELATED SYSTEMS - DEFINITIONS AND ABBREVIATIONS
03/314812 DC : DRAFT SEP 2003	ISO 13628-1 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 1: GENERAL REQUIREMENTS AND RECOMMENDATIONS
BS EN 15333-1:2008	RESPIRATORY EQUIPMENT - OPEN-CIRCUIT UMBILICAL SUPPLIED COMPRESSED GAS DIVING APPARATUS - PART 1: DEMAND APPARATUS
BS ISO 22201-1:2017	Lifts (elevators), escalators and moving walks. Programmable electronic systems in safety-related applications Lifts (elevators) (PESSRAL)
ISO/TR 27809:2007	Health informatics Measures for ensuring patient safety of health software
PREN 50402 : DRAFT 2013	ELECTRICAL APPARATUS FOR THE DETECTION AND MEASUREMENT OF COMBUSTIBLE OR TOXIC GASES OR VAPOURS OR OF OXYGEN - REQUIREMENTS ON THE FUNCTIONAL SAFETY OF FIXED GAS DETECTION SYSTEMS
99/240939 DC : DRAFT MAR 99	BS EN 50330-1 PHOTOVOLTAIC SEMICONDUCTOR CONVERTORS - PART 1: UTILITY INTERACTIVE FAIL SAFE PROTECTIVE INTERFACE FOR PV-LINE COMMUTATED CONVERTORS - DESIGN QUALIFICATION AND TYPE APPROVAL
BS ISO/IEC 16085:2006	SYSTEMS AND SOFTWARE ENGINEERING - LIFE CYCLE PROCESSES - RISK MANAGEMENT
04/30031949 DC : DRAFT SEP 2004
BS EN 61784-3-1:2010	Industrial communication networks. Profiles Functional safety fieldbuses. Additional specifications for CPF 1
04/301783 DC : DRAFT JAN 2004	EN 848-3 - SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 3: NUMERICALLY CONTROLLED (NC) BORING MACHINES AND ROUTING MACHINES
I.S. EN 62061:2005	SAFETY OF MACHINERY - FUNCTIONAL SAFETY OF SAFETY-RELATED ELECTRICAL, ELECTRONIC AND PROGRAMMABLE ELECTRONIC CONTROL SYSTEMS
CEI EN 61508-7 : 2011	FUNCTIONAL SAFETY OF ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETYRELATED SYSTEMS - PART 7: OVERVIEW OF TECHNIQUES AND MEASURES
CEI EN 61508-1 : 2011	FUNCTIONAL SAFETY OF ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY-RELATED SYSTEMS - PART 1: GENERAL REQUIREMENTS
IEC 61800-5-2 REDLINE : 2ED 2016	ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 5-2: SAFETY REQUIREMENTS - FUNCTIONAL
API 554-2 : 2008	PROCESS CONTROL SYSTEMS - PROCESS CONTROL SYSTEM DESIGN
I.S. EN 61511-1:2017	FUNCTIONAL SAFETY - SAFETY INSTRUMENTED SYSTEMS FOR THE PROCESS INDUSTRY SECTOR - NORMATIVE (UON) - PART 1: FRAMEWORK, DEFINITIONS, SYSTEM, HARDWARE AND SOFTWARE REQUIREMENTS
CSA C60044-8 : 2007 : R2011	INSTRUMENT TRANSFORMERS - PART 8: ELECTRONIC CURRENT TRANSFORMERS
CAN/CSA-C22.2 NO. 61511-1:17	Functional safety — Safety instrumented systems for the process industry sector — Part 1: Framework, definitions, system, hardware and application programming requirements (Adopted IEC 61511-1:2016, second edition, 2016-02, with Canadian deviations) \| Sécurité fonctionnelle — Systèmes instrumentes de sécurité pour le secteur des industries de transformation — Partie 1 : Cadre, définitions, exigences pour le système, le matériel et la programmation d’application (norme IEC 61511-1:2016 adoptée, deuxième édition, 2016-02, avec exigences propres au Canada)
EN 50402:2017	Electrical apparatus for the detection and measurement of combustible or toxic gases or vapours or of oxygen - Requirements on the functional safety of gas detection systems
PREN 50330-1 : DRAFT 99	PHOTOVOLTAIC SEMICONDUCTOR CONVERTERS - PART 1: UTILITY INTERACTIVE FAIL SAFE PROTECTIVE INTERFACE FOR PV-LINE COMMUTATED CONVERTERS - DESIGN QUALIFICATION AND TYPE APPROVAL
IEC 61800-5-2:2016	Adjustable speed electrical power drive systems - Part 5-2: Safety requirements - Functional
ANSI B11.0 : 2015	SAFETY OF MACHINERY - GENERAL REQUIREMENTS AND RISK ASSESSMENT
BS EN ISO/IEC 80079-38 : 2016	EXPLOSIVE ATMOSPHERES - PART 38: EQUIPMENT AND COMPONENTS IN EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES (ISO/IEC 80079 38:2016)
IEC TR 62235:2005	Nuclear facilities - Instrumentation and control systems important to safety - Systems of interim storage and final repository of nuclear fuel and waste
ISO 20815:2008	Petroleum, petrochemical and natural gas industries Production assurance and reliability management
EN 61226:2010	Nuclear power plants - Instrumentation and control important to safety - Classification of instrumentation and control functions
BS EN 61508-5:2010	Functional safety of electrical/electronic/ programmable electronic safety related systems Examples of methods for the determination of safety integrity levels
I.S. EN 61508-3:2010	FUNCTIONAL SAFETY OF ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY-RELATED SYSTEMS - PART 3: SOFTWARE REQUIREMENTS
I.S. EN 50491-4-1:2012	GENERAL REQUIREMENTS FOR HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) AND BUILDING AUTOMATION AND CONTROL SYSTEMS (BACS) - PART 4-1: GENERAL FUNCTIONAL SAFETY REQUIREMENTS FOR PRODUCTS INTENDED TO BE INTEGRATED IN BUILDING ELECTRONIC SYSTEMS (HBES) AND BUILDING AUTOMATION AND CONTROL SYSTEMS (BACS)
I.S. EN 61000-1-2:2016	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 1-2: GENERAL - METHODOLOGY FOR THE ACHIEVEMENT OF FUNCTIONAL SAFETY OF ELECTRICAL AND ELECTRONIC SYSTEMS INCLUDING EQUIPMENT WITH REGARD TO ELECTROMAGNETIC PHENOMENA
I.S. EN 50156-1:2015	ELECTRICAL EQUIPMENT FOR FURNACES AND ANCILLARY EQUIPMENT - PART 1: REQUIREMENTS FOR APPLICATION DESIGN AND INSTALLATION
I.S. EN 61500:2011	NUCLEAR POWER PLANTS - INSTRUMENTATION AND CONTROL IMPORTANT TO SAFETY - DATA COMMUNICATION IN SYSTEMS PERFORMING CATEGORY A FUNCTIONS
BS EN 13611:2015	Safety and control devices for burners and appliances burning gaseous and/or liquid fuels. General requirements
ISO 22201-1:2017	Lifts (elevators), escalators and moving walks — Programmable electronic systems in safety-related applications — Part 1: Lifts (elevators) (PESSRAL)
DIN EN 81-40:2009-04	SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - SPECIAL LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 40: STAIRLIFTS AND INCLINED LIFTING PLATFORMS INTENDED FOR PERSONS WITH IMPAIRED MOBILITY
17/30360051 DC : 0	BS EN 13611 - SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
NF EN 61508-1 : 2011	FUNCTIONAL SAFETY OF ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY-RELATED SYSTEMS - PART 1: GENERAL REQUIREMENTS
NF EN 50271 : 2010	ELECTRICAL APPARATUS FOR THE DETECTION AND MEASUREMENT OF COMBUSTIBLE GASES, TOXIC GASES OR OXYGEN - REQUIREMENTS AND TESTS FOR APPARATUS USING SOFTWARE AND/OR DIGITAL TECHNOLOGIES
UNE-EN 61508-4:2011	Functional safety of electrical/electronic/programmable electronic safety-related systems -- Part 4: Definitions and abbreviations
NF EN 61508-6 : 2011	FUNCTIONAL SAFETY OF ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY-RELATED SYSTEMS - PART 6: GUIDELINES ON THE APPLICATION OF IEC 61508-2 AND IEC 61508-3
UNE-EN 50271:2011	Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen - Requirements and tests for apparatus using software and/or digital technologies
CLC/TR 62685 : 2011	INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - ASSESSMENT GUIDELINE FOR SAFETY DEVICES USING IEC 61784-3 FUNCTIONAL SAFETY COMMUNICATION PROFILES (FSCPS) (IEC/TR 62685:2010)
I.S. EN 62765-1:2017	NUCLEAR POWERS PLANTS - INSTRUMENTATION AND CONTROL IMPORTANT TO SAFETY - MANAGEMENT OF AGEING OF SENSORS AND TRANSMITTERS - PART 1: PRESSURE TRANSMITTERS
S.R. CWA 15902-1:2009	LIFTING AND LOAD-BEARING EQUIPMENT FOR STAGES AND OTHER PRODUCTION AREAS WITHIN THE ENTERTAINMENT INDUSTRY - PART 1: GENERAL REQUIREMENTS (EXCLUDING ALUMINIUM AND STEEL TRUSSES AND TOWERS)
DIN EN 1010-1:2011-06	Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 1: Common requirements (includes Amendment A1:2010)
DIN EN 81-20 E : 2014	SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 20: PASSENGER AND GOODS PASSENGER LIFTS
DIN EN 15233:2007-11	Methodology for functional safety assessment of protective systems for potentially explosive atmospheres
IEC 61508-7:2010	Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 7: Overview of techniques and measures (see Functional Safety and IEC 61508)
BS EN 15233:2007	Methodology for functional safety assessment of protective systems for potentially explosive atmospheres
UNE-EN 61508-7:2011	Functional safety of electrical/electronic/programmable electronic safety-related systems -- Part 7: Overview of techniques and measures
BS EN 746-2:2010	Industrial thermoprocessing equipment Safety requirements for combustion and fuel handling systems
UNE-EN 81-20:2017	Safety rules for the construction and installation of lifts - Lifts for the transport of persons and goods - Part 20: Passenger and goods passenger lifts
I.S. EN ISO 14224:2016	PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - COLLECTION AND EXCHANGE OF RELIABILITY AND MAINTENANCE DATA FOR EQUIPMENT (ISO 14224:2016)
I.S. EN 14143:2013	RESPIRATORY EQUIPMENT - SELF-CONTAINED RE-BREATHING DIVING APPARATUS
DIN EN 1870-1:1999-07	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 1: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE), DIMENSION SAWS AND BUILDING SITE SAWS
I.S. EN 746-2:2010	INDUSTRIAL THERMOPROCESSING EQUIPMENT - PART 2: SAFETY REQUIREMENTS FOR COMBUSTION AND FUEL HANDLING SYSTEMS
DIN EN 13611:2019-06	Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - General requirements
I.S. EN ISO 13849-1:2015	SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 1: GENERAL PRINCIPLES FOR DESIGN (ISO 13849-1:2015)
I.S. EN 14180:2014	STERILIZERS FOR MEDICAL PURPOSES - LOW TEMPERATURE STEAM AND FORMALDEHYDE STERILIZERS - REQUIREMENTS AND TESTING
KTA 3505 : 2015(R2017)	TYPE TESTING OF MEASURING SENSORS AND TRANSDUCERS OF THE INSTRUMENTATION AND CONTROL SYSTEM IMPORTANT TO SAFETY
I.S. EN 1010-1:2005	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 1: COMMON REQUIREMENTS
DIN EN 14180:2003-10	STERILIZERS FOR MEDICAL PURPOSES - LOW TEMPERATURE STEAM AND FORMALDEHYDE STERILIZERS - REQUIREMENTS AND TESTING
I.S. EN 81-1:1999	SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PART 1: ELECTRIC LIFTS
DIN EN 13463-6:2005-07	NON-ELECTRICAL EQUIPMENT FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES - PART 6: PROTECTION BY CONTROL OF IGNITION SOURCE 'B'
ANSI B11 TR4 : 2004	SELECTION OF PROGRAMMABLE ELECTRONIC SYSTEMS (PES/PLC) FOR MACHINE TOOLS
I.S. EN 81-2:1999	SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PART 2: HYDRAULIC LIFTS
