ISO 17636-1:2013
|
Non-destructive testing of welds — Radiographic testing — Part 1: X- and gamma-ray techniques with film |
EN ISO 15614-5:2004
|
Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 5: Arc welding of titanium, zirconium and their alloys (ISO 15614-5:2004) |
EN 10269:2013
|
Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties |
EN 13480-2:2017
|
Metallic industrial piping - Part 2: Materials |
EN ISO 5817:2014
|
Welding - Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) - Quality levels for imperfections (ISO 5817:2014) |
EN ISO 6506-1:2014
|
Metallic materials - Brinell hardness test - Part 1: Test method (ISO 6506-1:2014) |
ISO 9606-4:1999
|
Approval testing of welders — Fusion welding — Part 4: Nickel and nickel alloys |
ISO 6506-1:2014
|
Metallic materials Brinell hardness test Part 1: Test method |
EN 13789:2010
|
Industrial valves - Cast iron globe valves |
ISO 15614-6:2006
|
Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 6: Arc and gas welding of copper and its alloys |
ASTM E 446 : 2015 : REDLINE
|
Standard Reference Radiographs for Steel Castings Up to 2 in. (50.8 mm) in Thickness |
ASTM E 186 : 2015 : REDLINE
|
Standard Reference Radiographs for Heavy-Walled (2 to 412 in. (50.8 to 114 mm)) Steel Castings |
ISO 9606-2:2004
|
Qualification test of welders — Fusion welding — Part 2: Aluminium and aluminium alloys |
EN ISO 19232-3:2013
|
Non-destructive testing - Image quality of radiographs - Part 3: Image quality classes (ISO 19232-3:2013) |
EN 13445-5 : 2014 COR 2017
|
UNFIRED PRESSURE VESSELS - PART 5: INSPECTION AND TESTING |
EN ISO 3452-1:2013
|
Non-destructive testing - Penetrant testing - Part 1: General principles (ISO 3452-1:2013, Corrected version 2014-05-01) |
EN 10213:2007+A1:2016
|
Steel castings for pressure purposes |
EN ISO 15613:2004
|
Specification and qualification of welding procedures for metallic materials - Qualification based on pre-production welding test (ISO 15613:2004) |
EN 10028-3:2017
|
Flat products made of steels for pressure purposes - Part 3: Weldable fine grain steels, normalized |
ISO 15614-2:2005
|
Specification and qualification of welding procedures for metallic materials Welding procedure test Part 2: Arc welding of aluminium and its alloys |
ISO 17635:2016
|
Non-destructive testing of welds — General rules for metallic materials |
ISO 9712:2012
|
Non-destructive testing Qualification and certification of NDT personnel |
ISO 9606-5:2000
|
Approval testing of welders — Fusion welding — Part 5: Titanium and titanium alloys, zirconium and zirconium alloys |
EN 12680-1:2003
|
Founding - Ultrasonic examination - Part 1: Steel castings for general purposes |
ISO 14732:2013
|
Welding personnel Qualification testing of welding operators and weld setters for mechanized and automatic welding of metallic materials |
EN 12288:2010
|
Industrial valves - Copper alloy gate valves |
EN 13547:2013
|
Industrial valves - Copper alloy ball valves |
EN 764-1:2015+A1:2016
|
Pressure equipment - Part 1: Vocabulary |
EN 1983:2013
|
Industrial valves - Steel ball valves |
EN 12266-2:2012
|
Industrial valves - Testing of metallic valves - Part 2: Tests, test procedures and acceptance criteria - Supplementary requirements |
EN 12516-1:2014
|
Industrial valves - Shell design strength - Part 1: Tabulation method for steel valve shells |
EN ISO 9606-4:1999
|
Approval testing of welders - Fusion welding - Part 4: Nickel and nickel alloys (ISO 9606-4:1999) |
EN 13709:2010
|
Industrial valves - Steel globe and globe stop and check valves |
EN 12516-4:2014
|
Industrial valves - Shell design strength - Part 4: Calculation method for valve shells manufactured in metallic materials other than steel |
EN ISO 14732:2013
