EN 623-4:2004
Current
The latest, up-to-date edition.
Advanced technical ceramics - Monolithic ceramics - General and textural properties - Part 4: Determination of surface roughness
06-10-2004
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Principles of conventional surface texture measurement
5 Factors affecting the determination of surface texture
of ceramics
6 Test procedure
7 Test report
Annex A (informative) - Interlaboratory evaluation of
ceramic surface texture test procedures
Bibliography
This part of EN 623 concerns the use of conventional stylus type instruments for the measurement of surface texture of advanced monolithic technical ceramics, sets the test machine measuring parameters, and recommends the adoption of certain precautions and conditions of measurement.NOTENon-contact optical methods of surface texture measurement employ a different concept using a narrow laser beam. The interaction of the beam with the surface is influenced by the angle of the surface to the beam and the reflectivity/translucence of the surface. The reflected beam is detected in a number of ways based on spot focus or beam deflection and converted into a height profile. Results from such a test are not directly equivalent to those obtained by the stylus method.
Committee |
CEN/TC 184
|
DevelopmentNote |
Supersedes ENV 623-4 (10/2004)
|
DocumentType |
Standard
|
PublisherName |
Comite Europeen de Normalisation
|
Status |
Current
|
Supersedes |
Standards | Relationship |
I.S. EN 623-4:2004 | Identical |
SN EN 623-4 : 2005 | Identical |
UNE-EN 623-4:2004 | Identical |
NEN EN 623-4 : 2004 | Identical |
DIN EN 623-4:2005-01 | Identical |
NBN EN 623-4 : 2004 | Identical |
NF EN 623-4 : 2005 | Identical |
NEN NVN ENV 623-4 : 1994 | Identical |
NS EN 623-4 : 1ED 2004 | Identical |
BS EN 623-4:2004 | Identical |
PN EN 623-4 : 2005 | Identical |
UNI EN 623-4 : 2005 | Identical |
PNE-prEN 623-4 | Identical |
DIN EN 1006:2009-10 | Advanced technical ceramics - Monolithic ceramics - Guidance on the selection of test pieces for the evaluation of properties |
13/30277008 DC : 0 | BS ISO 17162 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - MECHANICAL PROPERTIES OF MONOLITHIC CERAMICS AT ROOM TEMPERATURE - DETERMINATION OF COMPRESSIVE STRENGTH |
08/30185918 DC : 0 | BS EN 1006 - ADVANCED TECHNICAL CERAMICS - MONOLITHIC CERAMICS - GUIDANCE ON THE SELECTION OF TEST PIECES FOR THE EVALUATION OF PROPERTIES |
DD ISO/TS 10993-19:2006 | Biological evaluation of medical devices Physico-chemical, morphological and topographical characterization of materials |
CEN/TR 13233 : 2007 COR 2007 | ADVANCED TECHNICAL CERAMICS - NOTATIONS AND SYMBOLS |
BS EN 843-2:2006 | Advanced technical ceramics. Mechanical properties of monolithic ceramics at room temperature Determination of Young\'s modulus, shear modulus and Poisson\'s ratio |
BS EN 1071-4:2006 | Advanced technical ceramics. Methods of test for ceramic coatings Determination of chemical composition by electron probe microanalysis (EPMA) |
EN 1006:2009 | Advanced technical ceramics - Monolithic ceramics - Guidance on the selection of test pieces for the evaluation of properties |
DD CEN/TS 843-9:2010 | Advanced technical ceramics. Mechanical properties of monolithic ceramics at room temperature Method of test for edge-chip resistance |
BS ISO 17162:2014 | Fine ceramics (advanced ceramics, advanced technical ceramics). Mechanical properties of monolithic ceramics at room temperature. Determination of compressive strength |
S.R. CEN TS 843-9:2010 | ADVANCED TECHNICAL CERAMICS - MECHANICAL PROPERTIES OF MONOLITHIC CERAMICS AT ROOM TEMPERATURE - PART 9: METHOD OF TEST FOR EDGE-CHIP RESISTANCE |
I.S. EN 1071-4:2006 | ADVANCED TECHNICAL CERAMICS - METHODS OF TEST FOR CERAMIC COATINGS - PART 4: DETERMINATION OF CHEMICAL COMPOSITION BY ELECTRON PROBE MICROANALYSIS (EPMA) |