I.S. EN 415-7:2006	SAFETY OF PACKAGING MACHINES - PART 7: GROUP AND SECONDARY PACKAGING MACHINES
ANSI B11 TR6 : 2010	MACHINES - SAFETY CONTROL SYSTEM FOR MACHINE TOOLS
PD 5304:2000	SAFE USE OF MACHINERY
EEMUA 208 : 2010	GUIDE TO LIFE-CYCLE MANAGEMENT OF PRESSURE RELIEF SYSTEMS
04/30105027 DC : DRAFT JUNE 2004	ISO 21789 - GAS TURBINES - SAFETY
17/30327241 DC : 0	BS EN 61500 ED.2 - NUCLEAR POWER PLANTS - INSTRUMENTATION AND CONTROL IMPORTANT TO SAFETY - DATA COMMUNICATION IN SYSTEMS PERFORMING CATEGORY A FUNCTIONS
BS EN 61869-6:2016	INSTRUMENT TRANSFORMERS - PART 6: ADDITIONAL GENERAL REQUIREMENTS FOR LOW-POWER INSTRUMENT TRANSFORMERS
09/30176792 DC : 0	BS EN 61513 - NUCLEAR POWER PLANTS - INSTRUMENTATION AND CONTROL IMPORTANT TO SAFETY - GENERAL REQUIREMENTS FOR SYSTEMS
CEI EN 61508-4 : 2011	FUNCTIONAL SAFETY OF ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY RELATEDSYSTEMS - PART 4: DEFINITIONS AND ABBREVIATIONS
BS EN 61513:2013	Nuclear power plants. Instrumentation and control important to safety. General requirements for systems
DEFSTAN 00-42(PT3)/3(2008) : 2008	RELIABILITY AND MAINTAINABILITY (R&M) ASSURANCE GUIDE - PART 3: R&M CASE
UNI EN 415-8 : 2008	SAFETY OF PACKAGING MACHINES - PART 8: STRAPPING MACHINES
12/30268377 DC : 0	BS EN 50156-2 - ELECTRICAL EQUIPMENT FOR FURNACES AND ANCILLARY EQUIPMENT - PART 2: REQUIREMENTS FOR DESIGN, DEVELOPMENT AND TYPE APPROVAL OF SAFETY DEVICES AND SUBSYSTEMS
BS IEC 62671:2013	Nuclear power plants. Instrumentation and control important to safety. Selection and use of industrial digital devices of limited functionality
16/30331802 DC : 0	BS EN 62887 ED 1.0 - NUCLEAR POWER PLANTS - INSTRUMENTATION SYSTEMS IMPORTANT TO SAFETY - PRESSURE TRANSMITTERS: CHARACTERISTICS AND TEST METHODS
DIN EN ISO 80079-37:2016-12	Explosive atmospheres - Part 37: Non-electrical equipment for explosive atmospheres - Non-electrical type of protection constructional safety "c", control of ignition sources "b", liquid immersion "k" (ISO 80079-37:2016)
NF EN 62061 : 2005 AMD 2 2015	SAFETY OF MACHINERY - FUNCTIONAL SAFETY OF ELECTRICAL, ELECTRONIC AND PROGRAMMABLE ELECTRONIC CONTROL SYSTEMS
BS IEC 62765-1 : 2015	NUCLEAR POWERS PLANTS - INSTRUMENTATION AND CONTROL IMPORTANT TO SAFETY - MANAGEMENT OF AGEING OF SENSORS AND TRANSMITTERS - PART 1: PRESSURE TRANSMITTERS
NF EN 15333-1 : 2011	RESPIRATORY EQUIPMENT - OPEN-CIRCUIT UMBILICAL SUPPLIED COMPRESSED GAS DIVING APPARATUS - PART 1: DEMAND APPARATUS
BS EN 50491-4-1:2012	GENERAL REQUIREMENTS FOR HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) AND BUILDING AUTOMATION AND CONTROL SYSTEMS (BACS) - PART 4-1: GENERAL FUNCTIONAL SAFETY REQUIREMENTS FOR PRODUCTS INTENDED TO BE INTEGRATED IN BUILDING ELECTRONIC SYSTEMS (HBES) AND BUILDING AUTOMATION AND CONTROL SYSTEMS (BACS)
BS IEC 61831:1999	ON-LINE ANALYSER SYSTEMS - GUIDE TO DESIGN AND INSTALLATION
I.S. EN 81-22:2014	SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 22: ELECTRIC LIFTS WITH INCLINED PATH
15/30298379 DC : 0	BS EN 60965 ED 3.0 - NUCLEAR POWER PLANTS - CONTROL ROOMS - SUPPLEMENTARY CONTROL ROOM FOR REACTOR SHUTDOWN WITHOUT ACCESS TO THE MAIN CONTROL ROOM
PREN 50156-2 : DRAFT 2012	ELECTRICAL EQUIPMENT FOR FURNACES AND ANCILLARY EQUIPMENT - PART 2: REQUIREMENTS FOR DESIGN, DEVELOPMENT AND TYPE APPROVAL OF SAFETY DEVICES AND SUBSYSTEMS
17/30309594 DC : 0	BS IEC 62138 - NUCLEAR POWER PLANTS - INSTRUMENTATION AND CONTROL SYSTEMS IMPORTANT TO SAFETY - SOFTWARE ASPECTS FOR COMPUTER-BASED SYSTEMS PERFORMING CATEGORY B OR C FUNCTIONS
07/30146249 DC : 0	BS ISO 22201 - LIFTS (ELEVATORS) - DESIGN AND DEVELOPMENT OF PROGRAMMABLE ELECTRONIC SYSTEM IN SAFETY RELATED APPLICATION FOR LIFTS (PESSRAL)
DD IEC/TS 61000-1-2:2001	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 1-2: GENERAL - METHODOLOGY FOR THE ACHIEVEMENT OF FUNCTIONAL SAFETY OF ELECTRICAL AND ELECTRONIC SYSTEMS INCLUDING EQUIPMENT WITH REGARD TO ELECTROMAGNETIC PHENOMENA
BS EN 415-8:2008	Safety of packaging machines Strapping machines
UNI EN 81-50 : 2014	SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - EXAMINATIONS AND TESTS - PART 50: DESIGN RULES, CALCULATIONS, EXAMINATIONS AND TESTS OF LIFT COMPONENTS
CEI EN 61500 : 2012	NUCLEAR POWER PLANTS - INSTRUMENTATION AND CONTROL IMPORTANT TO SAFETY - DATA COMMUNICATION IN SYSTEMS PERFORMING CATEGORY A FUNCTIONS
EN 62765-1:2017	Nuclear powers plants - Instrumentation and control important to safety - Management of ageing of sensors and transmitters - Part 1: Pressure transmitters
NF EN 50495 : 2010	SAFETY DEVICES REQUIRED FOR THE SAFE FUNCTIONING OF EQUIPMENT WITH RESPECT TO EXPLOSION RISKS
08/30193511 DC : DRAFT NOV 2008	BS EN 61508-4 - FUNCTIONAL SAFETY OF ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY-RELATED SYSTEMS - PART 4: DEFINITIONS AND ABBREVIATIONS
07/30169528 DC : 0	BS EN 15333-2 - RESPIRATORY EQUIPMENT - OPEN-CIRCUIT UMBILICAL SUPPLIED COMPRESSED GAS DIVING APPARATUS - PART 2: FREE FLOW APPARATUS
UNE-EN 62304:2007	Medical device software - Software life-cycle processes (IEC 62304:2006)
13/30260728 DC : 0	BS EN 50402 - ELECTRICAL APPARATUS FOR THE DETECTION AND MEASUREMENT OF COMBUSTIBLE OR TOXIC GASES OR VAPOURS OR OF OXYGEN - REQUIREMENTS ON THE FUNCTIONAL SAFETY OF FIXED GAS DETECTION SYSTEMS
BS IEC/IEEE 62582-5:2015	Nuclear power plants. Instrumentation and control important to safety. Electrical equipment condition monitoring methods Optical time domain reflectometry
11/30214874 DC : 0	BS ISO 22201-2 - LIFTS (ELEVATORS), ESCALATORS AND MOVING WALKS - PROGRAMMABLE ELECTRONIC SYSTEMS IN SAFETY RELATED APPLICATIONS - PART 2: ESCALATORS AND MOVING WALKS (PESSRAE)
05/30133333 DC : DRAFT MAY 2005	EN 860 - SAFETY OF WOODWORKING MACHINES - ONE SIDE THICKNESS PLANING MACHINES
PD CEN/TR 15281:2006	Guidance on inerting for the prevention of explosions
BS EN 1012-3:2013	Compressors and vacuum pumps. Safety requirements Process compressors
BS EN 60601-1-4:1997	Medical electrical equipment. General requirements for safety Collateral standard. General requirements for programmable electrical medical systems
BS IEC 61508-1 : 1998 AMD 13779	FUNCTIONAL SAFETY OF ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY-RELATED SYSTEMS - GENERAL REQUIREMENTS
08/30193478 DC : DRAFT NOV 2008	BS EN 61508-7 - FUNCTIONAL SAFETY OF ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY-RELATED SYSTEMS - PART 7: OVERVIEW OF TECHNIQUES AND MEASURES
04/30115151 DC : DRAFT JUNE 2004	ISO/IEC 16085 - SOFTWARE ENGINEERING - SOFTWARE LIFE CYCLE PROCESSES - RISK MANAGEMENT
04/301784 DC : DRAFT JAN 2004	EN 848-2 - SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 2: SINGLE SPINDLE HANDFED/INTEGRATED FED ROUNTING MACHINES
UNI EN 15333-1 : 2008	RESPIRATORY EQUIPMENT - OPEN-CIRCUIT UMBILICAL SUPPLIED COMPRESSED GAS DIVING APPARATUS - PART 1: DEMAND APPARATUS
09/30193520 DC : 0	BS EN 60947-5-3 - LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-3: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - REQUIREMENTS FOR PROXIMITY DEVICES WITH DEFINED BEHAVIOUR UNDER FAULT CONDITIONS (PDF)
DIN EN 415-10:2014-07	SAFETY OF PACKAGING MACHINES - PART 10: GENERAL REQUIREMENTS
CSA ISO/IEC 16085 : 2007 : R2017	SYSTEMS AND SOFTWARE ENGINEERING - LIFE CYCLE PROCESSES - RISK MANAGEMENT
FD CEN/TR 15281 : 2006 FD	GUIDANCE ON INERTING FOR THE PREVENTION OF EXPLOSIONS
CSA C60044-8 :2007	INSTRUMENT TRANSFORMERS - PART 8: ELECTRONIC CURRENT TRANSFORMERS
CEI CLC/TR 62685 : 2012	INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - ASSESSMENT GUIDELINE FOR SAFETY DEVICES USING IEC 61784-3 FUNCTIONAL SAFETY COMMUNICATION PROFILES (FSCPS)
AAMI IEC 62304 : 2006	MEDICAL DEVICE SOFTWARE - SOFTWARE LIFE CYCLE PROCESSES
NF EN 50402 : 2017	ELECTRICAL APPARATUS FOR THE DETECTION AND MEASUREMENT OF COMBUSTIBLE OR TOXIC GASES OR VAPOURS OR OF OXYGEN - REQUIREMENTS ON THE FUNCTIONAL SAFETY OF GAS DETECTION SYSTEMS
NF EN 61557-15 : 2014	ELECTRICAL SAFETY IN LOW VOLTAGE DISTRIBUTION SYSTEMS UP TO 1000 V A.C. AND 1500 V D.C. - EQUIPMENT FOR TESTING, MEASURING OR MONITORING OF PROTECTIVE MEASURES - PART 15: FUNCTIONAL SAFETY REQUIREMENTS FOR INSULATION MONITORING DEVICES IN IT SYSTEMS AND EQUIPMENT FOR INSULATION FAULT LOCATION IN IT SYSTEMS
OLF 070 : 2004
BS EN 60335-1 : 2012	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60335-1:2010, MODIFIED)
I.S. EN 15333-1:2008	RESPIRATORY EQUIPMENT - OPEN-CIRCUIT UMBILICAL SUPPLIED COMPRESSED GAS DIVING APPARATUS - PART 1: DEMAND APPARATUS
I.S. EN 60947-5-3:2013	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-3: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - REQUIREMENTS FOR PROXIMITY DEVICES WITH DEFINED BEHAVIOUR UNDER FAULT CONDITIONS (PDDB)
I.S. EN 62808:2016	NUCLEAR POWER PLANTS - INSTRUMENTATION AND CONTROL SYSTEMS IMPORTANT TO SAFETY - DESIGN AND QUALIFICATION OF ISOLATION DEVICES
I.S. EN 61511-2:2017	FUNCTIONAL SAFETY - SAFETY INSTRUMENTED SYSTEMS FOR THE PROCESS INDUSTRY SECTOR - PART 2: GUIDELINES FOR THE APPLICATION OF IEC 61511-1
NF EN 61800-5-2 : 2017	ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 5-2: SAFETY REQUIREMENTS - FUNCTIONAL
UNI EN 415-10 : 2014	SAFETY OF PACKAGING MACHINES - PART 10: GENERAL REQUIREMENTS
I.S. EN 81-50:2014	SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - EXAMINATIONS AND TESTS - PART 50: DESIGN RULES, CALCULATIONS, EXAMINATIONS AND TESTS OF LIFT COMPONENTS
ASCE 21 05 : 2006	AUTOMATED PEOPLE MOVER STANDARDS - PART 1
I.S. EN 61513:2013	NUCLEAR POWER PLANTS - INSTRUMENTATION AND CONTROL IMPORTANT TO SAFETY - GENERAL REQUIREMENTS FOR SYSTEMS (IEC 61513:2011 (EQV))
I.S. EN 61784-3-3:2017	INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 3-3: FUNCTIONAL SAFETY FIELDBUSES - ADDITIONAL SPECIFICATIONS FOR CPF 3
I.S. EN 61508-6:2010	FUNCTIONAL SAFETY OF ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY-RELATED SYSTEMS - PART 6: GUIDELINES ON THE APPLICATION OF IEC 61508-2 AND IEC 61508-3
I.S. EN ISO 20815:2010	PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - PRODUCTION ASSURANCE AND RELIABILITY MANAGEMENT
I.S. EN 50348:2010	STATIONARY ELECTROSTATIC APPLICATION EQUIPMENT FOR NON-IGNITABLE LIQUID COATING MATERIAL - SAFETY REQUIREMENTS