|
Welding personnel - Qualification testing of welding operators and weld setters for mechanized and automatic welding of metallic materials (ISO 14732:2013) |
EN 10025-1:2004
|
Hot rolled products of structural steels - Part 1: General technical delivery conditions |
EN 16767:2016
|
Industrial valves - Steel and cast iron check valves |
ISO 5579:2013
|
Non-destructive testing — Radiographic testing of metallic materials using film and X- or gamma rays — Basic rules |
EN 10028-2:2017
|
Flat products made of steels for pressure purposes - Part 2: Non-alloy and alloy steels with specified elevated temperature properties |
EN ISO 9712:2012
|
Non-destructive testing - Qualification and certification of NDT personnel (ISO 9712:2012) |
EN 12449:2016
|
Copper and copper alloys - Seamless, round tubes for general purposes |
EN 10028-7:2016
|
Flat products made of steels for pressure purposes - Part 7: Stainless steels |
ISO 5817:2014
|
Welding — Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) — Quality levels for imperfections |
ISO 3452-1:2013
|
Non-destructive testing Penetrant testing Part 1: General principles |
ISO 16810:2012
|
Non-destructive testing — Ultrasonic testing — General principles |
EN ISO 9934-1:2016
|
Non-destructive testing - Magnetic particle testing - Part 1: General principles (ISO 9934-1:2016) |
EN 12266-1:2012
|
Industrial valves - Testing of metallic valves - Part 1: Pressure tests, test procedures and acceptance criteria - Mandatory requirements |
EN ISO 11970:2016
|
Specification and qualification of welding procedures for production welding of steel castings (ISO 11970:2016) |
EN ISO 19232-1:2013
|
Non-destructive testing - Image quality of radiographs - Part 1: Determination of the image quality value using wire-type image quality indicators (ISO 19232-1:2013) |
ISO 15614-1:2017
|
Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys |
EN ISO 16810:2014
|
Non-destructive testing - Ultrasonic testing - General principles (ISO 16810:2012) |
EN 13445-4 : 2014 COR 2017
|
UNFIRED PRESSURE VESSELS - PART 4: FABRICATION |
EN 764-7:2002/AC:2006
|
PRESSURE EQUIPMENT - PART 7: SAFETY SYSTEMS FOR UNFIRED PRESSURE EQUIPMENT |
ISO 15609-1:2004
|
Specification and qualification of welding procedures for metallic materials Welding procedure specification Part 1: Arc welding |
EN ISO 15614-6:2006
|
Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 6: Arc and gas welding of copper and its alloys (ISO 15614-6:2006) |
EN ISO 5579:2013
|
Non-destructive testing - Radiographic testing of metallic materials using film and X- or gamma rays - Basic rules (ISO 5579:2013) |
EN 1370:2011
|
Founding - Examination of surface condition |
ISO 19232-3:2013
|
Non-destructive testing — Image quality of radiographs — Part 3: Image quality classes |
EN 10222-5:2017
|
Steel forgings for pressure purposes - Part 5: Martensitic, austenitic and austenitic-ferritic stainless steels |
ISO 11970:2016
|
Specification and qualification of welding procedures for production welding of steel castings |
EN 1559-2:2014
|
Founding - Technical conditions of delivery - Part 2: Additional requirements for steel castings |
EN 12516-3:2002/AC:2003
|
VALVES - SHELL DESIGN STRENGTH - PART 3: EXPERIMENTAL METHOD |
EN ISO 15614-2:2005
|
Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 2: Arc welding of aluminium and its alloys (ISO 15614-2:2005) |
EN 1371-1:2011
|
Founding - Liquid penetrant testing- Part 1: Sand, gravity die and low pressure die castings |
EN 593:2017
|
Industrial valves - Metallic butterfly valves for general purposes |
ISO 15614-5:2004
|
Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 5: Arc welding of titanium, zirconium and their alloys |
EN ISO 17635:2016
