Skip to content
Please enter a keyword to search

  • EN 1254-2:1998

    View superseded by
    Superseded A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
    View superseded by

    Copper and copper alloys - Plumbing fittings - Part 2: Fittings with compression ends for use with copper tubes

    Available format(s): 

    Superseded date:  05-06-2021

    Language(s): 

    Published date:  21-01-1998

    Publisher:  Comite Europeen de Normalisation

    Pure ENs are not available for sale, please purchase a suitable national adoption

    Sorry this product is not available in your region.

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    Foreword
    1 Scope
    2 Normative references
    3 Definitions
      3.1 plumbing fitting
      3.2 compression end
      3.3 reducer (compression end for copper tube)
      3.4 adaptor fitting
      3.5 nominal diameter
    4 Requirements
      4.1 General
      4.2 Materials
      4.3 Dimensions and tolerances
      4.4 Design and manufacture
      4.5 Production test requirements
      4.6 Type test requirements
    5 Test methods
      5.1 Sampling procedure
      5.2 Preparation of fittings for testing
      5.3 Test sequence
      5.4 Leaktightness under internal hydrostatic pressure
      5.5 Resistance to pull-out
      5.6 Leaktightness under internal hydrostatic pressure
          whilst subjected to bending
      5.7 Pressure test
      5.8 Dezincification resistance test
      5.9 Stress corrosion resistance test
    6 Designation
    7 Marking
      7.1 General
      7.2 Dezincification resistant copper-zinc alloys
    8 Documentation
      8.1 Declaration of conformity
      8.2 User instructions
    Annex A (normative) Determination of mean depth of
                        dezincification
    Annex B (informative) Bibliography

    Abstract - (Show below) - (Hide below)

    This European standard specifies materials, assembly dimensions and tolerances and test requirements for fittings of copper and copper alloys with or without plating or coating. Maximum permissible temperatures and pressures are also established. This part of prEN 1254 specifies connection end dimensions of compression ends for the purposes of joing copper tubes specified in EN 1057. Fittings may comprise a combination of any of the end types specified in prEN 1254-1 to prEN 1254-5 or other standards. The standard establishes a designation system for the fittings.

    General Product Information - (Show below) - (Hide below)

    Committee CEN/TC 133
    Document Type Standard
    Publisher Comite Europeen de Normalisation
    Status Superseded
    Superseded By

    Standards Referenced By This Book - (Show below) - (Hide below)

