I.S. 328:2015/AC1:2015
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
GAS TRANSMISSION PIPELINES AND PIPELINE INSTALLATIONS (EDITION 4)
Hardcopy , PDF
02-07-2021
English
21-10-2015
DECLARATION
Foreword
Schedule
1 Scope
2 References
3 Definitions
4 European standards
5 Materials
6 Design
7 Welding
8 Construction
9 Testing
10 Commissioning
11 Protection against corrosion
12 Operation and maintenance
PART 2 - PIPELINE INSTALLATIONS
13 Site selection, layout, housing and security
14 Materials and equipment
15 Design
16 Electrical
17 Testing
18 Operation, maintenance and inspection
Bibliography
Pertains to the design, construction, inspection, testing, operation, maintenance and decommissioning of steel pipelines for the transmission of processed, non-toxic and non-corrosive 1st and 2nd family gases as defined in I.S. EN ISO 13686 [1] i.e. natural gas and substitute natural gas, at maximum operating pressures over 16 bar and temperatures between -25 degrees C and + 120 degrees C.
Committee |
TC 5
|
DocumentType |
Standard
|
Pages |
101
|
PublisherName |
National Standards Authority of Ireland
|
Status |
Withdrawn
|
SupersededBy | |
Supersedes |
I.S. EN 10274:1999 | METALLIC MATERIALS - DROP WEIGHT TEAR TEST |
I.S. EN 10222-3:2017 | STEEL FORGINGS FOR PRESSURE PURPOSES - PART 3: NICKEL STEELS WITH SPECIFIED LOW TEMPERATURE PROPERTIES |
I.S. 329:2015 | GAS DISTRIBUTION MAINS (EDITION 3) |
I.S. EN 13942:2009 | PETROLEUM AND NATURAL GAS INDUSTRIES - PIPELINE TRANSPORTATION SYSTEMS - PIPELINE VALVES |
I.S. EN ISO 15614-14:2013 | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 14: LASER-ARC HYBRID WELDING OF STEELS, NICKEL AND NICKEL ALLOYS (ISO 15614-14:2013) |
I.S. EN 13445-1:2014 | UNFIRED PRESSURE VESSELS - PART 1: GENERAL |
I.S. EN ISO 17637:2016 | NON-DESTRUCTIVE TESTING OF WELDS - VISUAL TESTING OF FUSION-WELDED JOINTS (ISO 17637:2016) |
I.S. EN 10222-1:2017 | STEEL FORGINGS FOR PRESSURE PURPOSES - PART 1: GENERAL REQUIREMENTS FOR OPEN DIE FORGINGS |
I.S. EN ISO 15614-1:2004 | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 1: ARC AND GAS WELDING OF STEELS AND ARC WELDING OF NICKEL AND NICKEL ALLOYS (ISO 15614-1:2017, CORRECTED VERSION 2017-10-01) |
I.S. EN 60079-0:2012 | EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS (IEC 60079-0:2011 (MOD)) |
I.S. EN ISO 9000:2015 | QUALITY MANAGEMENT SYSTEMS - FUNDAMENTALS AND VOCABULARY (ISO 9000:2015) |
I.S. EN 10213:2007 | STEEL CASTINGS FOR PRESSURE PURPOSES |
I.S. EN 1776:2015 | GAS INFRASTRUCTURE - GAS MEASURING SYSTEMS - FUNCTIONAL REQUIREMENTS |
API 5L3 : 2014 | DROP-WEIGHT TEAR TESTS ON LINE PIPE |
I.S. EN 15280:2013 | EVALUATION OF A.C. CORROSION LIKELIHOOD OF BURIED PIPELINES APPLICABLE TO CATHODICALLY PROTECTED PIPELINES |
BS 1640-3:1968 | Specification for steel butt-welding pipe fittings for the petroleum industry Wrought carbon and ferritic alloy steel fittings. Metric units |