CEN ISO/TR 12489:2016	Petroleum, petrochemical and natural gas industries - Reliability modelling and calculation of safety systems (ISO/TR 12489:2013)
I.S. EN 81-40:2008	SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - SPECIAL LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 40: STAIRLIFTS AND INCLINED LIFTING PLATFORMS INTENDED FOR PERSONS WITH IMPAIRED MOBILITY
CEN/TR 15640:2007	Health informatics - Measures for ensuring the patient safety of health software
ISO/TR 8100-24:2016	Safety requirements for lifts (elevators) Part 24: Convergence of lift requirements
CEI EN 61508-2 : 2011	FUNCTIONAL SAFETY OF ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY-RELATED SYSTEMS - PART 2: REQUIREMENTS FOR ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY-RELATED SYSTEMS
EN 81-22:2014	Safety rules for the construction and installation of lifts - Lifts for the transport of persons and goods - Part 22: Electric lifts with inclined path
ISO 22201-2:2013	Lifts (elevators), escalators and moving walks Programmable electronic systems in safety related applications Part 2: Escalators and moving walks (PESSRAE)
EN ISO/IEC 80079-38:2016	Explosive atmospheres - Part 38: Equipment and components in explosive atmospheres in underground mines (ISO/IEC 80079-38:2016)
IEC TS 61000-1-2:2008	Electromagnetic compatibility (EMC) - Part 1-2: General - Methodology for the achievement of functional safety of electrical and electronic systems including equipment with regard to electromagnetic phenomena
ISO/IEC 16085:2006	Systems and software engineering Life cycle processes Risk management
IEC 62061:2005+AMD1:2012+AMD2:2015 CSV	Safety of machinery - Functional safety of safety-related electrical, electronic and programmable electronic control systems
IEC TR 62685:2010	Industrial communication networks - Profiles - Assessment guideline for safety devices using IEC 61784-3 functional safety communication profiles (FSCPs)
IEC 62138:2004	Nuclear power plants - Instrumentation and control important for safety - Software aspects for computer-based systems performing category B or C functions
I.S. EN 62304:2006	MEDICAL DEVICE SOFTWARE - SOFTWARE LIFE-CYCLE PROCESSES
UNI EN 81-20 : 2014	SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 20: PASSENGER AND GOODS PASSENGER LIFTS
DIN EN 746-2:2011-02	Industrial thermoprocessing equipment - Part 2: Safety requirements for combustion and fuel handling systems
DIN EN 14143:2013-10	RESPIRATORY EQUIPMENT - SELF-CONTAINED RE-BREATHING DIVING APPARATUS
DIN EN 12952-11 E : 2007	WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 11: REQUIREMENTS FOR LIMITING DEVICES OF THE BOILER AND ACCESSORIES
IEC 60947-5-3:2013	Low-voltage switchgear and controlgear - Part 5-3: Control circuit devices and switching elements - Requirements for proximity devices with defined behaviour under fault conditions (PDDB)
BS EN 1010-1 : 2004	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 1: COMMON REQUIREMENTS
IEC 60044-8:2002	Instrument transformers - Part 8: Electronic current transformers
DIN EN 15233 E : 2007	METHODOLOGY FOR FUNCTIONAL SAFETY ASSESSMENT OF PROTECTIVE SYSTEMS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES
BS EN 81-22:2014	SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 22: ELECTRIC LIFTS WITH INCLINED PATH
DIN EN 12952-11:2007-09	WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 11: REQUIREMENTS FOR LIMITING DEVICES OF THE BOILER AND ACCESSORIES
UNE-EN 81-22:2014	Safety rules for the construction and installation of lifts - Lifts for the transport of persons and goods - Part 22: Electric lifts with inclined path
ISO 14224:2016	Petroleum, petrochemical and natural gas industries Collection and exchange of reliability and maintenance data for equipment
UNE-EN 81-2:2001	SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PART 2: HYDRAULIC LIFTS.
UNE-EN 60730-1:2013	Automatic electrical controls for household and similar use - Part 1: General requirements
CSA N290.14 : 2015	QUALIFICATION OF DIGITAL HARDWARE AND SOFTWARE FOR USE IN INSTRUMENTATION AND CONTROL APPLICATIONS FOR NUCLEAR POWER PLANTS
EEMUA 222 : 2009	GUIDE TO THE APPLICATION OF IEC 61511 TO SAFETY INSTRUMENTED SYSTEMS IN THE UK PROCESS INDUSTRIES
EN 81-40:2008	Safety rules for the construction and installation of lifts - Special lifts for the transport of persons and goods - Part 40: Stairlifts and inclined lifting platforms intended for persons with impaired mobility
UNI EN 1010-1 : 2011	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 1: COMMON REQUIREMENTS
UNI EN 12952-11 : 2007	WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 11: REQUIREMENTS FOR LIMITING DEVICES OF THE BOILER AND ACCESSORIES
UNI EN 14143 : 2013	RESPIRATORY EQUIPMENT - SELF-CONTAINED RE-BREATHING DIVING APPARATUS
UNI EN 1012-3 : 2014	COMPRESSORS AND VACUUM PUMPS - SAFETY REQUIREMENTS - PART 3: PROCESS COMPRESSORS
UNI EN 81-2 : 2010	SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PART 2: HYDRAULIC LIFTS
UNI EN 81-1 : 2010	SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PART 1: ELECTRIC LIFTS
IEC 61513:2011	Nuclear power plants - Instrumentation and control important to safety - General requirements for systems
UNI EN 1870-1 : 2009	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 1: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE), DIMENSION SAWS AND BUILDING SITE SAWS
UNI EN 746-2 : 2011	INDUSTRIAL THERMOPROCESSING EQUIPMENT - PART 2: SAFETY REQUIREMENTS FOR COMBUSTION AND FUEL HANDLING SYSTEMS
UNI EN 14180 : 2014	STERILIZERS FOR MEDICAL PURPOSES - LOW TEMPERATURE STEAM AND FORMALDEHYDE STERILIZERS - REQUIREMENTS AND TESTING
UNI EN 415-7 : 2008	SAFETY OF PACKAGING MACHINES - PART 7: GROUP AND SECONDARY PACKAGING MACHINES
UNE-EN 50223:2016	Stationary electrostatic application equipment for ignitable flock material - Safety requirements
DIN EN ISO/IEC 80079-38 E : 2017	EXPLOSIVE ATMOSPHERES - PART 38: EQUIPMENT AND COMPONENTS IN EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES (ISO/IEC 80079-38:2016)
11/30251717 DC : 0	BS EN 81-20 - SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 20: PASSENGER AND GOODS PASSENGER LIFTS
I.S. EN 50270:2015	ELECTROMAGNETIC COMPATIBILITY - ELECTRICAL APPARATUS FOR THE DETECTION AND MEASUREMENT OF COMBUSTIBLE GASES, TOXIC GASES OR OXYGEN
06/30109242 DC : DRAFT SEP 2006	ISO 20815 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - PRODUCTION ASSURANCE AND RELIABILITY MANAGEMENT
17/30356609 DC : 0	BS ISO 8100-2 - LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 2: DESIGN RULES, CALCULATIONS, EXAMINATIONS AND TESTS OF LIFT COMPONENTS
09/30179103 DC : 0	BS ISO 26262-6 - ROAD VEHICLES - FUNCTIONAL SAFETY - PART 6: PRODUCT DEVELOPMENT: SOFTWARE LEVEL
PREN 17180 : DRAFT 2017	STERILIZERS FOR MEDICAL PURPOSES - LOW TEMPERATURE VAPORIZED HYDROGEN PEROXIDE STERILIZERS - REQUIREMENTS AND TESTING
BS IEC 61511-1 : 2003 AMD 15776	FUNCTIONAL SAFETY - SAFETY INSTRUMENTED SYSTEMS FOR THE PROCESS INDUSTRY SECTOR - PART 1: FRAMEWORK, DEFINITIONS, SYSTEM, HARDWARE AND SOFTWARE REQUIREMENTS
CEI EN 60044-8 : 2004	INSTRUMENT TRANSFORMERS - PART 8: ELECTRONIC CURRENT TRASFORMERS
BS EN 60965:2016 (published 2016-09)	Nuclear power plants. Control rooms. Supplementary control room for reactor shutdown without access to the main control room
BS EN 61508-2:2010	Functional safety of electrical/electronic/ programmable electronic safety-related systems Requirements for electrical/electronic/ programmable electronic safety-related systems
BS EN 61000-1-2:2016	Electromagnetic compatibility (EMC) General. Methodology for the achievement of functional safety of electrical and electronic systems including equipment with regard to electromagnetic phenomena
BS EN 61508-7:2010	Functional safety of electrical/electronic/ programmable electronic safety related systems Overview of techniques and measures
11/30251566 DC : 0	BS EN 62628 - GUIDANCE ON SOFTWARE ASPECTS OF DEPENDABILITY
CEI EN 62138 : 2011	NUCLEAR POWER PLANTS - INSTRUMENTATION AND CONTROL IMPORTANT FOR SAFETY - SOFTWARE ASPECTS FOR COMPUTER-BASED SYSTEMS PERFORMING CATEGORY B OR C FUNCTIONS
BS PD ISO/TR 12489 : 2013	PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - RELIABILITY MODELLING AND CALCULATION OF SAFETY SYSTEMS
UNI ISO 15998 : 2008	EARTH-MOVING MACHINERY - MACHINE-CONTROL SYSTEMS (MCS) USING ELECTRONIC COMPONENTS - PERFORMANCE CRITERIA AND TESTS FOR FUNCTIONAL SAFETY
BS 5724-1.4(1997) : 1997	MEDICAL ELECTRICAL EQUIPMENT - PART 1-4: GENERAL REQUIREMENTS FOR SAFETY - COLLATERAL STANDARD - GENERAL REQUIREMENTS FOR PROGRAMMABLE ELECTRICAL MEDICAL SYSTEMS
API 554-1 : 2008(R2016)	PROCESS CONTROL SYSTEMS - PART 1: PROCESS CONTROL SYSTEMS FUNCTIONS AND FUNCTIONAL SPECIFICATION DEVELOPMENT
13/30267601 DC : 0	BS EN 61869-6 - INSTRUMENTS TRANSFORMERS - PART 6: ADDITIONAL GENERAL REQUIREMENTS FOR LOW POWER INSTRUMENT TRANSFORMERS
PD ISO/TR 8100-24:2016	Safety requirements for lifts (elevators) Convergence of lift requirements
07/30166811 DC : 0	BS EN ISO 23125 - SAFETY OF MACHINE TOOLS - TURNING MACHINES
I.S. EN 12478:2000	SAFETY OF MACHINE TOOLS - LARGE NUMERICALLY CONTROLLED TURNING MACHINES AND TURNING CENTRES
PD CEN/TR 15640:2007	HEALTH INFORMATICS - MEASURES FOR ENSURING THE PATIENT SAFETY OF HEALTH SOFTWARE
12/30268625 DC : 0	BS IEC/PAS 62814/ED1 - DEPENDABILITY OF SOFTWARE PRODUCTS CONTAINING REUSABLE COMPONENTS - GUIDANCE FOR FUNCTIONALITY AND TESTS
11/30229935 DC : 0	BS EN 62671 - NUCLEAR POWER PLANTS - INSTRUMENTATION AND CONTROL IMPORTANT TO SAFETY - SELECTION AND USE OF INDUSTRIAL DIGITAL DEVICES OF LIMITED FUNCTIONALITY
BS ISO 17894:2005	SHIPS AND MARINE TECHNOLOGY - COMPUTER APPLICATIONS - GENERAL PRINCIPLES FOR THE DEVELOPMENT AND USE OF PROGRAMMABLE ELECTRONIC SYSTEMS IN MARINE APPLICATIONS
BS IEC 61508-5 : 98 AMD 13783	FUNCTIONAL SAFETY OF ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY-RELATED SYSTEMS - EXAMPLES OF METHODS FOR THE DETERMINATION OF SAFETY INTEGRITY LEVELS
03/313421 DC : DRAFT NOV 2003	IEC 60079-28 - ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - PART 28: RISK OF IGNITION BY RADIATION OF EXPLOSIVE ATMOSPHERES OF GAS, VAPOUR OR MIST FROM OPTICAL RADIATION EQUIPMENT AND TRANSMISSION SYSTEMS