|
Non-destructive testing of welds - General rules for metallic materials (ISO 17635:2016) |
ISO 3651-2:1998
|
Determination of resistance to intergranular corrosion of stainless steels — Part 2: Ferritic,austenitic and ferritic-austenitic (duplex) stainless steels — Corrosion test in media containing sulfuric acid |
EN ISO 9606-2:2004
|
Qualification test of welders - Fusion welding - Part 2: Aluminium and aluminium alloys (ISO 9606-2:2004) |
EN 1559-1:2011
|
Founding - Technical conditions of delivery - Part 1: General |
EN 1371-2:2015
|
Founding - Liquid penetrant testing - Part 2: Investment castings |
EN 10222-4:2017
|
Steel forgings for pressure purposes - Part 4: Weldable fine grain steels with high proof strength |
ISO 9934-1:2016
|
Non-destructive testing — Magnetic particle testing — Part 1: General principles |
EN 10222-2:2017
|
Steel forgings for pressure purposes - Part 2: Ferritic and martensitic steels with specified elevated temperatures properties |
EN 10025-2:2004/AC:2005
|
HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON-ALLOY STRUCTURAL STEELS |
EN ISO 3651-2 : 1998
|
DETERMINATION OF RESISTANCE TO INTERGRANULAR CORROSION OF STAINLESS STEELS - FERRITIC, AUSTENITIC AND FERRITIC-AUSTENITIC (DUPLEX) STAINLESS STEELS - CORROSION TEST IN MEDIA CONTAINING SULFURIC ACID |
EN ISO 15609-1:2004
|
Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 1: Arc welding (ISO 15609-1:2004) |
EN 12164:2016
|
Copper and copper alloys - Rod for free machining purposes |
EN 13480-8:2017
|
Metallic industrial piping - Part 8: Additional requirements for aluminium and aluminium alloy piping |
EN 1369:2012
|
Founding - Magnetic particle testing |
ISO 19232-1:2013
|
Non-destructive testing — Image quality of radiographs — Part 1: Determination of the image quality value using wire-type image quality indicators |
EN 1984:2010
|
Industrial valves - Steel gate valves |
EN 12681 : 2003
|
FOUNDING - RADIOGRAPHIC EXAMINATION |
EN 13018:2016
|
NON-DESTRUCTIVE TESTING - VISUAL TESTING - GENERAL PRINCIPLES |
EN ISO 9606-5:2000
|
Approval testing of welders - Fusion welding - Part 5: Titanium and titanium alloys, zirconium and zirconium alloys (ISO 9606-5:2000) |
EN 12420:2014
|
Copper and copper alloys - Forgings |
EN 1171:2015
|
Industrial valves - Cast iron gate valves |
ISO 15613:2004
|
Specification and qualification of welding procedures for metallic materials Qualification based on pre-production welding test |
EN 12516-2:2014
|
Industrial valves - Shell design strength - Part 2: Calculation method for steel valve shells |
EN ISO 17636-1:2013
|
Non-destructive testing of welds - Radiographic testing - Part 1: X- and gamma-ray techniques with film (ISO 17636-1:2013) |
EN ISO 9606-1:2017
|
Qualification testing of welders - Fusion welding - Part 1: Steels (ISO 9606-1:2012 including Cor 1:2012 and Cor 2:2013) |
EN 13480-5:2017
|
Metallic industrial piping - Part 5: Inspection and testing |
EN 10028-4:2017
|
Flat products made of steels for pressure purposes - Part 4: Nickel alloy steels with specified low temperature properties |
EN 19:2016
|
Industrial valves - Marking of metallic valves |
EN 1982:2017
|
Copper and copper alloys - Ingots and castings |
ISO 4992-1:2006
|
Steel castings Ultrasonic examination Part 1: Steel castings for general purposes |
EN 12163:2016
|
Copper and copper alloys - Rod for general purposes |
EN 1561:2011
|
Founding - Grey cast irons |
EN ISO 9606-3 : 1999
|
Approval testing of welders - Fusion welding - Part 3: Copper and copper alloys (ISO 9606-3:1999) |
EN 13397:2001
|
Industrial valves - Diaphragm valves made of metallic materials |
ISO 9606-3:1999
|
Approval testing of welders — Fusion welding — Part 3: Copper and copper alloys |