    BS EN 16146 : 2012 SANITARY TAPWARE - EXTRACTABLE SHOWER HOSES FOR SANITARY TAPWARE FOR SUPPLY SYSTEMS TYPE 1 AND TYPE 2 - GENERAL TECHNICAL SPECIFICATION
    13/30279702 DC : 0 BS EN 331 - MANUALLY OPERATED BALL VALVES AND CLOSED BOTTOM TAPER PLUG VALVES FOR GAS INSTALLATIONS FOR BUILDINGS
    12/30259203 DC : 0 BS EN 12007-5 - GAS INFRASTRUCTURE - PIPELINES FOR MAXIMUM OPERATING PRESSURE UP TO AND INCLUDING 16 BAR - PART 5: SERVICE LINES, SPECIFIC FUNCTIONAL REQUIREMENTS
    10/30227098 DC : 0 BS EN 16125 - LPG EQUIPMENT AND ACCESSORIES - PIPEWORK SYSTEMS AND SUPPORTS - LPG LIQUID PHASE AND VAPOUR PRESSURE PHASE
    03/118276 DC : DRAFT NOV 2003 BS EN 14812-1 - WATER CONDITIONING EQUIPMENT INSIDE BUILDINGS - CHEMICAL DOSING SYSTEMS - REQUIREMENTS FOR PERFORMANCE AND SAFETY TESTING - PART 1: PRE-SET DOSING SYSTEMS
    DIN CEN/TS 13547:2007-02 INDUSTRIAL VALVES - COPPER ALLOY BALL VALVES
    04/30126822 DC : 0 EN 15092 - BUILDING VALVES - INLINE HOT WATER SUPPLY TEMPERING VALVES - TESTS AND REQUIREMENTS
    00/107336 DC : DRAFT OCT 2000 PREN 13959 - ANTI-POLLUTION CHECK VALVES DN 6 TO DN 250 INCLUSIVE - FAMILY E, TYPE A, B, C AND D
    UNE-EN 13547:2014 Industrial valves - Copper alloy ball valves
    DD CEN/TS 13547:2006 Industrial valves. Copper alloy ball valves
    I.S. EN 1254-1:1998 COPPER AND COPPER ALLOYS - PLUMBING FITTINGS - PART 1: FITTINGS WITH ENDS FOR CAPILLARY SOLDERING OR CAPILLARY BRAZING TO COPPER TUBES
    I.S. EN 1254-3:1998 COPPER AND COPPER ALLOYS - PLUMBING FITTINGS - PART 3: FITTINGS WITH COMPRESSION ENDS FOR USE WITH PLASTICS PIPES
    PREN 13618 : DRAFT 2009 FLEXIBLE HOSE ASSEMBLIES IN DRINKING WATER INSTALLATIONS - FUNCTIONAL REQUIREMENTS AND TEST METHODS
    I.S. EN 13547:2013 INDUSTRIAL VALVES - COPPER ALLOY BALL VALVES
    EN 12309-2:2015/AC:2015 GAS-FIRED SORPTION APPLIANCES FOR HEATING AND/OR COOLING WITH A NET HEAT INPUT NOT EXCEEDING 70 KW - PART 2: SAFETY
    DIN EN ISO 23553-1:2014-09 Safety and control devices for oil burners and oil-burning appliances - Particular requirements - Part 1: Automatic and semi-automatic valves (ISO 23553-1:2014); German version EN ISO 23553-1:2014
    DIN EN 1254-1:1998-03 Copper and copper alloy plumbing fittings - Part 1: Fittings with ends for capillary soldering or capillary brazing to copper tubes
    BS EN 1490:2000 Building valves. Combined temperature and pressure relief valves. Tests and requirements
    BS EN 13828:2003 Building valves. Manually operated copper alloy and stainless steel ball valves for potable water supply in buildings. Tests and requirements
    BS EN 817:2008 Sanitary tapware. Mechanical mixing valves (PN 10). General technical specifications
    BS EN 12288:2010 Industrial valves. Copper alloy gate valves
    UNE-EN 331:2016 Manually operated ball valves and closed bottom taper plug valves for gas installations for buildings
    BS EN 1567 : 2000 BUILDING VALVES - WATER PRESSURE REDUCING VALVES AND COMBINATION WATER REDUCING VALVES - REQUIREMENTS AND TESTS
    BS EN 1489:2000 Building valves. Pressure safety valves. Tests and requirements
    I.S. EN 14812:2005 WATER CONDITIONING EQUIPMENT INSIDE BUILDINGS - CHEMICAL DOSING SYSTEMS - PRE-SET DOSING SYSTEMS - REQUIREMENTS FOR PERFORMANCE, SAFETY AND TESTING
    I.S. EN 12288:2010 INDUSTRIAL VALVES - COPPER ALLOY GATE VALVES
    DIN EN 200:2008-10 SANITARY TAPWARE - SINGLE TAPS AND COMBINATION TAPS FOR WATER SUPPLY SYSTEMS OF TYPE 1 AND TYPE 2 - GENERAL TECHNICAL SPECIFICATION
    DIN EN 13828:2003-12 BUILDING VALVES - MANUALLY OPERATED COPPER ALLOY AND STAINLESS STEEL BALL VALVES FOR POTABLE WATER SUPPLY IN BUILDINGS - TESTS AND REQUIREMENTS
    EN 12288:2010 Industrial valves - Copper alloy gate valves
    EN 13443-1:2002+A1:2007 Water conditioning equipment inside buildings - Mechanical filters - Part 1: Particle rating 80 µm to 150 µm - Requirements for performances, safety and testing
    EN 1286:1999 Sanitary tapware - Low pressure mechanical mixing valves - General technical specification
    EN 13547:2013 Industrial valves - Copper alloy ball valves
    UNI EN 1949 : 2013 SPECIFICATION FOR THE INSTALLATION OF LPG SYSTEMS FOR HABITATION PURPOSES IN LEISURE ACCOMMODATION VEHICLES AND ACCOMMODATION PURPOSES IN OTHER VEHICLES
