• Shopping Cart
    There are no items in your cart

EN ISO 9606-4:1999

Current

Current

The latest, up-to-date edition.

Approval testing of welders - Fusion welding - Part 4: Nickel and nickel alloys (ISO 9606-4:1999)

Published date

01-04-1999

Sorry this product is not available in your region.

Foreword
Introduction
1 Scope
2 Normative references
3 Definitions
4 Symbols and abbreviations
5 Essential variables for approval testing
6 Range of approval for the welder
7 Examination and testing
8 Acceptance requirements for test pieces
9 Re-tests
10 Period of validity
11 Certificate
12 Designation
Annex A (informative) - Job knowledge
Annex ZA (informative) - Bibliography
Annex ZB (informative) - Clauses of this European
         Standard addressing essential requirements
         or other provisions of EU Directives

This standard specifies essential requirements, ranges of approval, test conditions, acceptance requirements andcertification for the approval testing of welder performance for the welding of nickel.This standard applies to the approval testing of welders for the fusion welding of nickel.This standard is intended to provide the basis for the mutual recognition by examining bodies for approval relating towelders' competence in the various fields of application. Tests will be carried out in accordance with this standard unlessmore severe tests are specified by the relevant application standard when these are applied.During the approval test the welder should be required to show adequate practical experience and job knowledge (testnon mandatory) of the welding processes, materials and safety requirements for which he is to be approved; informationon these aspects is given in Annex A.This standard is applicable when the welder's approval testing is required by the purchaser, by inspection authorities orby other organizations.The welding processes referred to in this standard include those fusion welding processes which are designated asmanual or partly mechanized welding. It does not cover fully mechanized and automatic processes (see 5.2).This standard covers approval testing of welders for work on semi-finished and finished products made from wrought,forged or cast material types listed in 5.4.The certificate of approval testing is issued under the sole responsibility of the examiner or examining body.

Committee
CEN/TC 121
DocumentType
Standard
PublisherName
Comite Europeen de Normalisation
Status
Current

