|
ISO 17672:2016
|
Brazing Filler metals |
|
ISO 17636-1:2013
|
Non-destructive testing of welds — Radiographic testing — Part 1: X- and gamma-ray techniques with film |
|
EN 1555-1:2010
|
PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - POLYETHYLENE (PE) - PART 1: GENERAL |
|
EN ISO 14021:2016
|
ENVIRONMENTAL LABELS AND DECLARATIONS - SELF-DECLARED ENVIRONMENTAL CLAIMS (TYPE 2 ENVIRONMENTAL LABELLING) (ISO 14021:2016) |
|
EN ISO 5817:2014
|
WELDING - FUSION-WELDED JOINTS IN STEEL, NICKEL, TITANIUM AND THEIR ALLOYS (BEAM WELDING EXCLUDED) - QUALITY LEVELS FOR IMPERFECTIONS (ISO 5817:2014) |
|
EN 751-3:1996/AC:1997
|
Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water - Part 3: Unsintered PTFE tapes |
|
EN 15001-1 : 2009
|
GAS INFRASTRUCTURE - GAS INSTALLATION PIPEWORK WITH AN OPERATING PRESSURE GREATER THAN 0,5 BAR FOR INDUSTRIAL INSTALLATIONS AND GREATER THAN 5 BAR FOR INDUSTRIAL AND NON-INDUSTRIAL INSTALLATIONS - PART 1: DETAILED FUNCTIONAL REQUIREMENTS FOR DESIGN, MATERIALS, CONSTRUCTION, INSPECTION AND TESTING |
|
EN 1555-3:2010+A1:2012
|
PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - POLYETHYLENE (PE) - PART 3: FITTINGS |
|
EN 1045 : 1997
|
BRAZING - FLUXES FOR BRAZING - CLASSIFICATION AND TECHNICAL DELIVERY CONDITIONS |
|
EN 1515-1 : 1999
|
FLANGES AND THEIR JOINTS - BOLTING - PART 1: SELECTION OF BOLTING |
|
EN 13175:2014
|
LPG EQUIPMENT AND ACCESSORIES - SPECIFICATION AND TESTING FOR LIQUEFIED PETROLEUM GAS (LPG) PRESSURE VESSEL VALVES AND FITTINGS |
|
EN 12007-3:2015
|
GAS INFRASTRUCTURE - PIPELINES FOR MAXIMUM OPERATING PRESSURE UP TO AND INCLUDING 16 BAR - PART 3: SPECIFIC FUNCTIONAL REQUIREMENTS FOR STEEL |
|
EN 10226-2 : 2005
|
PIPE THREADS WHERE PRESSURE TIGHT JOINTS ARE MADE ON THE THREADS - PART 2: TAPER EXTERNAL THREADS AND TAPER INTERNAL THREADS - DIMENSIONS, TOLERANCES AND DESIGNATION |
|
EN ISO 3452-1:2013
|
NON-DESTRUCTIVE TESTING - PENETRANT TESTING - PART 1: GENERAL PRINCIPLES (ISO 3452-1:2013, CORRECTED VERSION 2014-05-01) |
|
EN 10216-5:2013
|
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes |
|
EN 1254-5:1998
|
COPPER AND COPPER ALLOYS - PLUMBING FITTINGS - PART 5: FITTINGS WITH SHORT ENDS FOR CAPILLARY BRAZING TO COPPER TUBES |
|
ISO 9712:2012
|
Non-destructive testing Qualification and certification of NDT personnel |
|
EN ISO 17672:2016 (edition 2)
|
Brazing - Filler metals (ISO 17672:2016) |
|
EN 1057:2006+A1:2010
|
Copper and copper alloys - Seamless, round copper tubes for water and gas in sanitary and heating applications |
|
ISO 9454-2:1998
|
Soft soldering fluxes Classification and requirements Part 2: Performance requirements |
|
EN 1254-1:1998
|
COPPER AND COPPER ALLOYS - PLUMBING FITTINGS - PART 1: FITTINGS WITH ENDS FOR CAPILLARY SOLDERING OR CAPILLARY BRAZING TO COPPER TUBES |
|
EN 12007-1:2012
|
GAS INFRASTRUCTURE - PIPELINES FOR MAXIMUM OPERATING PRESSURE UP TO AND INCLUDING 16 BAR - PART 1: GENERAL FUNCTIONAL REQUIREMENTS |
|
EN 1254-2 : 1998
|
COPPER AND COPPER ALLOYS - PLUMBING FITTINGS - PART 2: FITTINGS WITH COMPRESSION ENDS FOR USE WITH COPPER TUBES |
|
ISO 14024:1999
|
Environmental labels and declarations Type I environmental labelling Principles and procedures |
|
EN 13463-1:2009
|