    CEN/TS 13547:2006 Industrial valves - Copper alloy ball valves
    09/30202316 DC : 0 BS EN 12514-4 - PARTS FOR SUPPLY SYSTEMS FOR CONSUMING UNITS WITH LIQUID FUELS - PART 4: SAFETY REQUIREMENTS AND TESTS - PIPINGS AND PARTS WITHIN PIPELINES
    DIN EN 15001-1:2011-02 Gas infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1: Detailed functional requirements for design, materials, construction, inspection and testing
    07/30163621 DC : 0 BS EN 1254-5 - COPPER AND COPPER ALLOYS - PLUMBING FITTINGS - PART 5: FITTINGS WITH SHORT ENDS FOR CAPILLARY BRAZING TO COPPER TUBES
    DIN EN 16145:2013-03 Sanitary tapware - Extractable outlets for sink and basin mixers - General technical specification
    EN 1488:2000 Building valves - Expansion groups - Tests and requirements
    99/707487 DC : DRAFT JUN 1999 PREN 13547 - INDUSTRIAL VALVES - COPPER ALLOY BALL VALVES
    I.S. EN 1254-4:1998 COPPER AND COPPER ALLOYS - PLUMBING FITTINGS - PART 4: FITTINGS COMBINING OTHER END CONNECTIONS WITH CAPILLARY OR COMPRESSION ENDS
    PREN 12309-2 : DRAFT 2013 GAS-FIRED SORPTION APPLIANCES FOR HEATING AND/OR COOLING WITH A NET HEAT INPUT NOT EXCEEDING 70 KW - PART 2: SAFETY
    I.S. EN 16145:2012 SANITARY TAPWARE - EXTRACTABLE OUTLETS FOR SINK AND BASIN MIXERS - GENERAL TECHNICAL SPECIFICATION
    UNI EN 16145 : 2013 SANITARY TAPWARE - EXTRACTABLE OUTLETS FOR SINK AND BASIN MIXERS - GENERAL TECHNICAL SPECIFICATION
    DIN EN 12288:2010-10 Industrial valves - Copper alloy gate valves
    DIN EN 14868:2005-11 PROTECTION OF METALLIC MATERIALS AGAINST CORROSION - GUIDANCE ON THE ASSESSMENT OF CORROSION LIKELIHOOD IN CLOSED WATER CIRCULATION SYSTEMS
    DIN EN 14868 E : 2005 PROTECTION OF METALLIC MATERIALS AGAINST CORROSION - GUIDANCE ON THE ASSESSMENT OF CORROSION LIKELIHOOD IN CLOSED WATER CIRCULATION SYSTEMS
    BS EN 1254-3:1998 Copper and copper alloys. Plumbing fittings Fittings with compression ends for use with plastics pipes
    BS EN 14812 : 2005 WATER CONDITIONING EQUIPMENT INSIDE BUILDINGS - CHEMICAL DOSING SYSTEMS - PRE-SET DOSING SYSTEMS - REQUIREMENTS FOR PERFORMANCE, SAFETY AND TESTING
    BS EN 13443-1:2002 Water conditioning equipment inside buildings. Mechanical filters Particle rating 80 μm to 150 μm. Requirements for performances, safety and testing
    BS EN 1254-4:1998 Copper and copper alloys. Plumbing fittings Fittings combining other end connections with capillary or compression ends
    I.S. EN 1949:2011 SPECIFICATION FOR THE INSTALLATION OF LPG SYSTEMS FOR HABITATION PURPOSES IN LEISURE ACCOMMODATION VEHICLES AND ACCOMMODATION PURPOSES IN OTHER VEHICLES (INCLUDING IRISH NATIONAL ANNEX)
    DIN EN 1775:2007-10 Gas supply - Gas pipework for buildings - Maximum operating pressure less than or equal to 5 bar - Functional recommendations
    I.S. EN 817:2008 SANITARY TAPWARE - MECHANICAL MIXING VALVES (PN 10) - GENERAL TECHNICAL SPECIFICATIONS
    I.S. EN 331:2015 MANUALLY OPERATED BALL VALVES AND CLOSED BOTTOM TAPER PLUG VALVES FOR GAS INSTALLATIONS FOR BUILDINGS
    I.S. EN 200:2008 SANITARY TAPWARE - SINGLE TAPS AND COMBINATION TAPS FOR WATER SUPPLY SYSTEMS OF TYPE 1 AND TYPE 2 - GENERAL TECHNICAL SPECIFICATION
    I.S. EN 12309-2:2015 GAS-FIRED SORPTION APPLIANCES FOR HEATING AND/OR COOLING WITH A NET HEAT INPUT NOT EXCEEDING 70 KW - PART 2: SAFETY
    I.S. EN 13443-1:2002 WATER CONDITIONING EQUIPMENT INSIDE BUILDINGS - MECHANICAL FILTERS - PART 1: PARTICLE RATING 80 MICROMETER TO 150 MICROMETER - REQUIREMENTS FOR PERFORMANCES, SAFETY AND TESTING
    I.S. EN 1775:2007 GAS SUPPLY - GAS PIPEWORK FOR BUILDINGS - MAXIMUM OPERATING PRESSURE LESS THAN OR EQUAL TO 5 BAR - FUNCTIONAL RECOMMENDATIONS
    BS EN 15092:2008 Building valves. Inline hot water supply tempering valves. Tests and requirements
    PREN 13547 : DRAFT 1999 INDUSTRIAL VALVES - COPPER ALLOY BALL VALVES
    07/30163615 DC : 0 BS EN 1254-1 - COPPER AND COPPER ALLOYS - PLUMBING FITTINGS - PART 1: FITTINGS WITH ENDS FOR CAPILLARY SOLDERING OR CAPILLARY BRAZING TO COPPER TUBES
    UNE-EN ISO 10239:2017 Small craft - Liquefied petroleum gas (LPG) systems (ISO 10239:2014)