I.S. EN 843-2:2006 | ADVANCED TECHNICAL CERAMICS - MECHANICAL PROPERTIES OF MONOLITHIC CERAMICS AT ROOM TEMPERATURE - PART 2: DETERMINATION OF YOUNG'S MODULUS, SHEAR MODULUS AND POISSON'S RATIO |
XP CEN/TS 843-9 : 2010 XP | ADVANCED TECHNICAL CERAMICS - MECHANICAL PROPERTIES OF MONOLITHIC CERAMICS AT ROOM TEMPERATURE - PART 9: METHOD OF TEST FOR EDGE-CHIP RESISTANCE |
I.S. EN 1006:2009 | ADVANCED TECHNICAL CERAMICS - MONOLITHIC CERAMICS - GUIDANCE ON THE SELECTION OF TEST PIECES FOR THE EVALUATION OF PROPERTIES |
I.S. EN 843-1:2006 | ADVANCED TECHNICAL CERAMICS - MECHANICAL PROPERTIES OF MONOLITHIC CERAMICS AT ROOM TEMPERATURE - PART 1: DETERMINATION OF FLEXURAL STRENGTH |
DIN EN 1071-4:2006-05 | Advanced technical ceramics - Methods of test for ceramic coatings - Part 4: Determination of chemical composition by electron probe microanalysis (EPMA) |
UNI EN 14232 : 2009 | ADVANCED TECHNICAL CERAMICS - TERMS, DEFINITIONS AND ABBREVIATIONS |
BS EN 1006:2009 | Advanced technical ceramics. Monolithic ceramics. Guidance on the selection of test pieces for the evaluation of properties |
04/30125779 DC : DRAFT NOV 2004 | EN 843-2 - ADVANCED TECHNICAL CERAMICS - MONOLITHIC CERAMICS - MECHANICAL PROPERTIES AT ROOM TEMPERATURE - PART 2: DETERMINATION OF YOUNG'S MODULUS, SHEAR MODULUS AND POISSON'S RATIO |
ANSI/AAMI/ISO TIR10993-19:2006 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 19: PHYSICOCHEMICAL, MORPHOLOGICAL, AND TOPOGRAPHICAL CHARACTERIZATION OF MATERIALS |
09/30185903 DC : 0 | BS EN 14232 - ADVANCED TECHNICAL CERAMICS - TERMS, DEFINITIONS AND ABBREVIATIONS |
PREN 14232 : DRAFT 2009 | ADVANCED TECHNICAL CERAMICS - TERMS, DEFINITIONS AND ABBREVIATIONS |
PD CEN/TR 13233:2007 | Advanced technical ceramics. Notations and symbols |
UNI CEN/TS 843-9 : 2010 | ADVANCED TECHNICAL CERAMICS - MECHANICAL PROPERTIES OF MONOLITHIC CERAMICS AT ROOM TEMPERATURE - PART 9: METHOD OF TEST FOR EDGE-CHIP RESISTANCE |
04/30125773 DC : DRAFT NOV 2004 | EN 12923-1 - ADVANCED TECHNICAL CERAMICS - MONOLITHIC CERAMICS - PART 1: GENERAL PRACTICE FOR UNDERTAKING CORROSION TESTS |
04/30125782 DC : DRAFT NOV 2004 | EN 843-1 - ADVANCED TECHNICAL CERAMICS - MONOLITHIC CERAMICS - MECHANICAL PROPERTIES AT ROOM TEMPERATURE - PART 1: DETERMINATION OF FLEXURAL STRENGTH |
UNI EN 1006 : 2009 | ADVANCED TECHNICAL CERAMICS - MONOLITHIC CERAMICS - GUIDANCE ON THE SELECTION OF TEST PIECES FOR THE EVALUATION OF PROPERTIES |
CEN/TS 843-9:2010 | Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 9: Method of test for edge-chip resistance |
ISO/TS 10993-19:2006 | Biological evaluation of medical devices Part 19: Physico-chemical, morphological and topographical characterization of materials |
BS EN 843-1:2006 | Advanced technical ceramics. Mechanical properties of monolithic ceramics at room temperature Determination of flexural strength |
BS EN 12923-1:2006 | Advanced technical ceramics. Monolithic ceramics General practice for undertaking corrosion tests |
EN 843-1:2006 | Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 1: Determination of flexural strength |
EN 843-2:2006 | Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 2: Determination of Young's modulus, shear modulus and Poisson's ratio |
EN 14232:2009 | Advanced technical ceramics - Terms, definitions and abbreviations |
I.S. EN 12923-1:2006 | ADVANCED TECHNICAL CERAMICS - MONOLITHIC CERAMICS - PART 1: GENERAL PRACTICE FOR UNDERTAKING CORROSION TESTS |
BS EN 14232:2009 | Advanced technical ceramics. Terms, definitions and abbreviations |
DD CEN/TR 13233 : 2007 | ADVANCED TECHNICAL CERAMICS - NOTATIONS AND SYMBOLS |
I.S. EN 14232:2009 | ADVANCED TECHNICAL CERAMICS - TERMS, DEFINITIONS AND ABBREVIATIONS |