12/30247700 DC : 0	BS EN 60079-29-3 IEC 60079-29-3 ED. 1.0 - EXPLOSIVE ATMOSPHERES - PART 29-3: GAS DETECTORS GUIDANCE ON FUNCTIONAL SAFETY OF FIXED GAS DETECTION SYSTEMS
12/30257022 DC : 0	BS EN 13611 - SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS OR LIQUID FUELS - GENERAL REQUIREMENTS
PD IEC/TR 63084:2017	Nuclear power plants. Instrumentation and control important to safety. Platform qualification for systems important to safety
ISA 84.00.01-1 : 2004	FUNCTIONAL SAFETY: SAFETY INSTRUMENTED SYSTEMS FOR THE PROCESS INDUSTRY SECTOR - PART 1: FRAMEWORK, DEFINITIONS, SYSTEM, HARDWARE AND SOFTWARE REQUIREMENTS
BS EN 415-10:2014	SAFETY OF PACKAGING MACHINES - PART 10: GENERAL REQUIREMENTS
CEI EN 61513 : 2013	NUCLEAR POWER PLANTS - INSTRUMENTATION AND CONTROL IMPORTANT TO SAFETY - GENERAL REQUIREMENT FOR SYSTEMS
NF EN 13611 : 2016	SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
BS IEC 61226 : 2009	NUCLEAR POWER PLANTS - INSTRUMENTATION AND CONTROL IMPORTANT TO SAFETY - CLASSIFICATION OF INSTRUMENTATION AND CONTROL FUNCTIONS
08/30193474 DC : DRAFT NOV 2008	BS EN 61508-5 - FUNCTIONAL SAFETY OF ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY-RELATED SYSTEMS - PART 5: EXAMPLES OF METHODS FOR THE DETERMINATION OF SAFETY INTEGRITY LEVELS
EN 62619:2017	Secondary cells and batteries containing alkaline or other non-acid electrolytes - Safety requirements for secondary lithium cells and batteries, for use in industrial applications
BS EN 50495:2010	Safety devices required for the safe functioning of equipment with respect to explosion risks
14/30258869 DC : 0	BS IEC 62765-1 ED 1.0 - NUCLEAR POWER PLANTS - INSTRUMENTATION AND CONTROL IMPORTANT TO SAFETY - MANAGEMENT OF AGEING OF SENSORS AND TRANSMITTERS - PART 1: PRESSURE TRANSMITTERS
PD ISO/IEC TR 24772:2013	INFORMATION TECHNOLOGY - PROGRAMMING LANGUAGES - GUIDANCE TO AVOIDING VULNERABILITIES IN PROGRAMMING LANGUAGES THROUGH LANGUAGE SELECTION AND USE
04/30124187 DC : 0	PREN 415-8 - SAFETY OF PACKAGING MACHINES - PART 8: STRAPPING MACHINES
02/645215 DC : DRAFT OCT 2002	EN 50090-2-3:2002 - HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) - PART 2-3: SYSTEM OVERVIEW - GENERAL FUNCTIONAL SAFETY REQUIREMENTS FOR PRODUCTS INTENDED TO BE INTEGRATED IN HBES
BS EN 62628:2012	GUIDANCE ON SOFTWARE ASPECTS OF DEPENDABILITY
BS ISO 22201:2009	LIFTS (ELEVATORS) - DESIGN AND DEVELOPMENT OF PROGRAMMABLE ELECTRONIC SYSTEMS IN SAFETY-RELATED APPLICATIONS FOR LIFTS (PESSRAL)
BS EN 50348:2010	Stationary electrostatic application equipment for non-ignitable liquid coating material. Safety requirements
DIN EN 81-50 E : 2015	SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - EXAMINATIONS AND TESTS - PART 50: DESIGN RULES, CALCULATIONS, EXAMINATIONS AND TESTS OF LIFT COMPONENTS
ISO 22201:2009	Lifts (elevators) Design and development of programmable electronic systems in safety-related applications for lifts (PESSRAL)
BS EN 61508-4:2010	Functional safety of electrical/electronic/ programmable electronic safety related systems Definitions and abbreviations
04/30086349 DC : DRAFT APR 2004	EN ISO 13849-1 - SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 1: GENERAL PRINCIPLES FOR DESIGN
NF EN 61511-1 : 2017	FUNCTIONAL SAFETY - SAFETY INSTRUMENTED SYSTEMS FOR THE PROCESS INDUSTRY SECTOR - PART 1: FRAMEWORK, DEFINITIONS, SYSTEM, HARDWARE AND APPLICATION PROGRAMMING REQUIREMENTS
DD CEN/TS 15260:2006	HEALTH INFORMATICS - CLASSIFICATION OF SAFETY RISKS FROM HEALTH INFORMATICS PRODUCTS
AAMI TIR32 :2004	MEDICAL DEVICE SOFTWARE RISK MANAGEMENT
API 554-3 : 2008 : R2016	PROCESS CONTROL SYSTEMS - PROJECT EXECUTION AND PROCESS CONTROL SYSTEM OWNERSHIP
CEI EN 61800-5-2 : 2009	ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 5-2: SAFETY REQUIREMENTS - FUNCTIONAL
I.S. CEN TS 15260:2006	HEALTH INFORMATICS - CLASSIFICATION OF SAFETY RISKS FROM HEALTH INFORMATICS PRODUCTS
CSA C22.2 No. 60601.1.4 : 2002	MEDICAL ELECTRICAL EQUIPMENT - PART 1-4: GENERAL REQUIREMENTS FOR SAFETY - COLLATERAL STANDARD: PROGRAMMABLE ELECTRICAL MEDICAL SYSTEMS
EEMUA 191 : 2013	ALARM SYSTEMS - GUIDE TO DESIGN, MANAGEMENT AND PROCUREMENT
API 17O : 2014	SUBSEA HIGH INTEGRITY PRESSURE PROTECTION SYSTEMS (HIPPS)
API 554-2 : 2008 : R2016	PROCESS CONTROL SYSTEMS - PROCESS CONTROL SYSTEM DESIGN
ASCE T&DI 21 13 : 2013	AUTOMATED PEOPLE MOVER STANDARDS
I.S. EN 61508-1:2010	FUNCTIONAL SAFETY OF ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY-RELATED SYSTEMS - PART 1: GENERAL REQUIREMENTS
IEEE/ISO/IEC 16085-2006	SYSTEMS AND SOFTWARE ENGINEERING - LIFE CYCLE PROCESSES - RISK MANAGEMENT
ISO/IEC 14762:2009	Information technology Functional safety requirements for Home and Building Electronic Systems (HBES)
I.S. EN 61226:2010	NUCLEAR POWER PLANTS - INSTRUMENTATION AND CONTROL IMPORTANT TO SAFETY - CLASSIFICATION OF INSTRUMENTATION AND CONTROL FUNCTIONS
BS EN 50271:2010	Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen. Requirements and tests for apparatus using software and/or digital technologies
I.S. EN ISO/IEC 80079-38:2016	EXPLOSIVE ATMOSPHERES - PART 38: EQUIPMENT AND COMPONENTS IN EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES (ISO/IEC/DIS 80079-38:2012)
ISO/IEC 80079-38:2016	Explosive atmospheres Part 38: Equipment and components in explosive atmospheres in underground mines
CSA CEI/IEC 62304:14 (R2019)	Medical device software - Software life cycle processes (Adopted CEI/IEC 62304:2006, first edition, 2006-05) \| Logiciels de dispositifs médicaux - Processus du cycle de vie du logiciel (norme CEI/IEC 62304:2006 adoptée, première édition, 2006-05)
UNE-EN ISO 80079-37:2018	Explosive atmospheres - Part 37: Non-electrical equipment for explosive atmospheres - Non-electrical type of protection constructional safety 'c', control of ignition sources 'b', liquid immersion 'k' (ISO 80079-37:2016)
DIN EN 13611:2016-09	SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
BS EN 62808:2016	NUCLEAR POWER PLANTS - INSTRUMENTATION AND CONTROL SYSTEMS IMPORTANT TO SAFETY - DESIGN AND QUALIFICATION OF ISOLATION DEVICES (IEC 62808:2015)
BS EN 61500:2011	Nuclear power plants. Instrumentation and control important to safety. Data communication in systems performing category A functions
PREN 13611 : DRAFT 2017	SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
IEC 60532:2010	Radiation protection instrumentation - Installed dose rate meters, warning assemblies and monitors - X and gamma radiation of energy between 50 keV and 7 MeV
I.S. EN 50271:2010	ELECTRICAL APPARATUS FOR THE DETECTION AND MEASUREMENT OF COMBUSTIBLE GASES, TOXIC GASES OR OXYGEN - REQUIREMENTS AND TESTS FOR APPARATUS USING SOFTWARE AND/OR DIGITAL TECHNOLOGIES
EN ISO 20815:2010	Petroleum, petrochemical and natural gas industries - Production assurance and reliability management (ISO 20815:2008, Corrected version 2009-06-15)
I.S. EN 60730-1:2016	AUTOMATIC ELECTRICAL CONTROLS - PART 1: GENERAL REQUIREMENTS
IEC 61511-2:2016	Functional safety - Safety instrumented systems for the process industry sector - Part 2: Guidelines for the application of IEC 61511-1:2016
IEC 61511-2 REDLINE : 2ED 2016	FUNCTIONAL SAFETY - SAFETY INSTRUMENTED SYSTEMS FOR THE PROCESS INDUSTRY SECTOR - PART 2: GUIDELINES FOR THE APPLICATION OF IEC 61511-1: 2016
I.S. EN 50402:2017	ELECTRICAL APPARATUS FOR THE DETECTION AND MEASUREMENT OF COMBUSTIBLE OR TOXIC GASES OR VAPOURS OR OF OXYGEN - REQUIREMENTS ON THE FUNCTIONAL SAFETY OF FIXED GAS DETECTION SYSTEMS
IEC 62855:2016	Nuclear power plants - Electrical power systems - Electrical power systems analysis
ISO 15998:2008	Earth-moving machinery Machine-control systems (MCS) using electronic components Performance criteria and tests for functional safety
ASME A17.1-2016/CSA B44-16	Safety code for elevators and escalators (Bi-national standard, with ASME A17.1)
IEC 61800-5-2:2016 RLV	Adjustable speed electrical power drive systems - Part 5-2: Safety requirements - Functional
DIN EN 14180:2014-09	STERILIZERS FOR MEDICAL PURPOSES - LOW TEMPERATURE STEAM AND FORMALDEHYDE STERILIZERS - REQUIREMENTS AND TESTING
DIN EN 1870-1:2009-08	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 1: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE), DIMENSION SAWS AND BUILDING SITE SAWS
10/30216944 DC : 0	BS EN 81-22 - SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - LIFTS FOR TRANSPORT OF PERSONS AND GOODS - PART 22: ELECTRIC LIFTS WITH INCLINED PATH
14/30302919 DC : 0	PD CEN/TR 81-12 - SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - BASICS AND INTERPRETATIONS - PART 12: USE OF EN 81-20 AND EN 81-50 IN SPECIFIC MARKETS
12/30228018 DC : 0	BS EN 61557-15 - ELECTRICAL SAFETY IN LOW VOLTAGE DISTRIBUTION SYSTEMS UP TO 1000 V A.C. AND 1500 V D.C. - EQUIPMENT FOR TESTING, MEASURING OR MONITORING OF PROTECTIVE MEASURES - PART 15: FUNCTIONAL SAFETY REQUIREMENTS FOR INSULATION MONITORING DEVICES AND FOR EQUIPMENT FOR INSULATION FAULT LOCATION IN IT SYSTEMS
BS EN 1870-1 : 2007	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 1: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE), DIMENSION SAWS AND BUILDING SITE SAWS
BS EN 81-1 : 1998	SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PART 1: ELECTRIC LIFTS
IEC 61131-6:2012	Programmable controllers - Part 6: Functional safety
IEC 61508-1:2010	Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 1: General requirements (see Functional Safety and IEC 61508)
BS EN 12952-11:2007	Water-tube boilers and auxiliary installations Requirements for limiting devices of the boiler and accessories
UNE-EN 61508-6:2011	Functional safety of electrical/electronic/programmable electronic safety-related systems -- Part 6: Guidelines on the application of IEC 61508-2 and IEC 61508-3
IEC 61557-15:2014	Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 15: Functional safety requirements for insulation monitoring devices in IT systems and equipment for insulation fault location in IT systems
BS EN 12953-9:2007	Shell boilers Requirements for limiting devices of the boiler and accessories
IEC 60079-29-3:2014	Explosive atmospheres - Part 29-3: Gas detectors - Guidance on functional safety of fixed gas detection systems