    I.S. EN 15001-1:2009 GAS INFRASTRUCTURE - GAS INSTALLATION PIPEWORK WITH AN OPERATING PRESSURE GREATER THAN 0,5 BAR FOR INDUSTRIAL INSTALLATIONS AND GREATER THAN 5 BAR FOR INDUSTRIAL AND NON-INDUSTRIAL INSTALLATIONS - PART 1: DETAILED FUNCTIONAL REQUIREMENTS FOR DESIGN, MATERIALS, CONSTRUCTION, INSPECTION AND TESTING
    07/19990369 DC : 0 BS EN 806-4 - SPECIFICATIONS FOR INSTALLATIONS INSIDE BUILDINGS CONVEYING WATER FOR HUMAN CONSUMPTION - PART 4 - INSTALLATION
    BS EN ISO 10239:2017 Small craft. Liquefied petroleum gas (LPG) systems
    I.S. EN 15092:2008 BUILDING VALVES - INLINE HOT WATER SUPPLY TEMPERING VALVES - TESTS AND REQUIREMENTS
    UNI EN 806-4 : 2010 SPECIFICATIONS FOR INSTALLATIONS INSIDE BUILDINGS CONVEYING WATER FOR HUMAN CONSUMPTION - PART 4: INSTALLATION
    BS EN 13618:2016 Flexible hose assemblies in drinking water installations. Functional requirements and test methods
    BS EN 806-4:2010 Specifications for installations inside buildings conveying water for human consumption Installation
    09/30205880 DC : DRAFT OCT 2009 BS EN 12288 - INDUSTRIAL VALVES - COPPER ALLOY GATE VALVES
    EN 1254-3:1998 Copper and copper alloys - Plumbing fittings - Part 3: Fittings with compression ends for use with plastics pipes
    NF EN 15001-1 : 2009 GAS INFRASTRUCTURE - GAS INSTALLATION PIPEWORK WITH AN OPERATING PRESSURE GREATER THAN 0,5 BAR FOR INDUSTRIAL INSTALLATIONS AND GREATER THAN 5 BAR FOR INDUSTRIAL AND NON-INDUSTRIAL INSTALLATIONS - PART 1: DETAILED FUNCTIONAL REQUIREMENTS FOR DESIGN, MATERIALS, CONSTRUCTION, INSPECTION AND TESTING
    07/30144895 DC : 0 BS EN 723 - COPPER AND COPPER ALLOYS - COMBUSTION METHOD FOR DETERMINATION OF CARBON CONTENT ON THE INNER SURFACE OF COPPER TUBES OR FITTINGS
    I.S. EN 1254-5:1998 COPPER AND COPPER ALLOYS - PLUMBING FITTINGS - PART 5: FITTINGS WITH SHORT ENDS FOR CAPILLARY BRAZING TO COPPER TUBES
    NF EN 806-4 : 2010 SPECIFICATIONS FOR INSTALLATIONS INSIDE BUILDINGS CONVEYING WATER FOR HUMAN CONSUMPTION - PART 4: INSTALLATION
    UNI EN 13547 : 2013 INDUSTRIAL VALVES - COPPER ALLOY BALL VALVES
    I.S. CEN TS 13547:2006 INDUSTRIAL VALVES - COPPER ALLOY BALL VALVES
    I.S. EN ISO 10239:2017 SMALL CRAFT - LIQUEFIED PETROLEUM GAS (LPG) SYSTEMS (ISO 10239:2014)
    DIN EN 13443-1:2007-12 WATER CONDITIONING EQUIPMENT INSIDE BUILDINGS - MECHANICAL FILTERS - PART 1: PARTICLE RATING 80 [MU]M TO 150 [MU]M - REQUIREMENTS FOR PERFORMANCES, SAFETY AND TESTING
    DIN EN 1949:2013-05 Specification for the installation of LPG systems for habitation purposes in leisure accommodation vehicles and accommodation purposes in other vehicles (includes Amendment A1:2013)
    DIN EN 817:2008-09 SANITARY TAPWARE - MECHANICAL MIXING VALVES (PN 10) - GENERAL TECHNICAL SPECIFICATIONS
    DIN EN 331:2016-04 MANUALLY OPERATED BALL VALVES AND CLOSED BOTTOM TAPER PLUG VALVES FOR GAS INSTALLATIONS FOR BUILDINGS
    DIN EN 14812 E : 2007 WATER CONDITIONING EQUIPMENT INSIDE BUILDINGS - CHEMICAL DOSING SYSTEMS - PRE-SET DOSING SYSTEMS - REQUIREMENTS FOR PERFORMANCE, SAFETY AND TESTING
    UNE-EN 1949:2011 Specification for the installation of LPG systems for habitation purposes in leisure accommodation vehicles and accommodation purposes in other vehicles
    UNE-EN ISO 23553-1:2014 Safety and control devices for oil burners and oil-burning appliances - Particular requirements - Part 1: Automatic and semi-automatic valves (ISO 23553-1:2014)
    DIN EN 12309-2 E : 2016 GAS-FIRED SORPTION APPLIANCES FOR HEATING AND/OR COOLING WITH A NET HEAT INPUT NOT EXCEEDING 70 KW - PART 2: SAFETY
    UNE-EN 16125:2016 LPG Equipment and Accessories - Pipework systems and supports - LPG in liquid phase and vapour pressure phase
    I.S. EN 1491:2000 BUILDING VALVES - EXPANSION VALVES - TESTS AND REQUIREMENTS
    UNI EN 12288 : 2010 INDUSTRIAL VALVES - COPPER ALLOY GATE VALVES
    UNI EN 15001-1 : 2009 GAS INFRASTRUCTURE - GAS INSTALLATION PIPEWORK WITH AN OPERATING PRESSURE GREATER THAN 0,5 BAR FOR INDUSTRIAL INSTALLATIONS AND GREATER THAN 5 BAR FOR INDUSTRIAL AND NON-INDUSTRIAL INSTALLATIONS - PART 1: DETAILED FUNCTIONAL REQUIREMENTS FOR DESIGN, MATERIALS, CONSTRUCTION, INSPECTION AND TESTING