EN 13445-10:2015 Unfired pressure vessels - Part 10: Additional requirements for pressure vessels of nickel and nickel alloys
09/30202307 DC : 0 BS EN 12514-1 - PARTS FOR SUPPLY SYSTEMS FOR CONSUMING UNITS WITH LIQUID FUELS - PART 1: SAFETY REQUIREMENTS AND TESTS - TERMINOLOGY, GENERAL REQUIREMENTS
BS EN 14917 : 2009 METAL BELLOWS EXPANSION JOINTS FOR PRESSURE APPLICATIONS
I.S. EN ISO 15612:2004 SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - QUALIFICATION BY ADOPTION OF A STANDARD WELDING PROCEDURE
EN 12972:2015 Tanks for transport of dangerous goods - Testing, inspection and marking of metallic tanks
EN 14917:2009+A1:2012 Metal bellows expansion joints for pressure applications
16/30334287 DC : 0 BS EN 334 - GAS PRESSURE REGULATORS FOR INLET PRESSURE UP TO 100 BAR
DIN EN 334:2016-05 (Draft) GAS PRESSURE REGULATORS FOR INLET PRESSURES UP TO 100 BAR
I.S. EN ISO 15607:2004 SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - GENERAL RULES
I.S. EN 14382:2005 SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR
DIN EN 12972:2015-04 TANKS FOR TRANSPORT OF DANGEROUS GOODS - TESTING, INSPECTION AND MARKING OF METALLIC TANKS
BS EN 14382 : 2005 SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR
EN 1011-1:2009 Welding - Recommendations for welding of metallic materials - Part 1: General guidance for arc welding
I.S. EN 15085-4:2007 RAILWAY APPLICATIONS - WELDING OF RAILWAY VEHICLES AND COMPONENTS - PART 4: PRODUCTION REQUIREMENTS
DIN EN 14917:2012-06 Metal bellows expansion joints for pressure applications (includes Amendment A1:2012)
14/30293465 DC : 0 BS EN 13445-10 - UNFIRED PRESSURE VESSELS - PART 10: ADDITIONAL REQUIREMENTS FOR PRESSURE VESSELS OF NICKEL AND NICKEL ALLOYS
DIN EN ISO 15612:2016-09 (Draft) SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - QUALIFICATION BY ADOPTION OF A STANDARD WELDING PROCEDURE
BS EN 13445-10:2015 Unfired pressure vessels Additional requirements for pressure vessels of nickel and nickel alloys
ONORM EN 334 : JUN 2009 GAS PRESSURE REGULATORS FOR INLET PRESSURES UP TO 100 BAR
I.S. EN 334:2005 GAS PRESSURE REGULATORS FOR INLET PRESSURES UP TO 100 BAR
BS EN 13611:2015 Safety and control devices for burners and appliances burning gaseous and/or liquid fuels. General requirements
I.S. EN 13445-10:2015 UNFIRED PRESSURE VESSELS - PART 10: ADDITIONAL REQUIREMENTS FOR PRESSURE VESSELS OF NICKEL AND NICKEL ALLOYS
BS EN ISO 15612:2004 Specification and qualification of welding procedures for metallic materials. Qualification by adoption of a standard welding procedure
EN 267:2009+A1:2011 Automatic forced draught burners for liquid fuels
DIN EN 15085-4:2008-01 Railway applications - Welding of railway vehicles and components - Part 4: Production requirements
DIN EN 1011-1:2009-07 WELDING - RECOMMENDATIONS FOR WELDING OF METALLIC MATERIALS - PART 1: GENERAL GUIDANCE FOR ARC WELDING
DIN EN 267:2012-03 (Draft) AUTOMATIC FORCED DRAUGHT BURNERS FOR LIQUID FUELS
DIN EN 267:2011-11 Automatic forced draught burners for liquid fuels
BS EN 334 : 2005 GAS PRESSURE REGULATORS FOR INLET PRESSURES UP TO 100 BAR
DIN EN 13611:2019-06 Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - General requirements
DIN EN 14585-1:2006-04 Corrugated metal hose assemblies for pressure applications - Part 1: Requirements
I.S. EN 1011-1:2009 WELDING - RECOMMENDATIONS FOR WELDING OF METALLIC MATERIALS - PART 1: GENERAL GUIDANCE FOR ARC WELDING
00/708222 DC : DRAFT MAY 2000 BS EN ISO 15614-1 SPECIFICATION AND APPROVAL OF WELDING PROCEDURES FOR METALLIC MATERIALS -WELDING PROCEDURE TEST - PART 1: ARC AND GAS WELDING OF STEELS AND ARC WELDING OF NICKEL AND NICKEL ALLOYS
07/30158903 DC : 0 BS EN 1011-1 - WELDING - RECOMMENDATIONS FOR WELDING OF METALLIC MATERIALS - PART 1: GENERAL GUIDANCE FOR ARC WELDING
12/30257298 DC : 0 BS EN 676 - FORCED DRAUGHT BURNERS FOR GASEOUS FUELS
12/30258099 DC BS EN 267. Forced draught burners for liquid fuels
UNE-EN 12972:2015 Tanks for transport of dangerous goods - Testing, inspection and marking of metallic tanks
I.S. EN 12972:2015 TANKS FOR TRANSPORT OF DANGEROUS GOODS - TESTING, INSPECTION AND MARKING OF METALLIC TANKS
ISO 15612:2004 Specification and qualification of welding procedures for metallic materials Qualification by adoption of a standard welding procedure
I.S. EN 14917:2009 METAL BELLOWS EXPANSION JOINTS FOR PRESSURE APPLICATIONS