BS EN 81-2 : 1998	SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PART 2: HYDRAULIC LIFTS
BS EN 415-7 : 2006	SAFETY OF PACKAGING MACHINES - PART 7: GROUP AND SECONDARY PACKAGING MACHINES
IEC 60601-1-4:1996+AMD1:1999 CSV	Medical electrical equipment - Part 1-4: General requirements for safety - Collateral Standard: Programmable electrical medical systems
IEC 62628:2012	Guidance on software aspects of dependability
IEC 61162-402:2005	Maritime navigation and radiocommunication equipment and systems - Digital interfaces - Part 402: Multiple talkers and multiple listeners - Ship systems interconnection - Documentation and test requirements
IEC 61508-4:2010	Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 4: Definitions and abbreviations (see Functional Safety and IEC 61508)
IEC 62808:2015+AMD1:2018 CSV	Nuclear power plants - Instrumentation and control systems important to safety - Design and qualification of isolation devices
BS EN 81-20:2014	Safety rules for the construction and installation of lifts. Lifts for the transport of persons and goods Passenger and goods passenger lifts
ISO 13849-1:2015	Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design
IEC 61508-2:2010	Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 2: Requirements for electrical/electronic/programmable electronic safety-related systems (see Functional Safety and IEC 61508)
ISO 80079-37:2016	Explosive atmospheres Part 37: Non-electrical equipment for explosive atmospheres Non-electrical type of protection constructional safety 'c', control of ignition sources 'b', liquid immersion 'k'
IEC TR 63084:2017	Nuclear power plants - Instrumentation and control important to safety - Platform qualification for systems important to safety
11/30233799 DC : 0	BS EN 60730-1 ED5 - AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE - PART 1: GENERAL REQUIREMENTS
BS EN 14180:2014	Sterilizers for medical purposes. Low temperature steam and formaldehyde sterilizers. Requirements and testing
BS EN 14143:2013	Respiratory equipment. Self-contained re-breathing diving apparatus
BS EN 50156-1:2015	Electrical equipment for furnaces and ancillary equipment Requirements for application design and installation
IEC 61000-1-2:2016	Electromagnetic compatibility (EMC) - Part 1-2: General - Methodology for the achievement of functional safety of electrical and electronic systems including equipment with regard to electromagnetic phenomena
IEC 61226:2009	Nuclear power plants - Instrumentation and control important to safety - Classification of instrumentation and control functions
BS EN ISO 13849-1:2015	Safety of machinery. Safety-related parts of control systems General principles for design
UNE-EN ISO 13849-1:2016	Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2015)
IEC 61508-5:2010	Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 5: Examples of methods for the determination of safety integrity levels (see Functional Safety and IEC 61508)
12/30260546 DC : 0	BS EN 50156-1 - ELECTRICAL EQUIPMENT FOR FURNACES AND ANCILLARY EQUIPMENT - PART 1: REQUIREMENTS FOR APPLICATION DESIGN AND INSTALLATION
UNE-EN 14143:2014	Respiratory equipment - Self-contained re-breathing diving apparatus
EN 61511-1:2017/A1:2017	FUNCTIONAL SAFETY - SAFETY INSTRUMENTED SYSTEMS FOR THE PROCESS INDUSTRY SECTOR - PART 1: FRAMEWORK, DEFINITIONS, SYSTEM, HARDWARE AND APPLICATION PROGRAMMING REQUIREMENTS
CEN/TR 15281:2006	Guidance on Inerting for the Prevention of Explosions
EN 61500:2011	Nuclear power plants - Instrumentation and control important to safety - Data communication in systems performing category A functions
DIN EN 81-2:2010-08	SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PART 2: HYDRAULIC LIFTS
EN 415-10:2014	Safety of packaging machines - Part 10: General Requirements
EN 415-7:2006+A1:2008	Safety of packaging machines - Part 7: Group and secondary packaging machines
EN 14143:2013	Respiratory equipment - Self-contained re-breathing diving apparatus
EN 415-8:2008	Safety of packaging machines - Part 8: Strapping machines
EN 81-2 : 1998 + A3 2009	SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PART 2: HYDRAULIC LIFTS
EN 746-2:2010	Industrial thermoprocessing equipment - Part 2: Safety requirements for combustion and fuel handling systems
EN ISO 13849-1:2015	Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2015)
EN 15233:2007	Methodology for functional safety assessment of protective systems for potentially explosive atmospheres
EN 81-1:1998+A3:2009	Safety rules for the construction and installation of lifts - Part 1: Electric lifts
EN 1870-1:2007+A1:2009	Safety of woodworking machines - Circular sawing machines - Part 1: Circular saw benches (with and without sliding table), dimension saws and building site saws
EN 14180:2014	Sterilizers for medical purposes - Low temperature steam and formaldehyde sterilizers - Requirements and testing
BS EN 61508-1:2010	Functional safety of electrical/electronic/ programmable electronic safety-related systems General requirements
08/30193508 DC : DRAFT NOV 2008	BS EN 61508-1 - FUNCTIONAL SAFETY OF ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY-RELATED SYSTEMS - PART 1: GENERAL REQUIREMENTS
12/30264224 DC : 0	BS EN 61511-1 ED.2 - FUNCTIONAL SAFETY - SAFETY INSTRUMENTED SYSTEMS FOR THE PROCESS INDUSTRY SECTOR - NORMATIVE - PART 1: FRAMEWORK, DEFINITIONS, SYSTEM, HARDWARE AND SOFTWARE REQUIREMENTS
09/30206358 DC : DRAFT SEP 2009	BS EN 1870-4 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 4: MULTI-BLADE RIP SAWING MACHINES WITH MANUAL LOADING AND/OR UNLOADING
BS IEC 62855:2016	Nuclear power plants. Electrical power systems. Electrical power systems analysis
I.S. EN 1870-1:2007	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 1: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE), DIMENSION SAWS AND BUILDING SITE SAWS
UNE-EN 60300-3-4:2011	Dependability management -- Part 3-4: Application guide - Guide to the specification of dependability requirements
NF EN 50156-2 : 2016	ELECTRICAL EQUIPMENT FOR FURNACES AND ANCILLARY EQUIPMENT - PART 2: REQUIREMENTS FOR DESIGN, DEVELOPMENT AND TYPE APPROVAL OF SAFETY DEVICES AND SUBSYSTEMS
ABS 0253 : 2016	GUIDE FOR SOFTWARE SYSTEMS VERIFICATION ABS CYBERSAFETY[TM] VOLUME 4
DIN EN 15333-1:2008-04	RESPIRATORY EQUIPMENT - OPEN-CIRCUIT UMBILICAL SUPPLIED COMPRESSED GAS DIVING APPARATUS - PART 1: DEMAND APPARATUS
S.R. CEN TR 15640:2007	HEALTH INFORMATICS - MEASURES FOR ENSURING THE PATIENT SAFETY OF HEALTH SOFTWARE
DEFSTAN 00-042(PT3)/5(2016) : 2016	RELIABILITY AND MAINTAINABILITY ASSURANCE GUIDE - PART 3: R & M CASE
CSA ISO/IEC 14762 : 2010	INFORMATION TECHNOLOGY - FUNCTIONAL SAFETY REQUIREMENTS FOR HOME AND BUILDING ELECTRONIC SYSTEMS (HBES)
BS IEC 61508-2 : 2000 AMD 13780	FUNCTIONAL SAFETY OF ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY-RELATED SYSTEMS - PART 2: REQUIREMENTS FOR ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY-RELATED SYSTEMS
14/30302089 DC : 0	BS EN 61000-1-2 ED1 - ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 1-2: GENERAL - METHODOLOGY FOR THE ACHIEVEMENT OF FUNCTIONAL SAFETY OF ELECTRICAL AND ELECTRONIC SYSTEMS INCLUDING EQUIPMENT WITH REGARD TO ELECTROMAGNETIC PHENOMENA
BS ISO 22201-2:2013	LIFTS (ELEVATORS), ESCALATORS AND MOVING WALKS - PROGRAMMABLE ELECTRONIC SYSTEMS IN SAFETY RELATED APPLICATIONS - PART 2: ESCALATORS AND MOVING WALKS (PESSRAE)
BS IEC 62138 : 2004	NUCLEAR POWER PLANTS - INSTRUMENTATION AND CONTROL IMPORTANT FOR SAFETY - SOFTWARE ASPECTS FOR COMPUTER-BASED SYSTEMS PERFORMING CATEGORY B OR C FUNCTIONS
13/30273033 DC : 0	BS EN 1012-3 - COMPRESSORS AND VACUUM PUMPS - SAFETY REQUIREMENTS - PART 3: PROCESS COMPRESSORS
12/30243459 DC : 0	BS ISO/IEC 80079-37 - EXPLOSIVE ATMOSPHERES - PART 37: NON-ELECTRICAL EQUIPMENT FOR USE IN EXPLOSIVE ATMOSPHERES - NON-ELECTRICAL TYPE OF PROTECTION CONSTRUCTIONAL SAFETY 'CH', CONTROL OF IGNITION SOURCES 'BH', LIQUID IMMERSION 'KH'
BS IEC 60532:2010	RADIATION PROTECTION INSTRUMENTATION - INSTALLED DOSE RATE METERS, WARNING ASSEMBLIES AND MONITORS - X AND GAMMA RADIATION OF ENERGY BETWEEN 50 KEV AND 7 MEV
DIN EN 415-8:2011-06	SAFETY OF PACKAGING MACHINES - PART 8: STRAPPING MACHINES
PD IEC/TS 61508-3-1:2016	FUNCTIONAL SAFETY OF ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY-RELATED SYSTEMS - PART 3-1: SOFTWARE REQUIREMENTS - REUSE OF PRE-EXISTING SOFTWARE ELEMENTS TO IMPLEMENT ALL OR PART OF A SAFETY FUNCTION
BS EN 62619:2017	Secondary cells and batteries containing alkaline or other non-acid electrolytes. Safety requirements for secondary lithium cells and batteries, for use in industrial applications
BS EN 61511-1 : 2017	FUNCTIONAL SAFETY - SAFETY INSTRUMENTED SYSTEMS FOR THE PROCESS INDUSTRY SECTOR - PART 1: FRAMEWORK, DEFINITIONS, SYSTEM, HARDWARE AND APPLICATION PROGRAMMING REQUIREMENTS (IEC 61511-1:2016 + COR1:2016)
07/30126760 DC : 0	IEC 61559-1 - RADIATION PROTECTION INSTRUMENTATION - INSTRUMENTATION AND CONTROL OF NUCLEAR FACILITIES - PART 1: CENTRALIZED SYSTEM FOR CONTINUOUS MONITORING OF RADIATION AND/OR LEVELS OF RADIOACTIVITY
I.S. EN 50156-2:2015	ELECTRICAL EQUIPMENT FOR FURNACES AND ANCILLARY EQUIPMENT - PART 2: REQUIREMENTS FOR DESIGN, DEVELOPMENT AND TYPE APPROVAL OF SAFETY DEVICES AND SUBSYSTEMS
I.S. EN 60079-29-3:2014	EXPLOSIVE ATMOSPHERES - PART 29-3: GAS DETECTORS - GUIDANCE ON FUNCTIONAL SAFETY OF FIXED GAS DETECTION SYSTEMS
04/30116216 DC : DRAFT JUL 2004	IEC TR 61508-0 - FUNCTIONAL SAFETY OF ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY-RELATED SYSTEMS - PART 0: FUNCTIONAL SAFETY AND IEC 61508
07/30160564 DC : 0	BS ISO/IEC 15288 - SYSTEMS AND SOFTWARE ENGINEERING - SOFTWARE LIFE CYCLE PROCESSES
API RP 554-3 : 2008	PROCESS CONTROL SYSTEMS - PROJECT EXECUTION AND PROCESS CONTROL SYSTEM OWNERSHIP
07/30171041 DC : DRAFT AUG 2007	DD IEC/TS 61000-1-2 -ELECTROMAGNETIC COMPATIBILITY -GENERAL - METHODOLOGY FOR THE ACHIEVEMENT OF FUNCTIONAL SAFETY OF ELECTRICAL AND ELECTRONIC EQUIPMENT WITH REGARD TO ELECTROMAGNETIC PHENOMENA
16/30323862 DC : 0	BS ISO 22201-1 - LIFTS (ELEVATORS), ESCALATORS AND MOVING WALKS - PROGRAMMABLE ELECTRONIC SYSTEMS IN SAFETY RELATED APPLICATIONS - PART 1: LIFTS (ELEVATORS) (PESSRAL)