I.S. EN 12327:2012 | GAS INFRASTRUCTURE - PRESSURE TESTING, COMMISSIONING AND DECOMMISSIONING PROCEDURES - FUNCTIONAL REQUIREMENTS |
I.S. EN 13445-2:2014 | UNFIRED PRESSURE VESSELS - PART 2: MATERIALS |
I.S. EN ISO 6892-1:2016 | METALLIC MATERIALS - TENSILE TESTING - PART 1: METHOD OF TEST AT ROOM TEMPERATURE (ISO 6892-1:2016) |
I.S. EN ISO 15614-4:2005 | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 4: FINISHING WELDING OF ALUMINIUM CASTINGS |
I.S. EN ISO 15614-6:2006 | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 6: ARC AND GAS WELDING OF COPPER AND ITS ALLOYS |
I.S. EN 1594:2013 | GAS INFRASTRUCTURE - PIPELINES FOR MAXIMUM OPERATING PRESSURE OVER 16 BAR - FUNCTIONAL REQUIREMENTS |
I.S. EN 12732:2013 | GAS INFRASTRUCTURE - WELDING STEEL PIPEWORK - FUNCTIONAL REQUIREMENTS |
I.S. EN ISO 9606-1:2017 | QUALIFICATION TESTING OF WELDERS - FUSION WELDING - PART 1: STEELS (ISO 9606-1:2012 INCLUDING COR 1:2012 AND COR 2:2013) |
I.S. EN 12560-4:2001 | FLANGES AND THEIR JOINTS - GASKETS FOR CLASS-DESIGNATED FLANGES - PART 4: CORRUGATED, FLAT OR GROOVED METALLIC AND FILLED METALLIC GASKETS FOR USE WITH STEEL FLANGES |
I.S. EN ISO 15614-10:2005 | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 10: HYPERBARIC DRY WELDING |
I.S. EN 10253-2:2007 | BUTT-WELDING PIPE FITTINGS - PART 2: NON ALLOY AND FERRITIC ALLOY STEELS WITH SPECIFIC INSPECTION REQUIREMENTS |
I.S. EN ISO 13686:2013 | NATURAL GAS - QUALITY DESIGNATION (ISO 13686:2013) |
API 5L : 2012 | LINE PIPE |
I.S. EN 13636:2004 | CATHODIC PROTECTION OF BURIED METALLIC TANKS AND RELATED PIPING |
I.S. EN 10222-4:2017 | STEEL FORGINGS FOR PRESSURE PURPOSES - PART 4: WELDABLE FINE GRAIN STEELS WITH HIGH PROOF STRENGTH |
I.S. EN ISO 15614-3:2008 | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 3: FUSION WELDING OF NON-ALLOYED AND LOW-ALLOYED CAST IRONS |
I.S. EN 12560-1:2001 | FLANGES AND THEIR JOINTS - GASKETS FOR CLASS-DESIGNATED FLANGES - PART 1: NON-METALLIC FLAT GASKETS WITH OR WITHOUT INSERTS |
I.S. EN ISO 15614-7:2016 | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 7: OVERLAY WELDING |
I.S. EN 10222-5:2017 | STEEL FORGINGS FOR PRESSURE PURPOSES - PART 5: MARTENSITIC, AUSTENITIC AND AUSTENITIC-FERRITIC STAINLESS STEELS |
I.S. EN ISO 17638:2016 | NON-DESTRUCTIVE TESTING OF WELDS - MAGNETIC PARTICLE TESTING (ISO 17638:2016) |
I.S. EN 12560-3:2001 | FLANGES AND THEIR JOINTS - GASKETS FOR CLASS-DESIGNATED FLANGES - PART 3: NON-METALLIC PTFE ENVELOPE GASKETS |
I.S. EN 12954:2001 | CATHODIC PROTECTION OF BURIED OR IMMERSED METALLIC STRUCTURES - GENERAL PRINCIPLES AND APPLICATION FOR PIPELINES |
I.S. EN 10204:2004 | METALLIC PRODUCTS - TYPES OF INSPECTION DOCUMENTS |
I.S. EN 12560-2:2013 | FLANGES AND THEIR JOINTS - DIMENSIONS OF GASKETS FOR CLASS-DESIGNATED FLANGES - PART 2: SPIRAL WOUND GASKETS FOR USE WITH STEEL FLANGES |
I.S. EN 13445-3:2014 | UNFIRED PRESSURE VESSELS - PART 3: DESIGN |
I.S. EN 1515-3:2005 | FLANGES AND THEIR JOINTS - BOLTING - PART 3: CLASSIFICATION OF BOLT MATERIALS FOR STEEL FLANGES, CLASS DESIGNATED |