ISO 17162:2014 | Fine ceramics (advanced ceramics, advanced technical ceramics) — Mechanical properties of monolithic ceramics at room temperature — Determination of compressive strength |
S.R. CEN TR 13233:2007 | ADVANCED TECHNICAL CERAMICS - NOTATIONS AND SYMBOLS |
DIN EN 12923-1:2007-03 | Advanced technical ceramics - Monolithic ceramics - Part 1: General practice for undertaking corrosion tests |
EN 1071-4:2006 | Advanced technical ceramics - Methods of test for ceramic coatings - Part 4: Determination of chemical composition by electron probe microanalysis (EPMA) |
EN 12923-1:2006 | Advanced technical ceramics - Monolithic ceramics - Part 1: General practice for undertaking corrosion tests |
DIN EN 843-1:2008-08 | Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 1: Determination of flexural strength |
DIN EN 843-2:2007-03 | Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 2: Determination of Young's modulus, shear modulus and Poisson's ratio |
ISO/IEC 17025:2005 | General requirements for the competence of testing and calibration laboratories |
ISO 12179:2000 | Geometrical Product Specifications (GPS) Surface texture: Profile method Calibration of contact (stylus) instruments |
EN ISO 13565-3:2000 | Geometrical Product Specifications (GPS) - Surface texture: Profile method; surfaces having stratified functional properties - Part 3: Height characterization using the material probability curve (ISO 13565-3:1998) |
ISO 4287:1997 | Geometrical Product Specifications (GPS) — Surface texture: Profile method — Terms, definitions and surface texture parameters |
ISO 13565-3:1998 | Geometrical Product Specifications (GPS) Surface texture: Profile method; Surfaces having stratified functional properties Part 3: Height characterization using the material probability curve |
EN ISO 4288:1997 | Geometrical product specifications (GPS) - Surface texture: Profile method - Rules and procedures for the assessment of surface texture (ISO 4288:1996) |
ENV 1006 : DRAFT 2003 | ADVANCED TECHNICAL CERAMICS - MONOLITHIC CERAMICS - GUIDANCE ON THE SELECTION OF TEST PIECES FOR THE EVALUATION OF PROPERTIES |
EN 623-1:2006 | Advanced technical ceramics - Monolithic ceramics - General and textural properties - Part 1: Determination of the presence of defects by dye penetration |
EN ISO 13565-2:1997 | Geometrical product specifications (GPS) - Surface texture: Profile method; surfaces having stratified functional properties - Part 2: Height characterization using the linear material ratio curve (ISO 13565-2:1996) |
ISO 5436-2:2012 | Geometrical product specifications (GPS) — Surface texture: Profile method; Measurement standards — Part 2: Software measurement standards |
EN ISO 5436-2:2012 | Geometrical product specifications (GPS) - Surface texture: Profile method; Measurement standards - Part 2: Software measurement standards (ISO 5436-2:2012) |
ISO 3274:1996 | Geometrical Product Specifications (GPS) — Surface texture: Profile method — Nominal characteristics of contact (stylus) instruments |
ISO 5436-1:2000 | Geometrical Product Specifications (GPS) — Surface texture: Profile method; Measurement standards — Part 1: Material measures |
EN ISO 13565-1:1997 | Geometrical product specifications (GPS) - Surface texture: Profile method; surfaces having stratified functional properties - Part 1: Filtering and general measurement conditions (ISO 13565-1:1996) |
EN ISO 3274:1997 | Geometrical product specifications (GPS) - Surface texture: Profile method - Nominal characteristics of contact (stylus) instruments (ISO 3274:1996) |
EN ISO 5436-1:2000 | Geometrical Product Specifications (GPS) - Surface texture: Profile method; Measurement standards - Part 1: Material measures (ISO 5436-1:2000) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.