• Shopping Cart
    There are no items in your cart

EN 624:2011

Current

Current

The latest, up-to-date edition.

Specification for dedicated LPG appliances - Room sealed LPG space heating equipment for installation in vehicles and boats

Published date

02-03-2011

Sorry this product is not available in your region.

Foreword
1 Scope
2 Normative references
3 Terms, definitions and symbols
4 Requirements
5 Safety, constructional and performance
  characteristics
6 Test methods
7 Marking and instruction literature
Annex A (normative) - Supply situation in various countries
Annex B (normative) - Appliances using water as a heat
        transfer medium
Annex ZA (informative) - Relationship between this European
         Standard and the Essential Requirements of EU
         Directive 2009/142/EC "Gas appliances"
Bibliography

This European standard specifies the characteristics of safety, construction, performance and efficiency, the test methods and marking, of room sealed space heating equipment of type C (see CEN/TR 1749) with combustion air intake and outlet for the products of combustion in the wall, roof or floor, combined or not. These are referred to in the body of the text as "heaters", burning LPG, for vehicles and boats.This European standard only covers room sealed heaters also including those which have a combustion air fan, an integral hot air fan or both, only for vehicles and boats which are used for residential, recreational and commercial purposes. This European standard applies to heaters which are installed either outside or inside the habitable volume, but which have a combustion circuit sealed from the vehicle's interior, and nominal heat input which does not exceed 10 kW (Hs) operated at supply pressure of 30 mbar, 28 mbar, 37 mbar and 50 mbar, using, where appropriate, 12 V or 24 V DC electrical supply.Room sealed LPG space heating appliances for vehicles and boats are using very often warm air as a heat transfer medium. Annex B specifies additional requirements for appliances using water as a heat transfer medium.For private cars and vehicles or boats used for the transport of dangerous goods or for commercial personnel transport additional requirements may be necessary.This European standard does not cover requirements for storage water heaters (boilers) (see EN 15033). For appliances producing additional sanitary hot water (combi-boilers), see relevant clauses of EN 15033. NOTEIf a LPG operated heater is installed in a motorized vehicle being subject to European road traffic legislation, the directives of the Council for the approximation of the laws, regulations and administrative provisions of the member states relating to the heating of the interior of motor vehicles should be applied.These heaters are also suitable for caravan holiday homes.

Committee
CEN/TC 181
DevelopmentNote
Supersedes PREN 624. (08/2011)
DocumentType
Standard
PublisherName
Comite Europeen de Normalisation
Status
Current
Supersedes

Standards Relationship
NBN EN 1647 : 2012 Identical
NBN EN 624 : 2011 Identical
NF EN 624 : 2011 Identical
NEN EN 624 : 2011 Identical
NS EN 624 : 2011 Identical
I.S. EN 624:2011 Identical
PN EN 624 : 2011 Identical
SN EN 624:2011 Identical
UNI EN 624 : 2011 Identical
UNE-EN 624:2011 Identical
BS EN 624:2011 Identical
DIN EN 624:2011-10 Identical