I.S. EN ISO 15614-8:2016 | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 8: WELDING OF TUBES TO TUBE-PLATE JOINTS (ISO 15614-8:2016) |
I.S. EN ISO 17636-1:2013 | NON-DESTRUCTIVE TESTING OF WELDS - RADIOGRAPHIC TESTING - PART 1: X- AND GAMMA-RAY TECHNIQUES WITH FILM (ISO 17636-1:2013) |
I.S. EN 15112:2006 | EXTERNAL CATHODIC PROTECTION OF WELL CASINGS |
I.S. EN 13445-6:2014 | UNFIRED PRESSURE VESSELS - PART 6: REQUIREMENTS FOR THE DESIGN AND FABRICATION OF PRESSURE VESSELS AND PRESSURE PARTS CONSTRUCTED FROM SPHEROIDAL GRAPHITE CAST IRON |
API 6D :2015 | SPECIFICATION FOR PIPELINE AND PIPING VALVES |
I.S. EN ISO 16810:2014 | NON-DESTRUCTIVE TESTING - ULTRASONIC TESTING - GENERAL PRINCIPLES (ISO 16810:2012) |
I.S. EN 12186:2014 | GAS INFRASTRUCTURE - GAS PRESSURE REGULATING STATIONS FOR TRANSMISSION AND DISTRIBUTION - FUNCTIONAL REQUIREMENTS |
I.S. EN ISO 15614-11:2002 | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - ELECTRON AND LASER BEAM WELDING |
I.S. EN ISO 3183:2012 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS (ISO 3183:2012) |
I.S. EN 60079-10-1:2015 | EXPLOSIVE ATMOSPHERES - PART 10-1: CLASSIFICATION OF AREAS - EXPLOSIVE GAS ATMOSPHERES |
I.S. EN ISO 15614-13:2012 | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 13: UPSET (RESISTANCE BUTT) AND FLASH WELDING (ISO 15614-13:2012) |
I.S. EN ISO 148-1:2016 | METALLIC MATERIALS - CHARPY PENDULUM IMPACT TEST - PART 1: TEST METHOD (ISO 148-1:2016) |
I.S. EN 1759-1:2005 | FLANGES AND THEIR JOINT - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, CLASS DESIGNATED - PART 1: STEEL FLANGES, NPS 1/2 TO 24 |
I.S. EN 10222-2:2017 | STEEL FORGINGS FOR PRESSURE PURPOSES - PART 2: FERRITIC AND MARTENSITIC STEELS WITH SPECIFIED ELEVATED TEMPERATURES PROPERTIES |
I.S. EN ISO 17640:2010 | NON-DESTRUCTIVE TESTING OF WELDS - ULTRASONIC TESTING - TECHNIQUES, TESTING LEVELS, AND ASSESSMENT (ISO 17640:2017) |
I.S. EN 13445-5:2014 | UNFIRED PRESSURE VESSELS - PART 5: INSPECTION AND TESTING |
I.S. EN ISO 15614-2:2005 | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 2: ARC WELDING OF ALUMINIUM AND ITS ALLOYS |
I.S. EN ISO 15614-12:2014 | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 12: SPOT, SEAM AND PROJECTION WELDING (ISO 15614-12:2014) |
I.S. EN ISO 17636-2:2013 | NON-DESTRUCTIVE TESTING OF WELDS - RADIOGRAPHIC TESTING - PART 2: X- AND GAMMA-RAY TECHNIQUES WITH DIGITAL DETECTORS (ISO 17636-2:2013) |
I.S. EN ISO 15614-5:2004 | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 5: ARC WELDING OF TITANIUM, ZIRCONIUM AND THEIR ALLOYS |
I.S. EN 13445-4:2014 | UNFIRED PRESSURE VESSELS - PART 4: FABRICATION |
1994/9/EC : 1994 | DIRECTIVE 94/9/EC OF THE EUROPEAN PARLIAMENT AND THE COUNCIL OF 23 MARCH 1994 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES CONCERNING EQUIPMENT AND PROTECTIVE SYSTEMS INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.