BS EN 267 : 2009 AUTOMATIC FORCED DRAUGHT BURNERS FOR LIQUID FUELS
DIN EN 676:2012-03 (Draft) AUTOMATIC FORCED DRAUGHT BURNERS FOR GASEOUS FUELS
DIN EN 14382:2016-05 (Draft) SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR
BS EN 12972:2015 Tanks for transport of dangerous goods. Testing, inspection and marking of metallic tanks
UNI EN 267 : 2011 AUTOMATIC FORCED DRAUGHT BURNERS FOR LIQUID FUELS
ONORM EN 676 : 2008 AUTOMATIC FORCED DRAUGHT BURNERS FOR GASEOUS FUELS
EN 15085-4:2007 Railway applications - Welding of railway vehicles and components - Part 4: Production requirements
UNI EN 14382 : 2009 SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR
UNI EN 1011-1 : 2009 WELDING - RECOMMENDATIONS FOR WELDING OF METALLIC MATERIALS - PART 1: GENERAL GUIDANCE FOR ARC WELDING
UNI EN 676 : 2008 AUTOMATIC FORCED DRAUGHT BURNERS FOR GASEOUS FUELS
PREN 12972 : DRAFT 2017 TANKS FOR TRANSPORT OF DANGEROUS GOODS - TESTING, INSPECTION AND MARKING OF METALLIC TANKS
PREN 676 : DRAFT 2012 FORCED DRAUGHT BURNERS FOR GASEOUS FUELS
UNI EN 14917 : 2012 METAL BELLOWS EXPANSION JOINTS FOR PRESSURE APPLICATIONS
DIN EN 13445-10:2016-05 Unfired pressure vessels - Part 10: Additional requirements for pressure vessels of nickel and nickel alloys
UNE-EN 13445-10:2016 Unfired pressure vessels - Part 10: Additional requirements for pressure vessels of nickel and nickel alloys
UNI EN ISO 15612 : 2006 SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - QUALIFICATION BY ADOPTION OF A STANDARD WELDING PROCEDURE
17/30360691 DC : 0 BS EN 12972 - TANKS FOR TRANSPORT OF DANGEROUS GOODS - TESTING, INSPECTION AND MARKING OF METALLIC TANKS
I.S. EN 13611:2015 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
EN ISO 15612:2004 Specification and qualification of welding procedures for metallic materials - Qualification by adoption of a standard welding procedure (ISO 15612:2004)
I.S. EN 267:2009 AUTOMATIC FORCED DRAUGHT BURNERS FOR LIQUID FUELS
ISO 15607:2003 Specification and qualification of welding procedures for metallic materials General rules
BS EN 15085-4:2007 Railway applications. Welding of railway vehicles and components Production requirements
BS EN ISO 15607:2003 Specification and qualification of welding procedures for metallic materials. General rules
BS EN 1011-1:2009 Welding. Recommendations for welding of metallic materials General guidance for arc welding
BS EN 676 : 2003 AUTOMATIC FORCED DRAUGHT BURNERS FOR GASEOUS FUELS
DIN EN 676:2008-11 Automatic forced draught burners for gaseous fuels (includes Amendment A2:2008)
EN 14585-1:2006 Corrugated metal hose assemblies for pressure applications - Part 1: Requirements
EN 16668:2016+A1:2018 Industrial valves - Requirements and testing for metallic valves as pressure accessories
EN ISO 15607:2003 Specification and qualification of welding procedures for metallic materials - General rules (ISO 15607:2003)
EN 334:2005+A1:2009 Gas pressure regulators for inlet pressures up to 100 bar
12/30257022 DC : 0 BS EN 13611 - SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS OR LIQUID FUELS - GENERAL REQUIREMENTS
12/30259217 DC : 0 BS EN 12972 - TANKS FOR TRANSPORT OF DANGEROUS GOODS - TESTING, INSPECTION AND MARKING OF METALLIC TANKS
17/30360051 DC : 0 BS EN 13611 - SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
I.S. EN 16668:2016 INDUSTRIAL VALVES - REQUIREMENTS AND TESTING FOR METALLIC VALVES AS PRESSURE ACCESSORIES
UNI EN 334 : 2009 GAS PRESSURE REGULATORS FOR INLET PRESSURES UP TO 100 BAR
DIN EN 13611:2016-09 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
UNE-EN 13611:2016 Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - General requirements
PREN 13611 : DRAFT 2017 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
UNE-EN 14917:2011 Metal bellows expansion joints for pressure applications
KTA 3201.3 : 2007(R2012) COMPONENTS OF THE REACTOR COOLANT PRESSURE BOUNDARY OF LIGHT WATER REACTORS - PART 3: MANUFACTURE
I.S. EN 676:2003 AUTOMATIC FORCED DRAUGHT BURNERS FOR GASEOUS FUELS
BS EN 14585-1:2006 Corrugated metal hose assemblies for pressure applications Requirements
I.S. EN 13611:2015/AC:2016 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
DIN EN ISO 15607:2004-03 SPECIFICATION AND QUALIFICATION OF WELDING - PROCEDURES FOR METALLIC MATERIALS - GENERAL RULES