BS EN 60300-3-4:2008	Dependability management Application guide. Guide to the specification of dependability requirements
BS EN 81-40:2008	SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - SPECIAL LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 40: STAIRLIFTS AND INCLINED LIFTING PLATFORMS INTENDED FOR PERSONS WITH IMPAIRED MOBILITY
05/30143456 DC : DRAFT DEC 2005	IEC 61508-2 - FUNCTIONAL SAFETY OF ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY - PART 2: REQUIREMENTS FOR ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY-RELATED SYSTEMS
S.R. CLC/TR 62685:2011	INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - ASSESSMENT GUIDELINE FOR SAFETY DEVICES USING IEC 61784-3 FUNCTIONAL SAFETY COMMUNICATION PROFILES (FSCPS) (IEC/TR 62685:2010 (EQV))
EN 50271:2010	Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen - Requirements and tests for apparatus using software and/or digital technologies
BS EN 62765-1:2017	Nuclear powers plants. Instrumentation and control important to safety. Management of ageing of sensors and transmitters Pressure transmitters
I.S. EN 61131-6:2012	PROGRAMMABLE CONTROLLERS - PART 6: FUNCTIONAL SAFETY (IEC 61131-6:2012 (EQV))
UNE-EN 61508-2:2011	Functional safety of electrical/electronic/programmable electronic safety-related systems -- Part 2: Requirements for electrical/electronic/programmable electronic safety-related systems
I.S. EN 81-20:2014	SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 20: PASSENGER AND GOODS PASSENGER LIFTS
API 691 : 2017	RISK-BASED MACHINERY MANAGEMENT
BS EN 62061 : 2005	SAFETY OF MACHINERY - FUNCTIONAL SAFETY OF SAFETY-RELATED ELECTRICAL, ELECTRONIC AND PROGRAMMABLE ELECTRONIC CONTROL SYSTEMS
I.S. EN 61557-15:2014	ELECTRICAL SAFETY IN LOW VOLTAGE DISTRIBUTION SYSTEMS UP TO 1000 V A.C. AND 1500 V D.C. - EQUIPMENT FOR TESTING, MEASURING OR MONITORING OF PROTECTIVE MEASURES - PART 15: FUNCTIONAL SAFETY REQUIREMENTS FOR INSULATION MONITORING DEVICES IN IT SYSTEMS AND EQUIPMENT FOR INSULATION FAULT LOCATION IN IT SYSTEMS
CEI EN 50491-4-1 : 2014	GENERAL REQUIREMENTS FOR HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) AND BUILDING AUTOMATION AND CONTROL SYSTEMS (BACS) - PART 4-1: GENERAL FUNCTIONAL SAFETY REQUIREMENTS FOR PRODUCTS INTENDED TO BE INTEGRATED IN BUILDING ELECTRONIC SYSTEMS (HBES) AND BUILDING AUTOMATION AND CONTROL SYSTEMS (BACS)
CEI EN 50348 : 2011	STATIONARY ELECTROSTATIC APPLICATION EQUIPMENT FOR NON-IGNITABLE LIQUID COATING MATERIAL - SAFETY REQUIREMENTS
I.S. EN 415-8:2008	SAFETY OF PACKAGING MACHINES - PART 8: STRAPPING MACHINES
ISO/IEC TR 24772:2013	Information technology Programming languages Guidance to avoiding vulnerabilities in programming languages through language selection and use
I.S. EN 60300-3-4:2008	DEPENDABILITY MANAGEMENT - PART 3-4: APPLICATION GUIDE - GUIDE TO THE SPECIFICATION OF DEPENDABILITY REQUIREMENTS
I.S. EN 50495:2010	SAFETY DEVICES REQUIRED FOR THE SAFE FUNCTIONING OF EQUIPMENT WITH RESPECT TO EXPLOSION RISKS
BS EN 62304 : 2006	MEDICAL DEVICE SOFTWARE - SOFTWARE LIFE-CYCLE PROCESSES
OVE/ONORM EN 61511-1 : 2005	FUNCTIONAL SAFETY - SAFETY INSTRUMENTED SYSTEMS FOR THE PROCESS INDUSTRY SECTOR - PART 1: FRAMEWORK, DEFINITIONS, SYSTEM, HARDWARE AND SOFTWARE REQUIREMENTS
IEC TR 61508-0:2005	Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 0: Functional safety and IEC 61508 (see Functional Safety and IEC 61508)
UNE-EN 13611:2016	Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - General requirements
UNE-EN 50491-4-1:2013	General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 4-1: General functional safety requirements for products intended to be integrated in Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS)
ABS 0251 : 2016	CYBERSECURITY IMPLEMENTATION FOR THE MARINE AND OFFSHORE INDUSTRIES - CYBERSAFETY[TM] VOLUME 2
EN 13611:2015/AC:2016	SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
ISO 17894:2005	Ships and marine technology Computer applications General principles for the development and use of programmable electronic systems in marine applications
IEC 60730-1:2013+AMD1:2015 CSV	Automatic electrical controls - Part 1: General requirements
I.S. EN 61800-5-2:2017	ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 5-2: SAFETY REQUIREMENTS - FUNCTIONAL
I.S. EN 50223:2015	STATIONARY ELECTROSTATIC APPLICATION EQUIPMENT FOR IGNITABLE FLOCK MATERIAL - SAFETY REQUIREMENTS
IEC 62765-1:2015	Nuclear powers plants - Instrumentation and control important to safety - Management of ageing of sensors and transmitters - Part 1: Pressure transmitters
EN 62061:2005/A2:2015	SAFETY OF MACHINERY - FUNCTIONAL SAFETY OF SAFETY-RELATED ELECTRICAL, ELECTRONIC AND PROGRAMMABLE ELECTRONIC CONTROL SYSTEMS (IEC 62061:2005/A2:2015)
IEC 62304:2006+AMD1:2015 CSV	Medical device software - Software life cycle processes
EN 81-50:2014	Safety rules for the construction and installation of lifts - Examinations and tests - Part 50: Design rules, calculations, examinations and tests of lift components
DIN EN ISO 13849-1:2016-06	Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2015); German version EN ISO 13849-1:2015
DIN EN 81-22:2014-12	Safety rules for the construction and installation of lifts - Lifts for the transport of persons and goods - Part 22: Electric lifts with inclined path
BS ISO 22734-1:2008	HYDROGEN GENERATORS USING WATER ELECTROLYSIS PROCESS - PART 1: INDUSTRIAL AND COMMERCIAL APPLICATIONS
ISO 22734-1:2008	Hydrogen generators using water electrolysis process Part 1: Industrial and commercial applications
IEC 61869-6:2016	Instrument transformers - Part 6: Additional general requirements for low-power instrument transformers
BS EN ISO 14224:2016	Petroleum, petrochemical and natural gas industries. Collection and exchange of reliability and maintenance data for equipment
IEC 61784-3-1:2010	Industrial communication networks - Profiles - Part 3-1: Functional safety fieldbuses - Additional specifications for CPF 1
BS EN 61557-15:2014	Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. Equipment for testing, measuring or monitoring of protective measures Functional safety requirements for insulation monitoring devices in IT systems and equipment for insulation fault location in IT systems
BS EN 13463-6:2005	NON-ELECTRICAL EQUIPMENT FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES - PART 6: PROTECTION BY CONTROL OF IGNITION SOURCE 'B'
BS EN 60730-1:2011	Automatic electrical controls for household and similar use General requirements
EN 1012-3:2013	Compressors and vacuum pumps - Safety requirements - Part 3: Process compressors
EN 60079-29-3:2014	Explosive atmospheres - Part 29-3: Gas detectors - Guidance on functional safety of fixed gas detection systems
EN 61508-5:2010	Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 5: Examples of methods for the determination of safety integrity levels
EN 61511-2:2017	Functional safety - Safety instrumented systems for the process industry sector - Part 2: Guidelines for the application of IEC 61511-1
EN 61513:2013	Nuclear power plants - Instrumentation and control important to safety - General requirements for systems
CEN/TS 13763-27 : 2003	EXPLOSIVES FOR CIVIL USES - DETONATORS AND RELAYS - PART 27: DEFINITIONS, METHODS AND REQUIREMENTS FOR ELECTRONIC INITIATION SYSTEMS
EN 60947-5-3:2013	Low-voltage switchgear and controlgear - Part 5-3: Control circuit devices and switching elements - Requirements for proximity devices with defined behaviour under fault conditions (PDDB)
UNE-ISO 22734-1:2012	Hydrogen generators using water electrolysis process. Part 1: Industrial and commercial applications
I.S. EN 13611:2015/AC:2016	SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
DIN EN 81-50:2015-02	SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - EXAMINATIONS AND TESTS - PART 50: DESIGN RULES, CALCULATIONS, EXAMINATIONS AND TESTS OF LIFT COMPONENTS
EN 50348:2010	Stationary electrostatic application equipment for non-ignitable liquid coating material - Safety requirements
EN 61508-7:2010	Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 7: Overview of techniques and measures
EN 62628:2012	Guidance on software aspects of dependability
EN 50156-1:2015	Electrical equipment for furnaces and ancillary equipment - Part 1: Requirements for application design and installation
EN 50156-2:2015	Electrical equipment for furnaces and ancillary equipment - Part 2: Requirements for design, development and type approval of safety devices and subsystems
EN 12953-9:2007	Shell boilers - Part 9: Requirements for limiting devices of the boiler and accessories
EN 61000-1-2:2016	Electromagnetic compatibility (EMC) - Part 1-2: General - Methodology for the achievement of functional safety of electrical and electronic systems including equipment with regard to electromagnetic phenomena
DIN EN 81-1:2000-05	SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PART 1: ELECTRIC LIFTS
DIN EN 81-1:2010-06	SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PART 1: ELECTRIC LIFTS
EN 15333-1 : 2008/AC : 2009	RESPIRATORY EQUIPMENT - OPEN-CIRCUIT UMBILICAL SUPPLIED COMPRESSED GAS DIVING APPARATUS - PART 1: DEMAND APPARATUS
EN 50491-4-1:2012	General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 4-1: General functional safety requirements for products intended to be integrated in Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS)
EN 61508-4:2010	Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 4: Definitions and abbreviations
DIN EN 81-20:2014-11	SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 20: PASSENGER AND GOODS PASSENGER LIFTS
EN 60044-8:2002	Instrument transformers - Part 8: Electronic current transformers
EN 50270:2015	Electromagnetic compatibility - Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen
EN 61508-1:2010	Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 1: General requirements
EN 50090-2-3:2005	Home and Building Electronic Systems (HBES) - Part 2-3: System overview - General functional safety requirements for products intended to be integrated in HBES
EN 50223:2015	Stationary electrostatic application equipment for ignitable flock material - Safety requirements