BS EN ISO 10239:2017 Small craft. Liquefied petroleum gas (LPG) systems
02/103831 DC : DRAFT MAY 2002 PREN 1647 - LEISURE ACCOMMODATION VEHICLES - CARAVAN HOLIDAY HOMES - HABITATION REQUIREMENTS RELATING TO HEALTH AND SAFETY
17/30354242 DC : 0 BS EN 1647 - LEISURE ACCOMMODATION VEHICLES - CARAVAN HOLIDAY HOMES - HABITATION REQUIREMENTS RELATING TO HEALTH AND SAFETY
BS EN 721:2004 Leisure accommodation vehicles. Safety ventilation requirements
DIN EN 15033:2007-02 Room sealed storage water heaters for the production of sanitary hot water using LPG for vehicles and boats
UNI EN 1949 : 2013 SPECIFICATION FOR THE INSTALLATION OF LPG SYSTEMS FOR HABITATION PURPOSES IN LEISURE ACCOMMODATION VEHICLES AND ACCOMMODATION PURPOSES IN OTHER VEHICLES
11/30237572 DC : 0 BS EN 1647 - LEISURE ACCOMMODATION VEHICLES - CARAVAN HOLIDAY HOMES - HABITATION REQUIREMENTS RELATING TO HEALTH AND SAFETY
09/30201899 DC : 0 BS EN 1949 - SPECIFICATION FOR THE INSTALLATION OF LPG SYSTEMS FOR HABITATION PURPOSES IN LEISURE ACCOMMODATION VEHICLES AND ACCOMMODATION PURPOSES IN OTHER VEHICLES
ISO 10239:2014 Small craft Liquefied petroleum gas (LPG) systems
I.S. EN 1647:2012 LEISURE ACCOMMODATION VEHICLES - CARAVAN HOLIDAY HOMES - HABITATION REQUIREMENTS RELATING TO HEALTH AND SAFETY
UNI EN 1647 : 2012 LEISURE ACCOMMODATION VEHICLES - CARAVAN HOLIDAY HOMES - HABITATION REQUIREMENTS RELATING TO HEALTH AND SAFETY
UNE-EN ISO 10239:2017 Small craft - Liquefied petroleum gas (LPG) systems (ISO 10239:2014)
I.S. EN 1949:2011 SPECIFICATION FOR THE INSTALLATION OF LPG SYSTEMS FOR HABITATION PURPOSES IN LEISURE ACCOMMODATION VEHICLES AND ACCOMMODATION PURPOSES IN OTHER VEHICLES (INCLUDING IRISH NATIONAL ANNEX)
04/30124766 DC : DRAFT NOV 2004 EN 15033 - ROOM SEALED STORAGE WATER HEATERS FOR THE PRODUCTION OF SANITARY HOT WATER USING LPG VEHICLES AND BOATS
PREN 1949 : DRAFT 2009 SPECIFICATION FOR THE INSTALLATION OF LPG SYSTEMS FOR HABITATION PURPOSES IN LEISURE ACCOMMODATION VEHICLES AND ACCOMMODATION PURPOSES IN OTHER VEHICLES
I.S. EN ISO 10239:2017 SMALL CRAFT - LIQUEFIED PETROLEUM GAS (LPG) SYSTEMS (ISO 10239:2014)
DIN EN 1949:2013-05 Specification for the installation of LPG systems for habitation purposes in leisure accommodation vehicles and accommodation purposes in other vehicles (includes Amendment A1:2013)
UNE-EN 1949:2011 Specification for the installation of LPG systems for habitation purposes in leisure accommodation vehicles and accommodation purposes in other vehicles
I.S. EN 721:2004 LEISURE ACCOMMODATION VEHICLES - SAFETY VENTILATION REQUIREMENTS
UNE-EN 1647:2013 Leisure accommodation vehicles - Caravan holiday homes - Habitation requirements relating to health and safety
DIN EN ISO 10239:2015-05 SMALL CRAFT - LIQUEFIED PETROLEUM GAS (LPG) SYSTEMS (ISO 10239:2014)
13/30261510 DC : 0 BS EN ISO 10239 - SMALL CRAFT - LIQUEFIED PETROLEUM GAS (LPG) SYSTEMS
EN 1647:2012 Leisure accommodation vehicles - Caravan holiday homes - Habitation requirements relating to health and safety
DIN EN 1647:2012-10 LEISURE ACCOMMODATION VEHICLES - CARAVAN HOLIDAY HOMES - HABITATION REQUIREMENTS RELATING TO HEALTH AND SAFETY
PREN 1647 : DRAFT 2017 VEHICULES HABITABLES DE LOISIRS - RESIDENCES MOBILES - EXIGENCES D'HABITATION RELATIVES A LA SANTE ET A LA SECURITE
BS EN 1949:2011+A1:2013 Specification for the installation of LPG systems for habitation purposes in leisure accommodation vehicles and accommodation purposes in other vehicles
BS EN 15033:2006 Room sealed storage water heaters for the production of sanitary hot water using LPG for vehicles and boats
EN ISO 10239:2017 Small craft - Liquefied petroleum gas (LPG) systems (ISO 10239:2014)
EN 721:2004 Leisure accommodation vehicles - Safety ventilation requirements
06/30132025 DC : DRAFT JULY 2006 EN ISO 10239 - SMALL CRAFT - LIQUEFIED PETROLEUM GAS (LPG) SYSTEMS
BS EN 1647:2012 Leisure accommodation vehicles. Caravan holiday homes. Habitation requirements relating to health and safety
BS EN 1949 : 2011 SPECIFICATION FOR THE INSTALLATION OF LPG SYSTEMS FOR HABITATION PURPOSES IN LEISURE ACCOMMODATION VEHICLES AND ACCOMMODATION PURPOSES IN OTHER VEHICLES
DIN EN 721:2004-12 LEISURE ACCOMMODATION VEHICLES - SAFETY VENTILATION REQUIREMENTS
EN 1949:2011+A1:2013 Specification for the installation of LPG systems for habitation purposes in leisure accommodation vehicles and accommodation purposes in other vehicles

