• There are no items in your cart

EN ISO 8230 : 1997

Superseded

Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

SAFETY REQUIREMENTS FOR DRY-CLEANING MACHINES USING PERCHLOROETHYLENE

Superseded date

01-10-2008

Published date

12-01-2013

1 Scope
2 Normative references
3 Definitions
4 Hazards
5 Safety requirements and/or measures for the
  hazards identified in clause 4
  5.1 Hazards associated with the use of dry-cleaning
      machines
  5.2 Hazards associated with phases of "life" of a
      machine other than use
6 Verification of safety requirements and/or measures
7 Information concerning machine use
  7.1 General
  7.2 Machine plate
  7.3 Warning notices
  7.4 Instruction handbook
  7.5 Special points of information and instructions
Annex A (informative) Bibliography
Annex ZA (normative) Normative references to international
         publications with their relevant European publications
Annex ZB (informative) Relationship of this European Standard
         with EU Directives

Applies to closed-circuit dry-cleaning machines of all sizes meant for industrial use,(including retail operation) for cleaning of articles made from textile, leather, furs and skins, by means of perchloroethylene (usually known as perc) only as liquid solvent.

Committee
TC 214
DocumentType
Standard
PublisherName
Comite Europeen de Normalisation
Status
Superseded
SupersededBy

EN 50081-1:1992 Electromagnetic compatibility - Generic emission standard - Part 1: Residential, commercial and light industry
ISO 9004-1:1994 Quality management and quality system elements Part 1: Guidelines
IEC 60364-5-54:2011 Low-voltage electrical installations - Part 5-54: Selection and erection of electrical equipment - Earthing arrangements and protective conductors
EN 264 : 1991 SAFETY SHUT OFF DEVICES FOR COMBUSTION PLANTS USING LIQUID FUELS - SAFETY REQUIREMENTS AND TESTING
EN 1037:1995+A1:2008 Safety of machinery - Prevention of unexpected start-up
ISO 14119:2013 Safety of machinery Interlocking devices associated with guards Principles for design and selection
IEC 60068-1:2013 Environmental testing - Part 1: General and guidance
ISO 11161:2007 Safety of machinery — Integrated manufacturing systems — Basic requirements
ISO/TR 11688-1:1995 Acoustics Recommended practice for the design of low-noise machinery and equipment Part 1: Planning
EN 894-2:1997+A1:2008 Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 2: Displays
ISO 5232:1998 Graphical symbols for textile machinery
EN 61310-2:2008 Safety of machinery - Indication, marking and actuation - Part 2: Requirements for marking
ISO 6178:1983 Centrifuges Construction and safety rules Method for the calculation of the tangential stress in the shell of a cylindrical centrifuge rotor
EN ISO 10472-6:2008 Safety requirements for industrial laundry machinery - Part 6: Ironing and fusing presses (ISO 10472-6:1997)
ISO 4413:2010 Hydraulic fluid power General rules and safety requirements for systems and their components
ISO 13852:1996 Safety of machinery Safety distances to prevent danger zones being reached by the upper limbs
IEC 60204-1:2016 Safety of machinery - Electrical equipment of machines - Part 1: General requirements
EN 1050 : 1996 SAFETY OF MACHINERY - PRINCIPLES FOR RISK ASSESSMENT
EN 614-1:2006+A1:2009 Safety of machinery - Ergonomic design principles - Part 1: Terminology and general principles
EN 161:2011+A3:2013 Automatic shut-off valves for gas burners and gas appliances
ISO 10472-6:1997 Safety requirements for industrial laundry machinery Part 6: Ironing and fusing presses
ISO 9002:1994 Quality systems — Model for quality assurance in production, installation and servicing
ISO 447:1984 Machine tools Direction of operation of controls
ISO 10472-1:1997 Safety requirements for industrial laundry machinery Part 1: Common requirements
ISO 13853:1998 Safety of machinery Safety distances to prevent danger zones being reached by the lower limbs
EN 50081-2:1993 Electromagnetic compatibility - Generic emission standard - Part 2: Industrial environment
IEC 60801-1:1984 Electromagnetic compatibility for industrial-process measurement and control equipment. Part 1: General introduction
EN 125:2010+A1:2015 Flame supervision devices for gas burning appliances - Thermoelectric flame supervision devices
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV Degrees of protection provided by enclosures (IP Code)
EN 953:1997+A1:2009 Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards
EN 842:1996+A1:2008 Safety of machinery - Visual danger signals - General requirements, design and testing
IEC 60947-1:2007+AMD1:2010+AMD2:2014 CSV Low-voltage switchgear and controlgear - Part 1: General rules
EN 230:2005 Automatic burner control systems for oil burners
ISO 12100-2:2003 Safety of machinery Basic concepts, general principles for design Part 2: Technical principles
ISO 9001:2015 Quality management systems — Requirements
ISO 1219-1:2012 Fluid power systems and components — Graphical symbols and circuit diagrams — Part 1: Graphical symbols for conventional use and data-processing applications
IEC 60801-3:1984 Electromagnetic compatibility for industrial-process measurement and control equipment - Part 3: Radiated electromagnetic field requirements
ISO 9003:1994 Quality systems Model for quality assurance in final inspection and test
EN 983:1996+A1:2008 Safety of machinery - Safety requirements for fluid power systems and their components - Pneumatics
ISO 12100-1:2003 Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology
ISO 4414:2010 Pneumatic fluid power General rules and safety requirements for systems and their components
ISO 13850:2015 Safety of machinery Emergency stop function Principles for design
EN 298:2012 Automatic burner control systems for burners and appliances burning gaseous or liquid fuels
EN 88:1991/A1:1996 PRESSURE GOVERNORS FOR GAS APPLIANCES FOR INLET PRESSURE UP TO 200 MBAR
ISO 614:2012 Ships and marine technology — Toughened safety glass panes for rectangular windows and side scuttles — Punch method of non-destructive strength testing
IEC 60947-2:2016 Low-voltage switchgear and controlgear - Part 2: Circuit-breakers
EN 457 : 1992 SAFETY OF MACHINERY - AUDITORY DANGER SIGNALS - GENERAL REQUIREMENTS, DESIGN AND TESTING
IEC 60309-1:1999+AMD1:2005+AMD2:2012 CSV Plugs, socket-outlets and couplers for industrial purposes - Part 1: General requirements
ISO 13849-1:2015 Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design
EN 61310-1:2008 Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, acoustic and tactile signals
IEC 60445:2017 Basic and safety principles for man-machine interface, marking and identification - Identification of equipment terminals, conductor terminations and conductors
EN 286-1:1998/A2:2005 SIMPLE UNFIRED PRESSURE VESSELS DESIGNED TO CONTAIN AIR OR NITROGEN - PART 1: PRESSURE VESSELS FOR GENERAL PURPOSES
ISO 9000-1:1994 Quality management and quality assurance standards — Part 1: Guidelines for selection and use
ISO 8232:1988 Closed-circuit dry-cleaning machines — Defining and checking of machine characteristics
EN ISO 10472-1:2008 Safety requirements for industrial laundry machinery - Part 1: Common requirements (ISO 10472-1:1997)
EN 60204-1 : 2006 COR 2010 SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS
EN 894-1:1997+A1:2008 Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 1: General principles for human interactions with displays and control actuators

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.