Non-electrical equipment for use in potentially explosive atmospheres - Part 1: Basic method and requirements |
|
ISO 14021:2016
|
Environmental labels and declarations Self-declared environmental claims (Type II environmental labelling) |
|
EN 751-2:1996
|
Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water - Part 2: Non-hardening jointing compounds |
|
EN 10217-4:2002/A1:2005
|
WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 4: ELECTRIC WELDED NON-ALLOY STEEL TUBES WITH SPECIFIED LOW TEMPERATURE PROPERTIES |
|
ASME B31.3:2016
|
PROCESS PIPING |
|
EN 12266-2:2012
|
Industrial valves - Testing of metallic valves - Part 2: Tests, test procedures and acceptance criteria - Supplementary requirements |
|
ISO 9606-1:2012
|
Qualification testing of welders Fusion welding Part 1: Steels |
|
ISO 3183:2012
|
Petroleum and natural gas industries Steel pipe for pipeline transportation systems |
|
ASME B31.4 : 2016
|
PIPELINE TRANSPORTATION SYSTEMS FOR LIQUIDS AND SLURRIES |
|
EN ISO 9454-2 : 2000
|
SOFT SOLDERING FLUXES - CLASSIFICATION AND REQUIREMENTS - PART 2: PERFORMANCE REQUIREMENTS |
|
EN 10216-2:2013
|
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties |
|
EN ISO 9712:2012
|
NON-DESTRUCTIVE TESTING - QUALIFICATION AND CERTIFICATION OF NDT PERSONNEL (ISO 9712:2012) |
|
ISO 17640:2017
|
Non-destructive testing of welds Ultrasonic testing Techniques, testing levels, and assessment |
|
ISO 5817:2014
|
Welding Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) Quality levels for imperfections |
|
ISO 3452-1:2013
|
Non-destructive testing Penetrant testing Part 1: General principles |
|
ISO 16810:2012
|
Non-destructive testing — Ultrasonic testing — General principles |
|
EN 12266-1:2012
|
Industrial valves - Testing of metallic valves - Part 1: Pressure tests, test procedures and acceptance criteria - Mandatory requirements |
|
EN 10217-7:2014
|
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes |
|
EN ISO 16810 : 2014
|
NON-DESTRUCTIVE TESTING - ULTRASONIC TESTING - GENERAL PRINCIPLES (ISO 16810:2012) |
|
ISO 11922-1:1997
|
Thermoplastics pipes for the conveyance of fluids Dimensions and tolerances Part 1: Metric series |
|
EN ISO 10380:2012
|
PIPEWORK - CORRUGATED METAL HOSES AND HOSE ASSEMBLIES (ISO 10380:2012) |
|
ISO 10380:2012
|
Pipework — Corrugated metal hoses and hose assemblies |
|
EN ISO 17637:2016
|
NON-DESTRUCTIVE TESTING OF WELDS - VISUAL TESTING OF FUSION-WELDED JOINTS (ISO 17637:2016) |
|
EN ISO 17292:2015
|
METAL BALL VALVES FOR PETROLEUM, PETROCHEMICAL AND ALLIED INDUSTRIES (ISO 17292:2015) |
|
EN ISO 14025 : 2010
|
ENVIRONMENTAL LABELS AND DECLARATIONS - TYPE 3 ENVIRONMENTAL DECLARATIONS - PRINCIPLES AND PROCEDURES (ISO 14025:2006) |
|
ISO/IEC 17020:2012
|
Conformity assessment — Requirements for the operation of various types of bodies performing inspection |
|
EN 10217-2:2002/A1:2005
|
WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: ELECTRIC WELDED NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES |
|
EN 1555-4:2011
|
PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - POLYETHYLENE (PE) - PART 4: VALVES |
|
ISO 14001:2015
|
Environmental management systems Requirements with guidance for use |
|
EN ISO 10497:2010
|
TESTING OF VALVES - FIRE TYPE-TESTING REQUIREMENTS (ISO 10497:2010) |