IEC 60335-2-102:2004+AMD1:2008+AMD2:2012 CSV Household and similar electrical appliances - Safety - Part 2-102:Particular requirements for gas, oil and solid-fuel burning appliances having electrical connections
EN 10226-2:2005 Pipe threads where pressure tight joints are made on the threads - Part 2: Taper external threads and taper internal threads - Dimensions, tolerances and designation
EN 1057:2006+A1:2010 Copper and copper alloys - Seamless, round copper tubes for water and gas in sanitary and heating applications
ISO 7637-2:2011 Road vehicles Electrical disturbances from conduction and coupling Part 2: Electrical transient conduction along supply lines only
IEC 60335-2-21:2012 Household and similar electrical appliances - Safety - Part 2-21: Particular requirements for storage water heaters
EN 751-2:1996 Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water - Part 2: Non-hardening jointing compounds
2004/108/EC : 2004 DIRECTIVE 2004/108/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 15 DECEMBER 2004 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO ELECTROMAGNETIC COMPATIBILITY AND REPEALING DIRECTIVE 89/336/EC
2009/142/EC : 2009 DIRECTIVE 2009/142/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 30 NOVEMBER 2009 RELATING TO APPLIANCES BURNING GASEOUS FUELS (TEXT WITH EEA RELEVANCE)
EN 13878:2003 Leisure accommodation vehicles - Terms and definitions
EN ISO 3166-1:2014 Codes for the representation of names of countries and their subdivisions - Part 1: Country codes (ISO 3166-1:2013)
EN 161:2011+A3:2013 Automatic shut-off valves for gas burners and gas appliances
EN ISO 228-1:2003 Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation (ISO 228-1:2000)
EN 60335-2-21:2003/corrigendum Oct. 2010 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-21: PARTICULAR REQUIREMENTS FOR STORAGE WATER HEATERS
EN 437:2003+A1:2009 Test gases - Test pressures - Appliance categories
EN 1949:2011+A1:2013 Specification for the installation of LPG systems for habitation purposes in leisure accommodation vehicles and accommodation purposes in other vehicles
CEN/TR 1749:2014 European scheme for the classification of gas appliances according to the method of evacuation of the combustion products (types)
EN 60335-2-102:2016 Household and similar electrical appliances - Safety - Part 2-102: Particular requirements for gas, oil and solid-fuel burning appliances having electrical connections
EN 751-1:1996 Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water - Part 1: Anaerobic jointing compounds
EN 60068-2-6:2008 Environmental testing - Part 2-6: Tests - Test Fc: Vibration (sinusoidal)
ISO 3166-1:2013 Codes for the representation of names of countries and their subdivisions Part 1: Country codes
EN 60335-1:2012/A13:2017 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60335-1:2010, MODIFIED)
EN 298:2012 Automatic burner control systems for burners and appliances burning gaseous or liquid fuels
EN 549:1994 Rubber materials for seals and diaphragms for gas appliances and gas equipment
EN 10226-1:2004 Pipe threads where pressure tight joints are made on the threads - Part 1: Taper external threads and parallel internal threads - Dimensions, tolerances and designation
ISO 228-1:2000 Pipe threads where pressure-tight joints are not made on the threads Part 1: Dimensions, tolerances and designation
EN 60730-1:2016 Automatic electrical controls - Part 1: General requirements
IEC 60730-1:2013+AMD1:2015 CSV Automatic electrical controls - Part 1: General requirements

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.