    UNI EN 1775 : 2007 GAS SUPPLY - GAS PIPEWORK FOR BUILDINGS - MAXIMUM OPERATING PRESSURE LESS THAN OR EQUAL TO 5 BAR - FUNCTIONAL RECOMMENDATIONS
    UNI EN 817 : 2008 SANITARY TAPWARE - MECHANICAL MIXING VALVES (PN 10) - GENERAL TECHNICAL SPECIFICATIONS
    UNI EN ISO 23553-1 : 2014 SAFETY AND CONTROL DEVICES FOR OIL BURNERS AND OIL-BURNING APPLIANCES - PARTICULAR REQUIREMENTS - PART 1: AUTOMATIC AND SEMI-AUTOMATIC VALVES
    UNI EN 200 : 2008 SANITARY TAPWARE - SINGLE TAPS AND COMBINATION TAPS FOR WATER SUPPLY SYSTEMS OF TYPE 1 AND TYPE 2 - GENERAL TECHNICAL SPECIFICATION
    DIN EN 13547:2013-12 INDUSTRIAL VALVES - COPPER ALLOY BALL VALVES
    BS EN 16145:2012 Sanitary tapware. Extractable outlets for sink and basin mixers. General technical specification
    BS EN 13547:2013 Industrial valves. Copper alloy ball valves
    I.S. EN 1488:2000 BUILDING VALVES - EXPANSION GROUPS - TESTS AND REQUIREMENTS
    DIN EN 806-4:2010-06 Specifications for installations inside buildings conveying water for human consumption - Part 4: Installation
    13/30261510 DC : 0 BS EN ISO 10239 - SMALL CRAFT - LIQUEFIED PETROLEUM GAS (LPG) SYSTEMS
    13/30276940 DC : 0 BS EN 16125 - LPG EQUIPMENT AND ACCESSORIES - PIPEWORK SYSTEMS AND SUPPORTS - LPG LIQUID PHASE AND VAPOUR PRESSURE PHASE
    DIN EN 16146:2015-02 Sanitary tapware - Extractable shower hoses for sanitary tapware for supply systems type 1 and type 2 - General technical specification; German version EN 16146:2012+A1:2014
    DIN EN 16125:2016-03 LPG EQUIPMENT AND ACCESSORIES - PIPEWORK SYSTEMS AND SUPPORTS - LPG LIQUID PHASE AND VAPOUR PRESSURE PHASE
    UNE-EN 13618:2017 Flexible hose assemblies in drinking water installations - Functional requirements and test methods
    I.S. EN 16125:2015 LPG EQUIPMENT AND ACCESSORIES - PIPEWORK SYSTEMS AND SUPPORTS - LPG IN LIQUID PHASE AND VAPOUR PRESSURE PHASE
    I.S. EN 16146:2012 SANITARY TAPWARE - EXTRACTABLE SHOWER HOSES FOR SANITARY TAPWARE FOR SUPPLY SYSTEMS TYPE 1 AND TYPE 2 - GENERAL TECHNICAL SPECIFICATION
    I.S. EN ISO 23553-1:2014 SAFETY AND CONTROL DEVICES FOR OIL BURNERS AND OIL-BURNING APPLIANCES - PARTICULAR REQUIREMENTS - PART 1: AUTOMATIC AND SEMI-AUTOMATIC VALVES (ISO 23553-1:2014)
    PREN 331 : DRAFT 2013 MANUALLY OPERATED BALL VALVES AND CLOSED BOTTOM TAPER PLUG VALVES FOR GAS INSTALLATIONS FOR BUILDINGS
    PREN 12288 : DRAFT 2009 INDUSTRIAL VALVES - COPPER ALLOY GATE VALVES
    ISO 10239:2014 Small craft Liquefied petroleum gas (LPG) systems
    BS EN 16125:2015 LPG Equipment and Accessories. Pipework systems and supports. LPG in liquid phase and vapour pressure phase
    16/30337101 DC : 0 BS EN 16436-2 - RUBBER AND PLASTICS HOSES, TUBING AND ASSEMBLIES FOR USE WITH PROPANE AND BUTANE AND THEIR MIXTURE IN THE VAPOUR PHASE - PART 2: ASSEMBLIES
    I.S. EN 806-4:2010 SPECIFICATIONS FOR INSTALLATIONS INSIDE BUILDINGS CONVEYING WATER FOR HUMAN CONSUMPTION - PART 4: INSTALLATION
    I.S. EN 13618:2016 FLEXIBLE HOSE ASSEMBLIES IN DRINKING WATER INSTALLATIONS - FUNCTIONAL REQUIREMENTS AND TEST METHODS
    BS EN 1949:2011+A1:2013 Specification for the installation of LPG systems for habitation purposes in leisure accommodation vehicles and accommodation purposes in other vehicles
    BS EN 14868:2005 Protection of metallic materials against corrosion. Guidance on the assessment of corrosion likelihood in closed water circulation systems
    BS EN 1254-5:1998 Copper and copper alloys. Plumbing fittings Fittings with short ends for capillary brazing to copper tubes
    BS EN 1488:2000 Building valves. Expansion groups. Tests and requirements
    UNE-EN 15001-1:2010 Gas Infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1: Detailed functional requirements for design, materials, construction, inspection and testing
    BS EN ISO 23553-1:2014 Safety and control devices for oil burners and oil-burning appliances. Particular requirements Automatic and semi-automatic valves
    BS EN 13959:2004 Anti-pollution check valves. DN 6 to DN 250 inclusive Family E, type A, B, C, and D
    ISO 23553-1:2014 Safety and control devices for oil burners and oil-burning appliances Particular requirements Part 1: Automatic and semi-automatic valves