Standards Referencing This Book - (Show below) - (Hide below)

IEC 61131-3:2013	Programmable controllers - Part 3: Programming languages
SA TS 19883:2020	Safety of pressure swing adsorption systems for hydrogen separation and purification (ISO/TS 19883:2017, MOD)
IEC 61508-5:2010	Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 5: Examples of methods for the determination of safety integrity levels (see Functional Safety and IEC 61508)
IEC 61508-4:2010	Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 4: Definitions and abbreviations (see Functional Safety and IEC 61508)
AS/NZS IEC 61703:2020	Mathematical expressions for reliability, availability, maintainability and maintenance support terms
AS/NZS IEC 31010:2020	Risk management - Risk assessment techniques
ISO/IEC Guide 51:2014	Safety aspects Guidelines for their inclusion in standards
AS/NZS 62061:2019	Safety of machinery - Functional safety of safety-related electrical, electronic and programmable electronic control systems (IEC 62061:2005+AMD1:2012+AMD2:2015 CSV (ED.1.2)/COR1:2015 MOD)
IEC GUIDE 104:2010	The preparation of safety publications and the use of basic safety publications and group safety publications
IEC 61508-6:2010	Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 6: Guidelines on the application of IEC 61508-2 and IEC 61508-3 (see Functional Safety and IEC 61508)
AS/NZS IEC 60812:2020	Failure modes and effects analysis (FMEA and FMECA)
IEC 61508-1:2010	Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 1: General requirements (see Functional Safety and IEC 61508)
IEC 62061:2005+AMD1:2012+AMD2:2015 CSV	Safety of machinery - Functional safety of safety-related electrical, electronic and programmable electronic control systems
IEC 61508-7:2010	Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 7: Overview of techniques and measures (see Functional Safety and IEC 61508)
IEC 61508-2:2010	Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 2: Requirements for electrical/electronic/programmable electronic safety-related systems (see Functional Safety and IEC 61508)
IEC 61800-5-2:2016	Adjustable speed electrical power drive systems - Part 5-2: Safety requirements - Functional
AS ISO/IEC/IEEE 12207:2019	Systems and software engineering - Software life cycle processes

