ES 201 187 : 1.1.1
Current
The latest, up-to-date edition.
2-WIRE ANALOGUE VOICE BAND INTERFACES - LOOP DISCONNECT (LD) DIALLING SPECIFIC REQUIREMENTS
Hardcopy , PDF
English
Intellectual Property Rights
Foreword
Introduction
1 Scope
2 References
3 Definitions and abbreviations
3.1 Definitions
3.2 Abbreviations
4 Technical requirements
4.1 General
4.2 Signalling
Annex A (normative): Test and measuring methods
A.1 Measurement principle
History
This ETSI Standard (ES) specifies the technical characteristics (electrical interface requirements) to be provided by Terminal Equipment (TE) to be connected to a 2-wire analogue interface of the PSTN at which network addressing is intended to be performed by means of loop disconnect signalling, insofar as they are particular to the loop disconnect signalling function. Reference document: prTBR21.
Committee |
ATA
|
DocumentType |
Standard
|
Pages |
12
|
PublisherName |
European Telecommunications Standards Institute
|
Status |
Current
|
ES 203 021-3 : 2.1.2 | ACCESS AND TERMINALS (AT); HARMONIZED BASIC ATTACHMENT REQUIREMENTS FOR TERMINALS FOR CONNECTION TO ANALOGUE INTERFACES OF THE TELEPHONE NETWORKS; UPDATE OF THE TECHNICAL CONTENTS OF TBR 021, EN 301 437, TBR 015, TBR 017; PART 3: BASIC INTERWORKING WITH THE PUBLIC TELEPHONE NETWORKS |
EG 201 973-2 : 1.2.1 | ACCESS AND TERMINALS (AT); PUBLIC SWITCHED TELEPHONE NETWORK; SUPPORT OF LEGACY TERMINALS BY BROADBAND IP NETWORKS AND EQUIPMENT; PART 2: ANALOGUE PSTN TERMINALS |
TS 101 952-2-1 : 1.1.1 | ACCESS NETWORK XDSL TRANSMISSION FILTERS; PART 2: VDSL SPLITTERS FOR EUROPEAN DEPLOYMENT; SUB-PART 1: SPECIFICATION OF THE LOW PASS PART OF VDSL/POTS SPLITTERS |
TS 101 952-1-1 : 1.2.1 | ACCESS NETWORK XDSL TRANSMISSION FILTERS; PART 1: ADSL SPLITTERS FOR EUROPEAN DEPLOYMENT; SUB-PART 1: GENERIC SPECIFICATION OF THE LOW PASS PART OF DSL OVER POTS SPLITTERS INCLUDING DEDICATED ANNEXES FOR SPECIFIC XDSL VARIANTS |
EG 201 188 : 1.2.1 | PUBLIC SWITCHED TELEPHONE NETWORK (PSTN) - NETWORK TERMINATION POINT (NTP) ANALOGUE INTERFACE - SPECIFICATION OF PHYSICAL AND ELECTRICAL CHARACTERISTICS AT A 2-WIRE ANALOGUE PRESENTED NTP FOR SHORT TO MEDIUM LENGTH LOOP APPLICATIONS |
EG 201 185 : 1.1.1 | TERMINAL SUPPORT INTERFACE FOR HARMONIZED ANALOGUE PSTN TERMINALS |
TR 101 844 : 1.1.1 | ACCESS AND TERMINALS (AT); STUDY OF THE GLOBAL USAGE AND ACCEPTANCE OF NON-RADIO TBRS AND ASSOCIATED DOCUMENTS |
CEI 305-1 : 1999 | APPROVAL OF TELECOMMUNICATIONS TERMINAL EQUIPMENT TO BE CONNECTED TO THE PSTN IN ITALY - TECHNICAL GUIDE |
TS 102 971 : 1.1.1 | ACCESS AND TERMINALS (AT); PUBLIC SWITCHED TELEPHONE NETWORK (PSTN); HARMONIZED SPECIFICATION OF PHYSICAL AND ELECTRICAL CHARACTERISTICS OF A 2-WIRE ANALOGUE INTERFACE FOR SHORT LINE INTERFACE |
ES 202 913 : 1.2.2 | ACCESS AND TERMINALS (AT); POTS REQUIREMENTS APPLICABLE TO ADSL MODEMS WHEN CONNECTED TO AN ANALOGUE PRESENTED PSTN LINE |