|
EN 12068:1998
|
Cold-rolled flat products made of high yield strength micro-alloyed steels for cold forming - General delivery conditions |
|
ISO 17637:2016
|
Non-destructive testing of welds Visual testing of fusion-welded joints |
|
EN 751-1:1996
|
Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water - Part 1: Anaerobic jointing compounds |
|
EN 14324:2004
|
Brazing - Guidance on the application of brazed joints |
|
EN 1555-5 : 2010
|
PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - POLYETHYLENE (PE) - PART 5: FITNESS FOR PURPOSE OF THE SYSTEM |
|
ASME B16.5 : 2017
|
PIPE FLANGES AND FLANGED FITTINGS: NPS 1/2 THROUGH NPS 24 METRIC/INCH STANDARD |
|
EN 1555-2 : 2010
|
PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - POLYETHYLENE (PE) - PART 2: PIPES |
|
EN 10217-3:2002/A1:2005
|
WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 3: ALLOY FINE GRAIN STEEL TUBES |
|
ISO 14025:2006
|
Environmental labels and declarations Type III environmental declarations Principles and procedures |
|
ISO 10497:2010
|
Testing of valves — Fire type-testing requirements |
|
EN 10216-1:2013
|
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties |
|
EN 10216-4:2013
|
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 4: Non-alloy and alloy steel tubes with specified low temperature properties |
|
EN 549:1994
|
RUBBER MATERIALS FOR SEALS AND DIAPHRAGMS FOR GAS APPLIANCES AND GAS EQUIPMENT |
|
EN 14291:2004
|
Foam producing solutions for leak detection on gas installations |
|
EN ISO 17636-1:2013
|
Non-destructive testing of welds - Radiographic testing - Part 1: X- and gamma-ray techniques with film (ISO 17636-1:2013) |
|
EN ISO 9606-1:2017
|
Qualification testing of welders - Fusion welding - Part 1: Steels (ISO 9606-1:2012 including Cor 1:2012 and Cor 2:2013) |
|
EN ISO 17638:2016
|
NON-DESTRUCTIVE TESTING OF WELDS - MAGNETIC PARTICLE TESTING (ISO 17638:2016) |
|
EN 10226-1 : 2004
|
PIPE THREADS WHERE PRESSURE TIGHT JOINTS ARE MADE ON THE THREADS - PART 1: TAPER EXTERNAL THREADS AND PARALLEL INTERNAL THREADS - DIMENSIONS, TOLERANCES AND DESIGNATION |
|
EN 12799:2000/A1:2003
|
BRAZING - NON-DESTRUCTIVE EXAMINATION OF BRAZED JOINTS |
|
ISO 17638:2016
|
Non-destructive testing of welds Magnetic particle testing |
|
EN 10253-2:2007
|
BUTT-WELDING PIPE FITTINGS - PART 2: NON ALLOY AND FERRITIC ALLOY STEELS WITH SPECIFIC INSPECTION REQUIREMENTS |
|
EN 12542:2010
|
LPG equipment and accessories - Static welded steel cylindrical tanks, serially produced for the storage of Liquefied Petroleum Gas (LPG) having a volume not greater than 13 m³ - Design and manufacture |
|
EN 10217-1:2002/A1:2005
|
WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - NON-ALLOY STEEL TUBES WITH SPECIFIED ROOM TEMPERATURE PROPERTIES |
|
EN 10217-6:2002/A1:2005
|
WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 6: SUBMERGED ARC WELDED NON-ALLOY STEEL TUBES WITH SPECIFIED LOW TEMPERATURE PROPERTIES |
|
EN ISO/IEC 17020:2012
|
CONFORMITY ASSESSMENT - REQUIREMENTS FOR THE OPERATION OF VARIOUS TYPES OF BODIES PERFORMING INSPECTION (ISO/IEC 17020:2012) |
|
EN 10216-3:2013
|
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes |
|
EN 10088-1:2014
|
STAINLESS STEELS - PART 1: LIST OF STAINLESS STEELS |