Categories associated with this Standard - (Show below) - (Hide below)

Sub-Categories associated with this Standard - (Show below) - (Hide below)

Add To Cart

Product Format

Quantity

Buy now

Add to cart

Create account

Table of Contents - (Show below) - (Hide below)

Abstract - (Show below) - (Hide below)

General Product Information - (Show below) - (Hide below)

Committee	TC 65/SC 65A
Development Note	Stability Date: 2017. (09/2017)
Document Type	Standard
ISBN
Pages
Published
Publisher	International Electrotechnical Committee
Status	Current
Supersedes	IEC 61508-3:1998/COR1:1999 IEC 61508-3:1998

International Equivalents – Equivalent Standard(s) & Relationship - (Show below) - (Hide below)

Equivalent Standard(s)	Relationship
GOST R IEC 61508-3 : 2012	Identical
NF EN 61508-3 : 2011	Identical
NBN EN 61508-3 : 2010	Identical
NEN EN IEC 61508-3 : 2010	Identical
SANS 61508-3 : 1ED 2013	Identical
VDE 0803-3 : 2011	Identical
UNE-EN 61508-3:2011	Identical
AS 61508.3-2011	Identical
EN 61508-3:2010	Identical
DIN EN 61508-3 : 2011	Identical
BS EN 61508-3:2010	Identical
NEN IEC 61508-3 : 99 C1 99	Similar to
CEI EN 61508-3 : 2011	Identical
PN EN 61508-3 : 2010	Identical
BS IEC 61508-3 : 1998 AMD 13781	Identical
I.S. EN 61508-3:2010	Identical
BIS IS/IEC 61508-3 : 1998	Identical

Standards Referenced By This Book - (Show below) - (Hide below)

I.S. EN 60335-1:2012	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 1: GENERAL REQUIREMENTS
NF EN 50348 : 2010	STATIONARY ELECTROSTATIC APPLICATION EQUIPMENT FOR NON-IGNITABLE LIQUID COATING MATERIAL - SAFETY REQUIREMENTS
UNE-EN 60947-5-3:2014	Low-voltage switchgear and controlgear - Part 5-3: Control circuit devices and switching elements - Requirements for proximity devices with defined behaviour under fault conditions (PDDB)
UNE-EN 61508-5:2011	Functional safety of electrical/electronic/programmable electronic safety-related systems -- Part 5: Examples of methods for the determination of safety integrity levels
I.S. EN 61508-4:2010	FUNCTIONAL SAFETY OF ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY-RELATED SYSTEMS - PART 4: DEFINITIONS AND ABBREVIATIONS
BS EN 50156-2:2015	Electrical equipment for furnaces and ancillary equipment Requirements for design, development and type approval of safety devices and subsystems
BS EN 61226:2010	Nuclear power plants. Instrumentation and control important to safety. Classification of instrumentation and control functions
09/30183366 DC : 0	BS EN 13611:2007/A1 - SAFETY AND CONTROL DEVICES FOR GAS BURNERS AND GAS BURNING APPLIANCES - GENERAL REQUIREMENTS
ISO/TR 12489:2013	Petroleum, petrochemical and natural gas industries Reliability modelling and calculation of safety systems
BS EN 60079-29-3:2014	Explosive atmospheres Gas detectors. Guidance on functional safety of fixed gas detection systems
BS EN 62138:2009	NUCLEAR POWER PLANTS - INSTRUMENTATION AND CONTROL IMPORTANT FOR SAFETY - SOFTWARE ASPECTS FOR COMPUTER-BASED SYSTEMS PERFORMING CATEGORY B OR C FUNCTIONS
16/30323859 DC : 0	BS ISO 22201-2 - LIFTS (ELEVATORS), ESCALATORS AND MOVING WALKS - PROGRAMMABLE E