    12/30250105 DC : 0 BS ISO 23553-1 - SAFETY AND CONTROL DEVICES FOR OIL BURNERS AND OIL BURNING APPLIANCES - PARTICULAR REQUIREMENTS - PART 1: AUTOMATIC AND SEMI-AUTOMATIC VALVES (ISO/DIS 23553-1:2012)
    BS EN 331:2015 Manually operated ball valves and closed bottom taper plug valves for gas installations for buildings
    DIN EN 12309-2:2016-04 GAS-FIRED SORPTION APPLIANCES FOR HEATING AND/OR COOLING WITH A NET HEAT INPUT NOT EXCEEDING 70 KW - PART 2: SAFETY
    BS EN 1213:2000 Building valves. Copper alloy stopvalves for potable water supply in buildings. Tests and requirements
    BS EN 806-2:2005 Specifications for installations inside buildings conveying water for human consumption Design
    UNE-EN 12309-2:2015 Gas-fired sorption appliances for heating and/or cooling with a net heat input not exceeding 70 kW - Part 2: Safety
    EN 15092:2008 Building valves - Inline hot water supply tempering valves - Tests and requirements
    EN 1775:2007 Gas supply - Gas pipework for buildings - Maximum operating pressure less than or equal to 5 bar - Functional recommendations
    EN 14812:2005+A1:2007 Water conditioning equipment inside buildings - Chemical dosing systems - Pre-set dosing systems - Requirements for performance, safety and testing
    EN ISO 10239:2017 Small craft - Liquefied petroleum gas (LPG) systems (ISO 10239:2014)
    EN 15001-1:2009 Gas Infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1: Detailed functional requirements for design, materials, construction, inspection and testing
    EN 13828:2003 Building valves - Manually operated copper alloy and stainless steel ball valves for potable water supply in buildings -Tests and requirements
    EN 1489:2000 Building valves - Pressure safety valves - Tests and requirements
    EN 14868 : 2005 PROTECTION OF METALLIC MATERIALS AGAINST CORROSION - GUIDANCE ON THE ASSESSMENT OF CORROSION LIKELIHOOD IN CLOSED WATER CIRCULATION SYSTEMS
    EN 806-2:2005 Specification for installations inside buildings conveying water for human consumption - Part 2: Design
    EN 13618:2016 Flexible hose assemblies in drinking water installations - Functional requirements and test methods
    EN 1567:1999 Building valves - Water pressure reducing valves and combination water pressure reducing valves - Requirements and tests
    EN 16125:2015 LPG Equipment and Accessories - Pipework systems and supports - LPG in liquid phase and vapour pressure phase
    EN 1491:2000 Building valves - Expansion valves - Tests and requirements
    EN 1490:2000 Building valves - Combined temperature and pressure relief valves - Tests and requirements
    EN 806-4:2010 Specifications for installations inside buildings conveying water for human consumption - Part 4: Installation
    EN 16145:2012 Sanitary tapware - Extractable outlets for sink and basin mixers - General technical specification
    EN 200:2008 Sanitary tapware - Single taps and combination taps for water supply systems of type 1 and type 2 - General technical specification
    EN ISO 23553-1:2014 Safety and control devices for oil burners and oil-burning appliances - Particular requirements - Part 1: Automatic and semi-automatic valves (ISO 23553-1:2014)
    EN 13959:2004 Anti-pollution check valves - DN 6 to DN 250 inclusive family E, type A, B, C and D
    EN 817:2008 Sanitary tapware - Mechanical mixing valves (PN 10) - General technical specifications
    EN 16146:2012+A1:2014 Sanitary tapware - Extractable shower hoses for sanitary tapware for supply systems type 1 and type 2 - General technical specification
    EN 331:2015 Manually operated ball valves and closed bottom taper plug valves for gas installations for buildings
    DIN EN 13618:2016-05 (Draft) FLEXIBLE HOSE ASSEMBLIES IN DRINKING WATER INSTALLATIONS - FUNCTIONAL REQUIREMENTS AND TEST METHODS
    DIN EN 15092 E : 2008 BUILDING VALVES - INLINE HOT WATER SUPPLY TEMPERING VALVES - TESTS AND REQUIREMENTS
    DIN EN 15092:2008-09 BUILDING VALVES - INLINE HOT WATER SUPPLY TEMPERING VALVES - TESTS AND REQUIREMENTS
    DIN EN ISO 10239:2015-05 SMALL CRAFT - LIQUEFIED PETROLEUM GAS (LPG) SYSTEMS (ISO 10239:2014)
