I.S. EN 12288:2010
Current
The latest, up-to-date edition.
INDUSTRIAL VALVES - COPPER ALLOY GATE VALVES
Hardcopy , PDF
English
01-01-2010
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Dates of withdrawal of national standards are available from NSAI.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Requirements
4.1 Classification
4.2 Design
4.3 Functional characteristics
5 Test procedures
5.1 Production pressure testing
5.2 Applicability of gas tests
5.3 Test durations
6 Declaration of compliance
7 Designation
8 Marking and preparation for storage and transportation
8.1 Required markings
8.2 Preparation for storage and transportation
Annex A (normative) Materials
Annex B (normative) Pressure/temperature ratings
B.1 Valves with metallic body seats and obturator
seats
B.2 Valves with non-metallic obturator seats and/or
body seats
Annex ZA (informative) Relationship between this European
Standard and the Essential Requirements of
EU Directive 97/23/EC
Bibliography
Applicable to copper alloy gate valves for general use having flanged, threaded, capillary, compression or loose nut/union body ends.
| DocumentType |
Standard
|
| Pages |
25
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| NS EN 12288 : 2010 | Identical |
| EN 12288:2010 | Identical |
| NEN EN 12288 : 2010 | Identical |
| BS EN 12288:2010 | Identical |
| NF EN 12288 : 2010 | Identical |
| NBN EN 12288 : 2010 | Identical |
| SN EN 12288 : 2010 | Identical |
| DIN EN 12288:2010-10 | Identical |
| UNI EN 12288 : 2010 | Identical |
| UNE-EN 12288:2010 | Identical |
| EN 12168:2016 | Copper and copper alloys - Hollow rod for free machining purposes |
| EN 1254-3:1998 | Copper and copper alloys - Plumbing fittings - Part 3: Fittings with compression ends for use with plastics pipes |
| ISO 5210:2017 | Industrial valves — Multi-turn valve actuator attachments |
| EN ISO 5210:2017 | Industrial valves - Multi-turn valve actuator attachments (ISO 5210:2017) |
| EN 1057:2006+A1:2010 | Copper and copper alloys - Seamless, round copper tubes for water and gas in sanitary and heating applications |
| EN 1254-1:1998 | Copper and copper alloys - Plumbing fittings - Part 1: Fittings with ends for capillary soldering or capillary brazing to copper tubes |
| EN 1254-2:1998 | Copper and copper alloys - Plumbing fittings - Part 2: Fittings with compression ends for use with copper tubes |
| EN 558:2017 | Industrial valves - Face-to-face and centre-to-face dimensions of metal valves for use in flanged pipe systems - PN and Class designated valves |
| EN 12266-2:2012 | Industrial valves - Testing of metallic valves - Part 2: Tests, test procedures and acceptance criteria - Supplementary requirements |
| EN 12167:2016 | Copper and copper alloys - Profiles and bars for general purposes |
| ISO 6708:1995 | Pipework components Definition and selection of DN (nominal size) |
| EN 736-2:2016 | Valves - Terminology - Part 2: Definition of components of valves |
| EN 12449:2016 | Copper and copper alloys - Seamless, round tubes for general purposes |
| EN ISO 6708:1995 | Pipework components - Definition and selection of DN (nominal size) (ISO 6708:1995) |
| EN ISO 228-1:2003 | Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation (ISO 228-1:2000) |
| EN 12266-1:2012 | Industrial valves - Testing of metallic valves - Part 1: Pressure tests, test procedures and acceptance criteria - Mandatory requirements |
| ASME B1.20.1 : 2013(R2018) | PIPE THREADS, GENERAL PURPOSE (INCH) |
| ISO 7-1:1994 | Pipe threads where pressure-tight joints are made on the threads Part 1: Dimensions, tolerances and designation |
| EN 12570:2000 | Industrial valves - Method for sizing the operating element |
| EN 1333:2006 | Flanges and their joints - Pipework components - Definition and selection of PN |
| EN 12164:2016 | Copper and copper alloys - Rod for free machining purposes |
| EN 12420:2014 | Copper and copper alloys - Forgings |
| EN 19:2016 | Industrial valves - Marking of metallic valves |
| EN 1982:2017 | Copper and copper alloys - Ingots and castings |
| ISO 228-1:2000 | Pipe threads where pressure-tight joints are not made on the threads Part 1: Dimensions, tolerances and designation |
| EN 12163:2016 | Copper and copper alloys - Rod for general purposes |
| EN 736-3:2008 | Valves - Terminology - Part 3: Definition of terms |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.