CR 12187 : 1995 WELDING - GUIDELINES FOR A GROUPING SYSTEM OF MATERIALS FOR WELDING PURPOSES
EN 1321:1996 Destructive tests on welds in metallic materials - Macroscopic and microscopic examination of welds
EN ISO 6947:2011 Welding and allied processes - Welding positions (ISO 6947:2011)
ISO 9017:2001 Destructive tests on welds in metallic materials Fracture test
ISO 9606-1:2012 Qualification testing of welders — Fusion welding — Part 1: Steels
ISO 5173:2009 Destructive tests on welds in metallic materials — Bend tests
EN 910 : 1996 DESTRUCTIVE TESTS ON WELDS IN METALLIC MATERIALS - BEND TESTS
ISO 5817:2014 Welding — Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) — Quality levels for imperfections
EN 288-2:1992/A1:1997 SPECIFICATION AND APPROVAL OF WELDING PROCEDURES FOR METALLIC MATERIALS - PART 2: WELDING PROCEDURE SPECIFICATION FOR ARC WELDING
ISO 857:1990 Welding, brazing and soldering processes — Vocabulary
ISO 1106-1:1984 Recommended practice for radiographic examination of fusion welded joints — Part 1: Fusion welded butt joints in steel plates up to 50 mm thick
EN 1289:1998/A2:2003 NON-DESTRUCTIVE TESTING OF WELDS - PENETRANT TESTING OF WELDS - ACCEPTANCE LEVELS
ISO 1106-2:1985 Recommended practice for radiographic examination of fusion welded joints Part 2: Fusion welded butt joints in steel plates thicker than 50 mm and up to and including 200 mm in thickness
EN 24063 : 1992 WELDING, BRAZING, SOLDERING AND BRAZE WELDING OF METALS - NOMENCLATURE OF PROCESSES AND REFERENCE NUMBERS FOR SYMBOLIC REPRESENTATION ON DRAWINGS
ISO 4063:2009 Welding and allied processes — Nomenclature of processes and reference numbers
EN 571-1:1997 Non destructive testing - Penetrant testing - Part 1: General principles
EN 970:1997 Non-destructive examination of fusion welds - Visual examination
EN 26520 : 1991 CLASSIFICATION OF IMPERFECTIONS IN METALLIC FUSION WELDS, WITH EXPLANATIONS
EN 25817 : 1992 ARC WELDED JOINTS IN STEEL - GUIDANCE ON QUALITY LEVELS FOR IMPERFECTIONS
ISO 6947:2011 Welding and allied processes Welding positions
EN 1320:1996 Destructive tests on welds in metallic materials - Fracture test
EN 287-1:2011 Qualification test of welders - Fusion welding - Part 1: Steels

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.