    EN 1254-4:1998/AC:1999 COPPER AND COPPER ALLOYS - PLUMBING FITTINGS - PART 4: FITTINGS COMBINING OTHER END CONNECTIONS WITH CAPILLARY OR COMPRESSION ENDS
    09/30198696 DC : 0 BS EN 13618 - FLEXIBLE HOSE ASSEMBLIES IN DRINKING WATER INSTALLATIONS - FUNCTIONAL REQUIREMENTS AND TEST METHODS
    EN 1254-1:1998 Copper and copper alloys - Plumbing fittings - Part 1: Fittings with ends for capillary soldering or capillary brazing to copper tubes
    BS EN 15001-1:2009 Gas infrastructure. Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations Detailed functional requirements for design, materials, construction, inspection and testing
    UNI EN 15092 : 2008 BUILDING VALVES - INLINE HOT WATER SUPPLY TEMPERING VALVES - TESTS AND REQUIREMENTS
    EN 1254-5:1998 Copper and copper alloys - Plumbing fittings - Part 5: Fittings with short ends for capillary brazing to copper tubes
    13/30278752 DC : 0 BS EN 12309-2 - GAS-FIRED SORPTION APPLIANCES FOR HEATING AND/OR COOLING WITH A NET HEAT INPUT NOT EXCEEDING 70 KW - PART 2: SAFETY
    04/30114458 DC : 0 EN 14905 - COPPER AND COPPER ALLOYS - PLUMBING FITTINGS - RECOMMENDED PRACTICE FOR THE INSTALLATION OF COPPER AND COPPER ALLOY PLUMBING FITTINGS
    03/118682 DC : DRAFT JAN 2004 PREN 14868 - PROTECTION OF METALLIC MATERIALS AGAINST CORROSION - CORROSION LIKELIHOOD IN WATER RECIRCULATION SYSTEMS
    07/30168416 DC : 0 BS EN 1264-4 - WATER BASED SURFACE EMBEDDED HEATING AND COOLING SYSTEMS - PART 4: INSTALLATION
    UNI EN 806-2 : 2008 SPECIFICATION FOR INSTALLATIONS INSIDE BUILDINGS CONVEYING WATER FOR HUMAN CONSUMPTION - PART 2: DESIGN
    UNE-EN 16145:2014 Sanitary tapware - Extractable outlets for sink and basin mixers - General technical specification
    UNI EN 16146 : 2014 SANITARY TAPWARE - EXTRACTABLE SHOWER HOSES FOR SANITARY TAPWARE FOR SUPPLY SYSTEMS TYPE 1 AND TYPE 2 - GENERAL TECHNICAL SPECIFICATION
    BS EN 1949 : 2011 SPECIFICATION FOR THE INSTALLATION OF LPG SYSTEMS FOR HABITATION PURPOSES IN LEISURE ACCOMMODATION VEHICLES AND ACCOMMODATION PURPOSES IN OTHER VEHICLES
    DIN EN 1254-4:1998-03 Copper and copper alloy plumbing fittings - Part 4: Fittings combining other end connections with capillary or compression ends
    DIN EN 806-2:2005-06 Specification for installations inside buildings conveying water for human consumption - Part 2: Design
    BS EN 1775:2007 Gas supply. Gas pipework for buildings. Maximum operating pressure less than or equal to 5 bar. Functional recommendations
    BS EN 200:2008 Sanitary tapware. Single taps and combination taps for water supply systems of type 1 and type 2. General technical specification
    BS EN 12309-2:2015 Gas-fired sorption appliances for heating and/or cooling with a net heat input not exceeding 70 kW Safety
    BS EN 1254-1:1998 Copper and copper alloys. Plumbing fittings Fittings with ends for capillary soldering or capillary brazing to copper tubes
    BS EN 1491:2000 Building valves. Expansion valves. Tests and requirements
    BS EN 1286:1999 Sanitary tapware. Low pressure mechanical mixing valves. General technical specification
    DIN EN 14812:2007-09 WATER CONDITIONING EQUIPMENT INSIDE BUILDINGS - CHEMICAL DOSING SYSTEMS - PRE-SET DOSING SYSTEMS - REQUIREMENTS FOR PERFORMANCE, SAFETY AND TESTING
    EN 1213:1999 Building valves - Copper alloy stopvalves for potable water supply in buildings - Tests and requirements
    DIN EN 13959:2005-01 Anti-pollution check valves - DN 6 to DN 250 inclusive - Family E, type A, B, C and D; German version EN 13959:2004
    DIN EN 13618:2017-03 FLEXIBLE HOSE ASSEMBLIES IN DRINKING WATER INSTALLATIONS - FUNCTIONAL REQUIREMENTS AND TEST METHODS
    EN 1949:2011+A1:2013 Specification for the installation of LPG systems for habitation purposes in leisure accommodation vehicles and accommodation purposes in other vehicles
    UNE-EN 16146:2013 Sanitary tapware - Extractable shower hoses for sanitary tapware for supply systems type 1 and type 2 - General technical specification
    UNE-EN 16125:2020 LPG Equipment and Accessories - Pipework systems and supports - LPG in liquid phase and vapour pressure phase