CEI 303-13 : 2000 | TELEPHONE TERMINALS, SPECIAL TELEPHONE TERMINALS AND RELATED AUXILIARY DEVICES |
TS 101 909-18 : 1.3.1 | DIGITAL BROADBAND CABLE ACCESS TO THE PUBLIC TELECOMMUNICATIONS NETWORK; IP MULTIMEDIA TIME CRITICAL SERVICES; PART 18: EMBEDDED MEDIA TERMINAL ADAPTER (E-MTA) OFFERING AN INTERFACE TO ANALOGUE TERMINALS AND CABLE MODEM |
TS 101 952-1 : 1.1.1 | ACCESS NETWORK XDSL SPLITTERS FOR EUROPEAN DEPLOYMENT; PART 1: GENERIC SPECIFICATION OF XDSL OVER POTS SPLITTERS |
ES 202 971 : 1.2.1 | ACCESS AND TERMINALS (AT); PUBLIC SWITCHED TELEPHONE NETWORK (PSTN); HARMONIZED SPECIFICATION OF PHYSICAL AND ELECTRICAL CHARACTERISTICS OF A 2-WIRE ANALOGUE INTERFACE FOR SHORT LINE INTERFACE |
ES 201 970 : 1.1.1 | ACCESS AND TERMINALS (AT); PUBLIC SWITCHED TELEPHONE NETWORK (PSTN); HARMONIZED SPECIFICATION OF PHYSICAL AND ELECTRICAL CHARACTERISTICS AT A 2-WIRE ANALOGUE PRESENTED NETWORK TERMINATION POINT (NTP) |
TS 101 952-4 : 1.1.1 | ACCESS, TERMINALS, TRANSMISSION AND MULTIPLEXING (ATTM); ACCESS NETWORK XDSL SPLITTERS FOR EUROPEAN DEPLOYMENT; PART 4: SPECIFICATION FOR DYNAMIC DISTRIBUTED FILTERS FOR XDSL OVER POTS |
TS 101 952-3 : 1.1.1 | ACCESS, TERMINALS, TRANSMISSION AND MULTIPLEXING (ATTM); ACCESS NETWORK XDSL SPLITTERS FOR EUROPEAN DEPLOYMENT; PART 3: GENERIC SPECIFICATION OF STATIC DISTRIBUTED FILTERS FOR XDSL OVER POTS |
TS 101 952-1-5 : 1.2.1 | ACCESS NETWORK XDSL TRANSMISSION FILTERS; PART 1: ADSL SPLITTERS FOR EUROPEAN DEPLOYMENT; SUB-PART 5: SPECIFICATION FOR ADSL OVER POTS DISTRIBUTED FILTERS |
TR 101 973-2 : 1.1.1 | ACCESS AND TERMINALS (AT); PUBLIC SWITCHED TELEPHONE NETWORK; SUPPORT OF LEGACY TERMINALS BY BROADBAND IP EQUIPMENT; LISTING OF THE MOST RELEVANT FEATURES AND FUNCTIONALITIES; PART 2: ANALOGUE PSTN TERMINALS |
TS 103 021-3 : 1.1.2 | ACCESS AND TERMINALS (AT); HARMONIZED BASIC ATTACHMENT REQUIREMENTS FOR TERMINALS FOR CONNECTION TO ANALOGUE INTERFACES OF THE TELEPHONE NETWORKS; UPDATE OF THE TECHNICAL CONTENTS OF TBR 021, EN 301 437, TBR 15, TBR 17; PART 3: BASIC INTERWORKING WITH THE PUBLIC TELEPHONE NETWORK |
TR 101 728 : 1.2.1 | ACCESS AND TERMINALS; STUDY FOR THE SPECIFICATION OF THE LOW PASS SECTION OF POTS/ADSL SPLITTERS |
TBR 021 : 20001 | TERMINAL EQUIPMENT (TE); ATTACHMENT REQUIREMENTS FOR PAN-EUROPEAN APPROVAL FOR CONNECTION TO THE ANALOGUE PUBLIC SWITCHED TELEPHONE NETWORKS (PSTNS) OF TE (EXCLUDING TE SUPPORTING THE VOICE TELEPHONY SERVICE) IN WHICH NETWORK ADDRESSING, IF PROVIDED, IS BY MEANS OF DUAL TONE MULTI FREQUENCY (DTMF) SIGNALLING |
EG 201 120 : 1.1.1 | PUBLIC SWITCHED TELEPHONE NETWORK (PSTN); METHOD OF RATING TERMINAL EQUIPMENT SO THAT IT CAN BE CONNECTED IN SERIES AND/OR IN PARALLEL TO A NETWORK TERMINATION POINT (NTP) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.