    Standards Referencing This Book - (Show below) - (Hide below)

    EN 1254-3:1998 Copper and copper alloys - Plumbing fittings - Part 3: Fittings with compression ends for use with plastics pipes
    EN 1254-4:1998/AC:1999 COPPER AND COPPER ALLOYS - PLUMBING FITTINGS - PART 4: FITTINGS COMBINING OTHER END CONNECTIONS WITH CAPILLARY OR COMPRESSION ENDS
    EN 1254-5:1998 Copper and copper alloys - Plumbing fittings - Part 5: Fittings with short ends for capillary brazing to copper tubes
    EN 1057:2006+A1:2010 Copper and copper alloys - Seamless, round copper tubes for water and gas in sanitary and heating applications
    EN 1254-1:1998 Copper and copper alloys - Plumbing fittings - Part 1: Fittings with ends for capillary soldering or capillary brazing to copper tubes
    EN ISO 9002:1994/AC:1997 QUALITY SYSTEMS - SPECIFICATION FOR PRODUCTION AND INSTALLATION
    ISO 9002:1994 Quality systems — Model for quality assurance in production, installation and servicing
    EN ISO 9001:2015 Quality management systems - Requirements (ISO 9001:2015)
    ISO 6509:1981 Corrosion of metals and alloys Determination of dezincification resistance of brass
    ISO 9001:2015 Quality management systems — Requirements
    EN 12164:2016 Copper and copper alloys - Rod for free machining purposes
    EN ISO 6509 : 1995 CORROSION OF METALS AND ALLOYS - DETERMINATION OF DEZINCIFICATION RESISTANCE OF BRASS
    PREN 12449 : DRAFT 2011 COPPER AND COPPER ALLOYS - SEAMLESS, ROUND TUBES FOR GENERAL PURPOSES
    ISO 6957:1988 Copper alloys Ammonia test for stress corrosion resistance
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective